What do you do when the tilt axis isn't working ? (it constantly leans forward no matter what adjustment i fix it to) I'm using a sigma 16mm f/1.4 lens on a Sony A7
yes, sony a6400 might be pretty light for it, maybe you can ducktape a bit weight beneath the camera plate, or if u did purchase the transmitter have it on there too
Hi! I have been fighting with balancing the roll axis for a long while now. After balancing it supposed to stay in any position when slightly rotated, but it keeps rotating back to horizontal position. Both tilt and pan axes are getting balanced perfectly fine. The rig weight is 3.8kg which is below specified max load. Any ideas what might be causing that? Thanks!
Hi please can I use a Sony a7siii with a 16mm f1.4 like a 2kg weight setup on this gimbal with no issues ..cos people say it vibrates and make noise when it doesn't have much weight on it
You can refer this camera and lens combo compatible list: zhiyun-website-shenzhen.oss-cn-shenzhen.aliyuncs.com/instruction/20231013/1697185550390-DBGZRBn4.pdf
great! thanks for sharing :) When will there be a example for bigger cameras like RED or Sony FS7? I got problems for balancing the roll axis well with big RED Camera
hi Alexander, yes, please def subscribe and stay updated, there will be very specific tutorials on RED and FS7, beside that there is already a quick & dirty troubeshooting guide out there for balancing your camera, since lots of people asked for it. It's this one: th-cam.com/video/NojHhgIBqE4/w-d-xo.html
my gimbal even when calibrated, when turned on, shakes with any motor calibration setting. Is it a factory problem? I have found other users on the internet who have had the same problem but no one explains how to fix it. Thank you
I have the Zhiyun Crane 3S and Sony A7sIII. But the Sony will not connect to the Crane 3S . This is frustrating, as I want to use the record button on the gimbal instead on the camera. Is Sony A7sIII not compatible with this gimbal? And the gimbal axis motors are noisy, anyone else experienced this?
hi the gimbal should be able to allow you start/stop record on the sony a7siii. Just to double check, did you update ur gimbals firmware to the latest? under menu/camera did u already select SONY? did u on the sony a7Siii i forgot in detail but there should be a USB setting in the menu, select something like tether instead of power
@@marcelbrandel9078 thank u for answering! I have not updated the firmware, I will do so and also check the usb settings on the Sony. But is the Crane 3s supposed to be quiet? The noise from the axis motors annoy me.
@@meske24 no problem. maybe try have the motor setting on low and go thru the same troubleshooting process of balancing in my previous two videos, then it should stay quiet.
Thank you for great videoes! :) I have a big issues balancing my camera (Blackmagic 4K) when the transmitter has come on the gimbal. Do you know how to fix it?
Hey guys ! My Crane S stays on sleep mode even when I get it off and on (even if it's well balanced). So I tried to do the calibration but it stays on "waiting..." and never shows "STEP 1"
Hi. When everything its done, balance, connect cables, etc., first at all you must to set up the camera on remote control, in the gimbal you must select camera "sony-usb" option. And after this, first turn on the stabilizer and then the camera.
@@aozfe I will give it a try but first I need to get a replacement gimbal. It went into sleep mode and gave me the red light of death on the power button, right in the middle of a paid video shoot. Seems to be an issue with the Crane 3s.
hello good afternoon, i have a problem connecting my sony a7iir to the zhiyun crane 3s. The camera does not connect with the stabilizer and I can not have iris control, iso ... in the driving control. How could I solve it? Thank you very much
hi with Sony I rememeber it was only possible to start and stop rec. U'll need the sony multiport to USB Type-C cable and in the menu of the gimbal need to select Sony under camera setting
Hello everyone. I have recently bought the crane 3s with the easysling handle to shoot with my cannon 5D mk4 but I am having problems with the gimbal beeping 4 times and motors turning off? I thought it may of been a balancing issue but I have watch multiple tutorial balancing videos and think I have correctly balanced the gimbal. I have tried speaking with a number of Zhiyun support pages but have not had much back in the way of responses. Can anyone please help?!
Really good instruction videos you are making here. Just plane on how to do things. I am not into doing tutorials my self so I like seeing good tutorials that I can link to when I see others having problems. Could you please make one on six axis calibration so I can share to those who are having problems :)
first video that actually helped. thank you.
What do you do when the tilt axis isn't working ? (it constantly leans forward no matter what adjustment i fix it to) I'm using a sigma 16mm f/1.4 lens on a Sony A7
Hi Marcel I loved your videos. Nice Work !
Filipe Rodrigues thank you
What about balancing the base plate before mounting the camera?
It has no sense. It all depends on the final weight.
I have sony a6400.And i can't balance TILT AXIS ( 1:27 ), however i put it it goes forward.I can't make it stay up...
I cant setup this from 1:34, need some heavy load on other side? Sony Alpha 6400 is my camera.
yes, sony a6400 might be pretty light for it, maybe you can ducktape a bit weight beneath the camera plate, or if u did purchase the transmitter have it on there too
@@marcelbrandel9078 i put this little piece under camera you show on video before and got balance. My lens make problem, because is to heavy.
@@ssaajjkkoo then you;ll most likely need to shift it more to the back on the base plate
When doing tilt my camera only leans one way. No matter how many times I do and micro adjust the lens will not stay looking up
Excellent
Hi! I have been fighting with balancing the roll axis for a long while now. After balancing it supposed to stay in any position when slightly rotated, but it keeps rotating back to horizontal position. Both tilt and pan axes are getting balanced perfectly fine. The rig weight is 3.8kg which is below specified max load. Any ideas what might be causing that? Thanks!
Zooming was one of my main worries. Thank you so much.
Hi please can I use a Sony a7siii with a 16mm f1.4 like a 2kg weight setup on this gimbal with no issues ..cos people say it vibrates and make noise when it doesn't have much weight on it
You can refer this camera and lens combo compatible list: zhiyun-website-shenzhen.oss-cn-shenzhen.aliyuncs.com/instruction/20231013/1697185550390-DBGZRBn4.pdf
Hye is there a cable that allow to control a Sony FS5? Thank's.
great! thanks for sharing :) When will there be a example for bigger cameras like RED or Sony FS7? I got problems for balancing the roll axis well with big RED Camera
hi Alexander, yes, please def subscribe and stay updated, there will be very specific tutorials on RED and FS7, beside that there is already a quick & dirty troubeshooting guide out there for balancing your camera, since lots of people asked for it. It's this one: th-cam.com/video/NojHhgIBqE4/w-d-xo.html
Can you show how to install plates to camera and then to gimbal.
How do you get the camera to angle straight up?
you could just use the joystick in pf mode and push up, or if u meant while balancing then just release the axis lock and adjustment lever
Please help me now. The roll Axes is STUCK!!! How i can move it?? I put out the screw but nothing
hi Piero, do you mean the roll axis lock doesn't work and is stuck or do you mean the screw that you loosen to adjust the roll axis is stuck?
my gimbal even when calibrated, when turned on, shakes with any motor calibration setting. Is it a factory problem? I have found other users on the internet who have had the same problem but no one explains how to fix it.
Thank you
Too much motor power ..rig is probably too light .. turn motor power to low and see how you go .. worked for me
I have the Zhiyun Crane 3S and Sony A7sIII. But the Sony will not connect to the Crane 3S . This is frustrating, as I want to use the record button on the gimbal instead on the camera. Is Sony A7sIII not compatible with this gimbal? And the gimbal axis motors are noisy, anyone else experienced this?
hi the gimbal should be able to allow you start/stop record on the sony a7siii. Just to double check, did you update ur gimbals firmware to the latest? under menu/camera did u already select SONY? did u on the sony a7Siii i forgot in detail but there should be a USB setting in the menu, select something like tether instead of power
@@marcelbrandel9078 thank u for answering! I have not updated the firmware, I will do so and also check the usb settings on the Sony. But is the Crane 3s supposed to be quiet? The noise from the axis motors annoy me.
@@meske24 no problem. maybe try have the motor setting on low and go thru the same troubleshooting process of balancing in my previous two videos, then it should stay quiet.
Thank you for great videoes! :) I have a big issues balancing my camera (Blackmagic 4K) when the transmitter has come on the gimbal. Do you know how to fix it?
hi, have you tried this already? th-cam.com/video/IYNpNBjsnGM/w-d-xo.html
Hi guys just got a crane 3s.. And theres a yellow light inside my tilt motor is this normal?
That's the circuit board work indicator light
thanks damn was scared....@@HellenLee-yz2oj
Hey guys ! My Crane S stays on sleep mode even when I get it off and on (even if it's well balanced). So I tried to do the calibration but it stays on "waiting..." and never shows "STEP 1"
Amazing Work 👍
What strength do you set the motors for the A7?
I have set to the lowest
its lovely
Can anyone explain how to connect a Sony A7sIII with the Zhiyun Crane 3S? The A7sIII is on the compatibility list.
Hi. When everything its done, balance, connect cables, etc., first at all you must to set up the camera on remote control, in the gimbal you must select camera "sony-usb" option. And after this, first turn on the stabilizer and then the camera.
@@aozfe I will give it a try but first I need to get a replacement gimbal. It went into sleep mode and gave me the red light of death on the power button, right in the middle of a paid video shoot. Seems to be an issue with the Crane 3s.
Oh, Im so sorry to read it. I hope you can get the replacement soon.
@@aozfe Me too. Last chance for Zhiyun. I truly love their products...when they work.
hello good afternoon, i have a problem connecting my sony a7iir to the zhiyun crane 3s. The camera does not connect with the stabilizer and I can not have iris control, iso ... in the driving control. How could I solve it? Thank you very much
hi with Sony I rememeber it was only possible to start and stop rec. U'll need the sony multiport to USB Type-C cable and in the menu of the gimbal need to select Sony under camera setting
Hello everyone. I have recently bought the crane 3s with the easysling handle to shoot with my cannon 5D mk4 but I am having problems with the gimbal beeping 4 times and motors turning off? I thought it may of been a balancing issue but I have watch multiple tutorial balancing videos and think I have correctly balanced the gimbal. I have tried speaking with a number of Zhiyun support pages but have not had much back in the way of responses. Can anyone please help?!
Did you ever figure this out? I’m having the same issue
you rock!
Really good instruction videos you are making here. Just plane on how to do things.
I am not into doing tutorials my self so I like seeing good tutorials that I can link to when I see others having problems.
Could you please make one on six axis calibration so I can share to those who are having problems :)
Podrían subtitular o poner videos tutoriales en español