2005 - 2009 Lincoln Zephyr / MKZ Radio, Amp, Sub, Camera Install

แชร์
ฝัง
  • เผยแพร่เมื่อ 14 ธ.ค. 2024

ความคิดเห็น • 127

  • @ProvoBeastAudio
    @ProvoBeastAudio  3 ปีที่แล้ว +2

    Parts used linked in the description of the video!

  • @hawikau1654
    @hawikau1654 ปีที่แล้ว

    I just completed my 2-din install on a non-nav radio unit, was very easy after watching your video. I had to remove about 1/4 inch from the sides and top of the bezel for the install kit to fit correctly. What I did different was, not mounting the bezel to the head unit, I left it separate for easy installation as a separate unit. Since all the bezels were removed for this, I removed the push buttons and controls for the AC and cleaned each component. I didn't like the silver color of the bezels so, I looked locally for a matching wood wrap and settled on a black leather wrap instead. I did have issues in the areas above the vents but, it works for me.

  • @joeydarnell8464
    @joeydarnell8464 4 ปีที่แล้ว +4

    What a huge help. Thanks a lot for these videos. Its nice to see what im getting my self into before doing all of it.

  • @Staticaddict706
    @Staticaddict706 8 ปีที่แล้ว +2

    I have an 09 MKZ and this video is exactly what I needed. I'll be putting 2 kicker 15s and a 1200watt kicker amp in soon. Thanks for the upload!

    • @PRIMOTHADEITY
      @PRIMOTHADEITY 3 ปีที่แล้ว

      I know it's a long shot asking you but I just but my 2007 mkz and I'm wondering if the stock radio has rca hookups for an amp or not

    • @yunga8305
      @yunga8305 3 ปีที่แล้ว

      Still have it ?

  • @brianross1094
    @brianross1094 8 ปีที่แล้ว +7

    so im guessing you never found a kit that works ive looked everywhere

  • @rollin9692
    @rollin9692 ปีที่แล้ว +1

    Do you have a link for the double din installation kit you got? I know it's been 7 years but I definitely do not want to do a pop out. 🤣 I bought a Kenwood DMX709S, if I have to 3D print something for the airgap I will

  • @jeremyboven
    @jeremyboven 4 ปีที่แล้ว +1

    Where is part 2 of the new dash kit when it arrived ?

  • @ozzie2867
    @ozzie2867 6 ปีที่แล้ว +4

    So what was the correct stereo trim. Because I know the metra 95-5812 doesn't fit.

    • @letsgonow5641
      @letsgonow5641 6 ปีที่แล้ว +1

      Did you ever figure out..Ive been using the fact radio w a mild system..I dont want to go w a single din..

  • @hiddenacettv4166
    @hiddenacettv4166 7 หลายเดือนก่อน

    So my car has the cross bar , all I do is cut it flush and continue with the same steps u did in this video?

  • @rickjohnson4892
    @rickjohnson4892 5 ปีที่แล้ว

    I wish you were in Fort wayne, Indiana. I have an 08mkz and could really use that entire package you've installed.

  • @michaelholm2534
    @michaelholm2534 5 ปีที่แล้ว +1

    Here in Texas it is illegal too have license plate covers or any thing blocking the name Texas on your license plate so the stereo I ordered has a camera that just go's under the bumper and doesn't block any thing

  • @alonsougalde1379
    @alonsougalde1379 2 ปีที่แล้ว +1

    By the way it was a great video well explained thanks 👍

  • @bryanhenry7706
    @bryanhenry7706 3 ปีที่แล้ว

    hey I have a 06 zephyr I would like to strip out the factory amp,radio and speakers and put in aftermarket everything is that possible if so please tell me how thank you kindly

  • @ryanstamps2267
    @ryanstamps2267 8 ปีที่แล้ว +1

    How can i replace my radio with a double din if i have the Navigation system?

  • @kellysego8243
    @kellysego8243 ปีที่แล้ว

    Looking to do this on an 07, I would like to do the the head unit along with backup camera, and steering wheel controls, it seems like they don't make this unit anymore. Would like to have the built in Sirius ready and android auto. How do I get a hold of you. I font see a phone or email.

  • @zae6934
    @zae6934 9 หลายเดือนก่อน

    Did you run the cords through the firewall to hook up subs.. I have the same exact car need help.

  • @EduardoSilva-cf9oo
    @EduardoSilva-cf9oo ปีที่แล้ว

    good friend, what color is the cable that stands out from the original amplifier of lincon mkz 2007

  • @hiramfizzard
    @hiramfizzard 5 ปีที่แล้ว +1

    Will that harness work for a 2006 zephyr with thx system?

  • @arthurnewkirk4494
    @arthurnewkirk4494 2 ปีที่แล้ว

    I have a Lincoln mkx 2013 would like to know if you have any video on bypassing factory amplifier for that model because my amp went bad and only plays when I hit bumps.please help thank you.

  • @Cruelmindz1
    @Cruelmindz1 4 ปีที่แล้ว

    It says that the part 70-5521 radio wiring harness does not fit that vehicle. Humm?

  • @juanfranciscolares5524
    @juanfranciscolares5524 2 ปีที่แล้ว

    Tienes a la venta esa base para adaptar un estero de pantalla

  • @brianross1094
    @brianross1094 8 ปีที่แล้ว +1

    dod that metra dash kit take up the gap right or were there any spaces my current kit left a gap at bottom

    • @ProvoBeastAudio
      @ProvoBeastAudio  8 ปีที่แล้ว

      There was a gab, so we had to fill it. See 5:40

  • @karleedykes3178
    @karleedykes3178 7 ปีที่แล้ว +1

    Hey I'm installing a Boss stereo navigation in my Lincoln Zephyr. Can't find your link for wiring? Where do I purchase the correct harness to plug into the factory harness? Thanks for your help!

    • @ProvoBeastAudio
      @ProvoBeastAudio  7 ปีที่แล้ว

      www.sonicelectronix.com/item_12664_Metra-70-5521.html here you go! Use coupon code ProvoBeast for 5% off checkout

  • @steventmln1st
    @steventmln1st 2 ปีที่แล้ว

    Is the steering wheel volume wire separate.?

  • @shawtietaylor7183
    @shawtietaylor7183 5 ปีที่แล้ว

    What about the navigation speakers did u hook them up to the new radio or will they work to a replacement if the radio has navigation

  • @lifewithlb2013
    @lifewithlb2013 4 ปีที่แล้ว

    Am I able to take the base radio out and install the factory navigation?

  • @johnnyjackson2266
    @johnnyjackson2266 3 ปีที่แล้ว

    What type of deck did u guys put in

  • @michaelholm2534
    @michaelholm2534 5 ปีที่แล้ว

    on my Zephyr I put in the same kind of radio but I didn't need a stereo kit I cut out the hole perfectly and manged too install it without a kit and it looks factory no gaps or any thing like this guy's but I didn't install the ugly backup camera that did come with my radio cause of Texas State Laws on that you can't cover anything up on your License plates so I have too order a flush mount camera for my bumper

  • @alonsougalde1379
    @alonsougalde1379 2 ปีที่แล้ว

    Question bro i have a Lincoln MKX 07 can i connect an aftermarket stereo and a aftermarket amp and sub and still leave the factory amp and sub working or they have to be cancelled and bypass?

    • @EnglightenMyopinion
      @EnglightenMyopinion 11 หลายเดือนก่อน

      where are you gettiung all this power? I wouldnt advise even trying too, the SJB is very reactive to changes and could cause a lot bigger issues. Buy better speakers would be the easiest way to make things louder..

  • @rileytimulty8673
    @rileytimulty8673 4 ปีที่แล้ว

    Where did you put the ground to for the amp

  • @kwest5171
    @kwest5171 8 ปีที่แล้ว

    My husband attempted to install the same stereo model into my 2006 Zephyr. I have the THX with nav stereo system and when he installed, he got no sound. I saw in the comments that you recommended trying the PAC RP4-FD11 Wiring harness. Does this also include the antenna adapter?

  • @Firefox247
    @Firefox247 6 ปีที่แล้ว

    Was the backup camera too low since the license plate is pretty low on the MKZ? I'd like to do a license plate install since they are easier, but I'm worried it will be too low to the ground to be useful.

    • @ProvoBeastAudio
      @ProvoBeastAudio  6 ปีที่แล้ว

      Its adjustable, so you can dial in how low or high the camera points.

  • @shawtietaylor7183
    @shawtietaylor7183 5 ปีที่แล้ว

    How do you get the navigation to still work

  • @nicklavore9841
    @nicklavore9841 7 ปีที่แล้ว

    I went to best buy to purchase the wiring harness for my 2007 lincoln mkz and they told me that the metra 70-5521 will not work for my car. I was told i need metra XSVI-5521-NAV. My car is a base model without thx sound and now I'm at a standstill with hooking the stereo up because I don't want to get everything taken apart to find out the harness doesnt work. Do you know anything about this?

    • @ProvoBeastAudio
      @ProvoBeastAudio  7 ปีที่แล้ว +2

      This version in the video was the basic model and the Metra70-5521 worked just fine. Sometimes those at best buy aren't the brightest bunch.

  • @recipeswithfi
    @recipeswithfi 8 ปีที่แล้ว

    what brand of mounting bracket did you use? I have a 2008 MKZ and can not find a kit for a double after market radio

    • @ProvoBeastAudio
      @ProvoBeastAudio  8 ปีที่แล้ว +1

      Depends on if you had the factory nav before or not. If you radio is similar to the video, no bracket will fit, hence why we used the factory bracket. and used a blank to fill the gap.

  • @philipknee6675
    @philipknee6675 4 ปีที่แล้ว

    I have an 07 MKZ with THX / Nav. The 3 wiring harness' that i took off the factory radio, I know i use the main one bit what else? Cause i have lights and touch screen works just no sound.

    • @ovinsnipes218
      @ovinsnipes218 3 ปีที่แล้ว

      @Brooklyn Abbie have u found anything?

  • @nicklavore9841
    @nicklavore9841 7 ปีที่แล้ว

    I have yet another question. I have an older head unit without an aux plugin. it does have a USB terminal on the back tho. if I hook up an aux cord to this will it work? or what about a USB to aux adapter?

    • @ProvoBeastAudio
      @ProvoBeastAudio  7 ปีที่แล้ว +1

      Every stereo is different, that would be a question to research through the manufacture. I wouldn't be able to confirm that.

  • @MrVieyra14
    @MrVieyra14 6 ปีที่แล้ว

    I have a 2008 MKZ with navigation but w/o THX. The rear deck has the factory cut out for 3 speakers. Is this for two 6x9 and one 4"?

    • @ch3ncerpau148
      @ch3ncerpau148 3 ปีที่แล้ว

      Correct. If you had the THX sound system, they would be occupied with speakers that are connected to the THX amp

  • @memeverde6522
    @memeverde6522 7 ปีที่แล้ว

    I have a question. Well here it goes I was tryna to jump start my 2007 Lincoln MKZ and accidentally put the jumper cables on wrong. My stereo won't work now. I changed the fuse but it's still not working. What should I do?

    • @ProvoBeastAudio
      @ProvoBeastAudio  7 ปีที่แล้ว +1

      Check to ensure the radio is getting both a constant power (yellow) wire and switched power from the ignition (red wire). If it is, check the fuse on the radio itself. If it is good, the radio has gone bad. Go from there.

  • @dromehernandez1970
    @dromehernandez1970 2 ปีที่แล้ว

    Thanks man! Used this video to put in a double din radio. Unfortunately I got the wrong bracket as well and have a gap. It's okay tho lol .

  • @PRIMOTHADEITY
    @PRIMOTHADEITY 3 ปีที่แล้ว

    Okay but do I need to have an aftermarket stereo to wire in an amp and subs or does the stock radio have hookups for an amp

    • @ProvoBeastAudio
      @ProvoBeastAudio  3 ปีที่แล้ว +1

      99% of factory radio's on the market will not have a RCA preouts, so you will need a line out converter.

    • @ProvoBeastAudio
      @ProvoBeastAudio  3 ปีที่แล้ว

      amzn.to/2T8oZqz

    • @PRIMOTHADEITY
      @PRIMOTHADEITY 3 ปีที่แล้ว

      @@ProvoBeastAudio do I just splice all the wires into the factory wiring or is it plug and play?

    • @ProvoBeastAudio
      @ProvoBeastAudio  3 ปีที่แล้ว +1

      @@PRIMOTHADEITY Unless you get a T harness, no, it won't be plug and play. You will need to splice into the speaker output behind the radio to install the line out converter.

    • @PRIMOTHADEITY
      @PRIMOTHADEITY 3 ปีที่แล้ว

      @@ProvoBeastAudio sounds easy enough I'll see how it goes I'm gonna order it next week sometime and try not to mess up my car lol

  • @kspec3389
    @kspec3389 ปีที่แล้ว

    What exact fit speaker will go in all four doors?

    • @EnglightenMyopinion
      @EnglightenMyopinion 11 หลายเดือนก่อน

      6x8 all around and 6.5 round in the center of the rear deck if you have the THX audio

  • @nicklavore9841
    @nicklavore9841 8 ปีที่แล้ว

    is that wiring harness for models with or without thx audio?

    • @ProvoBeastAudio
      @ProvoBeastAudio  8 ปีที่แล้ว +2

      This vehicle did not have the THX sound system. If you have the factory amp, this kit keeps the factory amp working and steering wheel controls: PAC RP4-FD11 Wiring Interface. I have also heard that the Metra 70-5520 will still work, even on amplified vehicles, but i can't verify.

  • @neilmotilal3099
    @neilmotilal3099 8 ปีที่แล้ว

    Hi, I have a lincoln mkx 07 with THX 14 speaker system. Is it worth changing the head unit for sound quality? and so i can tune by subs? I'm replacng with a SONY xav 64bt. Thanks!

    • @ProvoBeastAudio
      @ProvoBeastAudio  8 ปีที่แล้ว +1

      It is up to you, you may get a better sound quality by replacing the radio with more EQ options. If you don't replace the radio, you can still ad an audio processor for more EQ options as well.

    • @neilmotilal3099
      @neilmotilal3099 8 ปีที่แล้ว

      Thanks but those costs alot more right? Can you recommend a less expensive processor?

    • @ProvoBeastAudio
      @ProvoBeastAudio  8 ปีที่แล้ว

      No, you really get what you pay for. All depends on the processor and yes, you can most likely find a radio for cheaper.

  • @djwilliams624
    @djwilliams624 8 ปีที่แล้ว

    I have a 2006 Lincoln zephyr I have the correct wiring harness I hooked everything up but have no sound it has a THX system so I bought the adapter that has two and there's still no sound idk if I'm hooking something up wrong please help

    • @ProvoBeastAudio
      @ProvoBeastAudio  8 ปีที่แล้ว +1

      The smaller adapter includes a blue/white wire. This will need to be wired to your new radio to trigger your factory THX amp to turn on . In addition, you may actually need the PAC RP4-FD11 Wiring harness. www.amazon.com/PACRP4FD11-All---One-Replacement-Interface/dp/B007STCFPO/ref=sr_1_1?ie=UTF8&qid=1471984850&sr=8-1&keywords=PAC+RP4-FD11+Wiring+Interface

    • @djwilliams624
      @djwilliams624 8 ปีที่แล้ว

      Thank you I will check it out

    • @kwest5171
      @kwest5171 8 ปีที่แล้ว

      Were you able to install with the PAC wiring harness? I'm having the same sound issue.

    • @djwilliams624
      @djwilliams624 8 ปีที่แล้ว

      I had to bypass the factory amp

  • @chessmaster1569
    @chessmaster1569 3 ปีที่แล้ว

    Will this work on a CarPlay radio?

  • @michaelholm2534
    @michaelholm2534 5 ปีที่แล้ว

    I have the same car I'm having too get the right dash kit from ebay new I have my new stereo ordered but still need too order a dash kit my zephy doesn't have the removable center bar so I might just trim it up not cut it off I might not have too need a dash kit just maybe I get lucky and factory delete the cd changer hole with bondo and some primer and plastic silver paint

  • @EduardoSilva-cf9oo
    @EduardoSilva-cf9oo ปีที่แล้ว

    Do you have a diagram that you can help me with if you don't mind, thanks.

    • @ProvoBeastAudio
      @ProvoBeastAudio  ปีที่แล้ว

      I don't, and considering this video was from years ago, not sure what you are needing. Feel free to contact us on our facebook page.

  • @19732899
    @19732899 5 ปีที่แล้ว

    What size is the Deck

  • @eddiegutierrez2871
    @eddiegutierrez2871 8 ปีที่แล้ว

    I have an 08 mkz currently I have a 500/1 v2 pushing a 12 inch fosgate T0 with factory radio I need to upgrade my stereo how much would labor cost to do a double din install? factory radio sucks!!! thanks

    • @ProvoBeastAudio
      @ProvoBeastAudio  8 ปีที่แล้ว

      Depends who you have do it. Call around for prices.

  • @jplunkett3647
    @jplunkett3647 8 ปีที่แล้ว

    Great high Level Video ... Ordered all your recommended Parts Listed ....started my Install today for my Mothers Lincoln 2008 MKZ ... Quick QUESTION: TWO cables connected to Factory Radio ..Metra 70-5521 OK to larger of Two however still have a 16 Pin connector ( Can you advise what Adapter Cable to Order ... happy to order from you or any of your recommended Vendors ) ... Many thanks in advance

    • @ProvoBeastAudio
      @ProvoBeastAudio  8 ปีที่แล้ว

      It depends, do you have a factory amp and / or SYNC system? Also it may need a different adapter depending on your application. Crutchfield.com is an excellent resource to ensure you have all the correct installation parts needed.

    • @jplunkett3647
      @jplunkett3647 8 ปีที่แล้ว

      NO factory Amp or Navigation .... however does have a Factory Tag ( SYNC by Microsoft ) front portion of Cup holder assembly .... Once the NEW Pioneer AVH-X2800BS that you recommended per TH-cam will Use External microphone for hands free Mobile Phone Use .... I hope the Factory Steering Wheel Volume etc buttons will function with New Pioneer ....at present day 2 Installing in my Mothers Vehicle also NEW wired Backup Camera per your list of parts .... once I had her watch this Video she was sold .... Please continue posting informative videos they are Most appreciated ... Respectfully

    • @ProvoBeastAudio
      @ProvoBeastAudio  8 ปีที่แล้ว

      Being that you have the SYNC system, you may need the PAC MS-FRD1 interface or the PAC RP4-FD11 Interface to retain the SYNC system. The vehicle in the video did not have SYNC, so the harness would be a little different. Hope this helps!

    • @jplunkett3647
      @jplunkett3647 8 ปีที่แล้ว

      You are the Man :o) .... many thanks for your prompt reply / support / guidance its most appreciated and valued ..... If I may for any future viewers suggest wiring dedicated Ground from back-up Camera to Head unit Ground ... I had an issue NO Back-up Camera Video so for testing purposes temporary cable from Camera Ground to Head Unit Ground Video Issue resolved ... decided to wire dedicated Ground camera to head Unit

  • @sarahkearney5529
    @sarahkearney5529 3 ปีที่แล้ว

    Does anyone know if a 2008 MKZ (with navigation) receiver will work in a 2007 MKZ with no stock navigation?

    • @ch3ncerpau148
      @ch3ncerpau148 3 ปีที่แล้ว

      If it's the stock radio you're trying to put in the 2007 from the 2008, then it will most likely not fit. This is because the wiring for the NAV model is different than the non-NAV model. And even if you were able to find a harness to connect the two, the NAV radio would require components that the non-NAV vehicle itself does not have. However, if you want to put an aftermarket NAV receiver (head unit, radio, etc.) in the 2007, you would simply need a harness to connect to the stock radio connector and you're all good to go. I would recommend the BHA5800 from PAC Audio if you want to go that route, and the SWI-CP2 if you have steering wheel controls and want to keep them.
      Hopefully this answered your question and good luck with your projects!

  • @Garland777twin
    @Garland777twin 7 ปีที่แล้ว

    what happen to your control for your seat warmers?

    • @ProvoBeastAudio
      @ProvoBeastAudio  7 ปีที่แล้ว

      The customer didn't have seat warmers.

    • @ch3ncerpau148
      @ch3ncerpau148 3 ปีที่แล้ว

      And even if they did have seat warmers, the radio install would not affect their functionality

  • @hangx26hog86
    @hangx26hog86 5 ปีที่แล้ว

    I have a 2009 Lincoln mks with THX Sound system i want to run a 4 channel amp how can i do it

    • @ProvoBeastAudio
      @ProvoBeastAudio  5 ปีที่แล้ว +1

      Find the factory amplifier, remove it, and fuse that factory wiring output to the speakers to connect your 4 channel amp. Or, if that is too complicated, install your new amp and just run new speaker wire to each speaker.

  • @evanmclain1275
    @evanmclain1275 8 ปีที่แล้ว

    What is the aux/usb adapter website?

    • @ProvoBeastAudio
      @ProvoBeastAudio  8 ปีที่แล้ว

      Just search amazon for the Aux / USB flush mount adapter and you can order it there.

  • @mikeowens1923
    @mikeowens1923 2 ปีที่แล้ว

    Still have

  • @nicklavore9841
    @nicklavore9841 7 ปีที่แล้ว

    also crutch field says the 70-5521 doesn't fit my car and I need the 70-5520...wtf

    • @ProvoBeastAudio
      @ProvoBeastAudio  7 ปีที่แล้ว

      They are both the same, but the 70-5521 comes with the amplifier harness which in your case wouldn't be used anyways.

  • @Brownienterprises
    @Brownienterprises 6 ปีที่แล้ว

    Which incorrect kit came with that order from sonic electronix? Can you provide a model number or something for the wrong kit, to make sure they didnt send me the wrong one as well please. I see this video was posted a couple years ago hopefully they have the correct kits not for the 07-09 MKZ. Even if they havent by now can you still provide the info to the incorrect kit please?

  • @dreakgamesttv
    @dreakgamesttv 4 ปีที่แล้ว

    Thanks

  • @dannettevigil
    @dannettevigil 7 ปีที่แล้ว

    My son tried installing the same exact stereo in my 07 Lincoln mkz. It powered on but there isn't any sound. My car already has a built in amp. We purchased the Metra harness for the car. Maybe we have the wires connected wrong? When we put the factory stereo back in the speakers work. Please help!!

    • @ProvoBeastAudio
      @ProvoBeastAudio  7 ปีที่แล้ว

      Your factory amplifier is not turning on correctly. What harness adapter are you using? The one i recommend for the THX Amplified system is the PAC C2R-FRD1 Wiring Interface.

  • @nicklavore9841
    @nicklavore9841 7 ปีที่แล้ว

    my 2007 mkz has the aux plug in center council. do you know if this will work with after market head unit

    • @ProvoBeastAudio
      @ProvoBeastAudio  7 ปีที่แล้ว

      There typically isn't a harness to retain that AUX input, you will lose that functionality. Unless you are open to manually wiring it, you can use the adapter in the video instead.

  • @misaeloliva5609
    @misaeloliva5609 6 ปีที่แล้ว

    Anybody has the wiring diagram

    • @ProvoBeastAudio
      @ProvoBeastAudio  6 ปีที่แล้ว

      www.modifiedlife.com/2006-lincoln-zephyr-car-stereo-wiring-diagram/

  • @RobertoMartinez-lr3su
    @RobertoMartinez-lr3su 8 ปีที่แล้ว

    where are you located? would love for you to do this to my 2006 zephyr

  • @PurpMan242
    @PurpMan242 3 ปีที่แล้ว

    That part wit the climate controls will not come out .

  • @bryanhenry7706
    @bryanhenry7706 3 ปีที่แล้ว

    hey I have a 06 zephyr I would like to strip out the factory amp,radio and speakers and put in aftermarket everything is that possible if so please tell me how thank you kindly

  • @joshuakerner5278
    @joshuakerner5278 7 ปีที่แล้ว

    Did the car have a factory amplifier if so what was the game or the loss when you plug a powered radio into it

    • @ProvoBeastAudio
      @ProvoBeastAudio  7 ปีที่แล้ว

      No factory amp on this model.

    • @hiramfizzard
      @hiramfizzard 6 ปีที่แล้ว

      How would one do that install with stock amps. THX.

  • @Dripgodsent
    @Dripgodsent 7 ปีที่แล้ว

    If i wanted to install a single din with a pop out screen for this car without the center bar what dash kit should i use

    • @ProvoBeastAudio
      @ProvoBeastAudio  7 ปีที่แล้ว

      head over to Sonic Electronix and use their vehicle fit guide function. It will allow you to find the exact dash kit needed to install a single din flip out screen. Use coupon code ProvoBeast for 5% off a checkout.

    • @Dripgodsent
      @Dripgodsent 7 ปีที่แล้ว

      Provo Beast Audio Installation thanks crutchfield website was saying no dash kit would fit

    • @Brownienterprises
      @Brownienterprises 6 ปีที่แล้ว

      Go to any ford oem site and look for part# 8H6Z-5404302-BA

    • @Brownienterprises
      @Brownienterprises 6 ปีที่แล้ว

      Brent Davis search part number 8H6Z-5404302-BA

  • @bryanhenry7706
    @bryanhenry7706 3 ปีที่แล้ว

    hey I have a 06 zephyr I would like to strip out the factory amp,radio and speakers and put in aftermarket everything is that possible if so please tell me how thank you kindly