Oh, I meant to offer this advice, Next time you do this to your door handles... simply add some bearing grease into your socket, that will "stick" the bolt/ nut into your socket wrench without fear of dropping it into the abyss...👍
Nice job. I used a curled up paper or part of a toilet paper roll under the two screws in the door. That way if they fell, the were still accessable. But nice job on your project. Your csr is looking great!
Wow nice work! Blue tape = less scratches on the paint when removing things ;-) really appreciate the video as there are not many good walk throughs on the forums for these!
Knife Nut I put a small scratch in it - which idgaf about (daily driver and autocross car - not a show car) - and the ONLY reason that happened is due to my doing this one handed. You’re welcome for the video.
Once again thank you for making a video for all of us, and you did a fantastic job, looks great, nice and clean. You do very good work, and like I said beforehand, it is so awesome too see you as a female doing this on your own without some idiot man with a hard-on lecturing you about how to do these things to your sexy looking 370z!! ( ...and I'm a guy...That enjoys all kinds of carcrafting, and you make this a better hobby with your videos!! ) Good job. Hope you have a enjoyable summer.
Joe Jones aww thanks Joe! That means so much to me! I’m glad you enjoy the videos. My husband does help me from time to time mostly when I need the muscle I don’t have 😂 but he doesn’t lecture me :)
Robyn C oh no! Do you have a different bolt? Did you get It fully out before it stripped? As for the clip you could try getting some pliers in there to pinch it. They’re reallllly difficult to unclip.
@@370ZVideos I really couldnt unclip it so I bought an Easy Out Set to get the screw out lol. Thanks for the video. My door handles looks so much better now that it isnt silver.
Came in clutch thank you! 🙏🏽🙏🏽🙏🏽
Oh, I meant to offer this advice, Next time you do this to your door handles... simply add some bearing grease into your socket, that will "stick" the bolt/ nut into your socket wrench without fear of dropping it into the abyss...👍
Joe Jones thanks for the tip! I have that long magnet that helped me pull out two bolts that were in the bottom of my passenger door 😂
Nice job. I used a curled up paper or part of a toilet paper roll under the two screws in the door. That way if they fell, the were still accessable. But nice job on your project. Your csr is looking great!
Old Southern Workshop Est 2015 thanks! That’s a handy tip too!
Awesome! Goin to be doing this soon. Glad to know the door panels don't need to come off.
Put a bit of sticky tack at the end of your socket. Works for me everytime like a charm. Or just get a magnetic one.
Thank you! I was able to fix mine without replacing it just needed to fix some of the mechanism
Wow nice work! Blue tape = less scratches on the paint when removing things ;-) really appreciate the video as there are not many good walk throughs on the forums for these!
Thanks for sharing this!! Job well done!
shuura you’re welcome! :)
Knife Nut I put a small scratch in it - which idgaf about (daily driver and autocross car - not a show car) - and the ONLY reason that happened is due to my doing this one handed. You’re welcome for the video.
Looks great love my z what would you suggest to use on the outside trim what the best back to black to use .
Thanks for sharing! This is exactly what I need to do. Is that a 2016 Sport, and did you also have the rims powder coated? Looks sweet!
rollercoaster55 hey! My car is a 2012 sport. Rims are plastidipped.
Good job!
Thank you very good information
Once again thank you for making a video for all of us, and you did a fantastic job, looks great, nice and clean. You do very good work, and like I said beforehand, it is so awesome too see you as a female doing this on your own without some idiot man with a hard-on lecturing you about how to do these things to your sexy looking 370z!!
( ...and I'm a guy...That enjoys all kinds of carcrafting, and you make this a better hobby with your videos!! ) Good job. Hope you have a enjoyable summer.
Joe Jones aww thanks Joe! That means so much to me! I’m glad you enjoy the videos. My husband does help me from time to time mostly when I need the muscle I don’t have 😂 but he doesn’t lecture me :)
Damn stop simpin bruh u sound mad thirsty
I'm trying to figure out if the handles themselves are easy to take apart and put back together again... I wanted to wrap mine rather than paint.
I literally cannot remove the blue adapter
very nice @@
what year is your Z by the way ??
sunnyboy8644 2012
How did you recover the bolt when they drop?
Robyn C I have a long skinny magnet that I snake into the door
What color is that?
The paint? Gloss black.
My car is black cherry
@@370ZVideos Mine to girl!!! The best colour 🖤🍒
So my freaking bolt got rounded. How do I unclip the blue thing. I cant do it to save my life it is so hard even whrn thr window is up
Robyn C oh no! Do you have a different bolt? Did you get It fully out before it stripped? As for the clip you could try getting some pliers in there to pinch it. They’re reallllly difficult to unclip.
@@370ZVideos I really couldnt unclip it so I bought an Easy Out Set to get the screw out lol. Thanks for the video. My door handles looks so much better now that it isnt silver.
Robyn C that’s awesome :) glad to hear you got it figured out!
Got my 370z painted and now my driver door handle won’t open. It locks and unlocks just fine but when I pull the handle it won’t open 🤔
Watch your language😡