ฝัง
- เผยแพร่เมื่อ 8 ก.ย. 2024
- All Available parts for the GR86 & 22 BRZ will be listed here
86speed.com/to...
SS-102-BK OIL FILTER ANTI-DRAIN ADAPTER - BAXTER PERFORMANCE
86speed.com/ss...
86speed Is Your Shop for Extensive Aftermarket Parts For
Toyota 86 | BRZ | FR-S | GR86
Do you have a non 86 related car check out our parent website
Speedindustry.com
Follow us on our socials:
/ 86speedlv
/ 86speed
#86speed #subarubrz #gr86 #fa24
Just yall know, the air wont blow any RTV off. Oil pump by design has zero torlerance, there isnt enough space to blow air pass the oil pump. Worse, youre going to damage your internal seals.
Oil filters have flaps to stop draining while the engine is off so this is redundant, I fail to see how this can do anything about rtv or debris in the pickup considering its the pickup screen that gets clogged. If air is getting into the filter channels inside the timing cover, wouldn't a much cheaper and more permanent fix to be to simply seal the plate with rtv?
In my oil cooler install saga I had to remove the oil filter off a few times. it takes about 10 to 15 mins for most of the oil in the filter to drain out. Not 30 seconds like mentioned here but most of it eventually drains out.
I'd like to see a follow up on this with your real-world experience using the product and some testing showing its efficacy. As it stands, I am not convinced this solved a real problem.
it's 260$ for anyone wondering
Sounds like a gimmick and a dream lol
...dude... don't shoot unfiltered compressor air into the oiling system of your engine.
Lmaooo. Yall selling scented candles and essential oils too?
This is for paper cartridge top mount type filters that have no ability to have an anti drain back. It definitely quiets up the top end on startup.
Its stuff like this that makes me not want to trust you guys at 86 speed. Oil starvation on the fa24 has nothing to do with the rtv. The oil starvation is caused by 3 major design flaws in the oil return system. The only solution so far has been a higher capacity oil pan with baffles, this would also be the most cost effective solution and most convenient solution. This solves the issues because it allows the engine to have the elevated oil pressure of a overfill without the negative of aerating the oil in the crank when the overfill results in too high a resting oil level. This has been observed with data. So stop selling snake oil this is straight misinformation, not to mention blasting air into the oil return will solve nothing aside from possibly causing issues.
Bro, don't the oem filters have anti drainback valves to do the same thing? 🤔
Yup. 😂
Please post follow up data for the oil drop GL !
These guys probably but antibotic cream on every tiny cut they get. This is just silliness.
A couple questions. Will it be too tall if there is already a Jackson Racing Oil Cooler adapter? Will it work at all? What is the minimum pressure to open the one-way valve?
Does not fit with the Oil cooler adapter.
It definitely will not work if you're running a Jackson Racing Oil cooler. This adapter adds an extra two inches of rise. I'm running a Jackson Racing Oil cooler and checked the clearance by simply placing a piece of 2X4 on top of the oil filter. Hood will not close.
0 engines have failed due to RTV
Right hand turn is what’s killing these cars
Half right. Clogging has led to oil starvation in early models. Long high G turns will drop oil pressure, which can be mitigated with an accumulator.
@@burakoshimazaki there has been testing that rtv clogging 1-2 side of the pickup doesn't actually cause issues with oil starvation. it's the design/engineering of the way it pickups/oil pan design + right turn high g's that leads to oil starvation causing engine failure. all these worry cats about rtv is getting old lol. I agree oil sump does indeed solve the problem and car will run fine regardless of rtv in pick up or not. majority of these losers don't even pull high enough g's to cause oil starvation anyways.
So you need compressed air to even change your oil? Doesn't seem very user friendly if you don't have compressed air. Also how would it work, it it can work at all, with the Jackson Racing Oil cooler? Or any oil cooler at that.
Note that you can't run this if you have an oil cooler installed; unless you want to cut a hole in your hood
Would this help improve the oil pressure lost in the right hand turns? That is the main Achilles heel for the 2nd gen cars and not the RTV issue
Unlikely. The solution to that will likely be a larger oil pan, such as the one Verus is developing.
Would love to see the follow up vid on this, very interested!
At the end did you mentioning trying it- will you demonstrate hooking up the air? I'm interested in seeing what effects it has.
I don’t quite understand what is going on here.
Not a fix keep trying
I understand what hes saying but I still dont understand how - was it me or am I still extremely unconvinced?
where does Subaru get their engineers from? They should hire Baxter Performance engineers.
This is snake oil
hm might think of getting this for my 86 by need a follow up
Lot of ignorance on this board. Do you know if the cenapoise value of oxygen is? It's like 028 meaning whoever said that the tolerances are tight on the oil pump. Check yourself before you wreck yourself. Air is a liquid and it's going to easily bypass through there and even if there's 2,000 clearance it's going to easily blow by there. So you also need to realize that a lot of these guys out there going out there buying these $3 supertech oil filters that have anti-drain back valves made of nitrile that don't stop the oil from draining out of the filter. That's why when you screw a vertical filter off of a Subaru it may be absorbed into the media but no oil comes out of the center. A proper drain back valve would not allow that to happen.
Don't care about your cam phasers go for it.... A lot of people commenting here. Got ancient Subarus before they switched over to fujibond as gasket material for almost every possible component of this engine. And it cost $1,000 to drop the oil pan if you don't have a WRX and have a boroscope put up the oil intake and guess what you're going to find up there RTV or Fuji Bond as we call it. With a WRX you can buy a new oil pan and a new oil intake that's not cheap, ass, plastic or designed so badly that your $39 oil pan can handle going around a sweeping right turn without causing oil starvation by tossing all the oil to the left side of the pan.
Nobody criticizes you for buying your big tires and putting lift kits and all this nonsense on there. But oh my God if we want to prevent all the oil draining out of the top and it's utter nonsense to those who don't know how engines operate. And I guarantee you when you have that filter hydro locked. It's not going to let air back in there. And these aren't like before you were born. You'd have to crank an automobile for 2 or 3 seconds to give the oil pump time to get some oil up into the top end of the engine. Now with these new designs they fire off and 3/4 of a second and with auto stop start you're dry starting 50 100 times a day. When I say dry start I'm talking pull up to a light for 3 minutes. The oil drains out of the the center return of your filter and you're constantly refilling your filter every time Auto starts. Stop engages that's why I've disengaged that as well
scam