Shared your video with the home gym discord. This is probably the most in depth comparison of attachment compatibility between rep and Titan on rogue racks. Great video
I’ve been doing research on a good solid rack for the last several months. I’m still torn between Rep, Rogue & Titan, however, I’m leaning heavily towards Rep. They’re PR - 4000 looks to be solid. I am though looking for an adjustable pull up bar that can be easily be moved by changing out the pins. Both Rogue & Titan have one, but REP doesn’t. Can you give any advice as to whether Rogue’s or Titans adjustable pull up bar will work on the REP Fitness PR-4000 30 inch rack?
I would go with the Rogue Monster Lite kids pull up bar. It may have a little room around the upright, but you can add your own felt to make it snug. Also it can hold a ton of weight (500lbs). I hope this helps!
Hey Danes great video!!! I bought Titan lever arms on a deal but haven’t made a rack choice. Do you know if rep or rogue would be best for mounting the Titan arms? I’m having a really hard time deciding which rack to choose. Seems Rep is offering more attachments and you save a bit more but these Titan lever arms will probably be the determining factor as to which rack is compatible. Thanks
Thanks for the comment 👊 I’ve never tried or seen lever arms up close, so can’t give u an educated opinion…but I do know that Titan copies rogue a ton, so they would fit rogue nicely. I do think u should have no problems either going with rep, but the uprights are a little smaller than rogue and Titan, so there may be some more room to give. Hope this helps.
I've recently come across this for a rack attachable nordic curl bar I make. It seems as though REP Fitness's holes are not true 2" on center? It seems like you found the same? Are Rogue and Titan true 2" on center?
Correct. Rep are slightly off. Rogue are true 2” inch on center, and the only titan attachment I have that gets bolted on is the barbell holder and the holes line up perfectly, so my guess is titan copies rogue and is 2” as well. I hope this helps.
I got Rep4000 and wanted to know if I can match Titan weight holders to it. The bolt spacing is what I am worried about. I know that even Rep attachments have issues sizing with different rep generation builds.
Awesome video and I really need your help when you get a chance: Will PR5000 V2 Crossmemmbers fit on my rogue monster RM6? Not worried about length etc, only concerned if the hole spacing will work with reps bolts? I am looking to purchase there front feet stabilizers but wanna make sure each 2 holes will fit on the rogue rack. Thank you SO MUCH
Yes they should work no problem in regards to the holes, looks like its four hole so that would be similar to the barbell holder I attached in my video. Check this one out in regards to the feet th-cam.com/video/j-mftvdU9Vc/w-d-xo.html I hope this helps, lmk!
Its not a specific brand, actually has no name at all. I had it custom made overseas...was at first a work project but ended up being for home. I was looking for a rack that could do it all in a smaller foot print. I was not able to find it here in the US. The rack took 5 months to get here, and could have been easily been lost in the supply chain madness I guess. It was a big gamble and although I like it a lot, I am not sure I would do it again. I hope this helps. Also, I'll make a video about it soon and show it more in case that has some interest.
Do u know if the titan 3x3 attachments will fit the rep fitness pr5000 3x3? I am selling my selectorized titan lat pull down and titan foldable 3x3 rack to get pr5000 with selectorized lat pull down attachment. I have many titan x-3 rack attachments that I would like keep (5/8") however I would have to buy thoese adapters to make my 5/8" to 1" I think it will be cheaper than buying them again for the pr5000.
Man great video bro. Iam thinking of buying rm-3 monster Or fortis rack and the drop in rhino belt squat with slinger to add lat pul down like coop did🙂 I want a get plate storage pegs, rollers, barbell storage and spotter arms but rogue acessories/attachments so expensive so I was wondering if titan wiould fit rogue monster rack..Thank u By the way also been looking at the 4 post rep fitness with ares and bet squat attachment..deliciooms, decisions 🤔
Thanks man 👍 yes, there are so many things to take into consideration with a solid home gym 😵💫😵💫😵💫 The Titan attachments that I have fit great in rogue. Almost like they were made for them. And since Titan likes to copy rogue it makes sense. I always want the base to be the best quality and then the attachments can be either, meaning no big deal if a cheap attachment is not well, would rather have that than not be happy with the uprights etc. I think you’ll end up with a badass setup 💪💪💪
![ถามตรงๆ กับ อาจตุพร ทำไม ประเทศไทย ใครเป็นนายก ก็โดนด่า พอออกเเล้วคนคิดถึง!!?? l [Nickynachat]](http://i.ytimg.com/vi/3YFLMXxBGAs/mqdefault.jpg)
New name. More Videos. Let’s go. Time stamps below:
0:00 Intro
0:37 Rep J-cups
1:39 Rep Spotter Arms
2:18 Hardware differences
3:04 Amazon Washers and Hitchpins
3:53 Rogue Monster Attachment Post
4:24 Weight Storage
5:48 Titan Youth Pull-up Bar
7:00 Barbell holders
I was gonna say I didn’t recall subbing to this channel. Glad to see you back in action.
🤣 thank you 👊
Shared your video with the home gym discord. This is probably the most in depth comparison of attachment compatibility between rep and Titan on rogue racks. Great video
Thanks so much for the comment and support 🙏
Hey, just wanted to say thanks for covering this. The REP attachments up to 6 inches line up perfectly hahaba
🙏👍 thanks for watching
Dude, you are literally a lifesaver (of my wallet lol). Thank you so much for this video! I was looking for this information. 🙌
Thanks for letting me know and Glad I could help man 👊
Excellent job.
thank you
I’ve been doing research on a good solid rack for the last several months. I’m still torn between Rep, Rogue & Titan, however, I’m leaning heavily towards Rep. They’re PR - 4000 looks to be solid. I am though looking for an adjustable pull up bar that can be easily be moved by changing out the pins. Both Rogue & Titan have one, but REP doesn’t. Can you give any advice as to whether Rogue’s or Titans adjustable pull up bar will work on the REP Fitness PR-4000 30 inch rack?
I would go with the Rogue Monster Lite kids pull up bar. It may have a little room around the upright, but you can add your own felt to make it snug. Also it can hold a ton of weight (500lbs). I hope this helps!
Good informative video. Question- Do you think the Rep Leg Rollers Pr-5000 size will fit a Rogue monster rack ?
Thanks and yes, they should fit 👍
Hey Danes great video!!! I bought Titan lever arms on a deal but haven’t made a rack choice. Do you know if rep or rogue would be best for mounting the Titan arms? I’m having a really hard time deciding which rack to choose. Seems Rep is offering more attachments and you save a bit more but these Titan lever arms will probably be the determining factor as to which rack is compatible. Thanks
Thanks for the comment 👊 I’ve never tried or seen lever arms up close, so can’t give u an educated opinion…but I do know that Titan copies rogue a ton, so they would fit rogue nicely. I do think u should have no problems either going with rep, but the uprights are a little smaller than rogue and Titan, so there may be some more room to give. Hope this helps.
@@DanesinTexas thanks Danes hope your handling the bad weather in TX
@@HeCoversMe we didn’t get hit too hard yesterday 🙏
@@DanesinTexas 👍
I've recently come across this for a rack attachable nordic curl bar I make. It seems as though REP Fitness's holes are not true 2" on center? It seems like you found the same? Are Rogue and Titan true 2" on center?
Correct. Rep are slightly off. Rogue are true 2” inch on center, and the only titan attachment I have that gets bolted on is the barbell holder and the holes line up perfectly, so my guess is titan copies rogue and is 2” as well. I hope this helps.
Didnt mention if the rep weight horn for the 5000 work on the rogue 3x3?
I got Rep4000 and wanted to know if I can match Titan weight holders to it. The bolt spacing is what I am worried about. I know that even Rep attachments have issues sizing with different rep generation builds.
Awesome video and I really need your help when you get a chance: Will PR5000 V2 Crossmemmbers fit on my rogue monster RM6? Not worried about length etc, only concerned if the hole spacing will work with reps bolts? I am looking to purchase there front feet stabilizers but wanna make sure each 2 holes will fit on the rogue rack. Thank you SO MUCH
Yes they should work no problem in regards to the holes, looks like its four hole so that would be similar to the barbell holder I attached in my video. Check this one out in regards to the feet th-cam.com/video/j-mftvdU9Vc/w-d-xo.html I hope this helps, lmk!
Good morning. I really like the set up of your new power rack machine can you tell me what brand and model it is? Thanks
Its not a specific brand, actually has no name at all. I had it custom made overseas...was at first a work project but ended up being for home. I was looking for a rack that could do it all in a smaller foot print. I was not able to find it here in the US. The rack took 5 months to get here, and could have been easily been lost in the supply chain madness I guess. It was a big gamble and although I like it a lot, I am not sure I would do it again. I hope this helps. Also, I'll make a video about it soon and show it more in case that has some interest.
@@DanesinTexas thanks for letting me know. It's a very nice looking power rack.
@@erictadlock8137 thank you
How u doing brotha? Hey so all the titan attachments will fit rogue?
Yea pretty much all of them can be used no problem imo. Titan series and the rogue monster are pretty much same specs👍
Do u know if the titan 3x3 attachments will fit the rep fitness pr5000 3x3? I am selling my selectorized titan lat pull down and titan foldable 3x3 rack to get pr5000 with selectorized lat pull down attachment. I have many titan x-3 rack attachments that I would like keep (5/8") however I would have to buy thoese adapters to make my 5/8" to 1" I think it will be cheaper than buying them again for the pr5000.
Also rogue monster and titan series fits ethos power rack
Thanks for sharing that 🙌👍
Just bought s monster and I'm looking for spotter arms, rep is out of stock, which version of titan fits? X3?
@@oscarsuarez9917 titan Series
That is also 3x3 with 1" holes
Oam about to buy a T-3 wall rack which I think is 2x3. Will rigue attachments fit on this, maybe infinity attachments?
Man great video bro. Iam thinking of buying rm-3 monster Or fortis rack and the drop in rhino belt squat with slinger to add lat pul down like coop did🙂
I want a get plate storage pegs, rollers, barbell storage and spotter arms but rogue acessories/attachments so expensive so I was wondering if titan wiould fit rogue monster rack..Thank u
By the way also been looking at the 4 post rep fitness with ares and bet squat attachment..deliciooms, decisions 🤔
Thanks man 👍 yes, there are so many things to take into consideration with a solid home gym 😵💫😵💫😵💫 The Titan attachments that I have fit great in rogue. Almost like they were made for them. And since Titan likes to copy rogue it makes sense. I always want the base to be the best quality and then the attachments can be either, meaning no big deal if a cheap attachment is not well, would rather have that than not be happy with the uprights etc. I think you’ll end up with a badass setup 💪💪💪
@@DanesinTexas thank u
I wonder if the titan attachments fit the pr 4000racks?
@@futbol1972 possibly their x-3 series attachments but don’t know for sure.
Just drill out the hole to 1" on the youth pull up bar and it will work fine.
Good tip. Haven’t had the need for it but others with a rep rack for example could definitely do that. Thanks 👊
@@DanesinTexas I only know because I made things work doing this
Do you know if the rogue monster leg rollers would fit on pr 5000?
Yes it will.
Could you please tell me the diameter of the 1 inch holes on the Rogue Monster uprights please? Is it 27mm / 1.06299 inches?
Close, I’m reading my measuring tape as 26mm. I hope this helps.
@@DanesinTexas Thanks so much! This is a massive help. All the best.
Do u know if titan atrachmwnta fit pr 5000?
Where did you get the 3mm felt tape?
Just added the link in the description👍 Got it from Amazon but you should be able to find it other places as well.