I've been using INAV for quite a while now and I try to convince myself that I am not a 'beginner'. However, every time I watch one of your excellent 'INAV for Beginners' series I learn something I probably should have already known. Brilliant stuff Lee and thanks for all you do for our hobby.
Just in time I’m actually installing my speedybee in to my ranger as I type , think I blew the tx800 up though 😢 didn’t unsolder the jumper on the Bec was working but no lights now 😢 , Apart from that all going well thanks to Lee appreciate what you contribute to the hobby 👍🙏🙏
Well you finally got me into Inav and following into the field with a wing. Thank you for your series and all your videos I don't think I could have got this far in the hobby without your help. Hope I have the patience for your next video....😂
You have been a godsend for my journey into the FPV world. I cannot thank you enough for the time you commit to making incredible content. I'm a huge fan, thank you for your expertise! I have now flown over a dozen successful fixed wing iNAV flights with my Opterra 2m!
Thanks again for a great little series. I have often wondered if INAV would manage in a small EDF jet. These are particularly tricky to hand launch on your own and also being small you can easily lose orientation and sometimes direction, mine also dips the nose a lot in a turn. I've never seen a series going through installing INAV in an EDF, covering auto launch, RTH and stabilising etc. If you ever need a topic for a new series please consider this.
Hello again sir....very informative video... managed my maiden today with dolphin .... quite daunting....quick question if you don't mind giving some input 1. I set my level pitch trim 3 degrees and my autolaunch climb angle 18 deg... does the climb rate add another 3 deg or minus 3 deg or no effect at all on climb angle? Tq sir
Brilliant set of videos, thanks Lee. Quick question about the compass. You made reference in both the 1st and 3rd video about not using the compass. Why? Is there a reason not to use it with the GPS and inav? Many thanks
Noobie here, im curretly reading more into the INAV and watching videos of the AtomrcDolphin. So the set up video you did pertains to this little wing you set up here or this video can be applied to the AtomRc Dolphin as well? Thank you in advance.
Hi, great videos, I’ve watched the series about 4 times. I’m already for madian flight, but one thing, In the receiver tab all sticks on the computer are good but when you look at the plane the pitch is backwards,so for me to get the flaps to raise when pulling down I had to go in the radio and reverse that channel. Now looking at the plane it moves correctly but the computers roll now on the graph is the other way is this ok since the plane is actually moving the right way? And I did try all the reverse servo steps too this was the closest i could get it
hey, u checked the amount of travel of the servos only with raising pitch - shouldnt be the 9mm for pitch+roll? i have the ar wing pro (1m modell) and it says 12mm of travel - so im courios if i have to go for 12mm travel for one side for roll and pitch combined or 12mm for pitch only (so the total travel for one way would be 24mm) thank you alot for this beginner guides :)
So, this is not necessary to configurate the radio with a preset failsafe, the FC detects? when I switch off my TX16s with Crossfire, I haven't the red parachute, and I didn't find a "no pulse" option in the Crossfire nano menu? When I connect the FC with INAV configurator, then the parachute is red, becomes grey when Tx "on", but it stays grey when the Tx is switched off!
Lee at about 22:04 the transmitter sounds "ready to fly " I get this every time I move a control , along with a harpic buzz. I haven't set this up ! any thoughts?
Hi, this is my first inav build and am using the atomrc dolphin pnp version with matek f411 WTE and inav6.1. My esc (atomrc 30A, dont know if it is DShot or not) moves the motor either in Standard or DShot150. But the motor movement is stuttery and there is a smell coming out of it. I am using the S1 G1 pads for esc signal wire. Can you please suggest what else I could check?
Hi Lee, Whenever i arm the FC the buzzer starts beeping. Motor is arming and rotation. I am using Dshot 150. I already had several flights with this set up without the beeping. This beeping started just after a successful flight. I played with disabling buzzer but then in case of lost model it wouldn't be nice. Can you please suggest where can i start looking?
@@Painless360 Disabling the LAUNCH_MODE_LOW_THROTTLE in Beeper setting got rid of this beeping while armed. There are several Beeper setting which might not be needed all the time but could not find any updated documentation. Actually one of your three year old video helped me troubleshoot this. Thank you
I'm tempted to make a video on this as the autolaunch warning beep (and unresponsive throttle) is commonly seen as an issue... stay tuned! - th-cam.com/video/hEEdlsOV-fo/w-d-xo.html
Hi! I’ve been following this series for my first Nano Goblin wing build, really helpfully thank you! The servos and motor are installed, but my motor only works when using the sliders in the ‘motor test mode’, but not with my receiver.. any thoughts what this could be? (the servos are working fine. The modes are setup correctly with arm, etc. The ecs is dshot compatible, and selected in the config tab)
@@Painless360 Hi Lee, such a good work for a beginner like me with INAV, thanks to your videos... what are the conditions to be able to arm? my GPS is flickering so it's ok, my position is on the map on INAV GPS page, but not able to have the motor run with the Tx stick? (but ok with the blue slider on INAV)?
I've been using INAV for quite a while now and I try to convince myself that I am not a 'beginner'. However, every time I watch one of your excellent 'INAV for Beginners' series I learn something I probably should have already known. Brilliant stuff Lee and thanks for all you do for our hobby.
Just about to go to bed and you drop this! Cheers again!
I got my first matek f411wte. I dont even know where to start lol. Im watching your videos. 🤞🤞
Best of luck!
Just in time I’m actually installing my speedybee in to my ranger as I type , think I blew the tx800 up though 😢 didn’t unsolder the jumper on the Bec was working but no lights now 😢 ,
Apart from that all going well thanks to Lee appreciate what you contribute to the hobby 👍🙏🙏
Well you finally got me into Inav and following into the field with a wing. Thank you for your series and all your videos I don't think I could have got this far in the hobby without your help.
Hope I have the patience for your next video....😂
You have been a godsend for my journey into the FPV world. I cannot thank you enough for the time you commit to making incredible content. I'm a huge fan, thank you for your expertise! I have now flown over a dozen successful fixed wing iNAV flights with my Opterra 2m!
Looking forward to seeing how this one flies.
See my video on it where I fkrw it for review. Flies great... Happy flying
Really fantastic tutorial, Lee! Thanks a LOT! 😃
Stay safe there with your family! 🖖😊
Hi Lee, Thanks for a great update on INAV. I can't wait to update my AR Wing pro.
Thanks again for a great little series. I have often wondered if INAV would manage in a small EDF jet. These are particularly tricky to hand launch on your own and also being small you can easily lose orientation and sometimes direction, mine also dips the nose a lot in a turn. I've never seen a series going through installing INAV in an EDF, covering auto launch, RTH and stabilising etc. If you ever need a topic for a new series please consider this.
Exactly the same process but you'd need a high idle throttle setting for auto launch to get the thrust high enough to throw.... Happy flying
@@Painless360 thank you
Thanks!
No, thank you! :D
Great video per usual 🙏
What about Failsafe setup? Did I miss it?
Set for RTH... Happy flying
Thanks, I see it is in the beginning of part 4... I thought it was flying only, but it was setup and flying - perfect, many thanks!
you can configure a bicopter with INAV
Hello again sir....very informative video... managed my maiden today with dolphin .... quite daunting....quick question if you don't mind giving some input
1. I set my level pitch trim 3 degrees and my autolaunch climb angle 18 deg... does the climb rate add another 3 deg or minus 3 deg or no effect at all on climb angle?
Tq sir
It'll be 18 degrees up from the level position you set. I.e. 21 degrees from how if sits flat on the bench.. best of luck
Brilliant set of videos, thanks Lee. Quick question about the compass. You made reference in both the 1st and 3rd video about not using the compass. Why? Is there a reason not to use it with the GPS and inav? Many thanks
th-cam.com/video/pfrNsW5s-cs/w-d-xo.htmlfeature=shared
Is there a mean to record the INAV parameters for use on an other similar aircraft? Especially the OSD screen once the one I please is done?
Yes, using the Diff all command. I have a video on how to read and use the Diff all file to copy settings... Happy flying
Noobie here, im curretly reading more into the INAV and watching videos of the AtomrcDolphin. So the set up video you did pertains to this little wing you set up here or this video can be applied to the AtomRc Dolphin as well? Thank you in advance.
Yes, all steps are the same.. Best of luck
Hi, great videos, I’ve watched the series about 4 times. I’m already for madian flight, but one thing, In the receiver tab all sticks on the computer are good but when you look at the plane the pitch is backwards,so for me to get the flaps to raise when pulling down I had to go in the radio and reverse that channel. Now looking at the plane it moves correctly but the computers roll now on the graph is the other way is this ok since the plane is actually moving the right way? And I did try all the reverse servo steps too this was the closest i could get it
Never reverse the channels on the radio. Always reverse in INAV as shown. See th-cam.com/video/reRLiEG7jq0/w-d-xo.htmlsi=GuhonPmxwGaBXkj0 Best of luck
si puo configurare un bicottero con INAV
hey, u checked the amount of travel of the servos only with raising pitch - shouldnt be the 9mm for pitch+roll?
i have the ar wing pro (1m modell) and it says 12mm of travel - so im courios if i have to go for 12mm travel for one side for roll and pitch combined or 12mm for pitch only (so the total travel for one way would be 24mm)
thank you alot for this beginner guides :)
Movement is normally stated for a single control. When controls are combined, the travel can become more than you might expect. Best of luck
Am I correct believing I can use my Mac with iNav to flash the F405-WMN and various other things?
Yep
So, this is not necessary to configurate the radio with a preset failsafe, the FC detects? when I switch off my TX16s with Crossfire, I haven't the red parachute, and I didn't find a "no pulse" option in the Crossfire nano menu?
When I connect the FC with INAV configurator, then the parachute is red, becomes grey when Tx "on", but it stays grey when the Tx is switched off!
Sorry Lee, disregard, found nano Rx failsafe menu must be selected "cut" , not f/s!!! 😇
Lee at about 22:04 the transmitter sounds "ready to fly " I get this every time I move a control , along with a harpic buzz.
I haven't set this up ! any thoughts?
That is the LUA script telling me that the GPS is locked and INAV is ready to go... Happy flying
Coming from fpv quads what’s your recommendation for a starter fpv wing?
Dolphin probably... see my videos aimed at quad pilots coming to fixed wing...
@@Painless360 yep will do thanks much
Thank you for your videos man! How much flap trabel do you suggest for a zohd dart xl?
Throws in the manual www.zohd.net/_files/ugd/9960f7_2ef8f8146232411e818b7acb713d739a.pdf
See my flight review of it... Happy flying
Hi, this is my first inav build and am using the atomrc dolphin pnp version with matek f411 WTE and inav6.1. My esc (atomrc 30A, dont know if it is DShot or not) moves the motor either in Standard or DShot150. But the motor movement is stuttery and there is a smell coming out of it. I am using the S1 G1 pads for esc signal wire. Can you please suggest what else I could check?
Id check that all three of the wires from the ESC to the motor are solid... best of luck
@@Painless360Thanks Lee. I replaced the motor and it now works with DShot 150. Tomorrow is the maiden🎉
Best of luck!
Hi Lee, Whenever i arm the FC the buzzer starts beeping. Motor is arming and rotation. I am using Dshot 150. I already had several flights with this set up without the beeping. This beeping started just after a successful flight. I played with disabling buzzer but then in case of lost model it wouldn't be nice. Can you please suggest where can i start looking?
Autolaunch enabled?
Thanks for getting back. Yes auto Lauch is permanently enabled under configuration
@@Painless360 Disabling the LAUNCH_MODE_LOW_THROTTLE in Beeper setting got rid of this beeping while armed. There are several Beeper setting which might not be needed all the time but could not find any updated documentation. Actually one of your three year old video helped me troubleshoot this. Thank you
I'm tempted to make a video on this as the autolaunch warning beep (and unresponsive throttle) is commonly seen as an issue... stay tuned! - th-cam.com/video/hEEdlsOV-fo/w-d-xo.html
Hi! I’ve been following this series for my first Nano Goblin wing build, really helpfully thank you! The servos and motor are installed, but my motor only works when using the sliders in the ‘motor test mode’, but not with my receiver.. any thoughts what this could be?
(the servos are working fine. The modes are setup correctly with arm, etc. The ecs is dshot compatible, and selected in the config tab)
Motor only works if the model is armed... See my INAV for beginners series... Best of luck
@@Painless360 the motor started spinning! It was armed, I wonder if I was due to GPS Sat count.. anyway thanks again
Very possibly. Arming will only happen when the model is ready to fly... Happy flying
@@Painless360 Hi Lee, such a good work for a beginner like me with INAV, thanks to your videos... what are the conditions to be able to arm? my GPS is flickering so it's ok, my position is on the map on INAV GPS page, but not able to have the motor run with the Tx stick? (but ok with the blue slider on INAV)?