Great video my friend I have the same ruger Wrangler and mine got a lot better after putting more rounds you will see the difference, take care and stay safe.
For 200 dollars, the Ruger Wrangler is a fine little gun. I have shot hundreds of rounds without any issues. As for accuracy it is a 22, try different ammunition. Comparing it to a Ruger Blackhawk or Single Six (which I also own) is kinda unfair. Pretty sure the Wrangler came out in response to the popularity of the Heritage Rough Rider. You get what you pay for. Great video, thank you..
Hey thanks for checking it out. I'm usually an auto loader guy, but since I keep hearing good things about the Single Six and Blackhawk I'll have to check them out.
Its better then the mk1 fist! I carried mine for a year before I got a Sccy 9mm for 180$. Nobody wants to get shot and when the see a gun, its not like there're going to think "its only a 22! That won't stop me" ... and just like anything else, its all about training with it to become as effective as it can be! Stay Armed! Stay Safe! Stay Ready!
I have a Wrangler. Mine shot fine - easy to roll a can at 25 yards consistently. I did find that with the two loads that I tried, it did shoot a bit low and left. But I'm right handed and if I'm going to err, it's going to be pushing the impact a little left... and the other thing is that I was shooting in a covered range and my old eyes had trouble picking up the front sight. But even in adverse conditions, it did what I expected this revolver to do.
yes its accurate. i shoot muscle shells on the other side of the river. one day ill go look at all the chips from them. but point is. yes its accurate. i did modify my front sight to point of aim.
@@christian3309 honestly. mine shot bout a foot low and bout 6" left at 50 yards with front tip level with back tops. so after several hundred rounds to verify the shot point. i filed the tip a lil at a time. reshoot. after i gt my level i went a lil futher. then built up an orange epoxy tip that was thinner and easier to see and see past. to adjust the 6" left. i just shot 6 rounds. tapped it on the tree lightly to slighty nudge it. shot again. i had to adjust it 3 times to get it centerd. no. its not the right way to do it. can i shoot river muscle shells at 100+ yards reliably and consistantly. fk yes. this is my first pistol so itll be with me til judgement day.
I have a wrangler with the 4.6 inch barrel I painted the front sight orange and using different 22s I can hit fist size steel plates at 20-25 yards no problem
I have the Wrangler and several Heritage also. I like the Heritage much more, it''s way more accurate than the Wrangler and handles better also; loading gate is next to nearly impossible to open!
I'll have to try some different ammo and see if it makes a difference. If not, I suppose I can try filing down the front sight. Stay tuned, maybe I'll do that. 👍
I had a Wrangler. Only thing I liked about it was the price. Everything about it was too small for me. I traded it for a Marlin Goose Gun. Are you in the Bakken? Thanks for the vid!
So did the wad of lead that built up in the barrel basically in one spot cause wear in the opposite side making the bore of the barrel to be so uneven that the bullet wobbles as it travels down the barrel? Do you remember it being more accurate?
I don't remember it being terribly accurate before. I think it always hit low for me. The original idea was to clamp the gun in the BOG grip to take the shooter out of the equation but the barrel was too small to clamp. It wanted to slant because of the ejector rod. Maybe part of the reason why it was hitting left. But then when I shot off hand, it hit low like it always did. I don't recall the groups ever really being tight either. If you remember the water jug vid... the .22 rounds were hitting low on the jug. As far as wear in the barrel, it's a possibility I supposed with that much lead build up.
Great video my friend I have the same ruger Wrangler and mine got a lot better after putting more rounds you will see the difference, take care and stay safe.
For 200 dollars, the Ruger Wrangler is a fine little gun. I have shot hundreds of rounds without any issues. As for accuracy it is a 22, try different ammunition. Comparing it to a Ruger Blackhawk or Single Six (which I also own) is kinda unfair. Pretty sure the Wrangler came out in response to the popularity of the Heritage Rough Rider. You get what you pay for. Great video, thank you..
Hey thanks for checking it out. I'm usually an auto loader guy, but since I keep hearing good things about the Single Six and Blackhawk I'll have to check them out.
Its better then the mk1 fist! I carried mine for a year before I got a Sccy 9mm for 180$. Nobody wants to get shot and when the see a gun, its not like there're going to think "its only a 22! That won't stop me" ... and just like anything else, its all about training with it to become as effective as it can be! Stay Armed! Stay Safe! Stay Ready!
I have a Wrangler. Mine shot fine - easy to roll a can at 25 yards consistently. I did find that with the two loads that I tried, it did shoot a bit low and left. But I'm right handed and if I'm going to err, it's going to be pushing the impact a little left... and the other thing is that I was shooting in a covered range and my old eyes had trouble picking up the front sight. But even in adverse conditions, it did what I expected this revolver to do.
Certainly not a bad plinker for the price. Thanks for stopping by!
yes its accurate. i shoot muscle shells on the other side of the river. one day ill go look at all the chips from them. but point is. yes its accurate. i did modify my front sight to point of aim.
How do you modify them? Mine is fixed sights
@@christian3309 honestly. mine shot bout a foot low and bout 6" left at 50 yards with front tip level with back tops. so after several hundred rounds to verify the shot point. i filed the tip a lil at a time. reshoot. after i gt my level i went a lil futher. then built up an orange epoxy tip that was thinner and easier to see and see past. to adjust the 6" left. i just shot 6 rounds. tapped it on the tree lightly to slighty nudge it. shot again. i had to adjust it 3 times to get it centerd. no. its not the right way to do it. can i shoot river muscle shells at 100+ yards reliably and consistantly. fk yes. this is my first pistol so itll be with me til judgement day.
Fun revolver, mine keyholes when dirty.
I have a wrangler with the 4.6 inch barrel I painted the front sight orange and using different 22s I can hit fist size steel plates at 20-25 yards no problem
Not bad at all 😃👍
I have the Wrangler and several Heritage also. I like the Heritage much more, it''s way more accurate than the Wrangler and handles better also; loading gate is next to nearly impossible to open!
Thanks for the feedback. I'll have to check out the Heritage. Maybe I'll do a Wranger vs Heritage vid. (not that it's never been done before) ha.
@@northdakotaplinking9794 Do It!!! 😃
I would like to see you try it with different ammo, do Minimags make it shoot higher?
I'll have to try some different ammo and see if it makes a difference. If not, I suppose I can try filing down the front sight. Stay tuned, maybe I'll do that. 👍
I had a Wrangler. Only thing I liked about it was the price. Everything about it was too small for me. I traded it for a Marlin Goose Gun. Are you in the Bakken? Thanks for the vid!
Thanks for watching 😊 I'm in the opposite side of the state from the Bakken.
Bet you were using Winchester ammo with that lead
I think mostly Thunderbolts or CCI. Don't think I've used any Winchester, but lead is lead. ha
So did the wad of lead that built up in the barrel basically in one spot cause wear in the opposite side making the bore of the barrel to be so uneven that the bullet wobbles as it travels down the barrel? Do you remember it being more accurate?
I don't remember it being terribly accurate before. I think it always hit low for me. The original idea was to clamp the gun in the BOG grip to take the shooter out of the equation but the barrel was too small to clamp. It wanted to slant because of the ejector rod. Maybe part of the reason why it was hitting left. But then when I shot off hand, it hit low like it always did. I don't recall the groups ever really being tight either. If you remember the water jug vid... the .22 rounds were hitting low on the jug. As far as wear in the barrel, it's a possibility I supposed with that much lead build up.
I found out after the fact that build up where you put the rounds in is common to this model too.
Looks like the answer is no.
You're definitely going to find more accurate guns out there... but still not too bad for a $200 plinker.
Fun,gun,dommie