Boxing in guide + How much £ i made
ฝัง
- เผยแพร่เมื่อ 8 ก.พ. 2025
- Subscribe if you're awesome : youtube.com/@t...
Hello and thank you for watching this video. in this video I will try my best to give some basic inside on how I do my boxing inn. I hope at the end of this video everyone who watches start to finish will be able to box in basic pipe work lay outs.
for this video I charged £120 labour
MDF costed £30
Timber , glue and fixings round about £20
Total £170
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
my best videos in my opinion:
[ • Day in the life of a s... ]( • Day in the life of a s... )
[ • How i fit doors and ho... ]( • How i fit doors and ho... )
[ • A Day in the life of a... ]( • A Day in the life of a... )
[ • Easy way to build floa... ]( • Easy way to build floa... )
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Ways to support the channel:
📹 Patreon Link :
👕 Clothing Website: [justgrafting.com](justgrafting.com/)
(⚠️ i recommend getting a size higher than usual⚠️)
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
All The Tools and Equipment seen in this video is in my amazon shop if you choose to purchase I will get a very small commission:
🛍️ Amazon shop link: www.amazon.co....
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
All my other social media platforms
📱 TikTok Link : [www.tiktok.com...](www.tiktok.com...)
📸Instagram Link :[ / tj.building.services.r... ]( / tj.building.services.r... )
🤳Twitter Link [ / ttdowgoffical ]( / ttdowgoffical )
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
my website here you can book me: (please bare in mind I get very busy)
🧑💻 website link : [tjbuilding.wor...](tjbuilding.wor...)
you can also get money off your own website if you use my code TBS50
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
THANKYOU FOR WATCHING
Young man, journey man, i could pick points like others but i was also there many years ago, respect to you sir, this trade will take you far, i hope the joy of being able to build anything gives you the pleasure it has me. subed.
Fantastic! Thanks! 🎸🎶🔨
We've all got to start somewher.... good on u,,,,
Just curious why you wouldn't take the tall boxing to the wall? It would look a lot neater not having the small gap beside it
Looking forward to seeing the new content 👍
Carpenter of 40yrs. Always best practice to keep a dust mask handy, they really are your friend.
Great job!
Should have used a slightly bigger timber so it was thick enough to run down the wall in one run rather than having a step
Also should box it right into other wall and make it look more structural rather than an add on
Good work mate
Really enjoying the vids man, keep it up. Just some feedback on the editing, it might be worth adjusting your mix a bit as the music is very loud compared to your voice, also I know it ain't cheap but it might be worth investing in some more music as the content is really good but the same non copyright music does get a bit boring after a few vids. Appreciate the content though, I'm just starting up myself and it's nice seeing someone who's already established and being able to learn from you.
Oh man, after I moved I ripped so much boxing out and hid all pipes and cables into the wall. Looks a neat job though and everybody has budgets.
yep definitely looks better being chased in to the wall but budgets
It’s called a Chase now let’s watch brother !
Which nail gun do you like better
I just moved to the UK and I want to do an apprenticeship in carpentry. Could you let me know how you go about getting one over here? Can you get one online or is it all about who you know?
great vids dude, are you going to the Installer show? we are going tuesday, hopefully catch you there..??
Your videos are always great you forgot how much did you make 👍👍👍🙏🙏
10:16
Am looking to get some of these oak colour looking slats on the wall then tv ontop please share some advise and video if possible 😊
would have fitted vertical box into corner
Yes I'd have done the same, why have the sticky barcode label on the outside as well?
Can you please make a video onnhoe to fit a frame
What timber would you use to make a frame for a bath panel
2by2 I’d say
@@o0o5T3V3o0o Thin tiling lath, easier to nail.
Yes that bnq cutting is a hack.....if the guy that’s qualified to use the saw is there, usually isn’t though
Make the boxing first mate then fix the boxing to the wall
Genuine question. Why do you sometimes have your hood up indoors when you’re working?
What sort question is that
@@truth3358 genuinely interested to know
It's a bit off putting when working in somebody's House.
Yes, that is a genuine question that I would like to hear the answer too.
Maybe to keep all the saw dust and other crap out of his hair , some of these sites are a shitty place to work.... 😜
You have made a simple job to a long job
Why you use 2 nail guns ,dewalt and ryobi?
One is probably a 16 gauge the other an 18 gauge Ryobi actually do the best nail gun for the money in my opinion I use the 16 gauge to tack stuff up and it's never let me down in the two years iv owned it
"PromoSM" 😚