I always look forward to your video's..... I can hardly wait to hear that Belarus run again..😊 You are an inspiration to me the way you tackle about any project..
Good day Yea it's Thursday morning, possibly 1 in snow on ground. Boy good help is hard to find, doggie & kittie. Our neighbor that had Belarus, said they were made for average man to work on? Good luck & thanks. Don't forget to put anti-freeze in LOL Thanks hope to here it run
That is for thous of us who lived in the Soviet union not a Belarus. But it was sold under the name of Belarus(this tractor was made in the Vladimir tractor factory) . The factory that made this model is long gone and all the parts you get from the store are cheap Chinese know offs. And they are pretty bad. Your lucky this has been converted to a UTN 5 pump, that one will last a long time. Nice to see a lot of these still survive in North-America.
You should get your help some coffee they'll be a little more active! Lol don't do like I did ,I broke the little sleeve that the rack turned, had to have one made by a machinist!
@@aleksandr8263Александр, перейдите на мое видео на TH-cam, мое новое обновление трактора, на отметке 16-18 минут, и это все, что я сделал. Я толкнул плунжеры и запустил их, пока они не разболтались и не использовали пенитрационное масло. Вот и все.
Your video helped me figure out my 420-a balarus. Thanks
Richard, you taught me something today. I've never been into a fuel pump. Hats off to you!
MB BAR RANCH
Thanks for the quick shots of the little Doggie and other friends around your place. You can be just like the school kids and take a snow day off!
I always look forward to your video's..... I can hardly wait to hear that Belarus run again..😊 You are an inspiration to me the way you tackle about any project..
Cant wait to here it run!
Good day Yea it's Thursday morning, possibly 1 in snow on ground. Boy good help is hard to find, doggie & kittie. Our neighbor that had Belarus, said they were made for average man to work on? Good luck & thanks. Don't forget to put anti-freeze in LOL Thanks hope to here it run
That sucker is air cooled! Very interesting!
Bless your heart. A Belaruskie. Good luck with that old Soviet Bloc equipment.
That is for thous of us who lived in the Soviet union not a Belarus. But it was sold under the name of Belarus(this tractor was made in the Vladimir tractor factory) . The factory that made this model is long gone and all the parts you get from the store are cheap Chinese know offs. And they are pretty bad. Your lucky this has been converted to a UTN 5 pump, that one will last a long time. Nice to see a lot of these still survive in North-America.
I had a 500 Belarus . Yu couldn't stop it from leaking all over the place. Oil everywhere ,finally sold it .Couldn't take the leaks anymore
@@geo52041 Yup that oil leak problem is notorious on these models. Once it starts leaking it's none stop.
Thanks for the video.
Now I know how to remove a screw.
That should help it run👍
KEEP GOING ON IT RICHARD
you do know these injection pump are lubed with motor oil did you fill it up cause it looked bone dry!!!!!
👍👍👍👍👍👍👍
You should get your help some coffee they'll be a little more active! Lol don't do like I did ,I broke the little sleeve that the rack turned, had to have one made by a machinist!
Dónde está ubicado el taller i cuánto cuesta la rectificada bomba de tractor belarus
I took the pump apart and cleaned myself. Only cost was my time.
alright, anytime you can sell some equipment bodes well.
Do you have an AC D14?
yes I have a D14, and a D10, D17, D19.
@@oldfarmjunk101 Do you have a video of it?
@@oldfarmjunk101 Is the D14 for sale?
@@davidlaroche7901 it could be but then I would not have one. It runs good but it jumps out of 2nd gear and the high low one doesn't work.
@@oldfarmjunk101 OK, I wasn't sure if your tractors were for sale or not.
какого года трактор?
the pump is 1978
покажите как закреплен насос дозатор?
@@aleksandr8263Александр, перейдите на мое видео на TH-cam, мое новое обновление трактора, на отметке 16-18 минут, и это все, что я сделал. Я толкнул плунжеры и запустил их, пока они не разболтались и не использовали пенитрационное масло. Вот и все.
I used Google translate я использовал переводчик гугл