Dude I never comment on youtube videos think maybe 3 in my life but I did the wire around rca on amp to ground boom hum I literally rewired almost everything bout to give up untill I stumbled on ya vid can't tell u how much I appreciate I ever subscribe to ya channel thanks again man
Adam Francis, I was getting crazy with my issue, every time I pop up the subwoofer gain way more than a half the hum vibrates my subs so bad, and I just weld a cable to the RCA plug that goes to my mono amp, and boom, no more whine and hum noises, excellent video thanks for the tips, I have already did it to my car stereo, I weld the RCA cables to the chasis it worked but was back again, thanks mate, you deserve these ⭐⭐⭐⭐⭐
You're life saver. I have 2amp setup in my car and humming seems to come from sub amp, so I was thinking its broken and was about to buy a new one🤦♂️, will try these fixes first. Cheers
@@cxsper6111 I later found out that issue is rca cables and speaker amp being turned all the way up. I resolve it with jl audio Bluetooth receiver which eliminates need of long rca cables and also gives strong signal so I can turn down amp gain.
Hello... I'm from Mizoram State in the far North Eastern area of India. It's great to hear the way you explained the whole lot, which is just what I've been expecting for the last past couple of years. It's really perfect for my liking. You've brought me success. May the Good Lord bless you always in all your needs.
I tried it on mine, it changed the frequency of the hum, but it was still there. I noticed it after I replaced my rear speakers, it was very, very faint, however I bought a small amp .... which amplified it. My car's stereo controls the climate settings, and also the cruise control, I can't really remove the stereo without losing features, so I added a Kicker kisloc2 which is working, but it still amplifies the hum even on the lowest possible gain setting ... People online mentioned the day time running lights will cause a buzz with after market amps, which it did (when the car was both off, and on) I removed the fuse, and the sound went away with car off, however while on it still hums, this was worth the effort to try, I just don't know what to do now, it had some effect but the sound went from one constant tone, to like 3-4 different tones at once oddly enough. Wasn't any quieter, but I really wasn't expecting this to work for me, as I think it's my cars preamp ... beside ferrite rings I'm not sure what to try =/ Guess this is what I get for trying to do something nice for myself, speakers, wiring kit, amp, loc and it's only gotten worse now lol
This is the best vid on the subject, period. I'm about to crack open a brand new amp for the same fix. Why have manufacturers not figured this out and continue to sell them when clearly there's an issue? Does it have to do with floating ground on the RCA's?
bro out of most of the videos on youtube about this issue ,you nailed it..simple and direct and not gonna break my bank....no purchase..no software download..lol..easy peasy..and yes this did work..I also have a line out converter..whats your thought on sub jacks..the aux jacks for youe subs i8 ment..do i go standard or braided and does material efect powert?
I have set up an car amplifier for my TV at home. Recently i got noticed a Buzz sound from speakers not from subwoofer. Previously it was not there. I would like to know how your car amplifier had set up for remote cable for "ON" indication. Are you connected with a small wire from 12v to remote. For me it is 12vdc 30A power source. So I used around 20awg wire for this. I don't know this makes anything noise.
I tested a 3.5 mm to rca on my amp and it didnt hum but when used with head unit it will hum. Does that mean i need new headunit? I have hook up a rca bass knob too and when i turn the knob up without anything playing, the hum lowers
I have a 2005 F-150 Lariat with a stock amp and sub and I can not get rid of the humming after installing an aftermarket radio. I tried grounding the RCAs on the back of the radio and it did not work. I tried grounding the amp wire hardness at the radio, it did not work. My issue is that the amp is wired to the sub with a wire harness, not RCA cables. Any suggestions?
I have a NVX 1500 wired up to 2 SDR 12s and when I turn the bass knob up and there's no music its just a quiet hum. Everything is grounded good, power wire is good the 2nd battery is good everything is fine so I'm confused. Is it my RCAs or my LOC? Or maybe the remote wire I'm not sure what the check cause everything works good just annoying might just have to get used to it...
I've found the culprit is my surround amp. Using a car sub amp and pc power supply. Works perfect with rca to phono to phone but get hum and no bass when connecting to surround amoy
@@PacmanBasshead I thought you three methods were going to be.. 1.. kick the headunit over next doors fence. 2.. Frisby the amp over next doors fence. 3.. burn the car and run away. Lolol xx
I got a stetsom 8k valcan amp and its been makeing that sound form day one ..i tryed grounding the headunit ,,dident work ,,then i grounded the rca on the amp and the subs went crazzy ,,started popping hard ,and the sound was like a cat beeing ran over . I dont want to ground wire it on the inside on the amp ,i will mess it up !..what can i do to make this stop ? It is grounded good to the frame under the car and i tryed grounding it to tje alternator and it still didn't work ...... help please!
Old video, but worth a shot. Would it be possible that the rca port *ground wire* on the amp (witch connects to the board within the amp) could have broken at the soldier point?.. Tried sub, and mids on both channels and always a hum. Until I cut remote power. No power wire crossing rca or speakers. Power straight up driver side and speakers/rca's up passenger side. *wires do not cross* Been playing to long Ready to rip it apart now. Also While I'm writing a story. 😂.. Got a alpine 500 mono block. Powers up, but no sound to tye speakers. Speakers work on different amp.
Make terrible noise while Running song in car, I think it because of some audio line freq in song, like something in bass I think it can't play the specific sound in song. Please help
I was thinking I needed to apply the OLD blown pico ground trick. I have a buzz in a used amp that I bought for a good deal on eBay and i think i might have to try this fix and save $279. I know it is the amp because my first identical amp work fine with my source and power supply. I was told to also test with a battery because power supplies can cause buzzing (according to Rockford Fosgate customer support, but not in my case).
Update it was the old HU. But my RCAs are not in that style they are in a harness. Grounded those and it was good. Time to upgrade the test bench source HU.
any advice on an active sub that makes a hum but only when engine is running. Head unit is a ford 6000CD and bass speaker is an 30 year old tube that had been retired and sitting in my garage and have handed it down to my son :-) Whilst on the subject of the ford 6000CD is it worth changing that out or is it not too bad as a headunit? Thanks in advance. ****UPDATE** changed out the headunit a friend had an aftermarket one and the hum went without changing anything but the headunit and it sounded better so think case solved
I I have I have a question to ask you what if you're using your stock radio and running the amp to the little converter box to give you the bass because that is what I did to my girlfriend's car I ran the stock radio and the converter and I still get the hum I try several different ground spots but seems like nothing is working I haven't tried your idea yet but I am going to do that but I didn't know if you can do it with the stock radio this is in a 2008 Honda pilot by the way please respond as soon as possible if possible thank you and have a good day
I’m using a stock radio with an LC2i loc and my system has a buzzing noise in it. And the whine increases when the rpms increase. Should I wrap wire around the outputs of the LC2i and try to ground them?
Alright. So I went through the process just like I would for finding a short. disconnect the HU plug. Still noise. 2. disconnect the highs amp power. still. 3. disconnect RCAs from mids and high amps. still. 4. measure V drop of mids amp. fine. 5. disconnect mids ground connection. still. 6. disconnect mids power. still. 7. measure Ohm of all grounds to batt and ground to amp frames. OK. 8. disconnect mids front speaker outputs. still. 9. pull out the front crossovers. disconnect power input. still. 10. disconnect crossover speaker outputs. NOISE STOPS. Ta da. 11. check front speakers for short to ground. OK. 12. reconnect crossover speaker outputs: NOISE RETURNS. 13. Presume interference. Relocate crossover to different positions: TA DA. It turned out that the Morel crossovers are sensitive to interference. They can't be even 8 inches near any power junctions/ECU/etc. So, I relocated them to under the floor carpet in the front where people usually don't put their feet. Noise gone.
Hello, Maybe you can help me find a solution to my subwoofer that is huming. 1. Conected to the amplifier an using CD line input, the sub is huming. Switching to other inputs also hums. Switching to optical or coaxial the hum stops. 2. The subwoofer is conected to the power source and disconected from the amplifier but the other end of the subwoofer cabel is conected to the subwoofer input, the subwoofer is huming. If I take out the cable from the subwoofer, the huming stops. You need to put your ear on the subwoofer and focus to hear very low hum. If I connect again the cable just to the subwoofer input (disconnected from aplifier) the huming reapears. 3. I connected the subwoofer to a different power source and it hums. Please help me with advices.
Most likely because the line input is an unbalanced cable so the humming from its power source is present. Optical and spdif are digital so they are different. Try a ground loop isolator or the second method in this video.
Have the common 60hz sub hum from a Klipsch 2.1 Promedia computer speakers. Sound great but built like crap. Annoying as F! Used your basic idea of grounding the controller interface by taking a small wire and looping it around the 12 pin interface on the back of the sub and running it over to one of the screws on the metal backplate. Seemed to work! Thanks!
In all honesty, I don't know enough about home theatre to give you a good response, try and check continuity between a working home theatre amp RCA shield and ground, if there is ground there then try it on your home amp, however. Be careful. You're playing with much bigger voltages there so unplug and use ppe. Your home amp will also have a ground inside it somewhere. Just as a disclaimer, I have not tried this so am unsure if it works!
Why when I hook my subs into my 300 the constantly hit hard asf with no music playing. The second I hooked eveything and connected my subs to the amp they instantly started hitting hard asf with 0 audio coming from the car itself
I tried this to no avail, but i did notice that the hum is still there after disconnecting both rca cables leading to the head unit. Should i try grounding the cables that lead from the amp to the sub instead?
Absolutely not, thats a fast way to mess everything up. Sounds like your amps power or ground cable has an issue to me. Redo your main ground, or check it.
@PacmanBasshead I redid the ground and connected everything besides the rca cables. Turns out that the hum goes away when I remove the incoming single wire. Maybe the amp is fried?
@markopolo7651 those things are a bitch! Easiest fix for that is to remove the amp from the car entirely, let it discharge overnight, get some 99% isopropyl alcohol and spray it into the switch, toggle it back and forth (literally) 100 times. After 5 mins the alcohol will have evaporated and youll be good to go
Instantly fixed my problem. If your problem changes pitch with RPMs this is your fix!!
Dude I never comment on youtube videos think maybe 3 in my life but I did the wire around rca on amp to ground boom hum I literally rewired almost everything bout to give up untill I stumbled on ya vid can't tell u how much I appreciate I ever subscribe to ya channel thanks again man
great tip. Makes you wonder why manufacturers don't include this little piece of wire from the factory
Thanks for this tutorial! Straight and to the point you helped me troubleshoot & quickly fix the very loud feedback coming from my JL Audio 500/1 amp.
Great video, didn't even cross my mind to use a wire like that. Saved me a lot of time. Thank you!
I watch alot of videos on this, I understood yours the most. Helpful fixed a 2day nightmare. Thank you!
Thank you. I RCA to ground on the amplifier route. Seemed to work ...will fully test tomorrow. saved me a bit of money
Adam Francis, I was getting crazy with my issue, every time I pop up the subwoofer gain way more than a half the hum vibrates my subs so bad, and I just weld a cable to the RCA plug that goes to my mono amp, and boom, no more whine and hum noises, excellent video thanks for the tips, I have already did it to my car stereo, I weld the RCA cables to the chasis it worked but was back again, thanks mate, you deserve these ⭐⭐⭐⭐⭐
dude thaaaankkkk youuuu sooo much, you have no idea what i've been thru until i saw your video. you are a life saver.god bless you
I just bought a brand new scar amp and it’s been humming with no sound the ground trick worked thank you so much
Thanks, mate. Everyone shows doing it on the head unit you are the first showing on the amp. Tried it and it's been a week and so far all is good.
Dude you are definitely the greatest help ever
3:06 That giggity was so unexpected 😂
You're life saver. I have 2amp setup in my car and humming seems to come from sub amp, so I was thinking its broken and was about to buy a new one🤦♂️, will try these fixes first. Cheers
Did it fix the problem? Have the same issue haha
@@cxsper6111 I later found out that issue is rca cables and speaker amp being turned all the way up. I resolve it with jl audio Bluetooth receiver which eliminates need of long rca cables and also gives strong signal so I can turn down amp gain.
Hello...
I'm from Mizoram State in the far North Eastern area of India.
It's great to hear the way you explained the whole lot, which is just what I've been expecting for the last past couple of years.
It's really perfect for my liking.
You've brought me success.
May the Good Lord bless you always in all your needs.
Hell yea
Many thanks!! This, once again was the solution to my hum lol
I tried it on mine, it changed the frequency of the hum, but it was still there. I noticed it after I replaced my rear speakers, it was very, very faint, however I bought a small amp .... which amplified it.
My car's stereo controls the climate settings, and also the cruise control, I can't really remove the stereo without losing features, so I added a Kicker kisloc2 which is working, but it still amplifies the hum even on the lowest possible gain setting ...
People online mentioned the day time running lights will cause a buzz with after market amps, which it did (when the car was both off, and on) I removed the fuse, and the sound went away with car off, however while on it still hums, this was worth the effort to try, I just don't know what to do now, it had some effect but the sound went from one constant tone, to like 3-4 different tones at once oddly enough.
Wasn't any quieter, but I really wasn't expecting this to work for me, as I think it's my cars preamp ... beside ferrite rings I'm not sure what to try =/
Guess this is what I get for trying to do something nice for myself, speakers, wiring kit, amp, loc and it's only gotten worse now lol
Thanks a lot you helped me fix my issue it was a grounding problem.
To the point and very well briefed 👍🏻
Thanks for this! Been bugging me for ages
I loved the whole video lmao! You’re a funny guy 🙌🏻😂
Cheers man, appreciated! What can I say, I'm just an tit generally 😂😂.
wicked vids as always, quick tip when your soldering wires together like that try twist them together first makes easy work soldering them
Thanks for the tip that was driving me crazy
Thank you ....well explained helped me a lot
You saved my life! Thanks 👍🏻
Bro I love it . The giggity is exactly what I do when I have audio awesomenessess happen 😂
Thanks for the video my amp was driving me crazy
Glad it helped 😊
This is the best vid on the subject, period. I'm about to crack open a brand new amp for the same fix. Why have manufacturers not figured this out and continue to sell them when clearly there's an issue? Does it have to do with floating ground on the RCA's?
You just helped me out hella man thanks so much
What about it's a humming noise what gets worse when the engine is running?
What about it's humming noise What gets worse when the engine is running ?
Change Your Alternator ✅
Videos like this is what youtube is made for.
I appreciate that mate 😊
bro out of most of the videos on youtube about this issue ,you nailed it..simple and direct and not gonna break my bank....no purchase..no software download..lol..easy peasy..and yes this did work..I also have a line out converter..whats your thought on sub jacks..the aux jacks for youe subs i8 ment..do i go standard or braided and does material efect powert?
Thank You Bro
It worked for me ♥️
Enjoyed the its Sunday so feck off bit. Cheers from this side of the pond! Liked and Subbed.
Just clicked on the video seeing Quagmire in the thumbnail. It turned out a great video.
I have set up an car amplifier for my TV at home. Recently i got noticed a Buzz sound from speakers not from subwoofer. Previously it was not there.
I would like to know how your car amplifier had set up for remote cable for "ON" indication. Are you connected with a small wire from 12v to remote. For me it is 12vdc 30A power source. So I used around 20awg wire for this. I don't know this makes anything noise.
Any idea on how to deal with pin connectors? I mean doing the number 8 wrap around thing.
Thx alot its working for me 😍😍❤️
Nice video, i bought two rythmik L12 subwoofers recently, i can hear them about 2 metres away when the room is quiet, not sure what to do, any ideas?
Thanks bruv 🙏🙏 saved my ass I thought it was gonna be more serious
Thanks man I thought I had to take the amp to the shop to get fixed saved me money and time
Respect brother 🙏👍
I'm fixing mine today. Thanks.
You're welcome 😊
I tested a 3.5 mm to rca on my amp and it didnt hum but when used with head unit it will hum. Does that mean i need new headunit? I have hook up a rca bass knob too and when i turn the knob up without anything playing, the hum lowers
I have a 2005 F-150 Lariat with a stock amp and sub and I can not get rid of the humming after installing an aftermarket radio. I tried grounding the RCAs on the back of the radio and it did not work. I tried grounding the amp wire hardness at the radio, it did not work. My issue is that the amp is wired to the sub with a wire harness, not RCA cables. Any suggestions?
Great video.
I have a NVX 1500 wired up to 2 SDR 12s and when I turn the bass knob up and there's no music its just a quiet hum. Everything is grounded good, power wire is good the 2nd battery is good everything is fine so I'm confused. Is it my RCAs or my LOC? Or maybe the remote wire I'm not sure what the check cause everything works good just annoying might just have to get used to it...
I can't remove my stereo. Can I connect outer connector of RCA input to amp with amp body with wire ? Will this solve alternator whine noise?
thank you for the info :)
I've found the culprit is my surround amp. Using a car sub amp and pc power supply. Works perfect with rca to phono to phone but get hum and no bass when connecting to surround amoy
What do you do with the end piece at 2:35?
Dude man dude where were you years ago lol am happy ass hell them filters didn't work for me thanks boss 👊🏿🍻💯
Those filters are a load of shit buddy, it's the same thing! Glad you're all sorted 😊.
@@PacmanBasshead lol exactly 💯🤣
My phone is buzzing while you do this 😂
Nice 😂😂
very good !
Nice one bro that's smart 😎🤘🏻
Cheers bru, always here to spread the knowledge ☺️
Nicely done dude! Xx
Cheers brudda! Appreciate you always commenting!
@@PacmanBasshead I thought you three methods were going to be.. 1.. kick the headunit over next doors fence.
2.. Frisby the amp over next doors fence.
3.. burn the car and run away.
Lolol xx
@@proffessasvids I can't put that on the internet sadly 😂😂
Hello how come my amp loses like half its power when I do the first method? But it does take away the humming noise 2:04
Thanks mate, saved me from buying a new amp
I got a stetsom 8k valcan amp and its been makeing that sound form day one ..i tryed grounding the headunit ,,dident work ,,then i grounded the rca on the amp and the subs went crazzy ,,started popping hard ,and the sound was like a cat beeing ran over .
I dont want to ground wire it on the inside on the amp ,i will mess it up !..what can i do to make this stop ?
It is grounded good to the frame under the car and i tryed grounding it to tje alternator and it still didn't work ...... help please!
thanx...million brother.... ^ ^
Thank you
Life saver video
Old video, but worth a shot.
Would it be possible that the rca port *ground wire* on the amp (witch connects to the board within the amp) could have broken at the soldier point?..
Tried sub, and mids on both channels and always a hum. Until I cut remote power.
No power wire crossing rca or speakers.
Power straight up driver side and speakers/rca's up passenger side.
*wires do not cross*
Been playing to long
Ready to rip it apart now.
Also
While I'm writing a story. 😂..
Got a alpine 500 mono block. Powers up, but no sound to tye speakers. Speakers work on different amp.
How could i deal with Head Unit which does not has RAC output?
Thank you very much man
More than welcome 😊
Whats the model of the amp???
Make terrible noise while Running song in car, I think it because of some audio line freq in song, like something in bass
I think it can't play the specific sound in song. Please help
I was thinking I needed to apply the OLD blown pico ground trick. I have a buzz in a used amp that I bought for a good deal on eBay and i think i might have to try this fix and save $279. I know it is the amp because my first identical amp work fine with my source and power supply. I was told to also test with a battery because power supplies can cause buzzing (according to Rockford Fosgate customer support, but not in my case).
Update it was the old HU. But my RCAs are not in that style they are in a harness. Grounded those and it was good. Time to upgrade the test bench source HU.
any advice on an active sub that makes a hum but only when engine is running. Head unit is a ford 6000CD and bass speaker is an 30 year old tube that had been retired and sitting in my garage and have handed it down to my son :-) Whilst on the subject of the ford 6000CD is it worth changing that out or is it not too bad as a headunit? Thanks in advance.
****UPDATE** changed out the headunit a friend had an aftermarket one and the hum went without changing anything but the headunit and it sounded better so think case solved
Should add as well that the sub just takes the speaker level positives from the left and right front outputs from the headunit with no negatives
I I have I have a question to ask you what if you're using your stock radio and running the amp to the little converter box to give you the bass because that is what I did to my girlfriend's car I ran the stock radio and the converter and I still get the hum I try several different ground spots but seems like nothing is working I haven't tried your idea yet but I am going to do that but I didn't know if you can do it with the stock radio this is in a 2008 Honda pilot by the way please respond as soon as possible if possible thank you and have a good day
Yeah no problems, just use the rca shield on the output 😊
It works thanks so much
You are welcome 😊
Great.
Hey i have a question. I am trying to wire a amp outside of the car to have it inside of the house but i don't know how to wire it.
And every time I try to connect the battery to it the fuse blows and i have gone through 10 fuses
Thank You! GiGGiTY!
What if I get this without any inputs connected to my amp
I’m using a stock radio with an LC2i loc and my system has a buzzing noise in it. And the whine increases when the rpms increase. Should I wrap wire around the outputs of the LC2i and try to ground them?
Im having the same issue
Check your alternator you probably pushing too much power and I’m sure you already solved the issue, if you did what did it end up being?
I got 4channel …have to cover all 4 or 2 at a time with the wire?
Each 2 channels runs off a different preamp board, so do all of them
Love from Pakistan
Alright. So I went through the process just like I would for finding a short. disconnect the HU plug. Still noise. 2. disconnect the highs amp power. still. 3. disconnect RCAs from mids and high amps. still. 4. measure V drop of mids amp. fine. 5. disconnect mids ground connection. still. 6. disconnect mids power. still. 7. measure Ohm of all grounds to batt and ground to amp frames. OK. 8. disconnect mids front speaker outputs. still. 9. pull out the front crossovers. disconnect power input. still. 10. disconnect crossover speaker outputs. NOISE STOPS. Ta da.
11. check front speakers for short to ground. OK. 12. reconnect crossover speaker outputs: NOISE RETURNS. 13. Presume interference. Relocate crossover to different positions: TA DA.
It turned out that the Morel crossovers are sensitive to interference. They can't be even 8 inches near any power junctions/ECU/etc. So, I relocated them to under the floor carpet in the front where people usually don't put their feet. Noise gone.
Hello,
Maybe you can help me find a solution to my subwoofer that is huming.
1. Conected to the amplifier an using CD line input, the sub is huming. Switching to other inputs also hums. Switching to optical or coaxial the hum stops.
2. The subwoofer is conected to the power source and disconected from the amplifier but the other end of the subwoofer cabel is conected to the subwoofer input, the subwoofer is huming. If I take out the cable from the subwoofer, the huming stops. You need to put your ear on the subwoofer and focus to hear very low hum. If I connect again the cable just to the subwoofer input (disconnected from aplifier) the huming reapears.
3. I connected the subwoofer to a different power source and it hums. Please help me with advices.
Most likely because the line input is an unbalanced cable so the humming from its power source is present. Optical and spdif are digital so they are different. Try a ground loop isolator or the second method in this video.
Richard nongbet, Thanks help me . One think connect tweeter high frequency levels.
Plz help me .
My man said Giggidy😂😂😂😂
Giggity giggity giga dee
a sub can hum from a ground loop, generally the most common reason
I love you 😘
Have the common 60hz sub hum from a Klipsch 2.1 Promedia computer speakers. Sound great but built like crap. Annoying as F! Used your basic idea of grounding the controller interface by taking a small wire and looping it around the 12 pin interface on the back of the sub and running it over to one of the screws on the metal backplate. Seemed to work! Thanks!
Man let me paypal you 10 euro this is fixes my problem i had for years
How would this translate to home theater? The wire trick does nothing for me. I guess DC offset is another issue.
In all honesty, I don't know enough about home theatre to give you a good response, try and check continuity between a working home theatre amp RCA shield and ground, if there is ground there then try it on your home amp, however. Be careful. You're playing with much bigger voltages there so unplug and use ppe. Your home amp will also have a ground inside it somewhere. Just as a disclaimer, I have not tried this so am unsure if it works!
Why when I hook my subs into my 300 the constantly hit hard asf with no music playing. The second I hooked eveything and connected my subs to the amp they instantly started hitting hard asf with 0 audio coming from the car itself
You have a fault within your amp itself by the sounds of it. If it works in another car then itll be a ground or signal issue in your car.
Why dont companies do this their own
Dude...THANK YOU SO FUCKING MUCH!!!!!
I tried this to no avail, but i did notice that the hum is still there after disconnecting both rca cables leading to the head unit. Should i try grounding the cables that lead from the amp to the sub instead?
Absolutely not, thats a fast way to mess everything up. Sounds like your amps power or ground cable has an issue to me. Redo your main ground, or check it.
@PacmanBasshead I redid the ground and connected everything besides the rca cables. Turns out that the hum goes away when I remove the incoming single wire. Maybe the amp is fried?
@markopolo7651 thats the remote wire, if you remove that the amp turns off..
@@PacmanBasshead thx for your patience, turned out to be a bad connection on the stereo/mono switch👍
@markopolo7651 those things are a bitch! Easiest fix for that is to remove the amp from the car entirely, let it discharge overnight, get some 99% isopropyl alcohol and spray it into the switch, toggle it back and forth (literally) 100 times. After 5 mins the alcohol will have evaporated and youll be good to go
Diggity got a like from me
🤯👍
Ya but, the whine I have does it even with HU off.
so what cause this ..... because im not coming from my head unit ...
Hum!! Demonstrate it more practically. Plz
6:32😂😭
JBL's solution is to run an extension cord across the room. If that resolves it, keep the extension cord. Seriously, that's their advice.
I’m getting it from my mids amp bro please help
Have you tried this in the video?