ฝัง
- เผยแพร่เมื่อ 30 ส.ค. 2023
- Have you been looking for a printer that can handle bigger, faster and more material options? If so, you'll love the Creality K1 Max 3D printer! This printer has a lot of features that will make your printing process easier and faster. In this video, we'll show you some of the big, fast and material options that this printer can handle.
If you're looking for a printer that can handle big projects and fast printing speeds, the Creality K1 Max 3D printer is perfect for you! With its impressive features, you'll be able to get your projects done quickly and easily!
Creality K1 MAX 3D-Printer(From Creality) - bit.ly/Creality-K1-Max
Creality K1 MAX 3D-Printer(From Amazon) - amzn.to/45QKzjc
Creality K1 3D-Printer (From Creality) - bit.ly/Creality-K1-3D-Printer
Creality K1 3D-Printer (From Amazon) - amzn.to/3CXlrdT
Build Plate Upgrades for the Creality K1 MAX:
Creality K1 Max PEI Build Plate - amzn.to/3PjjW0N
Ender 3 S1 Plus PEI Build Plate (Should work with K1 Max) - amzn.to/3r22OmJ
Build Plate Upgrades for the Creality K1:
PEI Double Sided Magnetic Build Plate for K1 - amzn.to/449CVQq
PEI Printing Plate Kit With Cutouts like the Original - amzn.to/43bIgWb
Creality Ender-3 V3 SE ($200) - bit.ly/Ender-3-V3-SE
Hyper Series PLA - bit.ly/Hyper-Series-PLA
Textured PEI Sheet (With Notches) - amzn.to/44tlutr
Textured PEI Sheet (Without Notches) - amzn.to/3qQ4fVj
Filament Dryer / Dryer Box:
FIXDRY 2 Roll 3D Printer Filament Dryer - amzn.to/3M09sBL
JAYO 1 Roll Filament Dryer Box - amzn.to/3p9OyqN
3d Printer Filament That I Use:
ZIRO Starry Sky Gradient Twinkling PLA 1.75mm Filament - amzn.to/3rDotSs
PolyLite ABS - bit.ly/PolyLite-ABS
PolyLite ASA - bit.ly/PolyLite-ASA
PolyFlex TPU 95 (Flexable) - bit.ly/PolyFlex-TPU-95
PolyLite Silk PLA Blue - bit.ly/PolyLiteSilkPLABlue
NylonX Filament - bit.ly/MatterHackersNylonX
PolyTerra Marble PLA - bit.ly/PolyTerraMarblePLA
TECSONAR Tricolor PLA - amzn.to/3H79d5N
Build Series PLA - bit.ly/MatterHackersBuildSeri...
Build Series Silky PLA - bit.ly/BuildSeriesSilkyPLAMat...
Build Series ABS - bit.ly/MatterHackersBuildSeri...
Build Series PETG - bit.ly/MatterHackersBuildSeri...
PRO Series Filament - bit.ly/MatterHackersPROSeries...
Amazon 3D Printing Filament:
PLA - amzn.to/3gsLE9Z
PETG - amzn.to/3pXjjvu
ABS - amzn.to/3wsTRjS
ASA - amzn.to/2RX8dtM
Polycarbonate - amzn.to/3cLdr38
Nylon - amzn.to/3iNGeI2
________________________________________________
Note : Most of the links that I use that go to products are affiliate link. This means I make a small commission on anything that you happen buy using them. This is at no extra charge to you and this helps support the work I do on this channel. 😁👍
________________________________________________
#creality #crealityk1 #crealityk1max #3dPrinting #3dScanning #DIY #RandyMay - แนวปฏิบัติและการใช้ชีวิต
Creality K1 MAX 3D-Printer(From Creality) - bit.ly/Creality-K1-Max
Creality K1 MAX 3D-Printer(From Amazon) - amzn.to/45QKzjc
Creality K1 3D-Printer (From Creality) - bit.ly/Creality-K1-3D-Printer
Creality K1 3D-Printer (From Amazon) - amzn.to/3CXlrdT
Build Plate Upgrades for the Creality K1 MAX:
Creality K1 Max PEI Build Plate - amzn.to/3PjjW0N
Ender 3 S1 Plus PEI Build Plate (Should work with K1 Max) - amzn.to/3r22OmJ
Build Plate Upgrades for the Creality K1:
PEI Double Sided Magnetic Build Plate for K1 - amzn.to/449CVQq
PEI Printing Plate Kit With Cutouts like the Original - amzn.to/43bIgWb
Creality Ender-3 V3 SE ($200) - bit.ly/Ender-3-V3-SE
Hyper Series PLA - bit.ly/Hyper-Series-PLA
Textured PEI Sheet (With Notches) - amzn.to/44tlutr
Textured PEI Sheet (Without Notches) - amzn.to/3qQ4fVj
Filament Dryer / Dryer Box:
FIXDRY 2 Roll 3D Printer Filament Dryer - amzn.to/3M09sBL
JAYO 1 Roll Filament Dryer Box - amzn.to/3p9OyqN
3d Printer Filament That I Use:
PolyLite ABS - bit.ly/PolyLite-ABS
PolyLite ASA - bit.ly/PolyLite-ASA
PolyFlex TPU 95 (Flexable) - bit.ly/PolyFlex-TPU-95
PolyLite Silk PLA Blue - bit.ly/PolyLiteSilkPLABlue
NylonX Filament - bit.ly/MatterHackersNylonX
PolyTerra Marble PLA - bit.ly/PolyTerraMarblePLA
TECSONAR Tricolor PLA - amzn.to/3H79d5N
Build Series PLA - bit.ly/MatterHackersBuildSeriesPLA
Build Series Silky PLA - bit.ly/BuildSeriesSilkyPLAMatterHackers
Build Series ABS - bit.ly/MatterHackersBuildSeriesABS
Build Series PETG - bit.ly/MatterHackersBuildSeriesPETG
PRO Series Filament - bit.ly/MatterHackersPROSeriesFilament
Amazon 3D Printing Filament:
PLA - amzn.to/3gsLE9Z
PETG - amzn.to/3pXjjvu
ABS - amzn.to/3wsTRjS
ASA - amzn.to/2RX8dtM
Polycarbonate - amzn.to/3cLdr38
Nylon - amzn.to/3iNGeI2
________________________________________________
Note : Most of the links that I use that go to products are affiliate link. This means I make a small commission on anything that you happen buy using them. This is at no extra charge to you and this helps support the work I do on this channel. 😁👍
________________________________________________
#creality #crealityk1 #crealityk1max #3dPrinting #3dScanning #DIY #RandyMay
Just ordered the K1 Max through Best Buy for $699. Great deal with price matching from Micro Center. They said that it would come directly from Creality because Best Buy didn't have any in stock anywhere and they just partnered with Creality last month.
Oh very nice let me know what you get it and that you think
Short and to the point - thanks!
😁👍
Glad things are sorted on this machine. It really does LOOK super premium. Wonder if Creality will surprise us all with a multi material system at some point.
That would be really cool seeing the one on a X1C has been really nice to use.
My k1 max is just giving me problems on the extruder my filament keeps getting stuck in the extruder I'm printing with petg at 250 degrees
i have been trying to figure out good settings for creality print can you make a video on that?
Honestly anything I have printed on it have been using the default settings for whatever material I'm using so I wouldn't be the best to give out settings seeing that I haven't had to tune anything yet
K1 Max in U.S= $899.00
K1 Max in Brazil= $1,790.00
How fast were you printing?
I honestly didn't even check I was using the default print settings in Creality Print