Ubiquiti NSM5 Point to Multi Point
ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2024
- I'm setting up ubiquiti nanostation m5 for point to point Wifi or point to multi point Wifi.
This allows me to cover about 1 mile distance of sending the signal.
It's for outdoor and indoor use.
If you are using other nanostation model, the setup and process more or less the same.
Where can I buy the product ?
NSM2
amzn.to/323eypZ
amzn.to/3ikvNdx
locoM5
amzn.to/3KV3uPa
NSM5
amzn.to/3h3o80m
locoM2
amzn.to/2GwzxsN
POE switch
amzn.to/3tqa36D
amzn.to/3ii0iB3
Reolink 4k camera + audio
amzn.to/3ijvdwG
amzn.to/3L4eH05
Mounting Kit
amzn.to/3buYOPw
amzn.to/3ijnhf5
amzn.to/3i2DVhe
-----------------------------------------------------------------------------------------------
If this video is helpful or helped you, it will be nice to have a cup of coffee.
Appreciation support to UberGeeks via PayPal:
bit.ly/3badyS4
Subscribe to our channel for all our latest videos!
/ ubergeeksbiz
Follow us on Facebook:
/ ubergeekshawaii
Follow us on Instagram:
/ uber_geeks
As an Amazon Associate I earn from qualifying purchases.
As an eBay Partner Network I earn from qualifying purchases.
Legal Disclosure:
UberGeeks video(s) or information provided on this website does not, and is not intended to, constitute legal advice, constitute IT professional advise, information technology expert, or tech related material; instead, all information and content available on this are for entertainment purposes only. No information contained in this video shall create any express or implied warranty or guarantee of any particular result.
UberGeeks shall not be held liable for any damages, losses, injuries, loss of data, or harm arising from the use of information or techniques presented in our video(s) or information provided on this website. By accessing and using our content, you agree to release us from any liability.
Participation in any activities or experiments presented in our video(s) is entirely voluntary. If you choose to replicate any actions or experiments, exercise caution, and prioritize your safety and the safety of your equipment.
Thank you for joining us on this IT journey. We hope you find our video(s) enjoyable. Remember, your participation in this channel is at your own discretion, and we encourage you to use the information responsibly and safely.
#ubiquiti #netgear #reolink - แนวปฏิบัติและการใช้ชีวิต
dBm is power level relative to 1 milliwatt. So 6 dBm is 4 milliwatts, 10 dBm is 10 milliwatts, 20 dBm is 100 milliwatts, etc. 26 dBm is 400 milliwatts.
Hi. Thanks for explaining.
Does that also mean higher dBm has further range ? Or bandwidth?
@@UbergeeksBiz in a sense, both. Information (what is called "throughput") in a channel is a function of channel bandwidth and signal-to-noise ratio. Read up on Shannon-Hartley Theorem for details. More power improves signal-to-noise ratio, which in turn improves information/throughput. More power would allow you to cover more distance, but increased distance will reduce power. Read up on free-space path loss for details. I think it's admirable that you're reducing power for environmental benefit, but the amount of power saved will be very minimal. The tangible benefit of reducing power will be (a) reducing heat in the power amplifier (which will extend the life of the equipment) and (b) reducing errors in the receiver from signal overload.
@@DavidWitkowski Thank you for explaining. I really appreciate it.
Pin you on top. lol
Also may be important to see wat the FCC (or other government authority) allows also
Watched 3 other You Tube versions of the Nano station M2 setup. Both other attempts failed. Only needed to hook up the AP and one as a receiver. Instructions were clear, easy to follow and RIGHT ON. Good job - THANK YOU
Glad it helped
Best tutorial on tech i've ever watched. Love how you filled the time when B was booting haha
Best tutorial ever!! You explain everything to the finest detail. Thank you
You are welcome. Glad the video helped.
Thank you for your time and a step by step demonstration/ tutorial
You have just extended my life. I was having headache from other tutorials but you have explained everything in detail.
You are welcome. Glad the video helped.
How much do you earn with this comment? 1/10 of a cent? :-D
GET A JOB!
I think what gets most people is the setting your PC with a static IP to access the devices initially.
@@UbergeeksBizI see this info is a yr old. My question : is the NS5 still a good system to go with, or is there an easy configuration good quality point to multi point set up you can recommend
good thing about these is they can be used to connect to just about any other AP or wifi router that transmits dual band 2.4GHz and 5GHz or you can use the NSM2 model if the router only transmits 2.4GHz
I really Love how you explain all this. It makes one understand so weel how this things works. Im soon starting ISP services here in Kenya, and I have been doing thorough research. Thanks for sucha wonderful video..
Glad it was helpful!
Your explanation is simple and clear to follow.....thanks
Im here to thank you for your complete explanation 🙏......
you are really a good teacher, i do love teaching
Best teacher on TH-cam 👍
Thanks
very well done video. great articulation of how to setup and configure these devices.
Amazing tutorial, better than any other I have watched on this you have a new suscriber and a like, not often I ever comment either!
You are welcome. Glad the video helped. Thanks for the sub !!!
Another great video. Thank you so much for making things clear.
good day sir tnx in your vedio how to comfigure the ubnt ..my question sir how to control the speed of the station antenna or ho to config to assign the speeg lemet anothe station tnx and more power
This answered so many of my questions, thank you very much. What a great video.
Great video! I appreciate the drawings, the information was very easy to understand.
Best video ever it really understands it all.
Glad the video helped.
Very helpful! Thank you for this in depth video!
You are welcome. Glad the video helped.
nice tutorial..............learnt alot, i think am good to do point to multipoint
Depending on where yoru host AP is located determines if you can do a point to multipoint with nanostations. if you have a point not in LoS of the host AP then you will not be able to do it this way and you will need to get a Rocket M5 with it's omnidirectional antenna to use as the host AP. You will be limited to 100 Mbps lan and 802.11N bandwidth throughput.
The M series is EoL now replaced by the AC5 and Prisim series. NSAC5 Locos on ebay are cheap enough that it is worth just getting these later models to have gigabit lan and 802.11AC bandwidth throughput just be aware that the AC5's do not come with a poe injector so you will need to source some 24 volt gigabit lan injectors.
Thank you for your help. Your videos have helped me a lot.
Very well explained. and in simple language.😇
Great vidéo very informative,
Can you do a video on latitude and longitude. (Location).
Would love to see set-up process with a Mac, if possible. Excellent video, thanks! Do the routers in A,B, and C have to be the same?
You are welcome. Glad the video helped. Yes, ABC are the same
Buen video, bien explicado no hablo ingles y comprendí a la perfección.
Thanks a lot u have improved my networking skills
you are welcome.
Much love from Africa.
Best detail ever, thank you.
Very well done tutorial. Beautiful.
Thumps up for the nice tutorial, guess is the among the best.. And watching from the Gambia...
You are welcome. Glad the video helped.
Can you pair a station to another station? Or do they only connect to the main access point?
I'm trying to daisy chain these antennas the first one is not in line of sight on the last 4. Is that possible with these?
This allows you point to multi point
you are the best in this!
Very educative video. Can I do this using the ubiquiti nanostation loco m2 , 100m apart?
whats the difference if I set up the two stations as access point so they can produce wifi?
Its a good video however you missed a very important point which is what if house A is in between B & C which makes the angle around 180 degree.
Has nothing to do with it.. As it's in Bridge mode..All the Houses point back to the Source point A..
@@WizzRacing I don't think ur right. I doubt it would work shooting a 180
Bonehead
@@cattlecreekphotographybyto8954 That's my point I agree that there is a giveaway angle for the nanostation but definately not 180 degrees, I still haven't figured this out and never got a good answer from anybody yet.
Very informative video.
What is the maximum angle that stations can be connected?
The spec says Beamwidth 43° (H-pol) / 41° (V-pol) / 15° (Elevation).
Is that what I am looking for?
Great tutorial
I have a network and need to expand it to other buildings. We are using fortiswitch. Can i connect both forti switches with mt5. And the ip address is assigned from fortigate firewall.
love the drawings
Thank you sir I am speaking from Bangladesh looking very beautiful
You are welcome. Glad the video helped.
Great video, very helpful. Cheers.
Thank you so much very clear.
The video is very helpful ❤️
I really enjoyed your video. I wish to know if you configure mikrotik router?
Thanks for this video
u are grate u make things simple
Thank you
I have a question I have a nsm2us and have a locom2 coming. Didn’t realize I ordered two different models. Will these linkup ok ? If so is one better for ap/client. Thanks really appreciate your help.
thank you very much
Do you know what grounding equipment I need to reduce power surges?
Great Video Sir
May I please ask.
While the NSM5 are communicating at 5GHz. With a dual band router sitting at B, can I also connect 2.4GHz devices?
Best tutorial ❤
Followed and understood
Thanks for your nice tutorial,am trying this but upon searching my first device am frequencies there is no list of WiFis that I gonna select.
You are welcome. Glad the video helped.
good video.......one question please///can a secondary port power on another nano station?
Nice job,
Is it possible to connect one mikrotik router to two data lines, eg two modem routers, just in case you want to improve speed?
In one station for example say B, can you connect to two routers one from secondary port in ubiquiti and another in the poe LAN?
Thanks u for ur helpful information 😍❤️
My pleasure 😊
Thanks a lot, Sir
will it work according to this scheme if the main point is A, house B will also be where you draw it, and house C will stand in the place where the word "point" is written in your scheme? distance 30-40 meters
Yes, it will work
Video is really helpful, awsome
You are welcome. Glad the video helped
thanks from Africa.suppose you use the WAN port on router on station B,would you get internet access
Why you didn’t off the air max?
Thank You.
Thanks for your help
You are welcome. Glad the video helped.
Always the best 💯💯💯
You are welcome.
Assuming the home is in between Building B an C? will the signal still go through please?
Watching from Voi in Kenya Africa.. It looks like you use the same ubiquti devices but the settings are different, i.e access, bridge or a station
Use Access Point for A building and Station for B building
@@UbergeeksBiz Now I understand
Can we use only use first one As Access point and share my router wifi through it to my neighbor , 50ft away ???
hello, connected Station B, the to thr router but the gadgets are connected to the wifi but without internet. Kindly help
Very helpful
merci infiniment 💯
Every time I switch to receiver unit and type the 192 code in browser, it says the site can’t be reached. Check internet connection
I have these set up to my outside office, but the signal is weak. It was working fine and now it's not. How do I troubleshoot this?
Very helpful...
Glad it was helpful!
Thanks for the video! I'm wondering if you may be able to help me out with two issues...I have a PrismStation 5AC that I want to connect to two Loco 5AC. Currently it's set to Access Point on, PtP mode on. It's connected to a one of the Loco 5ACs and works well. The 1st Loco is set to Access Point off and PtP on. But, I can't get the second one to connect even though it found the SSID. I'm assuming that this is because I need to change the PrismStation to PtP off? If that is the issue, do I then set both Locos to OFF for AP & PtP?
Second issue is that I can't get the devices on the UISP Domain (says unreachable). I did make a domain and it did work until I changed the devices to 192.168.10.x instead of 192.168.1.x. Should they all be back on 1.x?
Thanks in advance!
Hello, do I need an ethernet cord for router at Building B? Trying to figure out how to set that final step up
dBm = decibel mili watt.
Amount of power in decibel scale.
Thank you for confirming. Question: If you have higher dBM, does that mean WiFi can go further distance ?
Great video! I do have a question. I've set up the point to multipoint and it's been working for about 3 years. AP-2 stations. Each station has a router. But recently, after upgrading the firmware of the NSM5, one of the routers stopped working. It's a TP Link Archer 5. After trying to work with it for a few hours, I called TP Link and they only thing they could figure out was to make the router an access point when previously, I had it set up with its own IP. The internet works from the NSM5 and the POE injector, but not through the ARCHER unless it's an AP. Any idea what happened here?
Did you try to reset Tp Link Router ?
Thank
what is the cost of one equipment
Thanks!
Thanks Tom !!! Appreciate it
Dear UberGeeks, you mention you are connecting these about a mile apart. What is the real world speed you are achieving between your links?
Not accurate. But I always cut them in half. Meaning, if my feed is coming at 100mbps. I would assume my Station B & C are getting 50mbps
What if the B and C building are far from the A what number will i put in the Dbm
Will this work on the Starlink system. I have the eithernet cable. Can I just follow ur instructions and plug the eithernet cable from the Starlink accordingly. B
How to do repeater configuration ?
Can 2 building which mean as access point ( B & C ) send data to 1 building as a station sir ?
in B i have one NVR within 30 ip camera cctv , same situation in C building like B building.
I want to control / manage them in A Building.
Thanks sir
Sorry for my bad english
How would it work for the purpose of a cctv system with more then 5 points?
Thank you so much 🙏 , is ip address should be same for all of them? Is it possiple to set AP on 192.168.1.20 and clients on 192.168.1.21 ?
Pls how can I correct the situation that say's Mac address not associated and it reads 0 signal
thank you sir
You are welcome. Glad the video helped.
Can u set the internet speed limit?
Is it possible if I connect M2 to the secondary port of the M5 will I get internet when the mobile phones try to connect
Hi I have three locations to install IP cameras A B C, (200 feet appart) I have internet at point B. Installing cameras at A & C with no internet connection, A B C are on a straight line and B is in the middle, I cannot just use nanostation at all three locations because of the wide angle, can I use omni at B and 2 nanostations at A & C?
Having IPV6 enabled, will there be no issues?
I am Presently doing this with Starlink Mesh system. Their rent includes 1/3 cost of Internet. We all stream 8K .
Please how did it go? I’m about doing such connections.
good job
You are welcome. Glad the video helped.
A nanostation is given wifi when select that AP can we use the ssid as a hello or we want to connect router for it?
I cant find these on the Unifi website, are these still availible?
Can i used this méthode in peo camra