Broo..Been hookin up music since i was a kid...THIS IS WHAT IT FEEL LIKE TO BEAT THE FINAL LEVEL...I LEARNED BIG TODAY... aint messed with my whip since the noise start...4months ago..THANKS MY GUY....YOU THE GOAT
just snip the black negative wire on the back of your radio and find a new good ground best is just to the negative of the battery with a 10a fuse . this is bad for the rca plugs. or snip yellow and black and hook them to the + - of the amp .
Dude, u saved the day! My bf spent countless hours, combing thru his newly installed system, regrounding EVERYTHING, and during a desperate youtube search, found ur video. He didnt think there was a chance in hell it would work, but he was out of ideas, and tried it. Virtually all of his distortion was GONE!!! THANK YOU SO MUCH! Gotta love hillbilly engineering!! Hey, it works!!!
If you guys are still having problems trying this disconnect the black ground wire on your aftermarket harness that connects to your aftermarket radio. Crimp a ring terminal on it and bolt it down to a bare piece of metal in the dash using an existing screw if able
I love you man. Almost got rid of my whole set up cause it wasn’t sounding right due to the buzzing. Now it’s so crisp Ct sounds 6.5 mid ct sounds 1400.1d on 0ga powering a kicker 12 l7 at 1 ohm
Hi man, when you say you can do that at the amp, do you mean wrap rca cable at the amp and attach to a ground? Because my amp is already grounded toshassy via the ground terminal, but assuming i need to gorund the rca on the amp also? Or will i just need to do the head unit?
I wrapped it around the male rca jack and put it in. The other end of the wire just kinda hung out like an antenna. Maybe 1-2 inch piece of speacker wire.
- Three rules to follow when installing a Car Audio System - #1 - Run your power wire on one side of your car & run your Subwoofer Amplifier's RCA Cable on the other side. #2 - Make sure you have a clean & tight ground connection on the frame of your vehicle. #3 - Make sure to ground your head-unit to the metal dash mounting bracket it is being mounted to with an extra wire, two small ring terminals, & two correct thread screws for the screw holes you choose to use on the back side of the head-units metal chassis. Do all these steps & you will not have any alternator wine & audio present threw your speakers & subwoofer.
Question... My radio buzzes intermittently on the passenger side of the vehicle. I have to pull the radio out then just put it back in and it's fine for a while. Would that be is losing ground or someone hooked it up wrong? Thanks
It did work but sounds like you have a bad solder joint inside your radio for the ground on the RCA or possibly more? Considering the wiring method it would have been interesting to have seen how you grounded the radio and the rest of the system.
Hey great video I have some problems but I have 18 Honda with stock stereo but I put amp mobo black amp n 3c12" mtx subwoofers can I do this inline RCA's cable just wrap around the rca n ground it I already wasted money on the rca inline filter garbage!!! Still hums every one says a bad ground but there good please help any help would be greatly appreciated thanks David
Also, it could be that one of your speakers that’s touching a metal frame so check that out too that none of your speakers are touching a metal frame because , if it’s making a buzz noise and you can’t hear music not even play music as soon as you turn on the radios start buzzing just make sure that your speakers are not touching up metal frame
Dam I just installed a new head unit and all new speakers all around and man that engine noise as I accelerate is driving me crazy, I have rca but I have nothing connected to them think if I wrap a wire around them and ground it will take the noise away? I hope so that noise drives me crazy
@@itsme2369 it won't go away because you have nothing plugged in to them! you need to disconnect the black wire going to your head unit and put a ring terminal on it and bolt it down to a screw in the dash. this doesn't help you are going to have to try a different head unit
Excellent job....I give you 10/10 for solving the problem. But I give you 2/10 for preparation, scripting, and camerawork! Keep on keeping on- you are a ⭐️
Great demonstration. I feel like my annoying sound is coming from the head unit display screen itself. Would this fix or is this only for your speakers squeeling?
I can’t wait to try this. My ex put my radio in and now I hear an annoying ringing in the radio every time I hit the brake. I don’t understand why it affects the radio but it makes it so o don’t listen to it anymore
i think i have the same problem with sock head unit. i notice it after i installed a amp to my aftermarket speakers and the hisssssing sound got louder with the amp. imma try this method and see if the hissing sound goes way. ive tried everything even buying a lc2i and nope ;hissing still there. gain set all goood ,so it has to be headunit.
I have a buzzing noice in a speaker but next to my rear door second row back behind i drive. when i took the cover out i hold the speaker and the noise stops then comes back.
I just installed speakers, amp and sub to my factory head unit with an LOC in a 2016 Canyon and had 2 noises. One rpm related and the other just a constant buzz. I moved the amp ground and the rpm noise went away but the constant buzz is still there. Do you have Any idea what I should check now?
@@markpotter2485 just solved mine! Ground the RCA to some ground. Problem solved, a cable round one of the terminals and ground should be all you need.
i just find out that my car stereo doesn't have the those 2 wires. however, i pulled the antenna wire out and the whinning sound was gone, but after i start the car, it came back. IDK wtf to do as i am so annoyed from this sound.
@@jride8645 did tha dealership fix it ? Or can they fix I have a 2000 Cadillac escalade I'm having this same problem I'm thinking about taking it to GM or Cadillac dealership
This never worked and I took my ground wire and put it to the chassis too still sound buzzing an alternator wine it's not my RCA cables my four channel amp doesn't buzz when I use my phone to it instead of the head unit it makes the noise if the engine is on and when the engine's off
He may have shitty Walmart RCA's but some radios especially Pioneer single din radios will do this no matter what you upgrade . Trust me I know I've been through it. grounding the RCA jacks is literally the only thing that works on some of these radios
Before you do anything plug your phone or iPod directly into your amplifier skipping your radio. If it's buzzing still probably a groundloop, from a terrible ground. Don't be like me as a kid and wrap my amplifier ground wire around a trunk latch. find a good point in the trunk sanded down to bare metal and bolt it down using Ring terminal. If you can't find an existing bolt then don't use fewer than 2or three self tapping screws right through the ring terminal.
Broo..Been hookin up music since i was a kid...THIS IS WHAT IT FEEL LIKE TO BEAT THE FINAL LEVEL...I LEARNED BIG TODAY... aint messed with my whip since the noise start...4months ago..THANKS MY GUY....YOU THE GOAT
Goat go to? Bahhhhh
just snip the black negative wire on the back of your radio and find a new good ground best is just to the negative of the battery with a 10a fuse . this is bad for the rca plugs. or snip yellow and black and hook them to the + - of the amp .
What bro said appreciate it my guy
Dude, u saved the day! My bf spent countless hours, combing thru his newly installed system, regrounding EVERYTHING, and during a desperate youtube search, found ur video. He didnt think there was a chance in hell it would work, but he was out of ideas, and tried it. Virtually all of his distortion was GONE!!! THANK YOU SO MUCH! Gotta love hillbilly engineering!! Hey, it works!!!
I was just in the same boat just found this video
You saved my day brother, thank you
If you guys are still having problems trying this disconnect the black ground wire on your aftermarket harness that connects to your aftermarket radio. Crimp a ring terminal on it and bolt it down to a bare piece of metal in the dash using an existing screw if able
You’re the only other person I’ve heard listening to D12 apart from myself! Thanks for the video
You just saved me 10 bucks for new rca wires! I did this trick and thought I blew my amp or something because I didn’t hear the humm lol
I love you man. Almost got rid of my whole set up cause it wasn’t sounding right due to the buzzing. Now it’s so crisp Ct sounds 6.5 mid ct sounds 1400.1d on 0ga powering a kicker 12 l7 at 1 ohm
Man that's old school right there. I did that in the 90s. You can also do it at the Amp. It's easier to get to than pulling out the radio. Good job!
Hi man, when you say you can do that at the amp, do you mean wrap rca cable at the amp and attach to a ground?
Because my amp is already grounded toshassy via the ground terminal, but assuming i need to gorund the rca on the amp also? Or will i just need to do the head unit?
I tried it at the amp and it made my speakers stop playing when I had the wire wrapped around it
I wrapped it around the male rca jack and put it in. The other end of the wire just kinda hung out like an antenna. Maybe 1-2 inch piece of speacker wire.
@@mstabig9519 and this is at the amp? Not the radio
Correct
IT WORKED!!! I appreciate your video. I was "suffering" for so long lol
- Three rules to follow when installing a Car Audio System -
#1 - Run your power wire on one side of your car & run your Subwoofer Amplifier's RCA Cable on the other side.
#2 - Make sure you have a clean & tight ground connection on the frame of your vehicle.
#3 - Make sure to ground your head-unit to the metal dash mounting bracket it is being mounted to with an extra wire, two small ring terminals, & two correct thread screws for the screw holes you choose to use on the back side of the head-units metal chassis.
Do all these steps & you will not have any alternator wine & audio present threw your speakers & subwoofer.
Question... My radio buzzes intermittently on the passenger side of the vehicle. I have to pull the radio out then just put it back in and it's fine for a while. Would that be is losing ground or someone hooked it up wrong? Thanks
Really didn’t think this would work but it did ! Thanks man
Wonderful video, was able to fix my issue with some spare wire and some solder. Thanks
Thank you so much. I was ready to smash the stereo into pieces!! Works a treat!!!
That is crazy sir! I can’t wait to fix this annoying problem. Thanks!!
Thanks Eddie, I will try this with my cheap 15 usd radio and see if that works. Life saver.
Thanks this actually worked after what felt like forever the noise is finally gone
It did work but sounds like you have a bad solder joint inside your radio for the ground on the RCA or possibly more? Considering the wiring method it would have been interesting to have seen how you grounded the radio and the rest of the system.
Thank you! Easiest tutorial on TH-cam for ground loops
Bro you freaking rock my stereo been making me crazy put new amp and wake tower speakers in my wrangler and got crazy noise hope this works for me
Can you do the same trick with the RCA input at the amplifier where to me is easily accessible instead of at the radio?
just like magic great vid big big brain man thanks
Hey great video I have some problems but I have 18 Honda with stock stereo but I put amp mobo black amp n 3c12" mtx subwoofers can I do this inline RCA's cable just wrap around the rca n ground it I already wasted money on the rca inline filter garbage!!! Still hums every one says a bad ground but there good please help any help would be greatly appreciated thanks David
Also, it could be that one of your speakers that’s touching a metal frame so check that out too that none of your speakers are touching a metal frame because , if it’s making a buzz noise and you can’t hear music not even play music as soon as you turn on the radios start buzzing just make sure that your speakers are not touching up metal frame
Gonna give this a go in the morning, prey it works! that hum been driving me nuts for a year now 😂😢
Definitely going to try this. Thanks man.
This absolutely helped me. Thank you so much for this!
Damn i got my RCA coming from a DSP so what i ground that off ?
Wowwww! Best video out there! Thank you ❤️
easy and straight to the point! Thanks man
So....what do u do if your head unit doesn't have RCA's?
Thanks for the video man! I just installed my amp and was having this issue
How do you stop the loud pop when the car goes off?
Thanks Buddy YOU SAVED MY DAY....,,👍👍
Work like a charm , thanks bro ❤️ & ✌🏾
Thank you so much brother you save my time
Bro this is amazing!!! I cant wait to do this tomorrow
Dam I just installed a new head unit and all new speakers all around and man that engine noise as I accelerate is driving me crazy, I have rca but I have nothing connected to them think if I wrap a wire around them and ground it will take the noise away? I hope so that noise drives me crazy
Dam my sound didn't go away and I wrapped a copper wife around the RCA, I have no amp Just a head unit with new speakers
@@itsme2369 it won't go away because you have nothing plugged in to them! you need to disconnect the black wire going to your head unit and put a ring terminal on it and bolt it down to a screw in the dash. this doesn't help you are going to have to try a different head unit
He said : I want some pig feet !
She said: with a laugh No!
Excellent job....I give you 10/10 for solving the problem. But I give you 2/10 for preparation, scripting, and camerawork! Keep on keeping on- you are a ⭐️
Bro, ur a life saver thanks 👑
Thanks bro your fucking badass , been pulling my hair out for last 3hours
mine is aftermarket and the voice goes louder when i press more petrol ... Do you think this woul fix this issue ??
should it be connected to one pole only? or it should be both?
I have buzz only when my radio off and amp is on
What do you think that is
Its nothing like this no buzzing when there both on
Need bigger engine/chassis ground wire, better RCA cable. Keep power away from inducting current to RCA's👌
Some head units like Pioneer Single din radios will do this no matter what you upgrade and you have to do this method
Yeah...but what do u do when your head unit doesn't have RCA's?
You sir, are a boss. Thank you!
can I do it from a EQ?
Gonna try this tomorow hope this works ill be so happy Thanks
Rizwan Mohammed did it? Ima try it tomorrow lol
@@famousps1 did it? I'm gonna try It tomorrow.
Great solution, worked, thank you for upload.
Great demonstration. I feel like my annoying sound is coming from the head unit display screen itself. Would this fix or is this only for your speakers squeeling?
Same with mine..did you fix it?
Great tip a real money saver thanks 👍
thanks you. you save my life☺
Your a life saver my dude!
Life saver my guy thank you so much!!!
My RCA is not used but will it still work if I put wire into it
Did not work for me unfortunately try all the RSAS ended up looking like an IED
What worked for u?
@@brycemcmullen4828 removed the equilizer then and adjusted the amp a bit the levels
0:46
can you do the same thing but just to the amp so you dont have to take off
your console
This helped out so much. Thanks
Dude you are a fricken Genius
Did this still have the same noise even tried moving the ground but for some reason my ground is in the antenna idk why
I tried exactly same but didn't work. What else should I try??
Does it matter witch rca cable it is
Does it work on either one
Just hook a wire to a ground and test it while its on to any rca cable whichever one works do it to that one
Its ok for use?
I can’t wait to try this. My ex put my radio in and now I hear an annoying ringing in the radio every time I hit the brake. I don’t understand why it affects the radio but it makes it so o don’t listen to it anymore
i think i have the same problem with sock head unit. i notice it after i installed a amp to my aftermarket speakers and the hisssssing sound got louder with the amp. imma try this method and see if the hissing sound goes way. ive tried everything even buying a lc2i and nope ;hissing still there. gain set all goood ,so it has to be headunit.
I'm using high level plug how to fux this problem??
Get this man to 1mil
What if I have this issue without a amp and sub?
Thank you I try it an it work
Thanks man. Really help me out
What if you’re using a stock radio?
Thanks dude it works! 👍👍
I only get it when my headlights are on!
What should I do?
I have a buzzing noice in a speaker but next to my rear door second row back behind i drive. when i took the cover out i hold the speaker and the noise stops then comes back.
I just installed speakers, amp and sub to my factory head unit with an LOC in a 2016 Canyon and had 2 noises. One rpm related and the other just a constant buzz. I moved the amp ground and the rpm noise went away but the constant buzz is still there. Do you have Any idea what I should check now?
I have the same issue! Were you able to fix it?
@@javiernaranjo5187 No, not yet. Been working out of town and havent tried yet.
@@markpotter2485 just solved mine! Ground the RCA to some ground. Problem solved, a cable round one of the terminals and ground should be all you need.
THANK YOU SO MUCH!!!
Yesssss thanks big time for the vid ❤
i just find out that my car stereo doesn't have the those 2 wires. however, i pulled the antenna wire out and the whinning sound was gone, but after i start the car, it came back. IDK wtf to do as i am so annoyed from this sound.
Going to try this asap, i get anoying buzz that increases the faster the car goes (??)
Me too. It happened after I left the dealership for routine maintenance.
Did it work?
@@jride8645 did tha dealership fix it ? Or can they fix I have a 2000 Cadillac escalade I'm having this same problem I'm thinking about taking it to GM or Cadillac dealership
Thanks brother 🤙🏽
i tried this and didn’t work i used small speaker wire and did exactly what u did and i still have static and buzzing sound,what else can i do
ur a legend bro! thank u
Whats the name of the eminem song that was playin in the begining of the video,n thanks bro the trick worked for my stereo
It’s from d12 album
Pistol pistol d12
This never worked and I took my ground wire and put it to the chassis too still sound buzzing an alternator wine it's not my RCA cables my four channel amp doesn't buzz when I use my phone to it instead of the head unit it makes the noise if the engine is on and when the engine's off
Thank you for this info.
Thanks for this info
WOW THAT'S AMAZING
Thanks
Bravo and Thank you
so simple. Tysm
Thanks brother
Awesome thanks!
Thank you!
Lol just like that instead of buying all those expensive shit just 1 simple wire and done
Phuckin' ay ,man, thanks.
Worked for me solid
Genius
Or you could just buy a set of Good RCA cables and not just bandaid your work although it’s not your fault it’s the shitty Walmart rca you have there
He may have shitty Walmart RCA's but some radios especially Pioneer single din radios will do this no matter what you upgrade . Trust me I know I've been through it. grounding the RCA jacks is literally the only thing that works on some of these radios
Does anybody know why my bass starts bussing like crazy when I raise the volume up?
Before you do anything plug your phone or iPod directly into your amplifier skipping your radio. If it's buzzing still probably a groundloop, from a terrible ground. Don't be like me as a kid and wrap my amplifier ground wire around a trunk latch. find a good point in the trunk sanded down to bare metal and bolt it down using Ring terminal. If you can't find an existing bolt then don't use fewer than 2or three self tapping screws right through the ring terminal.
It didn’t work for me unless I did it wrong