You are absolutely right and I did try to do that but Fusion refused to add the chamfer to the full area I needed it. It cost me about 1 hour extra printing. Appreciate you noticing such details :-)
@@v4projects in the slicer itself you can use “make overhangs printable” setting which should've worked perfectly for this specific case. Also if Fusion refuses to add a chamfer, try lowering the radius a bit, e.g. if you need a 3mm chamfer try 2.8 or something. It would have no negative effect on the print.
I tried lowering the radius, but I couldn't get anything usable out of it. After some time trying different things in Fusion, I just accepted the extra printing time. (Lazy, I know). I have never tried the slicer setting you suggested. It's in Orca but I can't find it in Bambu Studio. Thanks for the tip!
Love finding new great channels!
0:50 those supports can all be completely avoided by giving the lower edge of the protrusion a 45 degree bevel
You are absolutely right and I did try to do that but Fusion refused to add the chamfer to the full area I needed it. It cost me about 1 hour extra printing. Appreciate you noticing such details :-)
@@v4projects in the slicer itself you can use “make overhangs printable” setting which should've worked perfectly for this specific case. Also if Fusion refuses to add a chamfer, try lowering the radius a bit, e.g. if you need a 3mm chamfer try 2.8 or something. It would have no negative effect on the print.
I tried lowering the radius, but I couldn't get anything usable out of it. After some time trying different things in Fusion, I just accepted the extra printing time. (Lazy, I know). I have never tried the slicer setting you suggested. It's in Orca but I can't find it in Bambu Studio. Thanks for the tip!
This is such an informational video! thank you for this! I've been meaning to 3d print a speaker system myself
Jesmonite is generically an Alpha plaster and an Acrylic polymer. Look up SP201 and Crystacal.
Is there a link to download it?
Not for the speakers, just the case for the amp. You'll find that in the previous video about this.
@@v4projects and why not the speakers?
They are no good :-)