I used your tutorial to make my idea of an elf, I can’t thank you enough as I was getting disheartened with my efforts thank you for sharing your idea’s they are fantastic! You have probably helped my sanity in these difficult times we’re living at the moment 🤔
You made it look so easy...Ive sculpted before but i used solid clay not knowing i could hollow it out with aluminum foil.. Live and learn...Thanks for showing me
I don't know why, but i winced every time you created toenails and fingernails :D Beautiful work, so detailed you could confuse a palm-reader! Hope to see more soon. :)
Thank you, I think I possibly used all genesis on him from what I remember. Generally genesis is great for blending skin tones etc and acrylics are great for bold colours and sharper lines. I have a painting the face vid coming soon x
I'm so excited to do this! I never knew feet & hands didn't need to be solid clay (any of the body) I sure wasted a lot of clay on my one and only doll I made. Thanks for the tutorial!
Hi from Ontario Canada. This is first time I've watched your video and the timing is perfect as I'm hoping to sculpt the marionette Fietz from The Sound of Music. We are going to see The Sound of Music on stage. in December . I know that I'll be referring to you videos while I'm attempting this project. Thanks for sharing.
Hola, es impresionante el trabajo que realizas es pura artesanía y se nota el cariño con el que lo haces. Pero aparte de esto estoy enamorada de este duende en especial, sería mi primer duende ya que ninguno me llenaba el corazóncomo lo hace este. Me gustaríasaber si esta en venta y si así fuera el precio, muchísimasgraciaspor adelantado un abrazo enorme desde España
Your tutorials are so helpful, and your dolls so charming. Getting the right wire has been such a barrier for me to start making armatures, so I really appreciate your videos! 💗Is the plastic coated wire used for the fingers anodized aluminum wire or is it galvanized steel wire?
Apoxie Sculpt - 2 Part Modeling Compound is this what you used? you spelled it with a "y" and I just wanted to make sure... it's not listed in your tools or materials...great share...Thank you
Hi. Can I place a figure in the oven lying down? Is there a risk of it becoming deformed? If so, does someone know how to prevent it from deforming? Thank you.
Can i use super sculpey living doll only for sclupting all of these? I can’t afford all the type of those polymer clay :( it’s really expensive in my country
Ok I went and ordered the temp plate on poseable drone fairy tribe it's on I don't know what you calling 29 CM okay why I'm trying to get ahold of you is when I copied the template on the back page of the drone the picture of him the top part of his feet did not finish coping so do I need to get a bigger piece of paper to copy it or can you copy from his knees down for me I would appreciate it thank you Vivian Richards
Hi Vivian, I don’t have any messages from you on Etsy? The US and UK have different paper sizes so you need to reduce the template when you print, try 90% or ‘fit to page’.
Absolutely amazing, you make it look so easy 💕👌
If you're interested in making fantasy creatures - find me on PATREON: patreon.com/fairytribe 😊
Fascinating to watch the process... Thx 🙏 for sharing your gifts with us.... Sincerely sincere... Miss Judith 🌹 🎶
Wow! So detailed! Great work! Excellent tutorial!
Thanks so much!
So helpful. Thank you.
Incredibly helpful series, thank you!
Really good job ! Congratulations ! And thanks a lot to share
I used your tutorial to make my idea of an elf, I can’t thank you enough as I was getting disheartened with my efforts thank you for sharing your idea’s they are fantastic! You have probably helped my sanity in these difficult times we’re living at the moment 🤔
That's so lovely to hear, thank you I'm glad my videos helped. Art is so good for helping zone out of the mad world, keep it up x
Einfach wunderschön danke perfekt liebe Grüße
Very good details, thanks for sharing.
Einfach nur Perfekt 😊
Wow you are totally unbelievable!!
Woooow lo haces perfecto!!! Te felicito!!!! Pero más te felicito por seguir la voz de tu alma!!!
Thank you! 😁
Your work is just amazing
Thank you so much 😀
Great Tutorials; Very helpful🙂
Thank you 😊
Absolutely awesome.
When you sliced that little part of the toe off, my toe screamed. Whew! I guess that's a good thing. Your work is incredible.
LOL! thank you :)
I Have always had a hard time with hands. I watched this tutorial and my first attempt looked pretty good. Thanks for this tutorial
That’s great I’m pleased it helped 😃
I am amazed!!!
You made it look so easy...Ive sculpted before but i used solid clay not knowing i could hollow it out with aluminum foil.. Live and learn...Thanks for showing me
that's great, and it saves on clay plus if the clay is too thick it may not cure inside. :)
Thank you thank you thank you for this video! Amazing work and very helpful.
Thank you!
Merci beaucoup vous êtes trop forte j’adore 🙏🙏🙏❤️❤️💋💋💋
I loved it💯
How do you keep the finish looking so smooth?? Amazing job, I just started doing this!
❤
Fantasticos, me encantan. Millones de gracias. Un saludo desde España
yes! its so smexy ;D TABLES also keep up the good work O.O
I don't know why, but i winced every time you created toenails and fingernails :D Beautiful work, so detailed you could confuse a palm-reader! Hope to see more soon. :)
LOL, did it look painful? Poor Gnome! :D
Thank you for this wonderful video! So mesmerizing. Can you please tell me--what did you use Genesis heat set paints on (versus acrylic paints)?
Thank you, I think I possibly used all genesis on him from what I remember. Generally genesis is great for blending skin tones etc and acrylics are great for bold colours and sharper lines. I have a painting the face vid coming soon x
no u bum
I'm so excited to do this! I never knew feet & hands didn't need to be solid clay (any of the body) I sure wasted a lot of clay on my one and only doll I made. Thanks for the tutorial!
No problem, yes you have to be careful how thick you go with the clay too or it may not cure properly in the middle 😊
I saw the link on facebook and had to subscribe your channel.
brilliant, thank you!
You are an amazing sculptor! Would love to have your talent!
Thank you so much 😀
Hi from Ontario Canada. This is first time I've watched your video and the timing is perfect as I'm hoping to sculpt the marionette Fietz from The Sound of Music. We are going to see The Sound of Music on stage. in December . I know that I'll be referring to you videos while I'm attempting this project. Thanks for sharing.
That’s great, good luck with the project!
Wow!!! 🇺🇸🇦🇷😉
And you can bake it with the plastic coated wiring?
I do, clay bakes at fairly low temperatures and I have a separate oven for clay in case of fumes.
Hola, es impresionante el trabajo que realizas es pura artesanía y se nota el cariño con el que lo haces.
Pero aparte de esto estoy enamorada de este duende en especial, sería mi primer duende ya que ninguno me llenaba el corazóncomo lo hace este. Me gustaríasaber si esta en venta y si así fuera el precio, muchísimasgraciaspor adelantado un abrazo enorme desde España
Hello and thank you! He was sold a while back sorry.
Where do you buy stretchy tape for the body? I have loved making these little critters. You make it so easy to follow. Thank you!
Thank you! There should be links under the videos 😊
👏👏👏👏👏😘
Your tutorials are so helpful, and your dolls so charming. Getting the right wire has been such a barrier for me to start making armatures, so I really appreciate your videos! 💗Is the plastic coated wire used for the fingers anodized aluminum wire or is it galvanized steel wire?
thank you I'm glad they help :) I'm not sure what type of wire is under the plastic sorry.
Apoxie Sculpt - 2 Part Modeling Compound is this what you used? you spelled it with a "y" and I just wanted to make sure... it's not listed in your tools or materials...great share...Thank you
Yes, mine was a DIY store one but Apoxie sculpt is the same, I think you get longer to work with that one before it sets too.
With the apoxy sculpt, I’ve always wondered if it can be baked once cured?
As far as I know it can resist temperatures slightly over what you bake the clay at.
When you put that toe nail in 😲😲😲😲
Hi.
Can I place a figure in the oven lying down? Is there a risk of it becoming deformed?
If so, does someone know how to prevent it from deforming?
Thank you.
Support any areas that you may think would need it. I have a fibre glass wool that's used for ceramics so is fine in the oven.
I love this! How do you make the cool clothes?
thanks, with scraps of various fabric and mostly glueing.
@@emzoddworks would you be able to do a tutorial on clothes making for these please?
@@louiserandall3206 will add it to my list 😊
Can i use super sculpey living doll only for sclupting all of these? I can’t afford all the type of those polymer clay :( it’s really expensive in my country
Hi, yes any polymer clay. Living doll is a good clay I used to use it all the time.
What was the white clay you added to the feet?
That was an apoxy clay for added strength but you don't have to use it :)
Supertoll
Hallo liebe Grüße es ist so schade , dass ihr soooo weit weg wohnt . Würde sofort zum Kurs kommen..
I don’t teach at the moment, I just make the videos 😊
Ok I went and ordered the temp plate on poseable drone fairy tribe it's on I don't know what you calling 29 CM okay why I'm trying to get ahold of you is when I copied the template on the back page of the drone the picture of him the top part of his feet did not finish coping so do I need to get a bigger piece of paper to copy it or can you copy from his knees down for me I would appreciate it thank you Vivian Richards
Hi Vivian, I don’t have any messages from you on Etsy? The US and UK have different paper sizes so you need to reduce the template when you print, try 90% or ‘fit to page’.
If you have any further problems please message me through Etsy thanks
Hi. Do you have GNOMOS to sell? I'm in Peru, is there any way I can buy it? THANK YOU
Sorry none for sale at the moment
😂❤😂
Ölçüleri nedir yazarmısınız (cm)
He is sold now but I think his feet were about 7cm long and hands 4cm long roughly.
@@emzoddworks thankss🙏
They only have 4 fingers because they have no need to flip anyone off. 😁