Turbo Install Guide || Honda Acura B18 B20 D16 D15 Etc

แชร์
ฝัง
  • เผยแพร่เมื่อ 4 ก.พ. 2025

ความคิดเห็น • 149

  • @89hybrid88
    @89hybrid88 6 ปีที่แล้ว +61

    Your explanation of how toos is always on point. Very well done as expected.

    • @SPTuning
      @SPTuning  6 ปีที่แล้ว +1

      Thank you 🙏🙏

    • @89hybrid88
      @89hybrid88 6 ปีที่แล้ว

      Oh and tell Yost to sell that Juke and buy a Honda 😆

    • @SPTuning
      @SPTuning  6 ปีที่แล้ว +1

      Hahaha hes actually got a badass accord ! Soon itll be out

    • @garyphloyngam7148
      @garyphloyngam7148 4 ปีที่แล้ว

      Yes I agree man well done on explaining everything bro

    • @frias2287
      @frias2287 2 ปีที่แล้ว +1

      Nice one bro i have eg6 turbo swap H2BA7

  • @JR.WITH.THEHATCH
    @JR.WITH.THEHATCH 9 หลายเดือนก่อน +2

    5 years later and your still helping 💪🏽💪🏽best video exactly what I was looking for for 🐐🐐

  • @Sloppyjalopy123
    @Sloppyjalopy123 6 ปีที่แล้ว +37

    Right stuff gasket maker is the best stuff on the planet, never leaks, and can be put right back in service in a hour. Also, push lock hose is awesome to work with. It will work for anything up to 300psi. Coolant, oil, fuel, air, e85, anything.... Great informative content, nice work.

  • @MoveMint.est85
    @MoveMint.est85 3 ปีที่แล้ว +1

    To this day I can still keep watching a rewatching this video one of thee best.💪💪💪

  • @crazy8boy145
    @crazy8boy145 3 ปีที่แล้ว

    The one handed filming is highly respected. As people like to explain with words on a video making website nowadays lmfaoo

  • @imalec
    @imalec 6 ปีที่แล้ว +8

    You are an excellent communicator, I really enjoyed this video.

  • @tanyayalonso
    @tanyayalonso 6 ปีที่แล้ว +13

    If you cut the lower portion of the crash bar where you mounted the intercooler, you can make more room to tuck the intercooler up higher so it doesn’t sit so low. It will also allow you to put the bumper with minor modifications and keep the front webbing for the incognito look.

  • @ThatStoneGuy13
    @ThatStoneGuy13 6 ปีที่แล้ว +9

    I waited the full 24 hours when I did my oil pan totally worth it!

  • @BESTNOODLEREVIEWS
    @BESTNOODLEREVIEWS 6 ปีที่แล้ว +31

    Very descriptive and informative video

  • @policeh956
    @policeh956 ปีที่แล้ว +1

    Hey. This is a clean and clear video. Great job. Thanks 👍

  • @FutureBoostedMedia
    @FutureBoostedMedia 3 ปีที่แล้ว +1

    Loved this. Going to be ordering my kit soon and I wanted to make sure I was prepared.

  • @tristanlafferty2587
    @tristanlafferty2587 2 ปีที่แล้ว +1

    Nice video, definitely helpful. I work on big trucks and equipment but love big hp cars so I’ve been building a 97 coupe I’ve got 2 JDM high compression B20B’s one stock and one fully built and one B16A2 head. But the pieces on the intercooler typically in fabrication terms is referred to as a tab from the guys I’ve known

  • @nandoscustomdiecast368
    @nandoscustomdiecast368 ปีที่แล้ว

    It has come a long way 👌

  • @robgonzalez6723
    @robgonzalez6723 6 ปีที่แล้ว +10

    You get more oil pressure from the sending unit port instead of the oil filter side
    Plus it’s cleaner oil

  • @Trenchboi69
    @Trenchboi69 5 ปีที่แล้ว

    I boosted my Z6 and lost all oil pressure because i used another oil pan! Be sure to use ORIGINAL oil pan guys makes a difference .. good video

  • @jasonjones1114
    @jasonjones1114 4 ปีที่แล้ว

    Nice vid, dig the don't be afraid to modify for aftermarket vibe. Lots of people start the reassembly hit a misfit and freak out, lol. Appreciate the opinion on which style/ model of oil supply fitment to go with. Great job, keep it up. See ya on th enext vid.

  • @styskdrpded5040
    @styskdrpded5040 6 ปีที่แล้ว +15

    Shouldn't the turbo inlet be on driver side of the engine bay, maybe that's why the charge piping didn't fit.

  • @hilltribefamily
    @hilltribefamily ปีที่แล้ว

    Awesome work bro

  • @miketavenermedia7853
    @miketavenermedia7853 6 ปีที่แล้ว +4

    Great video and very informative! I am loving this channel!

  • @therobshow820
    @therobshow820 6 ปีที่แล้ว +3

    Appreciate these videos bro! Thank you

  • @MrSiDeWaYs240
    @MrSiDeWaYs240 6 ปีที่แล้ว +2

    Need more videos !! Keep em comin !

  • @johnathanburley721
    @johnathanburley721 5 ปีที่แล้ว +1

    The turbos backwards exhaust housing supose to be on pass side of the car that would allow you plenty room for the filter man but great video

  • @tegnando2697
    @tegnando2697 6 ปีที่แล้ว

    Awesome video bro I'm liking those slicks

  • @Gbodyteggy1208
    @Gbodyteggy1208 6 ปีที่แล้ว

    This dude is dope and i learned some new lol but turbo is my next build.. k20

  • @vinceh6558
    @vinceh6558 4 ปีที่แล้ว

    honestly best video ive seen on this thank you bro

  • @bobthompson4319
    @bobthompson4319 5 ปีที่แล้ว

    In Death Valley California Yuma Arizona Phoenix Arizona AC in a car is it a must I wish I didn't live in Phoenix so I didn't need to have AC. Cars made in the 80s and early 90s that are in Phoenix most have ac that works still. lol. Good thing they make AC and power steering friendly turbo kits for the Integra

  • @Escalofrios29
    @Escalofrios29 4 ปีที่แล้ว

    Hilarious, the car outside looks horrible but the engine bay looks really clean, props for that

  • @robdee2924
    @robdee2924 4 ปีที่แล้ว

    Awesome video! Very informative.

  • @mattm2411
    @mattm2411 6 ปีที่แล้ว +1

    fuck gotta go back to work will continue watching right after. sick vid

  • @the_kroe5509
    @the_kroe5509 6 ปีที่แล้ว +1

    you put the inside nut for the return on backwards that crush washer isnt going to crush evenly. if you look one side is curved and one side is flat. flat side for crush side.

  • @bsbuilt
    @bsbuilt 6 ปีที่แล้ว +2

    Your integra looks mean with that wheel setup.

  • @juansanchez4223
    @juansanchez4223 6 ปีที่แล้ว +2

    @sptunning where u install the turbowasgate vacuum lines ???

  • @easyrodriguez6802
    @easyrodriguez6802 2 ปีที่แล้ว

    Everything was on point.

  • @mrme9517
    @mrme9517 2 ปีที่แล้ว

    Nice work but with oil priming u want to crank until the oil light turns off before actually starting it that wasn't enough cranks honestly but if it works it works lol

  • @bmpe9322
    @bmpe9322 6 ปีที่แล้ว +16

    Oil return in the sump pan seems a bit low.

  • @gates762x6
    @gates762x6 7 หลายเดือนก่อน

    I’m swapping engine/tranny to a JDM type R b18c and go auto works turbo kit. Is it easiest to install the turbo kit or some of it on the engine before I drop it in or does it matter? Thanks

  • @benjaminhoger6427
    @benjaminhoger6427 2 ปีที่แล้ว

    Nice work what part FL you in

  • @kylelove927
    @kylelove927 5 ปีที่แล้ว +5

    Bro! What did you drill the oil pan with? A pair scissors??? Lol 😳😳😳

  • @BulliKid
    @BulliKid 5 ปีที่แล้ว

    Why are all these eBay kits external waste gate? Wouldn’t it be easier to mount and simpler with a internal wastegate kit? And do you think these eBay kits are to big. Usually spool up later.

  • @BlackyBrownDestruction9337
    @BlackyBrownDestruction9337 6 ปีที่แล้ว +1

    Planning on $670 cxracing turbo kit with ac on my ls swap ek with fmu cus Hondas make a shit load of power with lil boost.

  • @aaleexsaalaazaar
    @aaleexsaalaazaar 6 ปีที่แล้ว +4

    What's the link for this turbo kit?

  • @k1ortia
    @k1ortia 6 ปีที่แล้ว

    awesome...can we see a budget sleeper build? love sleepers

  • @moe4204
    @moe4204 2 ปีที่แล้ว

    Great video very well explained

  • @toki89666
    @toki89666 6 ปีที่แล้ว +5

    SP Tuning I have been searching for all the AC lines/ Dryer/ and condenser to add to my H22 EG for quite a while. Maybe we could PM about these parts? DC A/C stuff should work on eg i hope.

    • @toki89666
      @toki89666 6 ปีที่แล้ว

      Pre 2000s Hondas are very difficult to find in yards near me in Kentucky. So it would be amazing if you could sell me these parts if they are still laying around.

  • @BoostedDilly
    @BoostedDilly 5 ปีที่แล้ว +1

    Sweet! You gained a new sub!

  • @EnthusiastOwned
    @EnthusiastOwned 3 ปีที่แล้ว

    What color would u say that integra is ? Obviously red but what shade ? It looks sick

  • @decembersweetheart
    @decembersweetheart 5 ปีที่แล้ว +6

    Hey buddy I'm about to start a build
    Anyway you could drop a entire list of what's needed for a turbo set up

    • @hotboyola
      @hotboyola 5 ปีที่แล้ว

      Nicole Dunlap
      A bottom end - bearings, pistons, rods, sleeves(if necessary)
      An eBay kit should include a manifold, turbine, inter cooler and piping

  • @z0mbi3kill3r89
    @z0mbi3kill3r89 4 ปีที่แล้ว

    I love how you explained everything. May I ask what part of florida are you located?

    • @jayprime6985
      @jayprime6985 4 ปีที่แล้ว

      yea i need to know bc i wanna boost my teggy too

  • @CesarsCarCorner
    @CesarsCarCorner 6 ปีที่แล้ว +2

    Could you provided me a link on which kit was used? Thanks!

  • @Isaiaha400
    @Isaiaha400 6 ปีที่แล้ว +1

    Beautiful video

  • @erpxs
    @erpxs ปีที่แล้ว

    any way you can link the turbo kit you used?

  • @AJSi-kj1ck
    @AJSi-kj1ck 6 ปีที่แล้ว +1

    Good video bro keep it up

  • @homerthompson6028
    @homerthompson6028 6 ปีที่แล้ว

    For the oil send unit fitting, do you only use the tape on the side that screws into the block do you tape up the oil sender side and feed line side as well?

  • @drinkthath2o349
    @drinkthath2o349 3 ปีที่แล้ว

    can i just put a turbo on my engine like he/you did or do i need to do things to my engine first ?

  • @brandonvalerio3157
    @brandonvalerio3157 6 ปีที่แล้ว +1

    What kind of screw is he using for the oil pan

  • @Alexis-jw7ov
    @Alexis-jw7ov 3 ปีที่แล้ว

    Hey brother I’ve watched this video multiple to study it, I’m now in the right position to turbo my integra, I haven’t bought anything yet because I feel Iike there’s something I should do before throwing a turbo kit on my engine, any help ? I heard a compression test ? Anything I’d need to upgrade first ? Or test out ??

  • @AngelGonzalez-jy8xk
    @AngelGonzalez-jy8xk 4 ปีที่แล้ว +1

    Can you help me out? I got a b18b1 Acura integra I wanna boost it but what turbo kit or parts should I order first to focus on it so it doesn’t blow

    • @rebel9976
      @rebel9976 4 ปีที่แล้ว

      did it figure it out thinking about picking up one just like uours

  • @BulliKid
    @BulliKid 5 ปีที่แล้ว

    How is this kit holding up?

  • @axelsilvajr
    @axelsilvajr 4 ปีที่แล้ว

    Can i get a link to the kit? Tryna turbo mine and i cant decide which one is the best

  • @vfwm4879
    @vfwm4879 5 ปีที่แล้ว

    do you need injectors or anything else to even get use from the turbo ?

  • @JairSantiagovolley
    @JairSantiagovolley 6 ปีที่แล้ว +1

    Where did you get your spark plug wires and distributor bro?

  • @tdkrumpets9381
    @tdkrumpets9381 6 ปีที่แล้ว +1

    You need a tripod and a actual camera but very good video man

  • @yarrabarcreek5708
    @yarrabarcreek5708 5 ปีที่แล้ว

    So what did u do for the brake booster vac hose normally on the intake manifold?

  • @colinr6912
    @colinr6912 5 ปีที่แล้ว +1

    Do I need to buy a new belt ?

  • @dustinmiller1698
    @dustinmiller1698 6 ปีที่แล้ว

    Hey i drive a 92 civic wit a d15b7 in it i want to boost it wit a turbo and i know theres more to it then just the turbo kit and hondata to tune it but wat else would you suggest for it to be a good sleeper. Thanks for the help

  • @donovanwarner9384
    @donovanwarner9384 5 ปีที่แล้ว +1

    Would this work with the 4 door intregra???

    • @Z3R0__Gaming1
      @Z3R0__Gaming1 5 ปีที่แล้ว

      Yep. As long as you got a motor and a turbo😂

  • @st0k_a90
    @st0k_a90 6 ปีที่แล้ว +1

    You have the link to this kit papi ?

  • @Ehren1337
    @Ehren1337 6 ปีที่แล้ว

    itll make around 215-225hp 10psi on 93 pump street tune though. around 15psi probably make 255-265hp. unless its the b20b itll make around 250hp 10psi on 93

    • @ACHEIZM
      @ACHEIZM 5 ปีที่แล้ว

      If he goes E85 hell do 300-330 whp at 10-12lbs with 900cc injectors

  • @K20Val
    @K20Val 6 ปีที่แล้ว +4

    This isn’t for a turbo kit but if I were to modify the ac and push it forward could I have ac

  • @The_Redkween
    @The_Redkween 5 ปีที่แล้ว

    Thread tape is to lubricate threads, not seal them. Pipe threading is tapered, so it seals itself. The thread tape is simply used to get you tightened up without seizing.

  • @BucksSuperStereoWorld
    @BucksSuperStereoWorld 5 ปีที่แล้ว +1

    So, let me ask you a question, when you first started modifying your Integra and decided to go turbo, how did you start? Meaning, how did you first get into turbocharging your Honda? I bought a 97 EJ8 Civic coupe for $1000 off of a 19 year old and it had a JDM D15B VTEC block with a Y7 head (yeah, I know, but he didn't), the first thing I did was get a Z6 head, head studs, Cometic head gasket, new timing belt, water pump, tensioner, and I drove it like that for about a month before I installed an eBay turbo manifold just like that one, but it had a DSM T25 flange on it and it came with a perfectly good T25 turbo. I put that on and it spooled at like 2000 RPM, so it was about worthless, so I bought an Evo III big 16G turbo and it felt weak too, and that's when I bought an entirely new eBay kit and installed it. It was alot of fun on 8 psi, but I needed more torque, so I went with a B18B1. Now I have a fully built LSVTEC with a Garrett GT3582R dual ball bearing turbo that makes 588 whp. It's scary fast for me and I love it.

  • @jaymills85
    @jaymills85 6 ปีที่แล้ว

    What did you do about that hole in the valve cover?

  • @davidanguiano5206
    @davidanguiano5206 4 ปีที่แล้ว

    Did you run it with a stock fuel pump ?

  • @rhonnelagatep518
    @rhonnelagatep518 6 ปีที่แล้ว

    did the customer run arp headstuds?

  • @elliotmelchor4289
    @elliotmelchor4289 3 ปีที่แล้ว

    Is it better to get a more expensive kit turbo than just getting an eBay one?

    • @Tainadotaisune
      @Tainadotaisune 2 ปีที่แล้ว

      Always. You pay what you get for. But budget only allows for so much always. do what you can afford, but do it right

  • @demisniper569
    @demisniper569 ปีที่แล้ว

    Studs wit nuts 😭👌

  • @kkkevv224
    @kkkevv224 6 ปีที่แล้ว +4

    waiting patiently for crv build...

  • @boogiewoogie369
    @boogiewoogie369 6 ปีที่แล้ว

    Can I turbo my Sohc 89 civic? Its an automatic. Unfortunatley. It has 120,000miles on it. Also will i have to upgrade internals of the engine at all? I dont want to squeeze 400 horses out of it. I just want it to hit at least 150-200 horses. Its currently sitting at 92hp stock.

    • @ACHEIZM
      @ACHEIZM 5 ปีที่แล้ว

      You can turbo anything, just run 470 injectors a small t3/t4 turbo and nothing more than 5-7 psi plus get a decent tune..

  • @jaymills85
    @jaymills85 6 ปีที่แล้ว

    Yo Pablo I wonna run that, you got to setup up a race we got the same setup. I just got way more miles wonna see how my car will hold up.

  • @mattm2411
    @mattm2411 6 ปีที่แล้ว

    Would love to see some pulls from this car

  • @aruehcare7372
    @aruehcare7372 5 ปีที่แล้ว

    Can you turbo charge the CRV and keep the all wheel drive

    • @a-team65
      @a-team65 5 ปีที่แล้ว

      aru ehcare yes. Been done quite a few times.

  • @estebanmorris5636
    @estebanmorris5636 5 ปีที่แล้ว

    How may I get my car done by this guy?

  • @KILLAKEEESH
    @KILLAKEEESH 3 ปีที่แล้ว

    Has it blown yet!

  • @noureldin4372
    @noureldin4372 5 ปีที่แล้ว

    How many miles does an engine has to have for it to install a turbo

  • @jovonnirios9231
    @jovonnirios9231 4 ปีที่แล้ว

    What injectors do u need?

  • @RuzzYoutube
    @RuzzYoutube 5 ปีที่แล้ว

    Can i install turbo on my n.a engine..kia forte koup 1.6l dohc?

  • @leesanchez2096
    @leesanchez2096 3 ปีที่แล้ว

    Wat kinda turbo is it

  • @waynesgarage6845
    @waynesgarage6845 6 ปีที่แล้ว +1

    Great vid

  • @DjNileOne
    @DjNileOne 6 ปีที่แล้ว +1

    Block guard and make 400? my teg made 417hp with over 250k on the block..

    • @gj7783
      @gj7783 6 ปีที่แล้ว

      Nile_One sure it did

    • @LILLYCOSTIDO
      @LILLYCOSTIDO 6 ปีที่แล้ว

      Haha

    • @blakeroyston3069
      @blakeroyston3069 6 ปีที่แล้ว

      Block guard are garbage css is the wave

  • @righty-tightybuilt548
    @righty-tightybuilt548 4 ปีที่แล้ว

    Hey bro so nobody can seem to tell me all the parts I need to turbo my integra gsr... lol.. im buying a ebay turbo kit what else do I all need to be able to install it then drive it.. i want to be able to keep injectors and ecu stock and without a tune.. i have a chipped obd1 p28 in my car already and aem fuel rail and regulator blox intake manifold pls get at me bro every other channel seems to be to good for the viewers to reply back lol

  • @blakejones2411
    @blakejones2411 2 ปีที่แล้ว

    Should have rtv that oil pan bung

  • @jonathanaban3844
    @jonathanaban3844 5 ปีที่แล้ว

    will i still be able to have a A/C even with a turbo kit?

    • @CarterHansonlb
      @CarterHansonlb 5 ปีที่แล้ว

      Jonathan Aban most likely not it’s a tight squeeze. I may be wrong but everyone I know with turbo integras, don’t have the A/C because of how tight it is. Its worth losing the A/C for a turbo in my opinion though haha.

  • @novaorbitdragon
    @novaorbitdragon 5 ปีที่แล้ว

    One of the cylinders sounds like its low on compression

    • @truleysaid3351
      @truleysaid3351 5 ปีที่แล้ว

      Compression test it if compression is good check fuel pressure could be a weak or failing injector or fuel leak somewhere just dealt with a similar problem where I had a cylinder not firing at all with a rebuilt motor

  • @458237
    @458237 6 ปีที่แล้ว

    eBay turbo kit link plz?

  • @da9ej1eg99
    @da9ej1eg99 5 ปีที่แล้ว

    Same process for da9

  • @oussamabenkhedda2658
    @oussamabenkhedda2658 6 ปีที่แล้ว

    Good job

  • @TheRealBoeJiden
    @TheRealBoeJiden 5 ปีที่แล้ว +1

    Fit his tires to how he desires... *bars*

  • @boomerphysics778
    @boomerphysics778 3 ปีที่แล้ว

    Has anyone got an eBay link to buy it??

  • @bigjuice8784
    @bigjuice8784 4 ปีที่แล้ว

    Link to turbo kit?

  • @Runescapian1996
    @Runescapian1996 5 ปีที่แล้ว

    Link for this kit?