Replace Mercruiser outdrive Trim Rams and hydraulic hoses (Alpha one Gen 1 (2)
ฝัง
- เผยแพร่เมื่อ 13 ธ.ค. 2023
- If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualifying purchases.
Fixing boats/Jet ski PlayList: • Fix Boats / Jet Skis /...
************
1. Quicksilver Trim Limit and Sender switch kit: amzn.to/45GOIXb
2. Quicksilver Hydraulic Trim fluid: amzn.to/46Qq1Y5
3. Quicksilver anode Kit (888755Q04): amzn.to/3uIJ89d
4. Quicksilver grease gun: amzn.to/3uOFgDG
5. Alpha one gen 1 Trim Rams:
amzn.to/3GwSt6C
6. Trim Ram Hydraulic Hoses:
amzn.to/4a9rf3x
amzn.to/486qVAE
7. Trim Ram plastic caps: amzn.to/3NlBV5b
8. Craftsman Socket set: amzn.to/3uZQu8e
9. Extreme Grease: amzn.to/46TgwY4
10. Outdrive anode bolt plug (19-47579): amzn.to/3NcHKSq
***********
1. How to install outdrive to boat
• Install Mercruiser alp...
2. Replace Anode kit
• Replace Mercruiser out...
3. Replace outdrive bellows/shift cable (PART 1)
• Replace Mercruiser alp...
4. Outdrive upper unit rebuild (PART 1)
• Replace Mercruiser upp...
5. Outdrive Lower unit rebuild (PART 1)
• Mercruiser outdrive lo...
6. How to measure Trim Rams before purchasing
• How to measure outdriv...
7. How to air-bleed your trim rams and hydraulic hoses
• How to Air bleed Mercr...
8. Outdrive not trimming up - Common causes
• Mercruiser outdrive no...
9. Replace hydraulic Trim Solenoid
• Boat outdrive not trim...
10. How to grease your outdrive grease fittings
• How to properly add gr...
11. 1996 Dyno Air rebuild
12. Build own custom logo Skateboard
• Build your own custom ...
13. Mount Skateboard on wall
• How to hang skateboard...
👍😎 - แนวปฏิบัติและการใช้ชีวิต
If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualifying purchases.
Fixing boats/Jet ski PlayList: th-cam.com/play/PLjCXOz8TSkZlae2qY97uVVTm3JdBOUoRS.html&si=0QF9J0YNrNOKii3a
************
1. Quicksilver Trim Limit and Sender switch kit: amzn.to/45GOIXb
2. Quicksilver Hydraulic Trim fluid: amzn.to/46Qq1Y5
3. Quicksilver anode Kit (888755Q04): amzn.to/3uIJ89d
4. Quicksilver grease gun: amzn.to/3uOFgDG
5. Alpha one gen 1 Trim Rams:
amzn.to/3GwSt6C
6. Trim Ram Hydraulic Hoses:
amzn.to/4a9rf3x
amzn.to/486qVAE
7. Trim Ram plastic caps: amzn.to/3NlBV5b
8. Craftsman Socket set: amzn.to/3uZQu8e
9. Extreme Grease: amzn.to/46TgwY4
10. Outdrive anode bolt plug (19-47579): amzn.to/3NcHKSq
***********
1. How to install outdrive to boat
th-cam.com/video/HgMSGiSiBA4/w-d-xo.html
2. Replace Anode kit
th-cam.com/video/qy_qclP3zUQ/w-d-xo.html
3. Replace outdrive bellows/shift cable (PART 1)
th-cam.com/video/NcObTOYXtQM/w-d-xo.html
4. Outdrive Upper unit rebuild (PART 1)
th-cam.com/video/i7nRJPbRYPI/w-d-xo.html
5. Outdrive Lower unit rebuild (PART 1)
th-cam.com/video/ehTA4BRH4t8/w-d-xo.html
6. How to measure Trim Rams before purchasing
th-cam.com/video/lQzpTJL4bYw/w-d-xo.html
7. How to air-bleed your trim rams and hydraulic hoses
th-cam.com/video/gfW3dWsSLkE/w-d-xo.html
8. How to grease your outdrive grease fittings
th-cam.com/video/7q1sBu0TsPw/w-d-xo.html
9. 1996 Dyno Air rebuild
10. Build own custom logo Skateboard
th-cam.com/video/9Isty_4fIIw/w-d-xo.htmlsi=LzopRUqSnSce8djB
11. Mount Skateboard on wall
th-cam.com/video/c5QDCKZNGH0/w-d-xo.htmlsi=gfAgvkilHv-XUp0s
👍😎
One step closer, nice 👍😁
Good morning Dave. ☕️
One step closer indeed. 😎👍
Hi i have a mercruser bravo 2 stern🎉drive do i need a hydrolic pump to lift the rams as im pairing the sterndrive with a yanmar 4lh dte engine or does the yanmar have a built in hydrolic pump
Hello I was wondering what those black parts are right above the steel braided lines to the left? Also did you order the decals from Amazon? Great detailed video. Is this basically the same procedure on a Bravo 3 outdrive? I have all the parts and will be doing mine today
@@aayala302
Thanks for watching, are you referring to the Trim Rams? We purchased our replacement decals from ebay.
@@DIYwithMichaelBordersno, just to the left of the hydraulic lines. Looked like the solenoids maybe? I performed this project on my Bravo 3 and it was a breeze! Thanks for the detailed video!! Looking forward to doing more DIY with your help 😂
@@aayala302
We are honored to help, no joke. We love talking boats and jet skis.
Merci beaucoup❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
Hope your project is going well, let us know if you have any questions. 🧰
Should we cross thread these?
@@thejamestaylorteam
Good morning ☕️
That’s a great question! 😁👍🧰
@@DIYwithMichaelBorders lol great video just ripping on ya a little. Probably going to do mine this weekend after watching this. Thanks for the detailed video.
@@thejamestaylorteam
We are honored to help! Hope your DIY project goes well. 😎👍