Super nice. Once in while i get defective laptops in my shop and can’t figure it out. Thanks to you i see much more options to test and possibly fix it
I am constantly amazed with all the liquid damaged laptops I see being worked on. I have never damaged a single electronic device by spilling liquid on it. In fact I still use a 2009 HP pavilion that works as good today as the day I got it. I've only had to replace the battery and I've had plenty of liquids around it. I'll never get used to the idea that people are so careless around devices that cost so much.
Hi Sorin! Love your channel and the way you deal with repairs. Last two videos i've notices a HIGH PITCHED "COIL WHINE" in your videos which hasn't been there before, so you should probably check what's goin' on. Keep up the good work!
wow extremely easy to disassemble, clean the dust and replace the thermal paste if needed I'm thinking on buying this for video/photo editing but hesitant because of display not having enough color coverage for me ;c
Thanks Sorin. Once I upgraded the ram for my laptop, I accidently dropped a sweat on to the board next to the ram pin...ding-dong...one ram slot was dead after that :v no more upgrade anymore. sad!
At that time, I did not realize that the sweat drop on the mainboard ^^, so just installed the ram and turned it on and then knowing the slot was unable to work properly, then tried to swap the ram and both 2 rams still worked properly with the one slot left. it was my very old core 2 dual laptop with only 2GB of ram and about to give it to my little sister to learn online. So I just stopped install the 2nd 2GB ram stick and left the laptop run with only 2GB on the workable slot. It runs windows 7 and for some software for education still works goods. One lesson for upgrading anything for the laptop ^^...be cool and not drop any sweats when trying to remove tiny wire and components :v
Another informative video , thanks. Question! Watching the way you R&R on-board RAM IC’s, would it be possible for a person to increase the factory RAM of a laptop by) R&R’ing factory 1GB chips (4x1GB=4GB) with 2GBchips(4x2GB=8G)
I spilled water on the corner where monitor part connects with bottom part. A bit got inside that hole. I see it has a battery there. I'll let it sit to dry for sure but what else can I do?
There is a chance that at some point in this laptops lifetime that it's had the chassis replaced due to previous liquid damage, maybe had a palm rest replacement? Would be the only explanation really :D
Do hp and dell adapters have the same compatibility issue as the lenovo adapter or can it be just faulty maybe you should cut it and have look inside because i don't think it serves any purpose for a diagnosis if there's no original charger available
Hi Sorin, I have filled out the booking form on your website. I have the same Legion 7, but it is not powering up. Could you please process my booking? I'm from the UK.
I have a problem, I have a legion 5 laptop for repair, it gave an image via hdmi only, we tested the screen and it was short-circuited, we kept testing the laptop, it stopped giving an image via hdmi and after several more tests the chipset burned, which did i do wrong
that kind of liquid damage was done by a bug that live inside the laptop, the bug does it when it take a dump on the motherboard I daw a video of that many time even it happened live in one of Louis Rossmann stream
Guys I need help, My lenovo legion 7 2021 model is giving issue. Back story: Updated nvidia drivers from g force experience. Windows update kept showing the same driver and when I tried updating it it failed to installed. Checked for updates on g force experience it said latest drivers already Installed. Checked on lenovo vantage same status as on windows update. Didn't gave much thought to it and kept using the laptop. It went into sleep mode due to In activity and when I tried to wake it up it didn't give any display. Used the 60 second power button trick to bring back the display it worked but as soon as the windows boot up it gave blue screen error and after restart went to black screen mode. Reinstalled the windows and updated everything again, worked fine for a few hours. Played a game it shutdown automatically and then again black screen and then after power button trick again blue screen error. Everytime I restart It gave different blue screen error. Tried installing windows again but it stucked mid way. Tried shuffling the rams in slots, after multiple attempts managed to install the windows but black screen everytime. Current situation: Black screen on startup When I try to go into bios it hangs. Please advise there is no lenovo service center in my country and local repair shops are unable to identify the problem. They tried different rams but the issue remains the same
That pl202 is a component close to the RAM cover right? That is a hard task for a quick repair (unless you know someone competent enough to solder the capacitor back together - without damaging the board in a long run). Assuming your laptop still has warranty, I suggest you just let the repair center fix it for you (90% of the time, you'll get a replacement Motherboard). My condolences, since I own the same laptop, and have tried to fix it due to BIOS issue (causing constant blackscreen), In the end, I got my replacement board... good result all and all, but still, these kind of accident sucks.
Super nice. Once in while i get defective laptops in my shop and can’t figure it out. Thanks to you i see much more options to test and possibly fix it
Glad your home business is starting up well.
Fixed a laptop with coffee damage this week. Water is one thing but coffee is messy. Still got it working thanks to all these videos
I think an ant crawled in and peed on the io chip
"Bridges are nice" lol, another spirit words from Sorin, nice job as always.
Thanks for video, this is just what I was needing as I want to redo the thermal paste as I have had mine daily gaming for 2 years straight.
I am constantly amazed with all the liquid damaged laptops I see being worked on. I have never damaged a single electronic device by spilling liquid on it. In fact I still use a 2009 HP pavilion that works as good today as the day I got it. I've only had to replace the battery and I've had plenty of liquids around it. I'll never get used to the idea that people are so careless around devices that cost so much.
Human animal sometimes.🤗
Accidents do happen from time to time, but you can easily avoid this by following 1 easy rule, no food/drinks while using the laptop.
Thanks soring for sharin❤..always good for checking under microscope..some faults hard to see!!.
Started with Rossmann then Northridgefix and now this channel as my goto place for playing repair videos in the background while I code.
Hi Sorin! Love your channel and the way you deal with repairs. Last two videos i've notices a HIGH PITCHED "COIL WHINE" in your videos which hasn't been there before, so you should probably check what's goin' on. Keep up the good work!
Hi bro i own Lenovo IdeaPad gaming3 and accidentally damaged pl202 component what to do ?? My laptop is working fine.just bought 2 months ago
@@caldomgaming9471pl is an inductor. sometimes you can make jumper and it will fix temporary repair
@@caldomgaming9471just asking for RMA, that laptop have ADP warranty if I remember it correctly
Still the best tech pc repair
sorin is backk!
wow extremely easy to disassemble, clean the dust and replace the thermal paste if needed
I'm thinking on buying this for video/photo editing but hesitant because of display not having enough color coverage for me ;c
David (the laptop owner) will be or already is happy that his device works ;-)
Sorin. Well done my dear friend this is what I expected from you.This laptop malfunction will not defeat you👏💪👍
I love this when he says we have picture.. that's crazy 😂😂
thx for great video
We have picture! I can’t believe it…
good job ...fascinated
Thanks Sorin.
Once I upgraded the ram for my laptop, I accidently dropped a sweat on to the board next to the ram pin...ding-dong...one ram slot was dead after that :v no more upgrade anymore. sad!
did you clean with iso alcohol before powering it on?
At that time, I did not realize that the sweat drop on the mainboard ^^, so just installed the ram and turned it on and then knowing the slot was unable to work properly, then tried to swap the ram and both 2 rams still worked properly with the one slot left. it was my very old core 2 dual laptop with only 2GB of ram and about to give it to my little sister to learn online. So I just stopped install the 2nd 2GB ram stick and left the laptop run with only 2GB on the workable slot. It runs windows 7 and for some software for education still works goods. One lesson for upgrading anything for the laptop ^^...be cool and not drop any sweats when trying to remove tiny wire and components :v
Good job mate 👍
King of the Liquids Damage :D
Trying to repair my own laptop, already messed it up😅. It's a Acer Nitro 5 AN 5155. Guess this one will be sacrificed in the pursuit 😂
Sorin, in you last videos you start to have a annoying sound in background. Is very low but as soon as you notice, you can't stop earing it
Another informative video , thanks. Question!
Watching the way you R&R on-board RAM IC’s, would it be possible for a person to increase the factory RAM of a laptop by) R&R’ing factory 1GB chips (4x1GB=4GB) with
2GBchips(4x2GB=8G)
I bet the owner cleaned the laptop earlier.
15:23 THE REALTEK AUDIO CHIP HAS LIQUID DAMAGE TOO...😶😶😶😶
We have picture, it's so cute
awesome info
I see it ones on a MacBook, audio board, one tiny spot - a dead MacBook. this is from high humility
loooool - always so easy 🥰
thank you :)
Hello. Nice laptop
Nice
I spilled water on the corner where monitor part connects with bottom part. A bit got inside that hole. I see it has a battery there. I'll let it sit to dry for sure but what else can I do?
There is a chance that at some point in this laptops lifetime that it's had the chassis replaced due to previous liquid damage, maybe had a palm rest replacement? Would be the only explanation really :D
Do hp and dell adapters have the same compatibility issue as the lenovo adapter or can it be just faulty maybe you should cut it and have look inside because i don't think it serves any purpose for a diagnosis if there's no original charger available
God Sorin please repair some ev chargers
Is there any merchandise with "Let's plug the charger!" or "We have picture!"?
How about: Hot Glue!
Or "I cant believe"
"Dont worry i will replace cap"
Hi Sorin,
I have filled out the booking form on your website. I have the same Legion 7, but it is not powering up. Could you please process my booking? I'm from the UK.
Come to Besiktas,Sorin..
I have a problem, I have a legion 5 laptop for repair, it gave an image via hdmi only, we tested the screen and it was short-circuited, we kept testing the laptop, it stopped giving an image via hdmi and after several more tests the chipset burned, which did i do wrong
What's your origin? Eastern Europe? Anyway, you are good. Congrats!
Romania
"Bridges are nice" Build a few, burn a few. Yes Bridges are nice but not nice between pins.
that kind of liquid damage was done by a bug that live inside the laptop, the bug does it when it take a dump on the motherboard I daw a video of that many time even it happened live in one of Louis Rossmann
stream
Lmao Oh this has got to be one of the funniest things i've ever heard.
👏👏👏👏👏
I HAVE THIS LAPTOP!!!
؟؟؟؟؟؟؟؟؟
i saw a 0.7 Ohms on GPU coil at 6:43 .... how can it be working
Could be from humidity if the owner is living near the cost line
Your microphone is making a coil noise or something. It burns my ears :)
water damage from condensation ( the room is too cold & laptop is too hot)
👍👍
i saw the water damage in the center
HELLO!
I like the title 😂
🤩
Guys I need help,
My lenovo legion 7 2021 model is giving issue.
Back story:
Updated nvidia drivers from g force experience.
Windows update kept showing the same driver and when I tried updating it it failed to installed.
Checked for updates on g force experience it said latest drivers already Installed.
Checked on lenovo vantage same status as on windows update.
Didn't gave much thought to it and kept using the laptop. It went into sleep mode due to In activity and when I tried to wake it up it didn't give any display.
Used the 60 second power button trick to bring back the display it worked but as soon as the windows boot up it gave blue screen error and after restart went to black screen mode.
Reinstalled the windows and updated everything again, worked fine for a few hours.
Played a game it shutdown automatically and then again black screen and then after power button trick again blue screen error. Everytime I restart It gave different blue screen error.
Tried installing windows again but it stucked mid way.
Tried shuffling the rams in slots, after multiple attempts managed to install the windows but black screen everytime.
Current situation:
Black screen on startup
When I try to go into bios it hangs.
Please advise there is no lenovo service center in my country and local repair shops are unable to identify the problem.
They tried different rams but the issue remains the same
Nice💪💪💪👍👍👍
Hi sir i own Lenovo IdeaPad gaming3 and accidentally damaged pl202 component what to do ?? My laptop is working fine.just bought 2 months ago
That pl202 is a component close to the RAM cover right? That is a hard task for a quick repair (unless you know someone competent enough to solder the capacitor back together - without damaging the board in a long run). Assuming your laptop still has warranty, I suggest you just let the repair center fix it for you (90% of the time, you'll get a replacement Motherboard).
My condolences, since I own the same laptop, and have tried to fix it due to BIOS issue (causing constant blackscreen), In the end, I got my replacement board... good result all and all, but still, these kind of accident sucks.
Another crazy easy ^_^
Nice. 😆
First of all
Remove all peripherals like battery, rams, SSD etc
Noice
I think this was damage from factory
❤have a pizza sir
😭😭😭liquid damage!
Looooool
Hello🤝👍👍👍👏👏👏👋👋👋👋👋