If every TH-camr could do videos with detailed explanations like u bruh, most people won't need to be going to school. This is excellent, thanks so much UberGeeks .
Listen man, you helped me complete an install today. Without this video I wouldn't have been able to finish the job. She paid me cash. Without this extra money I dont think I would've made rent this month. All I can do is drop a like and subscribe, but I thank you truly, from the bottom of my heart.
This was the most helpful video that I have seen as it pertains to setting up a wireless bridge. I am not a computer expert, so having someone take the time to explain it thoroughly using Windows control panel was very helpful. Thank you so much for making this video.
Excellent video. Clear. Covers everything one needs to know. And we can HEAR you. So many try to do helpful videos but they do not tend to their voice and often we cannot hear what is being said. Your voice volume is GREAT.
great videos. Do you have a setup video to do a bridge form A to B and then B to C and B to D? I am trying to share my ISP from my house to my office in another building across street and then have the office bridge to 2 other buildings in opposite directions. I could get the bridge from router in A to B working with a switch in B to connect the Station to along with my pc and NVR, but the bridge AP connected to this switch doesn't seem to work. So hoping you have something to show this... I'm guessing its a issue with IP's or using the same switch for the injection to B side AP's to C and D so that I have 1 Station and 2 AP radio on same switch.
Cannot do A to B, then B to C and B to D. The B is a "station", which means B does not send out bandwidth. A is "Access Point", which sends out bandwidth. Meaning, the C and D configuration will be "station" and they are looking for A the "Access Point".
What you can do is. A to B From B, into unmanaged POE switch. Then have another B.1 connect to the same unmanaged POE switch. Have B.1 send signal to C and to D.
You're a great teacher. You teach with the beginner in mind. I am trying this out today. My question: Does the radio has to be mounted above the building for a clear line of sight?
Hello, great video. My setup is one device at my Building A (my home). I was hoping to shoot a wifi extender signal to my boathouse which is about 200 feet down a path so my TV and other devices have wifi. Do I need a second M5 device?
Of course u do... listen to his explanations well..to get ur home wifi connection to ur boathouse..u need two of either the m2 or m5 which ever u connected in house A
Thank you so much , amazing tutorial for amateurs like me. Do you know if there are any tutorials which explain how to set antennas/two bridges to get full signal ? Thanks a lot again !!
interesting video. I wanted to ask you some questions because I didn't understand some things. I have to move my signal from house A to house B. do I connect the first antenna to my modem (house A) and set it to non-static without changing the IP? I would like to connect a modem router for wifi to house B. How should I configure it? Thank you.
Loved your explanation. For whatever reason, my Building A station, does not show up when I scan for networks. I'll be honest that I did disconnect Building A point before I got to this point since my router and where my computer are at a different location. any suggestions?
I configured the A station but when I went to do the B, the "Hello" SSID doesn't show up on my list of addresses....? Tried redoing the whole A setup and it still isn't showing when I try the B. What am I doing wrong???
I have 2 - M2 locos setup in PTP / AP repeater mode. (One on the side of my patio connected to the router / ethernet and it's facing the one on my barn for wireless internet) It works great but, I'm not able to login to each individual nano station, to change the settings / update firmware while connected to the new Ubiquiti Wi-Fi. (Right now, I just connect to each via the ethernet cable). Is this possible to have it setup like that? I noticed none of the Ubiquiti server stuff, doesn't show the networks unfortunately.
Great video, thank you! I am setting up the B side, but no SSID is showing up for my A side when I press "scan" even though the popup shows 3 other networks. I have my A side ca le connected to POE, not LAN, and B to POE and my computer.
Thanks for the video. Can the source for "station" unit be any in AP in my network? I have a outdoor AP which has a pretty good signal to shed. I want to have an ethernet connection with router>switch in the shed. If i buy only one nanostation unit and configure it as "Station" would this work?
I'm a bit confused on one part of your diagram (on the piece of paper). On the B side the yellow wire from the Loco going into the POE port of the injector (hence it's getting the power). You have listed on your diagram a CAMERA POE with the blue wire. You have already used up the POE on the injector. I don't see how the POE Camera is getting power in this situation by plugging it into the LAN port? I assume you'll need second POE injector and you would plug another cable from LAN to LAN on both injectors and the POE Camera to the POE port?
Can you setup the “building A” as AP Repeater instead of access point? I have wifi on my back porch, just need to shoot it over to my shop. This would eliminate the need for isp running a cable to my back porch into the nano. Im only shooting to shop about 50 yards away.
Simon, All is working will with my M5 setup. Thank you. I do have a question. I have house "B" connected to a switch. The switch is connected to a WiFi extender that is setup as an access point. My computer is connected by an ethernet cable to the switch. I want to access my computer remotely from another location. I will need to set up port forwarding to the router. I will need port 50001 and port 50002. Will having the M5 between the router and the computer be an issue? I also need to set the IP Address of my Server to static so it will not change if the computer is restarted. Will this be an issue? Do you have any recommendations for any free DNS service? I know I am asking a lot of you but, you helped me set up the M5's so easy and you are light years smarter than I.
Is there any magic needed if adding another set of these units to extend the bridge to another building...so two AP and two Stations linked together on the same network
If I replace the station b with a new one, (old one got wet) do I need to reconfigure from the start? Or will I be able to log into the station program and select the acces point name? It was set up by another party. Thanks!
I just purchased this same setup but my home network is .0.1 and the nanostations are 1.20 / 21. I tried DHCP and static to 0.20 / 21 but it's working. Ubiquiti email support is non existing. any idea what else I can try? I can't change my ISP address.
This tutorial show point to point connection, but I want 360 degree access point and If I understand it correctly, in the configuration you did . I will just call the other builder as Access point right .? give answer fast I am working on them . Thank you
Hello I have a pair of loco m5 wireless bridge from my house to the shop, ever time I loose power I have to factory reset and reset up the parameters to get online again. Is there a better solution?
Can I plug another access point to the end of the blue cable at the building B, the third access point to give the wireless internet inside building B, so the house device can connect to the third access point instead of another router ??
With your hellp setting up my M5's was a pice of cake. Your the man! I do have a problem maybe you could help me with. I tested them after I set them up and they worked fine. House A the access point is only about 4 1/2 feet off the ground with a rain down spout about 3 feet in front of and about 1 foot to the right of the access point. I took the station to house B and hooked it up temporarily to see where I got the best signal. I could only get the first bar (red) to light. During set up I turned the power down to 7 or 8 as the distance between the two is 100 yards with good line of sight. Do you think the down spout is hurting my signal? House B is lower than house A. That is why the access point is so low to the ground. I do not have any other place to put the access point because of trees to the right of the access point. What do you think? Thanking you in advance.
Am going to ask a really basic question. When one sets up an M5 as an AP or access point, can other laptops connect to it as well, or is this JUST for the connection to another M5 (station)? tx
Yes any device can connect as long as you know the password to the wifi network it is broadcasting, it is a narrow area of connection tthough, more point and shoot, like a Beam.
@@UbergeeksBiz I purchased a pair and the best I can get speed wise through Ookla is 280mbps and 60 upload. I have 1000 down and 90 up coming into my home should I be expecting faster
@@jamesfinlay1364 When comes to bridging network, expect the bandwidth to drop by 50%. You can try playing with dBm if can increase speed. Hope you have a clear sight from A to B
@@UbergeeksBiz ya I have a clear line of sight. I have spent days configuring the dBm and I think I am going to get the best I can from it. Thanks for your help
I’m trying to setup a connection to get internet from a house 900’ away from second home. Not a clear line of site (brush no building) I bought a rocket prism r2ac and waiting on the antenna and the nano station m2 get here. Is this an over kill and I should just order another nano station? I’m old and technically challenged. Thanks for any advice.
@@UbergeeksBiz thank you for the quick reply. I actually did order a second one right after watching your video. I’ll send back the rocket and cancel the antenna, that’ll save me over $350. Thank you so much. You have a new sub. I might have to look to you to get it all set up and configured but your video actually makes it look pretty easy. Cheers
@@papabapyro8169 If you need help to setup, give us a call at 808-236-4335. we can schedule a remote session at $99 flat rate. I do have other ubiquiti videos on how to setup. try search on the channel. good luck to you and let us know how you did after.
Just watched this video again. Got my second nsm2 today so I’ll be trying to setup tomorrow, wish me luck. Thank you so much for making this video. I screenshot a lot of steps. Cheers
I have two old version of Nano Station Loco M5. One is 5Ghz Outdoor/Indoor MIMO 13dBi CPE. The other one is One is 5Ghz Outdoor/Indoor airMax 13dBi CPE. What is the difference and which one is better?
If every TH-camr could do videos with detailed explanations like u bruh, most people won't need to be going to school. This is excellent, thanks so much UberGeeks .
Thanks alot i have really enjoyed the learning Sir.God bless you.I 24:32 ❤ would like to learn on how to setup a WiFi hotspot zone.
Listen man, you helped me complete an install today. Without this video I wouldn't have been able to finish the job. She paid me cash. Without this extra money I dont think I would've made rent this month. All I can do is drop a like and subscribe, but I thank you truly, from the bottom of my heart.
This video was so excellent. Needed to deploy these bridges in a couple hours and watched this video at 5am. Perfect and thank you!
Very very excellent
Best explanation I've seen. I set one of these up a couple of years ago and needed a refresher. Thanks!
You gave the best instructions regarding setting up the Nanostation Loco M5. They were very detailed, easy to follow, and clear. Thank you Simone.
You are welcome. Glad the video helped.
This was the most helpful video that I have seen as it pertains to setting up a wireless bridge. I am not a computer expert, so having someone take the time to explain it thoroughly using Windows control panel was very helpful. Thank you so much for making this video.
Excellent video. Clear. Covers everything one needs to know. And we can HEAR you. So many try to do helpful videos but they do not tend to their voice and often we cannot hear what is being said. Your voice volume is GREAT.
Oh my God! This was so good explanation, you have covered all the steps in a very easy way!. Thank you so much!
This guy is awesome, internet connection for dummies, well done..
Excellent presentation of the setup process. Easy to understand. Well done!
Really excellent explanation. I had my 2 x M5 Loco side by side like yours and the video made the whole thing very easy. Very many thanks!
You are welcome. Glad the video helped.
This presentation made every step clear to understand and the explanation tied everything together at the end. Thank you
Thank you for getting to the point and not rambling, best video I have watched in some time!
Glad you enjoyed it!
NOW this is a good video, well done !! I'll have to share this for people !!
Very helpful. Followed the steps and I had no issues. Thank you!
awesome video. so a simple router on the "B" end will allow wireless service in the building correct? any router suggestions?
these are best instructions for setting up the Nanostation Loco M5. it was very detailed, easily explained and understood and . Thank you very much.
Glad it was helpful!
Thanks!
Thank you for the super thanks. I appreciate it
Thank you for the detailed instructions. Everything worked immediately during the first installation.
Thanks much, I have installed nanostation m2 to connect POE CCTV, it works well. I guess m5 is faster, I will try m5 soon.
best explanation on youtube. thanks!! the process is less frustrating this way. :)
I've never seen a video like this. You're a hero 🥳🥳🥳🥳🥳
The illustrations helped so so much
شكرا لك من اليمن🇾🇪.
great videos. Do you have a setup video to do a bridge form A to B and then B to C and B to D? I am trying to share my ISP from my house to my office in another building across street and then have the office bridge to 2 other buildings in opposite directions. I could get the bridge from router in A to B working with a switch in B to connect the Station to along with my pc and NVR, but the bridge AP connected to this switch doesn't seem to work. So hoping you have something to show this... I'm guessing its a issue with IP's or using the same switch for the injection to B side AP's to C and D so that I have 1 Station and 2 AP radio on same switch.
Cannot do A to B, then B to C and B to D.
The B is a "station", which means B does not send out bandwidth.
A is "Access Point", which sends out bandwidth.
Meaning, the C and D configuration will be "station" and they are looking for A the "Access Point".
What you can do is.
A to B
From B, into unmanaged POE switch. Then have another B.1 connect to the same unmanaged POE switch.
Have B.1 send signal to C and to D.
You're a great teacher. You teach with the beginner in mind. I am trying this out today.
My question: Does the radio has to be mounted above the building for a clear line of sight?
Very well explained, but can we use access point's network directly to connect as wifi on mobile?
That is my issue..without the use of plugging another Ethernet cable to another router ??
@@stevejacobs5794 Yes, you can connect access point network on mobile via wifi ,but make sure you disable Airmax else it won't work.
This was a fantastic "how-to". Thanks!
Hello, great video. My setup is one device at my Building A (my home). I was hoping to shoot a wifi extender signal to my boathouse which is about 200 feet down a path so my TV and other devices have wifi. Do I need a second M5 device?
Of course u do... listen to his explanations well..to get ur home wifi connection to ur boathouse..u need two of either the m2 or m5 which ever u connected in house A
10/10 video, very easy to understand
Thank you so much , amazing tutorial for amateurs like me. Do you know if there are any tutorials which explain how to set antennas/two bridges to get full signal ? Thanks a lot again !!
interesting video. I wanted to ask you some questions because I didn't understand some things. I have to move my signal from house A to house B. do I connect the first antenna to my modem (house A) and set it to non-static without changing the IP? I would like to connect a modem router for wifi to house B. How should I configure it? Thank you.
Loved your explanation. For whatever reason, my Building A station, does not show up when I scan for networks. I'll be honest that I did disconnect Building A point before I got to this point since my router and where my computer are at a different location. any suggestions?
I configured the A station but when I went to do the B, the "Hello" SSID doesn't show up on my list of addresses....? Tried redoing the whole A setup and it still isn't showing when I try the B. What am I doing wrong???
I have 2 - M2 locos setup in PTP / AP repeater mode. (One on the side of my patio connected to the router / ethernet and it's facing the one on my barn for wireless internet) It works great but, I'm not able to login to each individual nano station, to change the settings / update firmware while connected to the new Ubiquiti Wi-Fi. (Right now, I just connect to each via the ethernet cable). Is this possible to have it setup like that? I noticed none of the Ubiquiti server stuff, doesn't show the networks unfortunately.
Very very clear and helpful
Thank you very much!
You are welcome. Glad the video helped.
Great video, I think you forgot to check WDS (Transparent Bridge Mode)
thank u so much for your explanation. everything is so clear and easyly to understand
absolutely great video. The explanation was on my level. Thank you.
Glad it helped!
Great video, thank you!
I am setting up the B side, but no SSID is showing up for my A side when I press "scan" even though the popup shows 3 other networks. I have my A side ca le connected to POE, not LAN, and B to POE and my computer.
Thanks for the video. Can the source for "station" unit be any in AP in my network? I have a outdoor AP which has a pretty good signal to shed. I want to have an ethernet connection with router>switch in the shed. If i buy only one nanostation unit and configure it as "Station" would this work?
I'm a bit confused on one part of your diagram (on the piece of paper). On the B side the yellow wire from the Loco going into the POE port of the injector (hence it's getting the power). You have listed on your diagram a CAMERA POE with the blue wire. You have already used up the POE on the injector. I don't see how the POE Camera is getting power in this situation by plugging it into the LAN port? I assume you'll need second POE injector and you would plug another cable from LAN to LAN on both injectors and the POE Camera to the POE port?
Прекрасное видео. Great tutorial. Thanks a million!
what a great teacher. Thank you.
I have 2 points Located 3Km apart. What recommended to use: Nanostation loco m2 or m5?
Between the 2 points there is an open line of sight.
Can you setup the “building A” as AP Repeater instead of access point? I have wifi on my back porch, just need to shoot it over to my shop. This would eliminate the need for isp running a cable to my back porch into the nano. Im only shooting to shop about 50 yards away.
Does the CAT cable coming from my ISP service modem supposed to be plugged into my LAN/WPS jack or Ethernet jack from my modem?
Very helpful video. Saved a lot of time and effort on my end.
Great to hear!
Regarding the IP source in your video, can that connection (LAN port) be sourced from a router connection?
Nice video! at station (B) we can connect wirelessly?
Unfortunately not
Just a question, if i want to connect some device directly to the AP, it going to work without have the other nano station as workstation?
Simon, All is working will with my M5 setup. Thank you.
I do have a question. I have house "B" connected to a switch. The switch is connected to a WiFi extender that is setup as an access point. My computer is connected by an ethernet cable to the switch.
I want to access my computer remotely from another location. I will need to set up port forwarding to the router. I will need port 50001 and port 50002. Will having the M5 between the router and the computer be an issue?
I also need to set the IP Address of my Server to static so it will not change if the computer is restarted. Will this be an issue?
Do you have any recommendations for any free DNS service?
I know I am asking a lot of you but, you helped me set up the M5's so easy and you are light years smarter than I.
sir this is a 150 mbps. megabits per scnd not Megabytes per scnd..correct me if im wrong..
excellent content here - thank you my friend.
You did an absolutely fantastic video. Subscribed. Thanks.
Why DHCP instead of static on the wireless network management?
Is there any magic needed if adding another set of these units to extend the bridge to another building...so two AP and two Stations linked together on the same network
Awesome, clear and easy steps.
If I replace the station b with a new one, (old one got wet) do I need to reconfigure from the start? Or will I be able to log into the station program and select the acces point name? It was set up by another party. Thanks!
Hi, once we already point to B area. how strong is the internet signal at B area? 500 meter can?
I have challenges on installing ubnt.the radio is not communicating with other radios.what will I do?
Thanks for the vid. Easy to follow
Amazing explanation for Nano station M5 thanks you for your help me
Happy to help
I was told I needed a new nano and I’m having issues setting up the new with the old. Any advice?
How can I make it supply Internet wireless without putting a router
Me too..if I don't have a router where I use another Ethernet cable can't I just connect straight from my phone wifi nd start browsing
I just purchased this same setup but my home network is .0.1 and the nanostations are 1.20 / 21. I tried DHCP and static to 0.20 / 21 but it's working. Ubiquiti email support is non existing. any idea what else I can try? I can't change my ISP address.
Can the A device/ Access point connect to a wireless network?
So using the the A will only function as a router
This tutorial show point to point connection, but I want 360 degree access point and If I understand it correctly, in the configuration you did . I will just call the other builder as Access point right .? give answer fast I am working on them . Thank you
Did it work as an access point...?
@@djblaccs your explanation is good , but can you recommend me long range single access point for 4-5km not p2p connection Is possible ?
How would I connect a wireless access point to the station (B)?
Great vid!
Is the setup same for the nanostation loco m2?
Hello I have a pair of loco m5 wireless bridge from my house to the shop, ever time I loose power I have to factory reset and reset up the parameters to get online again. Is there a better solution?
Great video, thankyou! Helped me so much!
You are welcome. Glad the video helped.
Nice detailed explanation, that is very excellent, thank you so much for this great video
You're very welcome!
great video thanks awesome video. very easy to follow. cheers
Very good job u did!
After the full set up can u get wifi network or u will need another router?
need another router in B building
Excellent Video and explanation! Thank you
Can I plug another access point to the end of the blue cable at the building B, the third access point to give the wireless internet inside building B, so the house device can connect to the third access point instead of another router ??
You can daisy chain these, they just need programmed as continuous bridges from House and one access point at the end of said bridge.
Good presentation. Thank you.
How can I reset this? Cant log back in to set up the B Side
With your hellp setting up my M5's was a pice of cake. Your the man!
I do have a problem maybe you could help me with.
I tested them after I set them up and they worked fine.
House A the access point is only about 4 1/2 feet off the ground with a rain down spout about 3 feet in front of and about 1 foot to the right of the access point. I took the station to house B and hooked it up temporarily to see where I got the best signal. I could only get the first bar (red) to light.
During set up I turned the power down to 7 or 8 as the distance between the two is 100 yards with good line of sight.
Do you think the down spout is hurting my signal? House B is lower than house A. That is why the access point is so low to the ground. I do not have any other place to put the access point because of trees to the right of the access point.
What do you think?
Thanking you in advance.
You fixed it !
I do think the line of sight is important for great signal. Also you can play with dBm frequency by cracking it up to max
lifesaver. very good video. thank you a lot
Am going to ask a really basic question. When one sets up an M5 as an AP or access point, can other laptops connect to it as well, or is this JUST for the connection to another M5 (station)? tx
Yes any device can connect as long as you know the password to the wifi network it is broadcasting, it is a narrow area of connection tthough, more point and shoot, like a Beam.
God damn GOOD teacher 👍✌️🙏 I subscribe immediately
I wish I could like it ten times 💯💯💯💯
Thank you
Can you connect an AP into "B" m5?
Hi, I followed the set-up and still don't have internet on pc via Ethernet at point B
Can I work with just one AP?
Hi great video have you ever used the nanostation loco m5?
yes, I have. Why ?
@@UbergeeksBiz I purchased a pair and the best I can get speed wise through Ookla is 280mbps and 60 upload. I have 1000 down and 90 up coming into my home should I be expecting faster
@@jamesfinlay1364 When comes to bridging network, expect the bandwidth to drop by 50%. You can try playing with dBm if can increase speed. Hope you have a clear sight from A to B
@@UbergeeksBiz ya I have a clear line of sight. I have spent days configuring the dBm and I think I am going to get the best I can from it. Thanks for your help
Thank you!
What if I do not have a pc, how do I set it up?
I’m trying to setup a connection to get internet from a house 900’ away from second home. Not a clear line of site (brush no building) I bought a rocket prism r2ac and waiting on the antenna and the nano station m2 get here. Is this an over kill and I should just order another nano station? I’m old and technically challenged. Thanks for any advice.
I would order two the same Nano Station.
@@UbergeeksBiz thank you for the quick reply. I actually did order a second one right after watching your video. I’ll send back the rocket and cancel the antenna, that’ll save me over $350. Thank you so much. You have a new sub. I might have to look to you to get it all set up and configured but your video actually makes it look pretty easy. Cheers
@@papabapyro8169 If you need help to setup, give us a call at 808-236-4335. we can schedule a remote session at $99 flat rate. I do have other ubiquiti videos on how to setup. try search on the channel. good luck to you and let us know how you did after.
Just watched this video again. Got my second nsm2 today so I’ll be trying to setup tomorrow, wish me luck. Thank you so much for making this video. I screenshot a lot of steps. Cheers
@@papabapyro8169 Cheers. Good luck !! Let us know how did you do after.
Having difficulty getting backing into "b" with my laptop to check settings. Any recommendations?
You can't get back into ubiquiti B ?
I think better will be set static ip
So awesome…u rock
Exelente!!!!
I have two old version of Nano Station Loco M5. One is 5Ghz Outdoor/Indoor MIMO 13dBi CPE. The other one is One is 5Ghz Outdoor/Indoor airMax 13dBi CPE. What is the difference and which one is better?
About the same
@@UbergeeksBiz
MIMO version is made in 2009 and AirMax is made in 2013. Which one is better. The AirMax version becomes more hot than Mimo.
@@habibullahsamander2798 preferred mimo
@@UbergeeksBiz Sorry, MIMO version is made in 2009 and Airmax is made in 2013.
Good explainations UberGeeks....