Ford S Max 2.0 P244C:00-6D Exhaust Temperature Too Low For Particulate Filter Regeneration Bank 1

P246C:00-AF Particulate Filter Restriction Forced Power Limit
P246B:00-2F Vehicle Conditions Incorrect For Diesel Particulate Filter Regeneration
P2463:00-AF DPF Diesel Particulate Filter Soot Accumulation
P244C:00-6D Exhaust Temperature Too Low For Particulate Filter Regeneration Bank 1
Ford S Max & Galaxy 2.0 tdci hdi
you can buy Launch products here...
www.launchtech...

[@ORileysAutos]

You can buy Launch products here..
www.launchtech.co.uk/technical-fluids/dpf-gun-particulate-filter-cleaning-fluid/

[@restart5475]

another good job done mate i enjoy watching someone else doing same stuff as me ,and your right mate most garages just want to turn the the codes off and charge where as you you diagnose test and then repair, great work very knowledgeable man cheers Jim.

[@thecannetwork7559]

I believe you experienced no noise or operation of the dpf fuel pump when you activated it with your launch. I also experienced this when I tried to test the pump with actuating on my Autel. I checked the signal at the same time and although the pump was silent there was actually a signal to control it - a pwm. However the duty cycle was quite low, not enough to run the pump.
Concerned that I was facing a fault with the pump and the blocked vapouriser I had the opportunity to control the actuations with a snapon diagnostic and under the control of this tool I did manage to actuate the pump and confirm the pump and control signal the ecu to be ok.
The issue is with the choice of diagnostic tool used to actuate the pump.

[@careyautorepairs]

I just saved this video what a great bit on knowledge. You should start your own training school course teaching others how to start a DPF cleaning business and have a private Facebook group for members to share knowledge and network id definitely buy it from you and join the group you would make a fantastic teacher and could crate lots of employment around the world.

[@larrysimon1]

Top man ..........Great work thru to cure the fault 👍

[@alextripp1230]

Interesting videos, top work nice to see someone who knows what they are doing. Alex.

[@jimmoore8943]

Great work very interesting love your channel all the best jim

[@motosystemltd]

Very informative, thank You sir, I have 2.0 TDCi 2007 year and have no feed / power supply to this valve, searching the wiring diagrams and cannot find fifth injector (pump feed) in PCM wirings. weird...

[@brentsmith5647]

A brilliant man love watching and learning thank you very much♥️👀👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@ORileysAutos]

My pleasure

[@scorpyonsi]

I also have a question, I took the vaporizer down, tested it and it works fine, I changed the pressure sensor, could it be the pump or the fuse?

[@AhmedAli-hu8ng]

Great job boss but do for me one video for new model Audi and vw 2 dpf sensor with the one sensor is connecting with single pipe and one pipe is mt please boss

[@iferogames8578]

What if the gas temperature 11 and 12 shows -40 and not moving ,is this cause of vaporizer or dpf or pressure differential sensor? Plz help

[@user-nm7ki9re2z]

Что у Вас за диагностический прибор?

[@ziadafzal]

Hi mate i need your help please. Got ford transit 2013. I replaced fuel vaporizer and pump, clean dpf. All fine no faults any more but as soon as the van gets to temperature its starts smoking badly(white smoke) smells diesel. What i need to do? Please. 🙏🏻

[@ORileysAutos]

Does the smoke clear away ?

[@ziadafzal]

@@ORileysAutos not until i reset the dpf that it has new dpf through computer

[@ziadafzal]

Or when i turn the van off and let i cool then it stops till it reaches temperature

[@w.a7795]

Could be your lambda sensor mate as symptoms do look like it