I programmed a smart key on 2010 Lexus RX450 and everything was good except the new key cannot open the truck like the original is. Sometimes this happened on other cars as well but most of the time it worked. Any thoughts?
Any chance, you can do a tutorial on changing fuel capacity. I have got a Toyota Hilux 2021, and had to upgrade the fuel capacity for the remote work i do. I would love to get the ecu to see my capacity as 150L (39Gal) compared to 74L (14.5Gal). Any help is appreciated as i have been struggling with this for quite some time now.
with the programmer ,TIS Techstream, can you reactivate just the key fob remote starter if it was deactivated at the end of the free trial? (2018 Lexus nx200)
Can Techstream be used while the engine is off?(Not Acc or IG) Our Toyota 86 has no power at all; when the brake is depressed, the push/start button is not lighting up. Gauges are dead too. The brake lights work though. Car has been flooded, but is now cleaned. Any ideas on how to go about this? Thank you!
Can you do a video for the SACV on a 2012 4.6 liter tundra. How to test which one is bad. I have a code p106b. Thanks for your videos not a lot on toyota out there
Can the Techstream be used to reset and register the ecu-ecm relationship after replacing a broken ecm unit on a 2006 Toyota 4runner? I had to replace the ecm after it was fried by a bad O2 sensor and after I did the diagnostics in the Toyota repair manuals.
My Prius dash looks like a Christmas tree with so many icons. Will this give a good diagnostic of the problems associated with them? Thanks for any assistance.
I have 2 questions. I had a failed connection issue to ECU during key registration of 2004 Lexus GX470. 1. After connect your computer to the car and entering car information, to ensure good connection, should Techstream always give you VIN#? I did not do last time when I programmed a Lexus, or maybe I pressed next too fast. 2. How can I do a quick test to ensure that it connects to ECU ok before registering a new key? I guess I can always check other utility and pull data to see if it connects ok and won't fail during key registration? 3. How can I program new keys or all lost keys if someone swapped out ECU or ignition, and car is not starting? Any steps would help.
Just be sure you have picked the right brand/model at the loading screen and THEN press next. That's a mistake most people do with the procedure. Also, always have a laptop plugged into a power source. You don't want to mess with your car when TechStream tool is active. :)
i bought a prius with original fob(locksmith toll me the fob is working) , when i try to turn on, the display show me no key detected. There's a way to use teachstrem to reprogram the fob, maybe the former owner change the ECU
I am living in Jamaica west indies and we import alot of used vehicles from Japan so I would like to know if it is compatible with the Japanese domestic vehicles
+Toyota Maintenance I have bought the MINI VCI cable and the mini CD software, off amazon. Currently i can't access my toyota. I have tried various laptops and OS, inc 32 and 64 bit windows. The cable lights up just fine, but the message 'can't connect to VIM' shows. What am i doing wrong? Do i need to buy the software directly from toyota themselves?
Yes and it will cost a fortune as its subscription based. The ones you get off ebay or amazon are bootleg pirated copies. you get what you paid for when junk don't work.
hi sir i used mini vci techstream on a toyota grandia 2015, but it dosen't work, NOT CONNECTED VIM, what that means and what is the cheeper diagnosetic tool for toyota d4d?
Hello All. Does anyone happened to know how to program a USED SMARTKEY FOB. I am trying to program a key that belongs to another Lexus that match my 09 es350's key fob. Programming a BRAND NEW key would be simple but I only have a USED one that might required a different procedure. Please help. Thanks.
+tnt 5 minutes ? last time I checked it takes 16 minutes to reset immo.. if you virgined the key then you didn't program a used key you programmed a remanufactured key ..
I have Windows 10 but had to download Java before it would read my vehicle....and I am using a desktop computer so I have multiple usb plugs and the first one I used on back of my tower didnt work then I switched to another usb in back and it connected.
Hello I have a question, you how to open and close the brake when replacing the brake pads must be done in service mode?
I programmed a smart key on 2010 Lexus RX450 and everything was good except the new key cannot open the truck like the original is. Sometimes this happened on other cars as well but most of the time it worked.
Any thoughts?
Any chance, you can do a tutorial on changing fuel capacity. I have got a Toyota Hilux 2021, and had to upgrade the fuel capacity for the remote work i do. I would love to get the ecu to see my capacity as 150L (39Gal) compared to 74L (14.5Gal). Any help is appreciated as i have been struggling with this for quite some time now.
Thank you! This can help me locate a bad TPMS unit on my 2007 Prius.
yes this can help you with TPMS, for Latest Techstream skype: ultratechdiagnostics
with the programmer ,TIS Techstream, can you reactivate just the key fob remote starter if it was deactivated at the end of the free trial? (2018 Lexus nx200)
Hello,
Will I get an ABS light on the dash if I bleed the brakes without using Techstream on my 2001 Tacoma 4x4 with ABS?
Can I use it to command ABS module/pump to follow replacing procedure after replacing ABS module on 2006 Toyota Highlander hybrid? Thanks
Can Techstream be used while the engine is off?(Not Acc or IG)
Our Toyota 86 has no power at all; when the brake is depressed, the push/start button is not lighting up. Gauges are dead too. The brake lights work though. Car has been flooded, but is now cleaned. Any ideas on how to go about this? Thank you!
Sorry, I see you uploaded Part 2. Thanks a lot!!
Is it posible to manipulate with EV mode speed limit in hybrid toyota?
Can you do a video for the SACV on a 2012 4.6 liter tundra. How to test which one is bad. I have a code p106b. Thanks for your videos not a lot on toyota out there
Thanks for the video
Thanks for the nice video. Which version do you use?
Does the techstream software work for a 2008 Corolla?
Best explain thanks 👍
can do pilot injection programming for toyota hilux engine 2GD year 2017
Can the Techstream be used to reset and register the ecu-ecm relationship after replacing a broken ecm unit on a 2006 Toyota 4runner? I had to replace the ecm after it was fried by a bad O2 sensor and after I did the diagnostics in the Toyota repair manuals.
Should be. Did you figure out?
My Prius dash looks like a Christmas tree with so many icons. Will this give a good diagnostic of the problems associated with them? Thanks for any assistance.
What information is provided in the Powertrain option?
Can I reset the lexus ls460 ECU or whatever has the abs ?
22 Pin Cars (DLC1) Is Working With Techstream?
Do you have to pay for techstream software? It won't let me run unless i pay for the registration?
Dose the toyota techstream work on Japanese domestic vehicles
I have 2 questions. I had a failed connection issue to ECU during key registration of 2004 Lexus GX470.
1. After connect your computer to the car and entering car information, to ensure good connection, should Techstream always give you VIN#? I did not do last time when I programmed a Lexus, or maybe I pressed next too fast.
2. How can I do a quick test to ensure that it connects to ECU ok before registering a new key? I guess I can always check other utility and pull data to see if it connects ok and won't fail during key registration?
3. How can I program new keys or all lost keys if someone swapped out ECU or ignition, and car is not starting? Any steps would help.
Just be sure you have picked the right brand/model at the loading screen and THEN press next. That's a mistake most people do with the procedure. Also, always have a laptop plugged into a power source. You don't want to mess with your car when TechStream tool is active. :)
Hi Do you know if this is able to control charcoal vent soloniod or at least monitor gas tank pressure live data? Are these ridiculously expensive?
I'm not sure..I don't own Techstream at this moment..last one was bad, had to return it…..
hi can i use techstream to program key for lexus rx300 2002model and highlander 2002
i bought a prius with original fob(locksmith toll me the fob is working) , when i try to turn on, the display show me no key detected. There's a way to use teachstrem to reprogram the fob, maybe the former owner change the ECU
Does tech stream v13 work on windows 10?
Which Operating system are you using on the laptop. I heard that it works only with windows xp and with a x32 processor?
no, I just talked to Toyota Tech support, If you buy it from them, Windows 10 included
where can i get this software
Sir Mary pas Toyota Corolla 2016 model ha us ma problem aa rahe ha wo 40 SA 50 km chlny k bd pickup chor date. Ha any problem
Does this work on a Citroen c1
That is so cool
thans man nice video
you are welcome….
what about if you are not able to go to the ignition position
Great! thank yopu very much
you are welcome….
Does TechStream automatically recognize any Toyota you connect it to?
I am living in Jamaica west indies and we import alot of used vehicles from Japan so I would like to know if it is compatible with the Japanese domestic vehicles
Yes it does
Thanks for the video!
John Anthony Cantergiani you are welcome...
+Toyota Maintenance I have bought the MINI VCI cable and the mini CD software, off amazon. Currently i can't access my toyota. I have tried various laptops and OS, inc 32 and 64 bit windows.
The cable lights up just fine, but the message 'can't connect to VIM' shows. What am i doing wrong?
Do i need to buy the software directly from toyota themselves?
Yes and it will cost a fortune as its subscription based. The ones you get off ebay or amazon are bootleg pirated copies. you get what you paid for when junk don't work.
you are welcome....
Hello, you are using which firmware version for MVCI 1.4.1 or 2.0.4 to access all the functionality of the Techstream.
thank you in advance
Version V18 is available here for free: th-cam.com/video/Z5rsPUj_VjI/w-d-xo.html
It's possible to scan Toyota Fortuner?
Haw mach brather
Can you use any laptop
very nice you are video and your language
Md Seraz Thank you.
"V-dub, in da house, ja!"
Can this software be used to alter or remove the vehicle speed limiter?
i'm not aware of that…..
Please drive carefully Sir
Can you upload a video showing how to calibrate throttle body please? thanks
not at this time….
will this work with any ob2 to usb cable ?
no
very nice video
thank you...
thank you
you are welcome
Does it work on windows 10?
hi sir i used mini vci techstream on a toyota grandia 2015, but it dosen't work, NOT CONNECTED VIM, what that means and what is the cheeper diagnosetic tool for toyota d4d?
I never heard of Grandia…..which country are you living in ?
it is like a toyota but not quite a toyota. You know like a fake toyota and in america we call those knock offs.
Sir i have a 10.1 screen. When i click the health check i cant enter the next... What should i do with the screen...
Did you find a solution Sir ? I think i have the same issue
how can i get it computers madina al munawar k s a
*Where do i download this software?*
th-cam.com/video/Z5rsPUj_VjI/w-d-xo.html
Where I can get this computer
Where can I get the same computer like you have? I need it for my Tacomas. Thank you!
panasonic toughbook
How much this software? Price
Hello All. Does anyone happened to know how to program a USED SMARTKEY FOB. I am trying to program a key that belongs to another Lexus that match my 09 es350's key fob. Programming a BRAND NEW key would be simple but I only have a USED one that might required a different procedure. Please help. Thanks.
Actually it cost me 5 bucks and 5 minutes to program that used key myself and been using it since.
+tnt 5 minutes ? last time I checked it takes 16 minutes to reset immo.. if you virgined the key then you didn't program a used key you programmed a remanufactured key ..
tnt how?
@@tnt-en5by Do you need to to unlock and virgin a used key first? How can I virgin a used key, any cheap tools or software?
my computer sees the cable and SN and firmware. but when I connect to vehicle, it says cannot see the cable. can you help?
I'm not good with computer software/hardware troubleshooting….sorry.
Use xp or Win 7 32bit. Win 10 will not work
Can this work on Japanese domestic cars like axio?
I don't know...never heard of Axio....
It’s called Toyota Corolla axio
@@arunakhan2343 haan karta hai bha
here in philippine
hi bro i have installed on windows 10 but when i press on connect vechicle it gives an error unable to connect to vim
Ravish Ramgolam me too: (
I have Windows 10 but had to download Java before it would read my vehicle....and I am using a desktop computer so I have multiple usb plugs and the first one I used on back of my tower didnt work then I switched to another usb in back and it connected.
Hi my self MONU Rajput from Monu Singh car technology
I don't have an ignition in my 2009 Toyota Highlander Hybrid!
I have a big problem plzz anybody help me
For latest Toyota Techstream installation via Team Viewer and Mini VCI cable, please contact us, Thanks
Hi where can I buy the Toyota tech stream software. On line
Ebay
@@ToyotaMaintenance the full version or the light ?
any laptop ?
i have problam when i conect to car it give me error plzz help me to solve it
I can't …I don't know what you got and what is the problem…..
hello sir my name waheed i need toyota techstream I have cable but I do not have software plz hell me
google it google your best friend lol just got to search
Thanks
hello
Hi
The only tutorial that really works: th-cam.com/video/sBXpatwWr4M/w-d-xo.html