GOOD LORD! This is mind-blowing! I'm serious, this is just boggling and absolutely beautiful! I swear to you, you'd better sign and label this because it's going to show up in a museum 1000 years from now and people will be blown away by it.
As a harpist who (without any woodworking experience) built a small kit harp some years ago, this is absolutely stunning and impressive!👏 So much thought and skill put into the building, and you're playing it too!
I'm much better at the woodwork than the playing! LOL! But I wanted to learn so I could understand and appreciate why the harp is built the way it is. Thanks for visiting! 😜
Exceptional! Nice work. I particularly like the carvings, and how dimensional the knots are! Those three-dee animations helping to explain how the harp is put together are very nice too. Multi-talented, for sure! 🙂
Hi Angie B. Thanks for that feed back. I have wondered if my animations are worthwhile or not. Or if they just get in the way. I think they're one of the things that sets me apart. I haven't seen other woodworkers etc. doing that kind of explaining. 😊 The knot work was fun to do, and I'm glad I designed my own. I love Celtic knotwork, but haven't done a lot of it myself. Thank you for visiting! 💪
As a guitar builder, we never put any finish inside the box. As the bare wood ages, it develops very complicated overtones, that improve the sound quality 10 fold. As a wood worker, I can guarantee the epoxy used to glue the staves together, would never have failed, especially since you have those bulkheads.
May I ask how did you overcome the issue when you had to attach the pillar joint to the soundboard? Is there's something I missed in the video? Love the harps design btw great job!
For me, I wasn't certain what to do at that point you mention. So for my sound board, it does not touch the pillar and is only connected at the bottom, sides & top of the sound box. The spine the strings attach to, forks at the bottom and goes around the pillar. I do not know if that's a great idea or not, but it worked for me. I'll post a photo of this to my community tab so you can see.
You did such an amazing job! I’m looking into building my own lever harp and I’m wondering how much it would cost for all the materials? And how long it took you to create this? Thank you so much! I’m so inspired.
Well, it has been a few years now. I think I spent close to a $1000+ on the materials, and it took me about 2 years from start to finish. The harp is based on plans from Robinson Harp Shop. Of course I was only working on it in my spare time. :) Best of luck with your project.
Took about two years. That's the one thing TH-cam doesn't really convey - just how long a project like this really takes. I know my woodworking TH-cam friends all understand that. :) Anyway, I'm excited to finish the table I'm working on so I can build another harp. Smaller this time.
At the moment I'm stuck living in an apartment and I do not have a wood shop. That makes it hard for me to build anything large. I did just start building a Lyre Harp and I'm borrowing some help from Dad to use his workshop. Realistically, I think it is going to be late next year before I get a new home purchased and can set up a new workshop. I DO HOWEVER, want to build a 22 string Lap harp for myself, so I know once I get settled again, I'm going to be working on such a project. Anyway, stay tuned, or check the community tab for updates. I'll get there one of these days. Thanks for commenting! I'm glad people are interested in a 22 string harp.
Ideally it shouldn't be. If I had it to do over again I would build it lighter with a frame and thinner skin. But as I had never built a harp before, I over designed it for strength. Thanks for watching!
Love your design... especially since I love horses...and playing my harp
Me too! Thanks for watching!
GOOD LORD! This is mind-blowing! I'm serious, this is just boggling and absolutely beautiful! I swear to you, you'd better sign and label this because it's going to show up in a museum 1000 years from now and people will be blown away by it.
Golly, thanks. Technically it is signed, just in elvish script. LOL 😇
🌹 Great upload.~
🌷 Beautiful harp.~ So fabulous and wonderful.~ May you always be happy and healthy.~
Nice video.~ 👍👍👍🙂🐹
As a harpist who (without any woodworking experience) built a small kit harp some years ago, this is absolutely stunning and impressive!👏 So much thought and skill put into the building, and you're playing it too!
I'm much better at the woodwork than the playing! LOL! But I wanted to learn so I could understand and appreciate why the harp is built the way it is. Thanks for visiting! 😜
Beautiful harp and a wonderful piece of art. You should be very happy with your harp. I hope you enjoy many years of beautiful music.
Thanks, Laure! I'm pretty happy with it. One of these days I'll build another. :)
Wow nice sharing stay connected
Really lovely sound!
Thank you! I wish I had more time to play it, but it's been a busy summer. :)
Absolutely beautiful!
Thank You! I'm very proud of that project. :)
Awesome. Good Job.👍👍👍. Nice sharing 😊😊😊 stay connected 🙏🤝 🔔
Gorgeous
Thank you! One of my treasured harps, for sure.
Exceptional! Nice work. I particularly like the carvings, and how dimensional the knots are! Those three-dee animations helping to explain how the harp is put together are very nice too. Multi-talented, for sure! 🙂
Hi Angie B. Thanks for that feed back. I have wondered if my animations are worthwhile or not. Or if they just get in the way. I think they're one of the things that sets me apart. I haven't seen other woodworkers etc. doing that kind of explaining. 😊 The knot work was fun to do, and I'm glad I designed my own. I love Celtic knotwork, but haven't done a lot of it myself. Thank you for visiting! 💪
As a guitar builder, we never put any finish inside the box. As the bare wood ages, it develops very complicated overtones, that improve the sound quality 10 fold. As a wood worker, I can guarantee the epoxy used to glue the staves together, would never have failed, especially since you have those bulkheads.
Interesting. I'm working on a Lyre harp now, and am debating whether to seal the inside or not. Good to know. Thanks for the feedback.
BEAUTIFUL HARP!
Thank You. Love my harp... one of these days I'll build another - smaller - one, I think. :)
@@rosascreativeworks5403 I have a harp built from the Robinson plans for the Tara. I did it in Ebony high gloss.
@@ChucklesKeys Sweet! Ebony would be beautiful!
creative hands, amazing skill too
Very nice, thank you for sharing.💕
My favorite video by far. I'll have to build another harp soon. :)
Wow! Beautiful!
Thank you! I'm very proud of it. :)
absolutely beautiful!!
May I ask how did you overcome the issue when you had to attach the pillar joint to the soundboard? Is there's something I missed in the video? Love the harps design btw great job!
For me, I wasn't certain what to do at that point you mention. So for my sound board, it does not touch the pillar and is only connected at the bottom, sides & top of the sound box. The spine the strings attach to, forks at the bottom and goes around the pillar. I do not know if that's a great idea or not, but it worked for me. I'll post a photo of this to my community tab so you can see.
Absolutely beautiful! You do such nice work. I love the sound of a Celtic harp. 🙌🙋♀️
Inspiring! What a unique harp
Thank you! Currently my favorite harp! 😎
Thank you for sharing VDO.
Stunning job, beautiful harp!
Thanks! I cannot wait to build another (smaller) one. Gotta finish the table project first. Sigh. 🤓
Super good
You did such an amazing job! I’m looking into building my own lever harp and I’m wondering how much it would cost for all the materials? And how long it took you to create this? Thank you so much! I’m so inspired.
Well, it has been a few years now. I think I spent close to a $1000+ on the materials, and it took me about 2 years from start to finish. The harp is based on plans from Robinson Harp Shop. Of course I was only working on it in my spare time. :) Best of luck with your project.
Very nice build.
Thank You! Hoping to build another some day. :)
Amazing build 🛠👍😊
Took about two years. That's the one thing TH-cam doesn't really convey - just how long a project like this really takes. I know my woodworking TH-cam friends all understand that. :) Anyway, I'm excited to finish the table I'm working on so I can build another harp. Smaller this time.
Is there a eay you can build a harp sample for 22 harp so i can build it?
At the moment I'm stuck living in an apartment and I do not have a wood shop. That makes it hard for me to build anything large. I did just start building a Lyre Harp and I'm borrowing some help from Dad to use his workshop. Realistically, I think it is going to be late next year before I get a new home purchased and can set up a new workshop. I DO HOWEVER, want to build a 22 string Lap harp for myself, so I know once I get settled again, I'm going to be working on such a project. Anyway, stay tuned, or check the community tab for updates. I'll get there one of these days. Thanks for commenting! I'm glad people are interested in a 22 string harp.
Are your Epona harps available upon request? If so, what is the price point? 🍃
Alas, no. I don't make them for sale. Thank you for asking. :)
why the soundbox so thick?
Ideally it shouldn't be. If I had it to do over again I would build it lighter with a frame and thinner skin. But as I had never built a harp before, I over designed it for strength. Thanks for watching!
How much is this item when ordered from you?
Not for sale. I am just a hobby builder. Thanks for watching.
Semangat bosku semoga sukses selalu buat chenelya salam kenal
You're better than you know
Awww, shucks, thanks! :)
Astoanshing!
Thank You! :)
B...r....a...v....o..........
THANK YOU! :)