Unlike C clamps that use rotational force (direct twisting of the screw), these are parallel closing jaws that "Can't Twist" off center as you apply tightening force.
Just a tip if you would like to have the clearance and use the Kant twist clamps while epoxying... cut the fingers / thumbs off of some rubber gloves and slip them over the pads and arms of the clamps. You will get the clamp force that could be handy and you will keep the epoxy out of the moving parts..... Just thought it might help. Cheers.
my favorite thing about this channel is how inspiring it is. Your knives make me want to start my own projects, but when you also show viewers knifes, it gets my juices flowing. I have zero tools and I'm on a budget but these videos always keep me thirsty to want to make my own knives.
Way to give your viewers some air time. All three show some real promise. Their just going to get better and better. I really enjoy those Japanese inspired kitchen knives
I have a box of these from my father in law. Thanks for letting me know what they're for. I was going to get rid of them. Oops. Now I'll use them for making knives. Thanks again!!
Use them to clamp your glue ups. Especially when you are gluing handle and bolsters to spacer material. you'll find you get next to no sliping and sliding of the materials like you do when you use a c clamp. Primarily because you're not twisting the foot to clamp down. I started using them a while back and now only use them. Princess auto carries them.
Okay I enjoy your channel. Tool time Tuesday! I've seen Alec Steele using these, look extremely useful. Speaking of Alec Steele Where is the damascus!!!!!!! I know you have it. Quit holding out on me, us, YOURSELF Love the channel😄
I always thought they were called kant twist because they Don't twist. C clamps can twist and slide around when in use and you apply side forces to the work. Never thought about the cantilever idea - who knows
I think you’re right. I’d never heard of them named that because they don’t twist before I made this video but that makes sense. ...they both make sense....😆👍
I know I am behind schedule, but these clamps are way too expensive here in Australia. Just buying on ebay (no mainstream hardware seems to have them) is anywhere between $50 and $160 each.
Unlike C clamps that use rotational force (direct twisting of the screw), these are parallel closing jaws that "Can't Twist" off center as you apply tightening force.
Now that totally makes sense. I knew someone would know! Thanks👍
Chris Lewis yep exactly! I'm a welder and use these guys all the time. They are lifesavers.
I have just purchased two 1 1/2 " clamps from princess auto for 12.99 each you have to watch for the sales though
Just a tip if you would like to have the clearance and use the Kant twist clamps while epoxying... cut the fingers / thumbs off of some rubber gloves and slip them over the pads and arms of the clamps. You will get the clamp force that could be handy and you will keep the epoxy out of the moving parts..... Just thought it might help. Cheers.
I laughed when you said they are good for holding joints, i had to reorder my 3/4" clamps as my my kids took them for roach clips!! Lol
my favorite thing about this channel is how inspiring it is. Your knives make me want to start my own projects, but when you also show viewers knifes, it gets my juices flowing. I have zero tools and I'm on a budget but these videos always keep me thirsty to want to make my own knives.
Way to give your viewers some air time. All three show some real promise. Their just going to get better and better. I really enjoy those Japanese inspired kitchen knives
Excellent for all of my tig welding projects also. Absolutely love kant twist clamps
I have a box of these from my father in law. Thanks for letting me know what they're for. I was going to get rid of them. Oops. Now I'll use them for making knives. Thanks again!!
Great demonstration on these clamps. Thanks for sharing.
I was you 700th thumbs up…you’re welcome😁😁👍🏼.
Looking to buy some with Christmas money.
Right on buddy!! Thank you. All the best to you gents and your families in 2023👍
I legit screamed when you popped up. Tell me the wife loved the shaved face!
Hahahaha! That’s funny😆 She doesn’t care either way. I just get bored with facial hair after a while.
When I saw the face I assumed you had run out of arm hair for edge testing.
Cool looking clamps
"I've been wrong once before" at 2:53 LoL!
I love my Kant Clamps. I have about 10 of them.Great vid.
Use them to clamp your glue ups. Especially when you are gluing handle and bolsters to spacer material. you'll find you get next to no sliping and sliding of the materials like you do when you use a c clamp. Primarily because you're not twisting the foot to clamp down. I started using them a while back and now only use them. Princess auto carries them.
Okay I enjoy your channel. Tool time Tuesday! I've seen Alec Steele using these, look extremely useful. Speaking of Alec Steele
Where is the damascus!!!!!!! I know you have it. Quit holding out on me, us, YOURSELF
Love the channel😄
Princess auto actually carries these! They are in the welding section
Oh sweet! I didn’t know that. Thank you!
Good looking clamps.. i may have to try them
I need a set of these clamps in the arsenal seem like they. Are designed for the knife maker and set up for drilling holes on the drill press. Martin
I need to get these! Drilling scales, for some reason is the hardest part for me. 😩 👍
Nice one Jeremy I've recently been looking at these although postage to the uk is double the cost but hopefully some will come up on eBay 👍🏼👍🏼👍🏼
I've seen these clamps 2 times today. Must be a sign from above. I will get them added to the cart. ;-)
Probably a sign the Mic is turned on, on your cell phone. They're listening, trust me. Google it!
What is that sacrificial orange material used at 3:31 while drilling?
I have some from holex, both Pads are the same size, everything is made from Steel and they only cost about 15€
No more Tool Time Tuesday. You're starting to cost me real money. PS. Love the new guy doing vids for you.
Hahaha! Blame it on the new guy! 👍
Glad your channel is active again, but the new guy? Hmmm. Love your work man.
Wait were is the dollar shave club sponsorship!?
Good tool time Tuesday!
Very Nice.😎💪🖒
Added to the Christmas List. :)
They’re pretty slick little units 👍
I was going to buy 4 of the 2" clamps until I saw what they wanted for them. No thanks, I'll keep using the traditional C clamps.
You can get those clamps at princess auto
All cleaned up and reppin’ a VG shirt. TIm Horton’s cup is missing from the frame. ;)
Alec Steele had them in his video too today! Deja vu?
I'll have to go back and watch his again... I didn't notice them.
They are called cantilevered twist clamps (all over the web).
I always thought they were called kant twist because they Don't twist. C clamps can twist and slide around when in use and you apply side forces to the work. Never thought about the cantilever idea - who knows
I think you’re right. I’d never heard of them named that because they don’t twist before I made this video but that makes sense. ...they both make sense....😆👍
What about making a kukri one day??? It will be great...
They sell them at Princess Auto.
THE BEARD NNNNNNNNNNNNNNOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO!
Hahahaha! It’ll be back eventually👍
Great as always.
Where's the framelock knife?
It’s in the future👍
That's what he is making with Alec Steele's Damascus...also in the future...lol JK Jeremy...balls busted baby face ! XD
Who's this kid???? 🤣🍁🍻
Hahaha! 👍
Надо сделать в торце ручки (крутить) PZ2 крест для шуруповерта. Чтобы можно было шуруповертом быстро зажимать и разжимать.
Did you get Jury Duty or something? So clean shaven, almost didn’t recognize you.
Hahaha😆
I know I am behind schedule, but these clamps are way too expensive here in Australia. Just buying on ebay (no mainstream hardware seems to have them) is anywhere between $50 and $160 each.
Great channel though.
20 bucks on Zoro... Not sure if shipping cost more to Canada
Wow no beard!!! Whose this guy
Some weirdo hanging out in my garage 😆👍
Simple Little Life well cheers on the fresh cold face lol.I know the feeling
Mr.Clean lol....
Wrong ONCE before...Cool
4
Who’s dat guy Hahahaha
I legit got confused when I saw the thumbnail for this video. "who the heck is that in that thumbnail...., OH he shaved his beard"
First
HELL JEAH
Dude...why the beard!?!?
Sometimes a change is as good as a rest 👍 (I always just grow one and shave it. I seem to get bored of facial hair easily😆)
What happened to your beard? :( Just kidding. Hope you're having a nice holiday!
Ты зачем усы сбрил? )
Bring back the beard