One thing that sets your videos apart from others is the fact that you supply a link to every single thing you use in the description! That has helped me out so much with finding things I need to make my build easier!
Thank you for sharing your knowledge and helping me with my dirtbike and my motorcycle. That is so sweet how you can teach everyone who is passionate about riding and love to work on their own bikes. You are talented.
Hey man, I need to buy new plastics for my 2001 CR125, is there a newer year i can buy or should i just stick with the same year? UFO? I know you mentioned this before but i cant seem to find it. Thanks in advance! Rippin!
Hey man you should always rotate an engine towards the front the bike, you could mess up the timing and put yourself into more work. Never fun! Keep it up tho, you make the best dirt bike wrenching vids out there!!🤘🏻
I just did my engine covers on my bike but soon as I started torque down the bolts right where the bolts hit the powder coat the powder coat cracked off. I wonder if the media is old in the blast cabinet I used at work because it never gets used anymore..
I got a Eastwood hot coat powder coating kit and was planning on doing mostly the same parts on my 2019 klx110L you always seem to come out with just the right videos at the right time!! Thanks!!! Lol....looks so good! Came out great, I got wet mirror finish black, I did the shifter so far cant stop riding it long enough lol I've changed it completely over from stock already tho cant wait to order the graphics kit tho, I was also thinking about going with teal on some smaller parts to help match the black and teal graphics anyways I'm done rambling, seems like I'm the only one into this stuff around here lol. Cant wait to see the CR250,!! I'm sure your tired of hearing that by now too lol anyways keep it pryme!!
Cameron, I’ve read a few reports that PC hold the heat longer than bare metal, have you read or experienced that? Concerns? Is that also the case with Cerakote?
Could you talk a bit about some of the different "girlfriend" bikes that are available like 80-110cc or possibly even trials bikes that are lower & lighter. Cameron Can Cook!
Hi there bro hope your keeping well mate been watching your vids for about 8 months now really impressed with what you do and the quality of your vids mate sounds bad but only just found out how to like and subscribe so sorry I’ve not been able to support u sooner bro I’ve just started making some vids my self and I’ve realised how much harder it is than it looks so well done mate god bless and I’ll be liking all your new content mate
don't forget to put oil back in
you asked us to remind you :)
One thing that sets your videos apart from others is the fact that you supply a link to every single thing you use in the description! That has helped me out so much with finding things I need to make my build easier!
Happy I could help man! Thanks for watching
I wish you had done those triple clamps with the same red as the spring,,
had a feeling the frame and swing arm were next. great video
Thank you for sharing your knowledge and helping me with my dirtbike and my motorcycle. That is so sweet how you can teach everyone who is passionate about riding and love to work on their own bikes. You are talented.
This man takes pride in his work and takes no short cuts ever
Ryandean1 yes. It’s all in the details 👍🏼
Except for putting oil back in it. But hey. We're all human.
That lil XR is lookin'💯🔥 Keep up the grind, it's appreciated 💯👊🏻
13:13 WHAT A CATCH
Matty Mccolgan yo
Cams Custom Cycles never lets you down! Tuff looking bike for the young lady. Can't wait for the next one. Thanks
Absolutely sick loving the Project! Keep up the good work
Awesome fun project!! Attention to detail is what sets any project apart.
Paint the Honda letters white to make them pop!
hahaha once you go black you never go back! That's crazy how the valves have such a small tolerance.
That catch of the bars falling 👌
That frame and swing arm need some powder coat. Good job so far 👍👍
Sick video Cameron I can already tell the xr is going to be bad ass
Will that affect the engine cooling at all ?
Bro that was a great catch(handlebars) looks great man
And also that handlebar is looking a little bit rusty, It will be a good idea to replace it with an aluminium one 😁 keep it pryme 👌🏼
Nice bro can't wait for the next video seeing you both work together on the project will be great to see
Love your work man can't wait till I have the financial backing to take on some nice projects myself 💞
Hey man, I need to buy new plastics for my 2001 CR125, is there a newer year i can buy or should i just stick with the same year? UFO? I know you mentioned this before but i cant seem to find it. Thanks in advance! Rippin!
It’d look sick with chrome bolts on the cerakote black
Yet another master piece great job man🤙
looking Pryme young man! shout out from the west side of the state...
How hard is it to powder coat the entire outside of the engine? 10x the work?
Those cases look OEM, bro! gotta do this on my 200X...
Wow because this is very good work! Congrats and keep it up.
You my friend are an absolute beast!!! I'm in love with that little bike, keep it up 👌🏻
@jesus jones make a stop on Mexico to pick me up, and I'll help you out 😜😄
do you have to put the gasket grease on both surfaces like on the engine covers and on the clutch case?
Unknown Drifter yeah it put it on both sides
Hey man you should always rotate an engine towards the front the bike, you could mess up the timing and put yourself into more work. Never fun!
Keep it up tho, you make the best dirt bike wrenching vids out there!!🤘🏻
Do u gotta worry about it getting hot I know it's baked on but my bike runs 215° idk if it will make it soft.
I just did my engine covers on my bike but soon as I started torque down the bolts right where the bolts hit the powder coat the powder coat cracked off. I wonder if the media is old in the blast cabinet I used at work because it never gets used anymore..
Oh that's cool, but WHEN ARE YOU RIDING
Could you do a bottom end rebuild no one on TH-cam has a video for this bike🙏🏼
I got a Eastwood hot coat powder coating kit and was planning on doing mostly the same parts on my 2019 klx110L you always seem to come out with just the right videos at the right time!! Thanks!!! Lol....looks so good! Came out great, I got wet mirror finish black, I did the shifter so far cant stop riding it long enough lol I've changed it completely over from stock already tho cant wait to order the graphics kit tho, I was also thinking about going with teal on some smaller parts to help match the black and teal graphics anyways I'm done rambling, seems like I'm the only one into this stuff around here lol. Cant wait to see the CR250,!! I'm sure your tired of hearing that by now too lol anyways keep it pryme!!
Nice job on the honey do list! Lol,nice work Cam.
Honey do bike! Looks sick! Cam Strong!
That bike is gonna be sick
8:45 Nice.
Looking Good!
Man... what I'd give to have a shop setup like that lol. One day :)
Sweet I know it would be over the top but what about coating the engine side over bolt heads in burnt bronze?
Cameron, I’ve read a few reports that PC hold the heat longer than bare metal, have you read or experienced that? Concerns? Is that also the case with Cerakote?
Looks dope!!! Nice job man
Need more scotch bright pads playa coming your way
Bro your shipping is fast high 5 my man
Should i remove the oil seal and bearing for powder coating the block engine? It will be damaged? Also if i want to powder coating shock absorber?
Nice. When buying a used bike I always look at the case covers to see how much the bike has been rode 😆.
Well done.
Кэмерон спасибо за качественный контент!!!
Excellent work brooo!!! thxs again!!!!
JB weld the old Ignition cover ?
You take this thing apart a lot 😂😂
Better than new
is the valve clearence the same spec as the xr 100? great video
Thanks! Yes same spec
looks great!
Beautiful work as always cam if your ever in so cal hit me up you always have friends down hear
😎 best thing on you tube as always keep em coming cam
When you put grease on the gasket surface. Do you put it on both sides, or one side only?
I put it on both sides
Hey Cameron how much was it to resleave your cylinder on the 250?
Awesome new look on the bike, when are you going to recoat the frame and swing arm? Or aint you going to do them
he did mention about tearing the bike apart and powder coating the frame and swing arm at the end of the video ;)
@@syedm9654 i must have missed it, my house was abit noisy i heard him say about the swing arm
@@braydengraymx4219 hahah I can't wait for the next vid anyway
@@syedm9654 yeah same loving these vids as always
Could you talk a bit about some of the different "girlfriend" bikes that are available like 80-110cc or possibly even trials bikes that are lower & lighter. Cameron Can Cook!
Should open a side business for powder coating , i want my 4 wheeler frame and swing arm painted
@@julienvidegain5480 i was saying he should not me lol i have no experience
Can't wait for the cr250😁😁
That beard is growing in fast
Cameron, how do you decide when to powder coat and when to Cerakote?
I do powdercoat when there's no tolerances to worry about or I need a thicker finish. Cerakote for things with tight tolerances like triple clamps
For durability is Powder coat preferred? Is cerakote likely to be worn through easily?
Really hoping you do a CR500 AF Swap next!
Looking sweet
+5 horse power
Hi there bro hope your keeping well mate been watching your vids for about 8 months now really impressed with what you do and the quality of your vids mate sounds bad but only just found out how to like and subscribe so sorry I’ve not been able to support u sooner bro I’ve just started making some vids my self and I’ve realised how much harder it is than it looks so well done mate god bless and I’ll be liking all your new content mate
This is a man who knows what the girls like, attention to detail.
Hey Cameron, really love the videos!
I’m wondering what air compressor you use for your blast cabinet and what your cfm looks like?
Untamed Society Thanks! I’m using a Ingersoll Rand 80 gallon. I believe it’s 18cfm
Dont make it look too pretty, she won’t want to ride it haha. Wonderful work man! 🤘🏻
good job love your videos can't wait for cr 250 :D
Nice!!! Keep up the great work! 👍🏼
Love the bike
When are you gonna do plastics and that seat? Love the vids bro, Keep it up! Glad your healed up ❤️ F cancer
Awesomeness
Do you have a link for that respirator?
Yes, it's in the description
How do you not loose bolts ever ??🤔
Sweet video, keep em coming...!
You like to mount things just to dismount them again huh 😄
What masking tape gets used
Hey Dude don’t forget the OIL
Cameron you should let people give you their bikes and a fat ton of money for you to factory them up!!
when Honda parts are made does Honda spray paint them or powder coat them?
Most of the parts are sprayed with a urethane based paint out of a gun
@@CameronNiemela surely it's not as durable as powdercoat?
What compressor are you using to sandblast?
Ingersoll 80 gallon 5hp
Plz build an ATC 250r
You should of done the head the shiny red
bro, this bike will look like a 20,000 dollar bike!!!! great job!!!
How much is a cost add that I put on
Cams kitchen 😂
Hard to critique your work but, could have polished the side cover bolts. All good as usual.
Harsh but fare
White frame :)
Wish you would of done it red
What size bike should i get im over 5'5 and about 130lbs and 14 what size bike should i start looking for
Yz 125 or kx 125 or any 2 stroke 125
125 2 stroke
Cam... you must really love the girl! 👸💓
You should put cr80 forks and triple clamps on it at some time, they make a huge difference, love the videos, keep up the amazing work🤘
You should get her a kx100
Love the STONE BLACK color. Love this channel! You always go the extra mile!
Keep this kind of content 😉👌
Im always wondering is there anything you don't know about dirtbikes
I don't know how to finish them hahaha