Unfortunately, yes, but I have severely damaged some parts doing it. A lot of them were pressed on our have Ruston onto the point to where removing it will cause catastrophic damage. I have not yet found a way to easily fix that problem.
one of your other followers in the comments asked about finding parts for these...other than ebay...or finding another parts machine doner. Son you happen to know the name of these places?
@@jeffdagendesh2482 I know here in Missouri there are a lot of antique farm equipment stores. If you search up your states name and type in antique farm implement stores, you should find some usually in bigger country towns.
Unfortunately it’s all oiled. However that’s how most of them are in the early days I may or may not try threading some grease nipples on there to try waterproofing it more and having Grease where are the oil normally would go
Yes it’s very difficult to get that axel out need a lot of patience and heat. And you need to make sure it’s the right correct fit for the bearing you are replacing.
@@coyotecolors i enjoyed you video on this. I have 2 McCromick Deering, #6 in the process of redoing. everything seems to be loose. But i wanted to flush out those axle bearings some how
@@jeffdagendesh9011 you can definitely use Molly grease or a high-pressured grease gun. You may have to drill out a part of the frame to install a grease nipple on it. I have done that in the past.
I know they are a few places around the country that actually have a large surplus of these types of pieces of equipment. I believe one is in Florida and another is in California
I have a ideal Deering I took the drive wheel off and the 2 springs fell out and the 2 other metal pieces and I do not know how to put them back on could you help me out on this
You more than likely will have to replace the spring if I’m not mistaken, it should have a washer against the spring to ride on. Let me look up a schematic and I’ll try finding.
Who’s here after seeing the “told you I’d find you” tik tok?🙋🏼♂️🙋🏼♂️
I love buying that old horse equipment
It’s amazing to see this side of your personality.
Yo we need a story about the stuff u post on TikTok
I hope you continue to make videos!! I love the style and how you get straight to the point. It makes it super clear and interesting 🧐
why did they ban you your content was so good 😪
Loved this video! Happy to support ❤️
If you allow me some advice, before starting with the hammer on blocked parts it is advisable to spray a WD-40 unlocking product.
This was suprisingly fun and satisfying to watch. Keep up the great work
Nice I just found a similar Deering. Stood in the forest for many ears, just a little oil mixed with diesel and I could back it out by hand!
Thank you for this, it really helps me sleep :-)
Love your vids so much man!
Super interesting. Nice Video! I‘ll leave a follow there, so I don’t miss part 2!
Comming here from TikTok btw
Here from tiktok, love the content man
Me: No way he can restore this
Coyote Colors: Hold my tools
Bro I just wanted to say that was a beautiful video and it's disgusting that tiktok banned your account
This is cool man keep it up pal
I don’t know why but your videos are very entertaining to watch keep at it 👍🏻
Account got banned😭haven’t even looked through it yet
I liked you restoration video. I was wondering if you did more then just tap and wire brush the mower before you painted the mower?
I have one like it too but it is lock up bad
man just got banned
How I just saw that do you know how
@@frankrios3408 he posted a tiktok that was about murdering someone and the comments disappeared then did his account
I love to see you work on the germs what’s I’m having to do with my horse sickle lock up bad
tiktok account got banned, thankfully this was still on it
is that a number 9 ?
Will part two be coming soon
Have you ever taken off any of the drivetrain gears..? with luck?
Unfortunately, yes, but I have severely damaged some parts doing it. A lot of them were pressed on our have Ruston onto the point to where removing it will cause catastrophic damage. I have not yet found a way to easily fix that problem.
one of your other followers in the comments asked about finding parts for these...other than ebay...or finding another parts machine doner. Son you happen to know the name of these places?
@@jeffdagendesh2482 I know here in Missouri there are a lot of antique farm equipment stores. If you search up your states name and type in antique farm implement stores, you should find some usually in bigger country towns.
Why did they delete your tiktok account?
Bro why did you get banned on tik tok?
Is there grease points on this mower r is it all oiled
Unfortunately it’s all oiled. However that’s how most of them are in the early days I may or may not try threading some grease nipples on there to try waterproofing it more and having Grease where are the oil normally would go
Jake, where does one get parts for these, I am rehabbing a Giant that has the gears and clutch facing the other way.
Unfortunately they are very had to find parts for. You may have to make a gear for it or find one at a place that sells them
At the moment all mine needs is the pitman arm that has the oil cup like yours in the video.
@@derweibhai I made my pitman arm. Use a hardwood.
Dude why was your account banned on tiktok?
Did you just get banned?
Have you ever taken an axle out and redone the bearings?
Yes it’s very difficult to get that axel out need a lot of patience and heat. And you need to make sure it’s the right correct fit for the bearing you are replacing.
@@coyotecolors i enjoyed you video on this. I have 2 McCromick Deering, #6 in the process of redoing. everything seems to be loose. But i wanted to flush out those axle bearings some how
@@jeffdagendesh9011 you can definitely use Molly grease or a high-pressured grease gun. You may have to drill out a part of the frame to install a grease nipple on it. I have done that in the past.
Hey man, tiktok took your page down
I need the blade and a couple other parts for mine if you have a idea of where I can find parts
I know they are a few places around the country that actually have a large surplus of these types of pieces of equipment. I believe one is in Florida and another is in California
@@coyotecolors mine is rough I know it was working when I was little and a tree limb fell on it
@@travishopelogan2192 And unfortunately you can’t really weld on that stuff too without arcwelding
why did they ban u on tik tok ??? did they not want us to see the discover ment u did ?!
I have a ideal Deering I took the drive wheel off and the 2 springs fell out and the 2 other metal pieces and I do not know how to put them back on could you help me out on this
You more than likely will have to replace the spring if I’m not mistaken, it should have a washer against the spring to ride on. Let me look up a schematic and I’ll try finding.
how ya doing
I'm alright bud thanks for asking.
Let’s get real. i came from your tik tok
Dude, your tiktok got banned? Wtf!
Do you have a sulky plow for sale
No sir I do not unfortunately
I found out that night what no man should ever have to, murder is a sin, murder is damnation, but also murder is work.
both your accounts got banned again but why?
You got banned...
Ripe the tik tok page
Bro you just got banned from TikTok 😢
you killed
U got banned on TikTok:(
Dude you just got banned on tiktok
Don't post about the you know what they'll ban you here too
Why is yo tiktok so unsettling and shit