Afternoon(or morning) Andrew. I recently got the f405 Wing MINI. Off amazon. I am curious, Does the Walksnail Avatar HD GM3 Gimbal kit work with the SpeedyBee f405 mini? I can see it has a HD VTX cable area, but II could not find anything regarding an Avatar HD pro with gimbal kit + speedybee wing mini INAV setup.
Hi Andrew, have you used the Speedy Bee App to upgrade firmware on ELRS receivers.? I believe it is the fastest and easiest way. It might be worth a quick tip video if you are so inclined, Cheers from across the ditch.
Select Serial Rx for UART1 in the Ports page then choose CRSF as the Serial Receiver Provider in the receiver page. They ou just have to make sure your receiver is bound to the radio. More INAV tips here - newtonairlines.blogspot.com/2023/06/inav-trouble-shooting-checklist.html
@@AndrewNewton 😂 Ah well, you're 1 up on me mate. Despite living and working around the local Sons Of Italia up here for a lifetime, the only language that I picked up was the words flying out of a gent laying in the mud, burnt trash and leaking hydraulic oil under a cane harvester. Not really helpful in dealings with the Carabinieri! 😱🙄😈
Brilliant Andrew, just what I have been looking for.
Great video
Worth making the video then, thanks
Thanks Andrew 👍💪✌
Thanks mate. I really appreciate your constant support.
again..top Video ! Andrew ❤
Thanks again!
Thank you this is the exact set up I want on my jets!
No problem 👍
I am just about to do this very thing! Thank you !!
Good luck
Can you use the f405 wing with a normal reciever like one with 6 channels?
And great Videos🎉
Thanks. No, most FCs need a serial receiver these days with all channels on one wire.
@AndrewNewton I mean a Graupner gr 16 because I bought a o3 Air Unit and I read that you can't use it without a FC
@roland7751 Yes that is a serial and PWM receiver so you can use SBUS to connect to the Speedybee
@@AndrewNewton OK thank you very much.
Keep it up with your videos
Afternoon(or morning) Andrew. I recently got the f405 Wing MINI. Off amazon. I am curious, Does the Walksnail Avatar HD GM3 Gimbal kit work with the SpeedyBee f405 mini? I can see it has a HD VTX cable area, but II could not find anything regarding an Avatar HD pro with gimbal kit + speedybee wing mini INAV setup.
Morning. Yes all you need is power (Vv) for gimbal and HD VTx, and UART R and T, and maybe PWM outputs if you also want PWM control
Can i also do this with the MINI version?
Yes, all the same apart from the MINI having VBat for VTX rather than a dedicated BEC
Hi Andrew, have you used the Speedy Bee App to upgrade firmware on ELRS receivers.? I believe it is the fastest and easiest way. It might be worth a quick tip video if you are so inclined, Cheers from across the ditch.
Not yet Paul. I should look at it thanks
Thank you, Mr., but could you please tell me how to configure Bing Map in INAV Configurator?
Have to ask on the INAV FB group. Bing Maps are discontinued.
As far as i knoe it's not possible anymore :( I tried to set it up
Hi sir m using speedybee f405 wing with elrs receiver m not avail to find in ports in iNAV plz help me
Select Serial Rx for UART1 in the Ports page then choose CRSF as the Serial Receiver Provider in the receiver page. They ou just have to make sure your receiver is bound to the radio. More INAV tips here - newtonairlines.blogspot.com/2023/06/inav-trouble-shooting-checklist.html
You been hitting the Spaghetti Bog a bit lately Old Fellah? It seems to be affecting your hands there! 😜🙄🤣🤣
Haha, my hands do speak a little Italian
@@AndrewNewton 😂 Ah well, you're 1 up on me mate. Despite living and working around the local Sons Of Italia up here for a lifetime, the only language that I picked up was the words flying out of a gent laying in the mud, burnt trash and leaking hydraulic oil under a cane harvester. Not really helpful in dealings with the Carabinieri! 😱🙄😈