@@scottcoleman7304 More efficient to do it that way, considering if you buy a combo kit from any of the major manufacturers it usually comes with both.
Two reasons to use this tool. 1. You only own one power driver/drill 2. Your working in tight spaces where 2 drills isn’t an option. It’s great until you snap the drill bit or the bit gets worn out so I carry a spare as backup. Pro tip use medium(blue) loctite on the set screws.
My drill has an easily removable chuck so i can just tighten a drill too the chuck so that the chuck and the drill is basicly one part And i can then change from the drill and to a bit by just swapping between them easily I can also just use the chuck as a screw driver or hand drill to make a pilot hole
I have to drill also. The system is very good when you work outside on a fence and is hard to have 2 drills. If you work inside is better with 2 drills. This is how I tested and worked for me.
@@WorkSmart4U I’m gonna have to agree with the other guy. Two drills or manufacturing process it. Aka get the workpiece attached then comeback and predrill everything before sinking fasteners. Or if you are doing a deck with a kreg jig bribe a buddy with beer so he will run the other drill sinking screws right behind you.
juan gonzalez I am working with 2 drills for few years and know-how is it. When you have to move from place to place on a project is hard to have 2 of them with you. You don’t find it or is hard to take the screws and the 2 drills with 2 hands. I am working alone on my hobby project. I advise you to try it on a project for more than 2 hours and let me know. The price is 10$ soo. What is the problem with this system is that you broke the drill bit for predrilling 😔. I find a better predrill bit or a shorted one I think will be a great tool. For me as a beginner I think is a great tool and wanted to have it as fast as posible. Not everyone has two drills as beginner in my country. Thanks
Yep . Belt clips and 2 drills ... i've tried few quick release systems and are simply not reliable. They either take too much time or jam after few uses ...
Craftsman made this exact tool 15-20 years ago. I have it in my garage right now. Not as useful as one might think. Especially in this day of impact drivers.
!!!! Remalo cuando haces presión para fijar el tornillo, se desgasta demasiado el hexágono q esta en la mitad de ello y se atora x q es aluminio y si genera el desgaste no hay reemplazo de la pieza y toca comprar otro, lo digo x experiencia...👍 👍👍 Saludos desde MANIZALES COLOMBIA👍🤙🤝
Aquí opinan muchos que se creen expertos , que son los mejores y se las saben todas. Que más nadie sabe nada . Que son los únicos que conocen de herramientas . Y cuando vas a ver sus trabajos te das cuenta que son unos pobres Chapuceros del monton. / ese aditamento es útil y se suma a muchos más que siguen siendo perfectos para trabajar. / Sean humildes en su trabajo ... es la grandeza de un profesional
I have my friend but I don’t know if you beleive be but Is on my wishlist from years. Last year I finnaly get an Dewalt 887 impact driver and I am very happy. Is hard with the money in my Country because we don’t have that much money here and for hobby the tools are expensive.
I bought this years ago. It would be so much better if it fit into an impact driver and not just a combo drill. It’s been at in my bit box unused for years
Some people said "use drill and impact". And it's the way to go but if for some reason it's not an option i suggest to use 1/4 hex drill bit and a 2" bit with an impact if possible instead of this.
Good video. I have had a set of these from Kobalt and a set labeled Montana Tool. Not everyone has a dedicated impact driver, and this would be useful in harder woods or where you need to minimize the risk of splitting. I have worked in theater, and witnessed many an occasion where a well meaning volunteer overdrives a drywall a screw (or every screw) and completely splits a board(s) thereby weakening the corner of a flat.
Ah, I’ll just keep my apex with Phillips head in my impact and my countersink in my drill. That thing is way too clunky. I bet all kinds of diy handymen have bought that thing.
Had to get one of these what feels like forever a go. Used it to install cabinets. Worked great altho would be really tight in smaller cabinets. Also wore out the collar that held the removal bit in so it essentially became useless.
It's ridiculous that the bit size for this doesn't fit a 1/4" impact. You must use this in a drill - It won't work in an impact. The old Craftsman set worked with a 1/4" impact.
I have a couple of these over the years. Really good for piloting/countersink and screwing floorboards down. When they get dirty it’s hard to get the bit out to flip it over though.
Отлично, если бы металл в зенкере был качественный. У меня два из трёх бракованные. Купил набор в кейсе. Сплошные сколы в резьбе зажимных винтов! Винты выпадают!!!
What would stop me from getting this is I like to use my 1/4 inch impact for driving in screws. This is for a drill. For me I will just use my drill for drilling and impact to drive in the screws.
I have this. The two little screws in the countersink bit holding the drill bit often become loose, and the key that comes with the kit is not really the right size. Over the kit kinda sucks.
I can do that. Normaly to change the bit is possible but when you need it again you will lose it sometimes. This system is very good outside when you have to move. For example when you make a fance.
Oooo man I stand corrected, Home Depot right now. 8 piece $24.95 and 12 piece $21.95, I know that looks like it should be the other way but it’s not. Sale on the 12 piece for 12 more hours :) after that it’s $33.59 and it comes in a little yellow case to put on your work bench to never use again. Haha good job Internet I’m going to buy it now :)
I have this. Its cute. But due to its size, its not really practical for serious construction jobs, or in tight spaces. Plus I'd prefer a holder with a sleeve
Just as easy if not faster to just pull the shank and replace it from the chuck. Better to use 2 tools though in either case the drill bit gunna get HOT
Comprei um conjunto desse, aparentemente muito bom. Deu defeito com poucas vezes que usei. Siceramente fiquei frustrado. A ideia é boa mais não funciona.... Como usei pouco passou a garantia e se existisse e fiquei no prejuízo. A marca e excelente tenho tico tico da marca e não tenho nada a reclamar
LA IDEA ES BUENA, PERO AL PERFORAR CON LA BROCA AL TRATAR DE SOLTAR, SE SALE COMPLETA LA PIEZA Y QUEDA EN LA MADERA, EL BLOQUEO QUE TIENE ES POCO EFECTIVO 😔
A marca é boa, mas a ferramenta em si deixa a desejar. Comprei uma dessa, e com o passar do tempo começou a não segurar mais a parte móvel dela, onde sempre fica caindo . Deveria ser com mais magnetismo para segurar a peça sem que ela se desconecta sozinho mediante trabalho que está sendo realizado. Eu particularmente só uso máquinas da Dewalt, mas essa ferramenta aí não compraria novamente.
No need just use an impact drill and drive the screw half way then back it almost all the way out then drive the screw back in, no need for predrilling.
These things suck. I had a dewalt and a kreg. Both snapped easily. I’ll just stick to regular countersinks. Make It Snappy tools have a nice countersink set
Where I use it: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
We're cn I buy it sir
Price
@@NirmalSingh-ny7ro 10$
Ok
Link send
I have a drill, and in impact driver, the impact drives the screws while the drill drills the holes. Also no need for the downtime of switching bits
Yup much better setup
@@scottcoleman7304 More efficient to do it that way, considering if you buy a combo kit from any of the major manufacturers it usually comes with both.
You are right. Not anybody can afford 2 drills and when you work outside to a face is better with this tool. I will make a movie.
@@WorkSmart4U If you can't afford a Ryobi kit with an impact and drill I feel bad for you, because even the Ryobi tools aren't that bad
@@Barbaratio I do but not anyone in my country. I am dreaming to get my hands on a impact drill from years and only last year I did it. So...
Two reasons to use this tool. 1. You only own one power driver/drill 2. Your working in tight spaces where 2 drills isn’t an option. It’s great until you snap the drill bit or the bit gets worn out so I carry a spare as backup. Pro tip use medium(blue) loctite on the set screws.
You are right
What you mean you need two drills what about the freaking tools that comes with the drill itself
@@ZEKAYPRO when you predrill the wood is easy with 2 drills because you don't need to change the bit every time.
💙💙💙💙💙🖤🖤🖤🖤
🖤🖤🖤🖤🖤🖤🖤🖤🖤🖤🖤🖤🖤💙💙💙💙💙💙💙💙💙💙💙💙💙❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤💎❤❤❤❤❤❤❤💎💎💎💎💎💎💎💎💎💎💎💎💎
My drill has an easily removable chuck so i can just tighten a drill too the chuck so that the chuck and the drill is basicly one part
And i can then change from the drill and to a bit by just swapping between them easily
I can also just use the chuck as a screw driver or hand drill to make a pilot hole
Nice. I know that feature. Is nice to have.
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
Один шурик на повышенных со сверлом,второй на пониженных с крестовой битой. И нафига эти причиндалы(?)
I use it outside.
полностью согласен. а учитывая аццкий люфт сверла ее использлвание даже вредит. а вот фрезы для зинковки ничё такие.
Если ты где-то на верху то у тебя нет возможности таскать 2 шурупавёрта.
@@johannmoch3553 могу,просто поверь)
@@johannmoch3553 Right. I will make a video about that.
when you working fast , that sistem its not efficient, is better to have two drills , that the way I'm doing
I have to drill also. The system is very good when you work outside on a fence and is hard to have 2 drills. If you work inside is better with 2 drills. This is how I tested and worked for me.
@@WorkSmart4U
I’m gonna have to agree with the other guy. Two drills or manufacturing process it. Aka get the workpiece attached then comeback and predrill everything before sinking fasteners. Or if you are doing a deck with a kreg jig bribe a buddy with beer so he will run the other drill sinking screws right behind you.
juan gonzalez I am working with 2 drills for few years and know-how is it. When you have to move from place to place on a project is hard to have 2 of them with you. You don’t find it or is hard to take the screws and the 2 drills with 2 hands. I am working alone on my hobby project. I advise you to try it on a project for more than 2 hours and let me know. The price is 10$ soo. What is the problem with this system is that you broke the drill bit for predrilling 😔. I find a better predrill bit or a shorted one I think will be a great tool. For me as a beginner I think is a great tool and wanted to have it as fast as posible. Not everyone has two drills as beginner in my country. Thanks
System guys, it's got a Y in there. Ok bye.
Yep . Belt clips and 2 drills ... i've tried few quick release systems and are simply not reliable. They either take too much time or jam after few uses ...
Remember switching to other weapon is quicker than reloading... If you know what I mean.
I know.
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
Я обычное сверло на биту меняю быстрее, чем на видео
@@user-uj1zb2hw9j у меня их четыре. Но на шабашку беру только один. Самый новый)
@@user-om4xt3vy9o правильно, чтоб клиент цену не сбивал))!
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
This has been around for 40 years....
And yes they are awesome to have.
In my country arrived this year.
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
Эта бита стоит дешевле второго шуруповёрта?)
English Please
@@WorkSmart4U Is this bit more expensive than the second screwdriver?
@@user-gl8if5ol2p no. This bit is 10 $
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
Craftsman made this exact tool 15-20 years ago. I have it in my garage right now. Not as useful as one might think. Especially in this day of impact drivers.
For me is ok. When you work outside ans you have to move is better than 2 drills.
I have a cobalt one and it broke
Kinzie Burton how do yoh like the sistem?
Все новое,- это хорошо забытое старое.
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
!!!! Remalo cuando haces presión para fijar el tornillo, se desgasta demasiado el hexágono q esta en la mitad de ello y se atora x q es aluminio y si genera el desgaste no hay reemplazo de la pieza y toca comprar otro, lo digo x experiencia...👍 👍👍 Saludos desde MANIZALES COLOMBIA👍🤙🤝
English please.
Pro tip: clean your bit before switching.
🙏 but how?
I use a small wire brush. Light strokes.
The Bearcat 🙏. I will do that
@@thebearcat4735 you clean it every time you flip it???
@@papitosabe why not? It will last a lot longer if you keep it clean.
Aquí opinan muchos que se creen expertos , que son los mejores y se las saben todas. Que más nadie sabe nada . Que son los únicos que conocen de herramientas . Y cuando vas a ver sus trabajos te das cuenta que son unos pobres Chapuceros del monton. / ese aditamento es útil y se suma a muchos más que siguen siendo perfectos para trabajar. / Sean humildes en su trabajo ... es la grandeza de un profesional
☃️☃️☃️☃️☃️☃️❄❄❄❄❄
Disculpa, sabes cómo se llaman esas herramientas, esa abellanadora y ese acople?
@@luismiguel-hd6jl ahí en el título del video esta amigo así lo puedes buscar en ebay o Amazon!!!
DEWALT drill flip drive puedes buscarlo así amigo.
Te invito a ver tu trabajo y tu muestrame el tuyo. Quiero ver si así como roncas duermes...
When you already can't afford to have a separate drill and driver but can be convinced to spend 30 dollars on junk.
Sometimes when you are working outside is better then carry 2 drills and move around.
This is actually a very smart idea. Literally, just flip the bit over and save yourself some time and finding bits.
@@WorkSmart4U so what about having two bits? It's not the same? 🤨🤔
@@franciscobravo7157 For me no. Is not the same.
@@WorkSmart4U how many pieces your amazing tool has?
Two body... it's exactly the same. You just get impressed so easily.
Eu ainda não tinha visto essa belezura ja me interessei 👍
English please
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
These are great for when putting cabinets together.
Is very good when you have only one drill or when you work outside.
good
@@IbrahimKhan-qu7cd 👌👍
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
Or have a drill and impact like everyone else
I have my friend but I don’t know if you beleive be but Is on my wishlist from years. Last year I finnaly get an Dewalt 887 impact driver and I am very happy. Is hard with the money in my Country because we don’t have that much money here and for hobby the tools are expensive.
Not everybody can afford 2 drills my dude
@@ferdblu1946 thanks
Impact drivers are mostly marketing hype, no need for need for that loud ass piece of crap. Drill is all most homeowners need.
@@rafb145 but they look so sexy
I bought this years ago. It would be so much better if it fit into an impact driver and not just a combo drill. It’s been at in my bit box unused for years
Maybe they will make a new one to fin for impact. For me is very useful when I am working outside and you have to move.
Check out vcg constructions new video! I think that one is impact rated
Hobbs Gaming thanks
Yep me too! Its just too damned bulky. I found the Ryobi one is better and the bits are a bit tougher.
@@michaelcuff5780 I will wait for that one to arrive in my country.
I have a much older version of this still works great I put a little WD-40 dry lube for bicycle chains in it every so many uses.
Thanks for the tip. 🙏🙏🙏
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
Some people said "use drill and impact". And it's the way to go but if for some reason it's not an option i suggest to use 1/4 hex drill bit and a 2" bit with an impact if possible instead of this.
Sometimes when you work outside and you have to move is a tool good to have.
@@WorkSmart4U bro. It looks like you only work outside... what is the difference working outside or inside?
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
@@franciscobravo7157 For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
Omg the attachment I've never wanted
Why?
Haha exactly how is this useful over just another bit or switching to another drill
G K outside on a feance that you have to move.
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
Still guys , it's a great idea 💡
I love it.
th-cam.com/video/njDS6u3Vn8I/w-d-xo.html
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
😎 gostei muito parabéns pelo trabalho que você fais Deus abençoe muito vocês todos
Thanks I am glad you like it!
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
Good video. I have had a set of these from Kobalt and a set labeled Montana Tool. Not everyone has a dedicated impact driver, and this would be useful in harder woods or where you need to minimize the risk of splitting. I have worked in theater, and witnessed many an occasion where a well meaning volunteer overdrives a drywall a screw (or every screw) and completely splits a board(s) thereby weakening the corner of a flat.
🙏. Youa are 💯 right. Good to have tool if you don’t have 2 drills.
@@WorkSmart4U Just out of curiosity, you mentioned being in a different country. I’m here in the U.S. Where are you located?
@@jamesmocharski4803 I am from Romania.
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
Ah, I’ll just keep my apex with Phillips head in my impact and my countersink in my drill. That thing is way too clunky. I bet all kinds of diy handymen have bought that thing.
Is good when you are working outside and have to move. Is easy.
V
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
Had to get one of these what feels like forever a go. Used it to install cabinets. Worked great altho would be really tight in smaller cabinets. Also wore out the collar that held the removal bit in so it essentially became useless.
Thanks
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
I have it, not bad not fantastic i got it at Walmart, i had to return one because it got stuck they just need to polish the idea
I love it. I will make a video about that.
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
How do some people not understand how useful this is?
I love it.
But it's not, always have an impact driver and drill on me wherever I go, much quicker. Thing is kinda a gimmick
@@Barbaratio sometimes is better with this tool
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
It's ridiculous that the bit size for this doesn't fit a 1/4" impact. You must use this in a drill - It won't work in an impact. The old Craftsman set worked with a 1/4" impact.
Yes this is not for impact drills.
I have a couple of these over the years. Really good for piloting/countersink and screwing floorboards down. When they get dirty it’s hard to get the bit out to flip it over though.
crim7ind thanks for the tip.
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
По отзывам на всехинструментах спорная вещица. Ломается , по сути дорогая игрушка.
Yes I break few of them but I still use it. I will make a video with it.
800рублей это дорога?
@@mr.ba6au639 Во всехинструментах 1999 ₽
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
I bought $20 cordless cheap chinese drill for screwing, and with my stanley sbh i drill it. Come in handy.
Sometimes when you are outside is better with drill bit.
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
And it came down on my mind that you were going to get a good time
👍
Просто неудобная вещица!!
English please
Норм. Я такой пользуюсь
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
Отлично, если бы металл в зенкере был качественный. У меня два из трёх бракованные. Купил набор в кейсе. Сплошные сколы в резьбе зажимных винтов! Винты выпадают!!!
удерживающий винт мне подходит. сверло вместо этого сломалось.
Я бы купил второй шурик
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
Muy bueno la broca y destornillador quisiera uno donde lo venden muy bueno. 👍
English please
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
These have been around for like 15/20 years now
In my country arrived this year.
@@WorkSmart4U I’m sorry to hear my first set was Hitachi brand believe it or not then craftsman made a version
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
Idea: drill all your holes then switch the bit and then drill. You dont need this tool it’s basically just 2 bits but with extra steps
It easy than 2 bits. Sometimes is better then 2 drills.
And also when you counter sink holes typically you want the screw perfectly level with the board, and not 1/4 imbedded into the board
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
What would stop me from getting this is I like to use my 1/4 inch impact for driving in screws. This is for a drill. For me I will just use my drill for drilling and impact to drive in the screws.
You are right. Not anybody will have 2 drills and are cases when it is easy to work with one drill.
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
Este eu tenho e recomendo... muito boa
Olá, onde comprar e qual nome dessa peça?
José Joaquim da silva vm.tiktok.com/ZMdYCbuUN/
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
I have this. The two little screws in the countersink bit holding the drill bit often become loose, and the key that comes with the kit is not really the right size. Over the kit kinda sucks.
I don’t have the kit. Only this tool.
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
It would be really smart .. if u could put a link to where to find these suckers at
You are right. I will that in the future. vm.tiktok.com/ZMe3yUtoj/
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
I’ve got the set but the drill/bit doesn’t lock into place I’ve been sold a dud and as I can’t find the receipt I can’t get a refund or replacement??
I don’t have any ideea
Dewalt makes it look like they just invented this. Craftsman had this around for a couple of decades.
You are right.
Stanley also had.
For cabinet hardware ,nice
Yes, thanks. For working outside and move around is perfect.
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
I had that tool in 2001 thats not
new, I had it for doing custom
kitchens and baths...
In my country this year arrived.
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
What a wonderful tool !!!
🙏 thanks
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
I've had this forever. Didn't ever expect to see it here.
Now You did it. In my country from this year.
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
Even without this tool, DeWalt's drill does all this work If you use your brain
You are right.
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
It will have its uses.
But if u do enough diy / work to have to buy this bit. You probably already own two drills.
(Hammer and driver)
Probably but sometimes is easy to use just this bit.
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
Probably a dumb question but why not use a regular drill bit lol what’s so special about that ?? Someone please explain
I can do that. Normaly to change the bit is possible but when you need it again you will lose it sometimes. This system is very good outside when you have to move. For example when you make a fance.
@@WorkSmart4U awww okay thank you
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
That's cool but it's limited to that small skinny drill bit...
Yes it is. For me was ok working outside and having to move with online one drill.
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
The only thing I don't like when the screw shakes alot
Yes is posible.
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
A mí me duró solo unos cuatro meses y no le daba mucha batalla , el material es muy delicado no sirve para trabajos duros, compre dos y lo mismo
I work with soft wood and for me is ok. I will make a video about this.
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
Have a craftsman from the 90s that does the same thing. Never really used it. Always had an impact and drill.
Sometimes when you are working outside on a fance for example is very handy not to carry 2 drills with you
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
Kobalt has had one. Theirs is made by Montana but cost less.
Nice. When will be available in my country I will try thta one too.
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
Saludos desde Ayacucho Perú
🙋🏻♂️
This would not be a problem if ya just had dually drills
When you work outside and you have to move is very good.
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
Лет 10 назад такая фигня у китайцев мелькала, только поудобней, там вытаскивать не нужно было, а просто переворачивалось. Немного опоздали)
:)
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
They are great till the drillbit breaks or gets blunt.
You are right.
Oooo man I stand corrected, Home Depot right now. 8 piece $24.95 and 12 piece $21.95, I know that looks like it should be the other way but it’s not. Sale on the 12 piece for 12 more hours :) after that it’s $33.59 and it comes in a little yellow case to put on your work bench to never use again. Haha good job Internet I’m going to buy it now :)
🤣👨🔧👨🔧
Amazon had the 12 piece for $14 a few years ago...i should have gotten a couple
papitosabe not a bad ideea
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
La mecha es mas gruesa que el tornillo asi que el tornillo no va estirar lo suficiente va girar sin cumplir su funcion
English please
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
Lo tengo, y en la práctica si bien es útil, no es eficiente. Eso si, además del buen avellanador, el dispositivo es de muy buen material
I use it outdoor: th-cam.com/video/oA1ggfq-8zw/w-d-xo.html. It this easy to work with this tool than 2 drills.
Yeah this is only been around for about 15 to 20 years now
New in my country.
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
Es muy útil lo compre hace un par de años!!!!
Como se llama esa herramienta
@@SCRAPPI01 DEWALT Drill Flip Drive countersink drill bit
Gracias
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
This is niche use, u be better of having drill + driver than this, even the cheapest ones.
You are right but sometimes is better to use this tool.
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
Only thing I don’t like about it is that it doesn’t fit 1/4 inch impacts
Yes you are right.
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
I have this. Its cute. But due to its size, its not really practical for serious construction jobs, or in tight spaces. Plus I'd prefer a holder with a sleeve
The size is not the biggest key point. Is very useful when you work outside and you have to move and not carry 2 drills with to. My point of view.
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
Just as easy if not faster to just pull the shank and replace it from the chuck.
Better to use 2 tools though in either case the drill bit gunna get HOT
The problem is that moving around sometimes you lose it. This is very good when you work outside on a fence for example.
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
Probably more useful with a metal keyed chuck that you can’t open and close super easy
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
Nice tools. thanks
You are welcomed
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
I think Makita came out with those in the late 80s. I used to use them all the time.
In my country just arrived this year!
@@WorkSmart4U it's a great little tool. if I remember correctly you can also get different size countersinks.
@@paddlefaster I don't know that.
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
What’s the purpose of countersinking?
I always countersink the screws.
A recessed screw head that can be covered by a plug and wood glue
Ralph Chavez like this: th-cam.com/users/shortsthcmgnsxzhE?feature=share
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
Comprei um conjunto desse, aparentemente muito bom. Deu defeito com poucas vezes que usei. Siceramente fiquei frustrado. A ideia é boa mais não funciona.... Como usei pouco passou a garantia e se existisse e fiquei no prejuízo. A marca e excelente tenho tico tico da marca e não tenho nada a reclamar
I use it few times working outside and It was very good for my even If a have a lot of drills.
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
LA IDEA ES BUENA, PERO AL PERFORAR CON LA BROCA AL TRATAR DE SOLTAR, SE SALE COMPLETA LA PIEZA Y QUEDA EN LA MADERA, EL BLOQUEO QUE TIENE ES POCO EFECTIVO 😔
You are right but for me is ok. I use it like this: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
Una pregunta no hay una solución más fácil Imagínate que tengo que poner 1500 tornillos Pero entre poner y sacar esa aparatito me voy a enloquecer
English please
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
Bueno asta q vi todo el video y creo q para q la madera no se raje esta vien a hora si veo q funciona
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
得偉的這種專用的雙接頭確實有很好用👍👍
English please
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
A marca é boa, mas a ferramenta em si deixa a desejar. Comprei uma dessa, e com o passar do tempo começou a não segurar mais a parte móvel dela, onde sempre fica caindo . Deveria ser com mais magnetismo para segurar a peça sem que ela se desconecta sozinho mediante trabalho que está sendo realizado. Eu particularmente só uso máquinas da Dewalt, mas essa ferramenta aí não compraria novamente.
English please
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
Lo compre y carece de calidad, pasa que en ocasiones no traba la base y se sale del nucleo
English
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
We are not going to countersink it we are submarining that shit!
Yes you are right: th-cam.com/video/EeZCw-QfvIk/w-d-xo.html
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
That's cool and handy and all... but these tip attachments are getting as long or longer than the gun itself lol.
th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
extraordinarily great drill bit, it can be used to launch our work, can you order it, sis?
I use it outdoor projects like this: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html. You can order from Amazon. Look for dewalt flip bit.
Muy práctico! Buenísimo.
🙏
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
Great product. Consider a T-20 Torx bit instead of Phillips.
Thanks. I will do that. I love it!
@@WorkSmart4U I should say any Torx size. The grip is amazing. No strips.
@@tumbleweed1976 I work with torx also: th-cam.com/video/Dic--4bhoPg/w-d-xo.html
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
Can u give link for the tools...still looking the tool...thanks bro
vm.tiktok.com/ZMdKGuUcD/
Tq bro
You are welcomed
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
It removes much material by drilling so much. I hope the wood screws will hold up to pressure
I hope also.
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
Dewalt is life
Very good tool
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
I’ve had my craftsman bit like this for years.
In my country it is available from this year.
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
No need just use an impact drill and drive the screw half way then back it almost all the way out then drive the screw back in, no need for predrilling.
I didn't know that.
Thanks
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
Cool..... Remade craftsman tool from the 90s
👍
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
hooray, you saved 1 minute.
😃
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
Que útil esa harramienta
Yes it is.
Nice! I want one!
vm.tiktok.com/ZMewL6g4o/
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
These things suck. I had a dewalt and a kreg. Both snapped easily. I’ll just stick to regular countersinks. Make It Snappy tools have a nice countersink set
👍
PZ саморез крутить битой PH это очень умно...
Thanks
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
Great I like it! It seems to me craftsman had a similar tool awhile ago.....
Thanks
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
Это всё прекрасно конечно , но лучше иметь и шуруповёрт , и импакт.
Craftsman made this like 20 year’s ago
I don't live in your country. In my country this year I have purchase it.
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html
Como se arregla cuando el calce se afloja?
vm.tiktok.com/ZMdWuHEw9/
For me this is the best tool for this kind of projects: th-cam.com/video/oQRWcOBo8xg/w-d-xo.html