How to Air bleed Mercruiser outdrive Trim rams and hoses
ฝัง
- เผยแพร่เมื่อ 7 ต.ค. 2024
- If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualifying purchases.
Fixing boats/Jet ski PlayList: • Fix Boats / Jet Skis /...
************
1. Handheld inspection mirror: amzn.to/4738hIY
2. Quicksilver Trim Limit and Sender switch kit: amzn.to/45GOIXb
3. Quicksilver Hydraulic Trim fluid: amzn.to/46Qq1Y5
4. Quicksilver anode Kit (888755Q04): amzn.to/3uIJ89d
5. Quicksilver grease gun: amzn.to/3uOFgDG
6. Alpha one gen 1 Trim Rams:
amzn.to/3GwSt6C
7. Trim Ram Hydraulic Hoses:
amzn.to/4a9rf3x
amzn.to/486qVAE
8. Trim Ram plastic caps: amzn.to/3NlBV5b
9. Extreme Grease: amzn.to/46TgwY4
10. Outdrive anode bolt plug (19-47579): amzn.to/3NcHKSq
***********
1. How to install outdrive to boat
• Install Mercruiser alp...
2. How to replace Trim Rams and Hoses
• Replace Mercruiser out...
3. Replace Anode kit
• Replace Mercruiser out...
4. Replace outdrive bellows/shift cable (PART 1)
• Replace Mercruiser alp...
5. Outdrive upper unit rebuild (PART 1)
• Replace Mercruiser upp...
6. Outdrive Lower unit rebuild (PART 1)
• Mercruiser outdrive lo...
8. How to grease your outdrive grease fittings
• How to properly add gr...
👍😎
![โรงเรียนตอนตี 2 โคตรหลอน..!! [โรงเรียนไดเม่]](http://i.ytimg.com/vi/2MAEMwqVYh8/mqdefault.jpg)
If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualifying purchases.
Fixing boats/Jet ski PlayList: th-cam.com/play/PLjCXOz8TSkZlae2qY97uVVTm3JdBOUoRS.html&si=0QF9J0YNrNOKii3a
************
1. Handheld inspection mirror: amzn.to/4738hIY
2. Quicksilver Trim Limit and Sender switch kit: amzn.to/45GOIXb
3. Quicksilver Hydraulic Trim fluid: amzn.to/46Qq1Y5
4. Quicksilver anode Kit (888755Q04): amzn.to/3uIJ89d
5. Quicksilver grease gun: amzn.to/3uOFgDG
6. Alpha one gen 1 Trim Rams:
amzn.to/3GwSt6C
7. Trim Ram Hydraulic Hoses:
amzn.to/4a9rf3x
amzn.to/486qVAE
8. Trim Ram plastic caps: amzn.to/3NlBV5b
9. Extreme Grease: amzn.to/46TgwY4
10. Outdrive anode bolt plug (19-47579): amzn.to/3NcHKSq
***********
1. How to install outdrive to boat
th-cam.com/video/HgMSGiSiBA4/w-d-xo.html
2. How to replace Trim Rams and Hoses
th-cam.com/video/nkcFYl5bL7c/w-d-xo.html
3. Replace Anode kit
th-cam.com/video/qy_qclP3zUQ/w-d-xo.html
4. Replace outdrive bellows/shift cable (PART 1)
th-cam.com/video/NcObTOYXtQM/w-d-xo.html
5. Outdrive upper unit rebuild (PART 1)
th-cam.com/video/i7nRJPbRYPI/w-d-xo.html
6. Outdrive Lower unit rebuild (PART 1)
th-cam.com/video/ehTA4BRH4t8/w-d-xo.html
8. How to grease your outdrive grease fittings
th-cam.com/video/7q1sBu0TsPw/w-d-xo.html
👍😎
You, sir, are the Mr. Rogers of boat repair.
@@hermanprez
Good morning ☕️
Thank you for writing us, we are honored to be able to provide helpful DIY videos to the DIY community.
😁👍🧰
Step by step video, love it, thanks Michael and Merry Christmas to you and your family 👍😁
Thank you Dave, this was an important video for us to create and have available to the DIY community.
Merry Christmas to you and yours.
Great instructions, thank you!
nice job!. when cycling up/down... wait a min between cycles. Air gets whipped into fluid/reservoir. Waiting a few gives air a chance to separate from oil.
Good morning ☕️ thank you. We are honored you took the time to share your thoughts and additional advice.
Any and all helpful info is greatly appreciated here on our channel.
😁👍🧰
Hi again Michael, I have just removed the top hoses so both sides, but the leg, which I hoped would fall down, will not move. I have tried to manually lift up and push down but it seems to be locked. Can you help with a solution, please?
I have a 2001 5.0 Mercruiser. My manual says I can use 10W30 or 10W40 engine oil for the trim pump. Far cheaper than the Mercruiser trim fluid.
@@billybobsowbreath1774
Good morning ☕️ we have seen that in a few manuals as well over the years. That will be personal preference. 😁👍🧰
You should do voiceovers on every “how to” video
Good morning ☕️ we appreciate you watching and sharing your thoughts and feedback, always welcome here on our channel. Not a bad idea…🤔
Hi Michael, I
Firstly, your videos have been of great assistance to me, as I am a mechanical moron.😂 My question is. My Alpha1 Gen1 leg needs air bleeding. However, my leg is in the fully up (trailer posit 4:0, ion) cannot get it down so I can bleed the system. Can I bleed it as is? Or is there a way, other than using the trim switch up, then down, as I push down on the leg at the same time?
@@SteveHardy-w6w
Thanks for watching, any update on your progress? Are you referring to the Trim Rams?
If so, are the Rams stuck in the up position due to corrosion or rust buildup…?…or is the system very low on fluid and filled with air?
As you attempt to trim outdrive up and down, do you hear the solenoids located on the pump motor engaging?
Good morning , what if I only opened the system up inside the boat to replace the o rings on the bottom of the pump ( older style ) I had to remove the pump from the boat , do I drill need to bleed the system like this ?
Rams and hoses should still be full of oil I would think ......
Thanks for your time
Merci beaucoup ❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
Thank you for reaching out to us.
😁👍
Can you drain all the fluid out by just taking those lines off and trimming up? Think my fluid needs replaced to not just topped off
Thanks for watching ☕️
You can however please please please don’t run it dry. You will need to replace pump motor and possibly other parts…not good.
If I am only replacing the lines and not the trim ram, is the bleeding less comprehensive??
I was hoping that I literally could just crack the lines at the connection to the rams and get the air out of the lines that way..
Plz advise..
same question
Hi Mike.. Why does my tilt up/down works perfectly but my trim will only work on the down and not up? Cant be solenoids if tilt up/down is working fine.. Also I hv cleaned the trim limiter connections so I am at a loss as tk what else tk do.. Thoughts?
@@TedDegenhart-f4c
Thanks for watching, any update? Do you see any signs of damage to the wiring feeding into and out of the trim solenoids?
It’s most common for the issue to be electrically as opposed to hydraulically. Any signs of damage to the trim sender or limit switches installed on outdrive?
How do you locate/purchase mercruiser 4.3 trim ram plugs? I'm ready to bleed my hydraulic trim pump lines.
Thanks for watching, we can definitely help. We will need your Outdrive serial number located on drive.
Looking forward to hearing back from you. 👍
I have metal reservoir so how do I refill fluid in it?
@@hsertaw9918
Thanks for watching, any update? Is there an access cap to remove?
I can't get my trim down to do this?
@@EDJ_3D
Good morning ☕️
Any update? Is everything reconnected and secured properly electrically?
👍👍👍👍
Good morning, thank you. We hope this video is helpful for many. 👍☕️
@@DIYwithMichaelBorders 👌👌👌👌👌🤝