Ray, PLEASE don't ever stop providing video content. The information you provide is priceless. I personally would just like to say thank you for all you do for the firearms community. I hope one day I'm able to take one of your classes and meet you in person !!! 👊🇺🇸🦅👍
Excellent video. Much appreciation to your thorough approach. I learn something every time I watch one of your videos. I bought that same set from Borka and have added pieces to it over time. Mighty useful and confidence inspiring knowing you've torqued everything properly. I want to protect my gear and start off with it correctly torqued. Great optic review, too, Thank you.
Learned a plethora of information on that Ray! Thanks so much for these videos!!! You should have over 100K subscribers for the valuable info you share!!!
I always learn a lot more from this lesser known channels where they actually explain every step and the logic behind it verses some other bigger channels where it's just all about the review aspect and very little attached extra need to knows.
I learned that I have to remove and reset the top caps. Probably wouldn't have noticed had I not watched this video. So, thanks again for the knowledge, sir.
Thanks Ray good stuff. To bad the glass wasn’t clear and crisp. Thanks for the review and the proper way to mount the scope on the F3R mount. Thank you.
Nice job as thanks for taking us on the ride as seems to just not have a clear lens for that market of scope quality....Love the info and detailed vid....Good stuff...
Great video, thanks! I have a Burris XTR II 4-20 with that same reticle. I find that it is a very good scope if you can get it for less than $1,000. In my experience, the glass quality is above average, but nothing to write home about. I do like the 34mm tube and relatively forgiving eye box. When I performed a tall target test, I discovered I needed a auto correction factor of .9912 (using Bryan Litz's technique from his TH-cam video on the subject). From zero-300 yards the error wasn't big, but as you noted, it accumulates and is worse closer to the of the range. At 600+ yards the error is significant enough to miss a 2 MOA target by dialing. Of course, if you hold over, it works just fine. Since then, I've since switched to Vortex Viper PST Gen II with the EBR-2D reticle (MOA). I'm much happier with the glass quality and performance. These days, I strive to use the holdovers as much as possible and avoid dialing. It takes a lot of practice! BTW - I still have my XTR II. It's a good range scope, but not quite up to serious PRS duty, UNLESS you do the work to find the auto correction factor! In my experience, you typically do get what you pay for in scopes. Although I would love to have a Vortex Razor HD budget, the Burris price point got me into PRS sooner and it was better to start shooting and learning than waiting. That was the biggest lesson for me, just get out and shoot whatever you can afford and learn how it works! Hone your fundamentals and when you can get better equipment, it will pay off all the more.
I have the Steiner T5xi in 5-25x56 and 3-15x50 and the glass in those leaves a lot to be desired as well..... Gotta say though... i absolutely LOVE my discontinued Burris 1.5-8x CQ-Mil scopes. Love their dual focal plan mil hash reticle with .25MOA center floating dot. Makes nailing targets out to 850 yards pretty simple.
I literally did the same thing with my XTR2-first look it was milky-also going from my ATACR 4-16x42 and Razor G2. Mine tracks really well-only weakness is glass IMO but it is still very usable. I read that this was the case prior to purchase but paid well under $1k new and couldn't pass up.
My NEW 2024 model, XTR 2 Burris Scope has, very NICE Clarity, even on 20 to 24 powers ( Just Bought it from, Scheel's for $599.00 ). I had heard that, there were some Glass Clarity Issues and, I think that, Burris FIXED, the Later scopes with, Japanese Glass,.. but, Philipines,.. Ground / polished. Love THIS Scope !
Great information and well presented. I just bought my XTR II 4-20X for $889. For its value and price, I wonder its fair to judge the lens quality of Burris against that of a Nightforce or a Razor II ..both of which are the next class of optics and twice the price.
I have all 3 scopes you mentioned and I would not compare the Burris to the other 2. It's got great features for the price which you could compare those but glass wise absolutely not.
As I mentioned before I am a new subscriber. Just wanted to say that your video was very informative. Your style was great especially for someone looking to get into long range shooting. Not sure about your background but I look forward to looking at your past videos and upcoming ones. I saw this scope in my local shop and was wondering how far Burris has come and whether this is a quality scope on par with vortex? Thanks again.
Hello EA. My apologies for the late reply. Dealing with TH-cam strikes at the moment as they are hitting all of the gun channels really hard now. With regards to your question. The Burris XTRII is no where near the same quality as the XTR III or XTR Pro. Vortex makes very good scopes as well. You will be fine with either but just make sure the scope you purchase checks all of the boxes on what you are looking for in a scope. Thanks
I just bought one in 4-20X50 brand new off an auction site for $458 delivered. Could not pass that up. This is my second one. Glass reminds me of my vortex viper pst scopes. Nice but. Not like my Razors. I like the turrets on my Burris better than the vipers. Mostly because there is more elevation.
Nightforce rings on a Burris scope dude? Pure sacrilege ! There's a reason Burris and vortex have such a good warranty, it's because you're gonna need it!
I have an MTac 1-4x with the AR reticle and the glass is beautiful.... holds zero perfectly.... and is relatively light for what it is .... BUT the reticle is sooooo small and thin I have a tough time with my old eyes
What's your thoughts on a scope for a M1A that has a over the receiver scope mount? I'm running the Springfield gen 4 scope mount bracket. My goal with this setup is to reach out 700 yards. I know the M1A socom 16 is not a long-range rifle. The other rifle I'm looking into for longer distances is. Rem 700 sps tactical. What scope do you recommend for that rifle to punch out over 600 yards? I have a bushnell banner 2 4x12x40 on my M1A socom 16 now, and on my 22LR rifle. Witch is not bad. I know I'm going to have to upgrade as I learn and punch out over 400 yards
Would these results be different if you have verified level on your scope base and reticle? I was taught to have the spirit level completely flat when holding the reticle on a plumb line, and to place a level against the target when stapling it to the backboard. Did you take any of these steps before filming? I was interested in one of these scopes and now I'm not so sure with the glass quality you mentioned as well as tracking errors.
I am shocked he showed the mounting of a scope on an informational video like this. I mean at the very least, put it on a nice flat table somewhere and just put a level on the top of the top turret. This was pretty shocking to see and yes, never mount a scope like this if you actually want to use the hold overs. If you plan on shooting anything at distance, scope should be properly mounted.
FYI, you can get this scope for $599-$720 on natchezss.com. it's a blemished model. Price will be $599 for the 4-20 and $719 for the 5-25 XTRII models. I would never pay full price for it, but for $599 this is a hell of an optic and better than the PST which is slightly more expensive.
If you have the time, can you do a scope mounting video using specifically a Vortex Razor HD Gen II, the Vortex Precision rings, and a Savage 110 Elite Precision? To be honest, this is the first scope I have ever bought. I am afraid that I might break something.
@@almostontimehero5415 I can go and find a ton of reviews/opinions on other scopes in the same price range that aren't given out for free so I don't really see your point. Anyway, I will let you get back to your stop the steal chants and screaming at the TV.
Have u ever looked through an arken Ep5? Jus wondering as I’d like an opinion on jus glass vs glass not overview comparison I have the Ep5 but i do t think it has quite clear enough glass for spotting when shooting a 22lr which is what I bought the arken for ima give it a full running but initial impression is it’s no better than other scopes at the same price but for jus a tad more I could get an athlon ares btr or Midas tac and I think that’s what im gonna do if I sell the arken
Pretty substandard review method, honestly. You can't test a scope's tracking accuracy by firing rounds at a target, let alone when you never even leveled the reticle properly. The amount of variables introduced here is substantial.
Think it is a great scope for that price. Lifetime warranty with a lot of features and an easy to set zero stop. The glass isn’t bad for the price point but a little cloudy when it’s shady and above 20x. Please keep in mind I am now sponsored by Burris.
About the time of this video I was told that the glass is inferior to all highend scopes. Burris is aware of that and was told by a rep. that they will be improving the glass that comes from the Philippines. For the cost they cannot afford to be behind Vortex, NightForce and Tract that use german or japanese HD glass
I was worried about your review as I just ordered an xtr ii. Then you said it was worth 1200 and better than pst. I just paid 550 new. So I think I feel a lot better.
I would have been very impressed if it did better than it had. not to come of as a glass snob, but there are better scopes. Cheers brother! Miss ya man !
There definitely are. There are also scopes with better glass that don’t track worth a darn and are useless as an aiming device. Money into tracking first then glass. I think the swfa 5-20 does the best job of both under 1500 but these usually do pretty good. Though this was worse than most tracking tests I’ve seen of the xtr2. Usually have a very good record for tracking. Granted we don’t see his target or know how accurate that rifle is
Turn all the way left then right counting then divided in half same on up and down . 25yrd should be on the money or it has been for me several times. Doing this centers the scope from there adjust for zero.
Hello and thanks for watching and subscribing. They are Borka Kits . I have them occasionally on my website. Otherwise, you can order them through shooterstools.com
So in your opinion what would be the best scope for the money? I am in the market for a new rifle and scope but not sure what to get. I don't want to spend over $600 dollars on a scope, is it even possible to get a good quality high magnification scope for that price?
How can a $1000 burris scope not track perfect? I would be dissapointed, it would go back... 1/2 moa in 5 inches is un acceptable. I would be ok with 1/4 moa in 10 inches...
Why would Burris be giving stuff away at a bushnell match? Does bushnell own burris? I obviously understand the advantages of FFP but what is the advantage of using SFP? Like the Accupoint and a lot of the Trijicon products are SFP...
$600 is a great Deal for this "much" ( a veryTOUGH Scope with, many good, Feature's ) and I, too bought one from, Scheel's, in Missoula Mt. @ $599 Plus,.. Free Shipping. Yes, not quite as clear as some Burris's, on the Higher Powers But, it's NOT a $1,200+ Dollar Scope,.. XTR III, either. You WON'T be missing, because of, .. "Clarity"
I think it's unfair to compare the Gen 2 PST to this, I believe the Vortex is better by far. Also, what camo pattern is on the stock? Thanks for the videos!
Exactly. both my PST and HST Scopes track damn near perfect. I have a NF that cost double the vortex and outside of a slight edge In Clarity the vipers shoot with it all day long. Almost picked up one of these XTR’s. Glad I didn’t now.
I've had two different 4-20 versions and both had some pretty bad chromatic abberation. Currently running a Vortex PST Gen 2 on my 6.5 CM and it's much better glass.
When you’re used to high end glass you will be disappointed with lower price stuff. That’s a fact. I also own an XTR2 and I think the glass sucks, but I’m always shooting with my Kahles k525i and my Minox ZP5.
Uses philippine glass 🤣 what they don't know is that glass made here in the ph (lapu² cebu) actually uses japanese technology as the company who manufactures those glasses are japanese owned.
I am a bit disappointed that you would do box test and give an opinion on the scopes tracking ability without properly mounting and leveling the scope first. Very disappointed.
I agree. That’s a really old video from when I first started the channel. Everything is done by laser and backlighting the reticle now. That was done in March 2020 so 3 years ago and the channel is only four years old. I was complacent.
Ray, PLEASE don't ever stop providing video content. The information you provide is priceless. I personally would just like to say thank you for all you do for the firearms community. I hope one day I'm able to take one of your classes and meet you in person !!! 👊🇺🇸🦅👍
@The Range I Totally Agree👍👊
Man im lovin it got mine at optics planet when they were 513 dollars and love it
Excellent video. Much appreciation to your thorough approach. I learn something every time I watch one of your videos. I bought that same set from Borka and have added pieces to it over time. Mighty useful and confidence inspiring knowing you've torqued everything properly. I want to protect my gear and start off with it correctly torqued. Great optic review, too, Thank you.
Learned a plethora of information on that Ray! Thanks so much for these videos!!! You should have over 100K subscribers for the valuable info you share!!!
I always learn a lot more from this lesser known channels where they actually explain every step and the logic behind it verses some other bigger channels where it's just all about the review aspect and very little attached extra need to knows.
I learned that I have to remove and reset the top caps. Probably wouldn't have noticed had I not watched this video. So, thanks again for the knowledge, sir.
Ray layin down the knowledge, great video as always
Great tip for the loctite; under torque because of lubricity! Never heard that before but makes sense.
Excellent video Ray !
That's a sweet rifle 👍
I'm going watch it again, Thanks.
Really enjoy these informal videos with your precision rifles. Cheers!!
Thanks Ray good stuff. To bad the glass wasn’t clear and crisp. Thanks for the review and the proper way to mount the scope on the F3R mount. Thank you.
Great learning video for new shooters. Keep the good work.
Nice job as thanks for taking us on the ride as seems to just not have a clear lens for that market of scope quality....Love the info and detailed vid....Good stuff...
Thanks for the video Ray! I’m learning I need to keep saving my money and buy once cry once
Thanks for the knowledge an some stuff that i'm doing right , when i install my scopes on my rifles. Two thumbs way up X-Ring !!!!!
Thanks for the lesson, sir! Be safe and stay safe. God Bless!
Love the info in this video. Thank you Ray
My pleasure Reuben
Great info from start to finish!
Great video, thanks! I have a Burris XTR II 4-20 with that same reticle. I find that it is a very good scope if you can get it for less than $1,000. In my experience, the glass quality is above average, but nothing to write home about. I do like the 34mm tube and relatively forgiving eye box.
When I performed a tall target test, I discovered I needed a auto correction factor of .9912 (using Bryan Litz's technique from his TH-cam video on the subject). From zero-300 yards the error wasn't big, but as you noted, it accumulates and is worse closer to the of the range. At 600+ yards the error is significant enough to miss a 2 MOA target by dialing. Of course, if you hold over, it works just fine.
Since then, I've since switched to Vortex Viper PST Gen II with the EBR-2D reticle (MOA). I'm much happier with the glass quality and performance. These days, I strive to use the holdovers as much as possible and avoid dialing. It takes a lot of practice!
BTW - I still have my XTR II. It's a good range scope, but not quite up to serious PRS duty, UNLESS you do the work to find the auto correction factor!
In my experience, you typically do get what you pay for in scopes. Although I would love to have a Vortex Razor HD budget, the Burris price point got me into PRS sooner and it was better to start shooting and learning than waiting.
That was the biggest lesson for me, just get out and shoot whatever you can afford and learn how it works! Hone your fundamentals and when you can get better equipment, it will pay off all the more.
You'd pay 1000$ for a scope with glass that's nothing to write home about? Must be nice to have more dollars than sense.
excellent honest review
I have the Steiner T5xi in 5-25x56 and 3-15x50 and the glass in those leaves a lot to be desired as well..... Gotta say though... i absolutely LOVE my discontinued Burris 1.5-8x CQ-Mil scopes. Love their dual focal plan mil hash reticle with .25MOA center floating dot. Makes nailing targets out to 850 yards pretty simple.
Great explanation somehow my daughter understands your videos so much more than my explanation lol keep up the great work Xring
I literally did the same thing with my XTR2-first look it was milky-also going from my ATACR 4-16x42 and Razor G2. Mine tracks really well-only weakness is glass IMO but it is still very usable. I read that this was the case prior to purchase but paid well under $1k new and couldn't pass up.
My NEW 2024 model, XTR 2 Burris Scope has, very NICE Clarity, even on 20 to 24 powers ( Just Bought it from, Scheel's for $599.00 ). I had heard that, there were some Glass Clarity Issues and, I think that, Burris FIXED, the Later scopes with, Japanese Glass,.. but, Philipines,.. Ground / polished. Love THIS Scope !
I'll stick to swfa witch track perfect for $300 buy the way thanks for being honest on your review👍
Same here!!
For that price I think I would go with a Tract Toric for around $1100. Clear glass and spot on tracking 👊😎🇺🇸
Great review
Great information and well presented. I just bought my XTR II 4-20X for $889. For its value and price, I wonder its fair to judge the lens quality of Burris against that of a Nightforce or a Razor II ..both of which are the next class of optics and twice the price.
I have all 3 scopes you mentioned and I would not compare the Burris to the other 2. It's got great features for the price which you could compare those but glass wise absolutely not.
Got mine for 513 at optics planet it is not a nightforce but it is good enough love it
I ordered my Burris Xtreme 2, can't wait! Now if only I had some ammo....
I got one of these scopes with the H59 reticle. It's ok. Not the best glass but the reticle makes up for its pain in the butt turrets.
I would like to see you do a review on the IOR Voldota scopes and a comparison against your other high end scopes
I'd actually love to see a tall target test. Maybe the windage adjustment is what threw it all off and it tracks just fine up and down. Idk.
As I mentioned before I am a new subscriber. Just wanted to say that your video was very informative. Your style was great especially for someone looking to get into long range shooting. Not sure about your background but I look forward to looking at your past videos and upcoming ones. I saw this scope in my local shop and was wondering how far Burris has come and whether this is a quality scope on par with vortex? Thanks again.
Hello EA. My apologies for the late reply. Dealing with TH-cam strikes at the moment as they are hitting all of the gun channels really hard now. With regards to your question. The Burris XTRII is no where near the same quality as the XTR III or XTR Pro. Vortex makes very good scopes as well. You will be fine with either but just make sure the scope you purchase checks all of the boxes on what you are looking for in a scope. Thanks
Some people may turn their nose to a Burris, Personally I loved their scopes since I was a kid. 30+ years ago, they were the go to.
Dido, solid, made here in USA!
Roger Goodwin xtr2 is made in Philippines
They are still very good scopes though.
I just bought one in 4-20X50 brand new off an auction site for $458 delivered. Could not pass that up. This is my second one. Glass reminds me of my vortex viper pst scopes. Nice but. Not like my Razors. I like the turrets on my Burris better than the vipers. Mostly because there is more elevation.
Good to know, thanks X
My same experience but a thousand no way , Burris quality is still the same , I would have thought the quality would have improved
Nightforce rings on a Burris scope dude? Pure sacrilege ! There's a reason Burris and vortex have such a good warranty, it's because you're gonna need it!
I have an MTac 1-4x with the AR reticle and the glass is beautiful.... holds zero perfectly.... and is relatively light for what it is .... BUT the reticle is sooooo small and thin I have a tough time with my old eyes
Like you said, it's not a Nightforce and it doesn't cost as much as a Nightforce.
Fire arm cleared. Pointed safe direction. Clean scope glass right out of box.
Very nice video
What's your thoughts on a scope for a M1A that has a over the receiver scope mount? I'm running the Springfield gen 4 scope mount bracket. My goal with this setup is to reach out 700 yards. I know the M1A socom 16 is not a long-range rifle. The other rifle I'm looking into for longer distances is. Rem 700 sps tactical. What scope do you recommend for that rifle to punch out over 600 yards? I have a bushnell banner 2 4x12x40 on my M1A socom 16 now, and on my 22LR rifle. Witch is not bad. I know I'm going to have to upgrade as I learn and punch out over 400 yards
Great Video; now I just need to get the tool set...So where should I look?
Nice description video. One question what kind of rifle you have. If you can please let me know the made and make please
Would these results be different if you have verified level on your scope base and reticle? I was taught to have the spirit level completely flat when holding the reticle on a plumb line, and to place a level against the target when stapling it to the backboard. Did you take any of these steps before filming? I was interested in one of these scopes and now I'm not so sure with the glass quality you mentioned as well as tracking errors.
I am shocked he showed the mounting of a scope on an informational video like this. I mean at the very least, put it on a nice flat table somewhere and just put a level on the top of the top turret. This was pretty shocking to see and yes, never mount a scope like this if you actually want to use the hold overs. If you plan on shooting anything at distance, scope should be properly mounted.
FYI, you can get this scope for $599-$720 on natchezss.com. it's a blemished model. Price will be $599 for the 4-20 and $719 for the 5-25 XTRII models. I would never pay full price for it, but for $599 this is a hell of an optic and better than the PST which is slightly more expensive.
If you have the time, can you do a scope mounting video using specifically a Vortex Razor HD Gen II, the Vortex Precision rings, and a Savage 110 Elite Precision? To be honest, this is the first scope I have ever bought. I am afraid that I might break something.
XTR III apparently increases the clarity quite a bit. Hard to find reviews on it though.
Hard to find reviews on a $1200 product they aren't giving away for free?? I am shocked, shocked at this revelation.
@@almostontimehero5415 I can go and find a ton of reviews/opinions on other scopes in the same price range that aren't given out for free so I don't really see your point. Anyway, I will let you get back to your stop the steal chants and screaming at the TV.
Have u ever looked through an arken Ep5? Jus wondering as I’d like an opinion on jus glass vs glass not overview comparison I have the Ep5 but i do t think it has quite clear enough glass for spotting when shooting a 22lr which is what I bought the arken for ima give it a full running but initial impression is it’s no better than other scopes at the same price but for jus a tad more I could get an athlon ares btr or Midas tac and I think that’s what im gonna do if I sell the arken
Pretty substandard review method, honestly. You can't test a scope's tracking accuracy by firing rounds at a target, let alone when you never even leveled the reticle properly. The amount of variables introduced here is substantial.
Where can you find the 3rd ammo holder on side of rifle. And what’s it called. I can’t seem to find it. Just the ones on buttstock show up in search.
Thanks Ray! If u get a chance checkout Element scopes. I been hearing alot of good things about them.
I'm new to the scope game. Very little knowledge. What would you suggest?
Moa or mrad?
Depends on whether your more comfortable with yards or meters. Hope this helps.
Ray is a ! MOA a 1/16 ,1/8 ,3/16,or 1/4 of inch or is it set as centimeter or millimeter
Ray, this scope can now be had for the low price of $750. How would you rate it for features, quality, glass and value at that price?
Think it is a great scope for that price. Lifetime warranty with a lot of features and an easy to set zero stop. The glass isn’t bad for the price point but a little cloudy when it’s shady and above 20x.
Please keep in mind I am now sponsored by Burris.
@@vwccrline XTR2, strike eagle, arken, primary arms and athlon in that price range
Is the scope you won cloudy too ?
About the time of this video I was told that the glass is inferior to all highend
scopes. Burris is aware of that and was told by a rep. that they will be improving
the glass that comes from the Philippines. For the cost they cannot afford to be behind
Vortex, NightForce and Tract that use german or japanese HD glass
I was worried about your review as I just ordered an xtr ii. Then you said it was worth 1200 and better than pst. I just paid 550 new. So I think I feel a lot better.
How are you liking it?
I would have been very impressed if it did better than it had. not to come of as a glass snob, but there are better scopes. Cheers brother! Miss ya man !
There definitely are. There are also scopes with better glass that don’t track worth a darn and are useless as an aiming device.
Money into tracking first then glass. I think the swfa 5-20 does the best job of both under 1500 but these usually do pretty good. Though this was worse than most tracking tests I’ve seen of the xtr2. Usually have a very good record for tracking. Granted we don’t see his target or know how accurate that rifle is
Great video! Where's the primary arms review?
I will try knock it out this week.
Can you share brand and model of the stock?
Turn all the way left then right counting then divided in half same on up and down . 25yrd should be on the money or it has been for me several times. Doing this centers the scope from there adjust for zero.
New subscriber. Just wondering if you have done a video on your tool kit especially the gear in the tan case in this video. Thanks.
Hello and thanks for watching and subscribing. They are Borka Kits . I have them occasionally on my website. Otherwise, you can order them through shooterstools.com
I didn't see you leveling the scope 😬😏
Stay firsty my friends ... 😁🇺🇸🦅👍
You mention that you teach classes in the video. Can you provide some details?
So in your opinion what would be the best scope for the money? I am in the market for a new rifle and scope but not sure what to get. I don't want to spend over $600 dollars on a scope, is it even possible to get a good quality high magnification scope for that price?
Look at Vortex , Primary Arms and maybe even Arken. $600 can get you a scope that will fit the bill
@@XRING Thanks!
would you recommend spuhr rings over say mdt elite? Are they really $200 better?
Vortex/ Seekins is the way to go for good rings
How can a $1000 burris scope not track perfect? I would be dissapointed, it would go back... 1/2 moa in 5 inches is un acceptable. I would be ok with 1/4 moa in 10 inches...
Why would Burris be giving stuff away at a bushnell match? Does bushnell own burris? I obviously understand the advantages of FFP but what is the advantage of using SFP? Like the Accupoint and a lot of the Trijicon products are SFP...
Burris xtrii is five years old your late have my xtrii three years love
This is on sale for under $600. Is that a deal or is this antiquated?
$600 is a great Deal for this "much" ( a veryTOUGH Scope with, many good, Feature's ) and I, too bought one from, Scheel's, in Missoula Mt. @ $599 Plus,.. Free Shipping.
Yes, not quite as clear as some Burris's, on the Higher Powers But, it's NOT a $1,200+ Dollar Scope,.. XTR III, either. You WON'T be missing, because of, .. "Clarity"
what brand rifle？is nice
X-Ring...once and for all. I want to drive tacks at 1000 yds and maybe ocassionally a deer. FFP or SFP? Tracts are nice but all SFP. Thanks.
I think it's unfair to compare the Gen 2 PST to this, I believe the Vortex is better by far.
Also, what camo pattern is on the stock?
Thanks for the videos!
I've been seeing those for sale for 600$ lately
There's a good reason for that.
How high are those rings
What make and model is your rifle stock?
Manners T2a Gap Elite
Thanks for the video, well.done. now go get a vortex 😂😂
Exactly. both my PST and HST Scopes track damn near perfect. I have a NF that cost double the vortex and outside of a slight edge In Clarity the vipers shoot with it all day long. Almost picked up one of these XTR’s. Glad I didn’t now.
Can you post a link too that torque tool you are using please
Www.shooterstools.com make sure you tell him you saw it on xring.
@@XRING thank you great videos by the way there always very professional and informative
Can I use that on my ruger 300 win mag
Shouldn’t be a problem
I have the XTR2 on my 6.5 for and I too, am not totally impressed with the glass
I've had two different 4-20 versions and both had some pretty bad chromatic abberation. Currently running a Vortex PST Gen 2 on my 6.5 CM and it's much better glass.
Anyone want to buy this same scope? 500-600? With box and manual with bubble level already installed
After sending in a Burris XTR for warranty work, I will never own another Burris scope.
I'm glad I learned that lesson on a 250$ fullfield 2 about 15 years ago. I almost bought one of these but went nightforce instead.
Why don't you do a review on a Schmidt and Bender Looks like only thing that's good is high dollar to you
I actually sold all of them. I used to be a huge Schmidt and Bender fan until their quality went out the window. I call it like I see it Jason.
When you’re used to high end glass you will be disappointed with lower price stuff. That’s a fact.
I also own an XTR2 and I think the glass sucks, but I’m always shooting with my Kahles k525i and my Minox ZP5.
Who built the rifle??
Arrow Dynamics
If this ain’t a 1/4” gun ray I don’t know what one is lol..I’m slobberin out the mouth..
Dang I thought my Crossfire was nice 😂😂😂
Improve the crossfire ii's
Would be better if we could see the target/paper as you were shooting it
Uses philippine glass 🤣 what they don't know is that glass made here in the ph (lapu² cebu) actually uses japanese technology as the company who manufactures those glasses are japanese owned.
I am a bit disappointed that you would do box test and give an opinion on the scopes tracking ability without properly mounting and leveling the scope first. Very disappointed.
I agree. That’s a really old video from when I first started the channel. Everything is done by laser and backlighting the reticle now. That was done in March 2020 so 3 years ago and the channel is only four years old. I was complacent.
@@XRINGI appreciate your honesty here.
Well, you just convinced me not to buy one!
Thats why I give honest opinions.
I have this and the PST and I disagree. The Burris kind of sucks, glass is bad. $1100 athlon or Primary Arms so much better