Good video, dude. Informative and clear. Seems like it progresses from idle to main very smoothly. I'm considering a similar setup for my twin cam mini build. The sound is nothing short of erotic.
Hanging idle for a split sec. after throttle ,that generally is a sign that there is more aire than fuel entering the combustion chamber. Another thing is. Id get a choke hooked up to those carbs. If you have any questions about tuning the carbs shoot me a message
Yeah, 4 36mm carbs is overkill. R1 carbs are overkill. These would be better than the stock intake even, people on vwvortex often don't know what they're talking about.
I’m doing the bike carb swap on my mk3 right now, really enjoyed this and its sold me on buying 600R carbs and saving the time waiting for the next r1 deal. If I want the larger carb I can always “upgrade” to them later right?
looks sick man! I have some experience with carbureted motorcycles so I really want to give this a try on my 1976 Opel Kadett, the car already has a carburetor setup, so dont need to mess with fuel pumps and stuff I think
kayrab9000, how are you doing man! I have an '84 Scirocco with an 2.0l 8v OBD2 swap, I'm planning on converting it to carbs. I wonder if you have a check list or something similar of the conversion process you had to go. thanks!
Dont those carbs need back pressure? Pretty sure i had a similar set on a kawasaki ex500 engine in a quad. You can compensate with upping the jetting but I dont think its ever the same again.
Bottom Gear same carbs on my gsxr and they only require a air box factory due to jetting. Now once you change exhaust or air pods it changes how they function and don’t like it until you go way bigger on the fuel jets to make up for the air then it makes a already monster bike a straight animal. On a car they work the same off of intake suction vacuum so get your fuel ect
hey im the one who built this car(friends youtube page) and the carbs do have a choke but its sized for a 600cc engine stock and i cant seem to resize it. Unlike a traditional carburator i.e. holly, edelbrock on a v6/v8, these bike carbs have no accelerator pump. So below 60*f the airs too dense and there isnt enough fuel to make a solid combustion. Im thinking about remedying this issue with a block heater; warmer engine on first start, warmer oil, easier for starter to spin a million times, quick start up in colder weather. Anything at or above 65*f this thing has no problems starting.
kayrab9000 take a look at some of my videos if you can my car is a Honda prelude I’m trying to put bike carbs in it the car originally came with duel carbs but now it will have 4 I don’t have a return because the car never had one to begin with
What engine is that? Cos the intake/carbs are on the front of the head, I know the cars from this era the intake is on the rear of the head, unless you guys in the America's had a different 8v engine to us here in europe. Nice video and well done to you and your father for such a good build.
similar setup in my stock 4age smallport... but in 45 WEBERs... even if they re still jeted set up for 2 litre engines or bigger.... i see same torque same places .. in 3.000rpm clears the misses and you can full throttle it to see max power until 5.500/6000 rpm.. i keep power a bit higher cause 4 ag's have more light internals!!! if you play wise with pneymatic and the distributor you might see better work.. watch out with em if you dont want to burn your engine!!! run it rich for its safety !!!!!
Looking to carb swap my 2001 2.0 cabrio. Ill probably do what driving 4 answers did and install a motorcycle lp fuel pump. Long term i also want to mount the engine longitudinally and make a rwd setup, run it in the 24 hrs of lemons.
@@Onceuponajuan it would depend on what carbs you get. So say you were stealing carbs from a motorcycle for your 2.2L engine. You need a way to compare them apples to apples. My idea is you need equivalent airflow rate. So for a 1000cc/1L bike engine for example you have 4 carbs, so 250cc per carb. Then find the target rpm (11000 rpm for example on some bike). Every 4 strokes = 2 rotations. Every 2 rotations = 1 intake stroke of 250cc per carb. So at 11000 rpm you would be making 250cc of flow at 5500 "rpm". If you follow the unit conversion and then convert to cfm (cubic feet/min) its about 50 cfm per carb. In order to be viable in acar without modification you need a similar cfm. For a 2.2L at 1 carb per cylinder at 4000rpm you are about 40cfm. At 5000rpm it is better at about 50cfm. The point where the cfms (air flow rate) match are where you know the carb will work as intended. Hope this helps.
@@Onceuponajuan if thats the case you need to decide your tuning range/target rpm. you need to calculate the cfm for each variation based on the cylinder displacement. Find truck engine displacement, call that A1. Find target rpm of truck engine B1. Airflow is then dV1=(A1/#cylinders)*(B1/2). If you calculated using liters and rpm thats ok but make sure the units of dV2 are the same as dV1. dV2 is for the carburetor host (bike). So if the truck had a 3.4L 6 cylinder engine of course 50cfm is not necessarily the airflow at 5000rpm. Say we had a 4.4L engine instead of 2.2L from before. You would double your flow at any rpm so at the same rpm as the previous example you would now need 2 carbs per cylinder
![[SUB] 베몬이 교관님 멘탈을 탕탕 후루후루~٩(๑❛ᴗ❛๑)۶ FOREVER 웃게 되는 갓기들의 수련회 | 돌들의침묵 | BABYMONSTER(베이비몬스터) 'FOREVER'](http://i.ytimg.com/vi/FISAO7BwIxE/mqdefault.jpg)
New school hot Rodding. Good to see. 😎
I like this. I'm in the process of trying to figure out what I want to do with my aba and I think I just figured it out! thanks for the insight!
After watching, I decided to build something similar. It is very simple and works every day of year if you live in the Caribbean.
Good video, dude. Informative and clear. Seems like it progresses from idle to main very smoothly. I'm considering a similar setup for my twin cam mini build. The sound is nothing short of erotic.
thanks man, future plans for this car include r1 carbs and a bigger cam
I'd love to see some more videos on this car if you still have it. I've been planning on a similar swap on my Mk2
Hanging idle for a split sec. after throttle ,that generally is a sign that there is more aire than fuel entering the combustion chamber. Another thing is. Id get a choke hooked up to those carbs. If you have any questions about tuning the carbs shoot me a message
Yeah, 4 36mm carbs is overkill. R1 carbs are overkill. These would be better than the stock intake even, people on vwvortex often don't know what they're talking about.
I’m doing the bike carb swap on my mk3 right now, really enjoyed this and its sold me on buying 600R carbs and saving the time waiting for the next r1 deal. If I want the larger carb I can always “upgrade” to them later right?
Great build 👌
Hey I need more info on the fuel regulator and how you hooked up ur return gas line
Nice Engine guy!
looks sick man! I have some experience with carbureted motorcycles so I really want to give this a try on my 1976 Opel Kadett, the car already has a carburetor setup, so dont need to mess with fuel pumps and stuff I think
Just swap in a 2.0 8v from a vectra of calibra 😁
Same thing on my Opel rekord e1 1.9, how did it went for you
Wow amazing! What was your final jets size setup? Main jet, slow jet and mixture screw turns out?
Right on, man.
Pretty simple question but how did you build your intake manifold to the itb setup?
Do the carbs have any sort of choke? That should fix early morning cold starts
Excellent man
Did you ever do a write up ? I wanna do this
Would it work the same on an audi 80 1.8?petrol
kayrab9000, how are you doing man!
I have an '84 Scirocco with an 2.0l 8v OBD2 swap, I'm planning on converting it to carbs. I wonder if you have a check list or something similar of the conversion process you had to go. thanks!
interesting little golf
What size of wheels and tyres do you have?
Nice video do you think I could do it to my jeeta mk1 ?can I get that info from ur swap really interested
I like it. :)
Fuck that thing sounds good.
to what degree is the base
Going for it thank u
My bike has bike carbs strangely, and it starts in the cold, is your choke connected?
How much HP?
What wheels are these?
Dont those carbs need back pressure? Pretty sure i had a similar set on a kawasaki ex500 engine in a quad. You can compensate with upping the jetting but I dont think its ever the same again.
Bottom Gear same carbs on my gsxr and they only require a air box factory due to jetting. Now once you change exhaust or air pods it changes how they function and don’t like it until you go way bigger on the fuel jets to make up for the air then it makes a already monster bike a straight animal. On a car they work the same off of intake suction vacuum so get your fuel ect
Hey man, cold starts are a nogo so there's no choke? Did those carbs not have a choke or is it just not wired/linked?
These carbs have choke for cold starts for sure! Seems it just not linked...
hey im the one who built this car(friends youtube page) and the carbs do have a choke but its sized for a 600cc engine stock and i cant seem to resize it. Unlike a traditional carburator i.e. holly, edelbrock on a v6/v8, these bike carbs have no accelerator pump. So below 60*f the airs too dense and there isnt enough fuel to make a solid combustion. Im thinking about remedying this issue with a block heater; warmer engine on first start, warmer oil, easier for starter to spin a million times, quick start up in colder weather. Anything at or above 65*f this thing has no problems starting.
kayrab9000 hey man I could use some help with my fuel delivery and how to reroute the gas return if you could help me out that would be awesome
Matthew Flynn please explain further, or message me on instagram @kayrab9000
kayrab9000 take a look at some of my videos if you can my car is a Honda prelude I’m trying to put bike carbs in it the car originally came with duel carbs but now it will have 4 I don’t have a return because the car never had one to begin with
A hyundai driver probably disliked this.
How mach the price the bike carb....
What engine is that? Cos the intake/carbs are on the front of the head, I know the cars from this era the intake is on the rear of the head, unless you guys in the America's had a different 8v engine to us here in europe.
Nice video and well done to you and your father for such a good build.
crossflow head
This is a Aba 2.0 not a 1.8 so the intake is on the front exhaust on back
You sir are a fucking genius! I wanna carb my aba now..... thanks dog
hey Im not sure who exactly filmed this but id love to pick their brain, bout to do a similer swap to my 85
similar setup in my stock 4age smallport... but in 45 WEBERs... even if they re still jeted set up for 2 litre engines or bigger.... i see same torque same places .. in 3.000rpm clears the misses and you can full throttle it to see max power until 5.500/6000 rpm.. i keep power a bit higher cause 4 ag's have more light internals!!! if you play wise with pneymatic and the distributor you might see better work.. watch out with em if you dont want to burn your engine!!! run it rich for its safety !!!!!
I have pretty much the same car and swap I want to know what different standard transmissions I can attach
Tristen Donaldson pretty much every VW non hydraulic clutch gearbox
Thanks a lot 👍🏻
Looking to carb swap my 2001 2.0 cabrio. Ill probably do what driving 4 answers did and install a motorcycle lp fuel pump. Long term i also want to mount the engine longitudinally and make a rwd setup, run it in the 24 hrs of lemons.
How does it run in a 2.0? I have a 2.2 and wanna do this
@@Onceuponajuan it would depend on what carbs you get. So say you were stealing carbs from a motorcycle for your 2.2L engine. You need a way to compare them apples to apples. My idea is you need equivalent airflow rate. So for a 1000cc/1L bike engine for example you have 4 carbs, so 250cc per carb. Then find the target rpm (11000 rpm for example on some bike). Every 4 strokes = 2 rotations. Every 2 rotations = 1 intake stroke of 250cc per carb. So at 11000 rpm you would be making 250cc of flow at 5500 "rpm". If you follow the unit conversion and then convert to cfm (cubic feet/min) its about 50 cfm per carb. In order to be viable in acar without modification you need a similar cfm. For a 2.2L at 1 carb per cylinder at 4000rpm you are about 40cfm. At 5000rpm it is better at about 50cfm. The point where the cfms (air flow rate) match are where you know the carb will work as intended. Hope this helps.
@@Danleyson1 thank you! Helped a lot it's for a mazda b2200 lol you saved the day
@@Danleyson1 great example actually my truck is max rev at 6k rpm but 50 cfm sounds good since I don't need to go up that much
@@Onceuponajuan if thats the case you need to decide your tuning range/target rpm.
you need to calculate the cfm for each variation based on the cylinder displacement. Find truck engine displacement, call that A1. Find target rpm of truck engine B1. Airflow is then dV1=(A1/#cylinders)*(B1/2). If you calculated using liters and rpm thats ok but make sure the units of dV2 are the same as dV1. dV2 is for the carburetor host (bike). So if the truck had a 3.4L 6 cylinder engine of course 50cfm is not necessarily the airflow at 5000rpm. Say we had a 4.4L engine instead of 2.2L from before. You would double your flow at any rpm so at the same rpm as the previous example you would now need 2 carbs per cylinder
how do you think it would run with a 276 cam with the carbs
And would you upgrade the fuel pump for more fuel pressure
Rust is natures weight reduction
You said 13 degrees or 30?
Common sense I know but I just want to make sure
hey this is my car(friends youtube page) and its at 30 degrees of advance at 3000rpm.
dude i nees help to do this
Holy crap that thing is rusty. Sounds really good though.
What main jet number do you use?
Oprisa Andrei think he said 200
hey yea this is my car and i have the jets at 200.
Make a thread! Obd1 or obd2 aba?
0bd2
flat side carbs/slides
Lean mane. Thats why it hangs... pilot circuits.
Anyone know his instagram?
VW Love kayrab9000 on ig
omg that fkn flies 😂
What u did to deleted the flowmeter? help or Disney come with?
hey this is my car(friends youtube page ect ect ect). If you explain yourself better then I can assist you better
Kann ich die Rückleuchten haben 😂
Big kayaker I see