How or why is doing a burnout scary ? And there is nothing better than getting your tires all nice and sticky and turning around in the dirt. Absolutely brilliant.
Damn! Looks like everyone on here owns there own 600hp vehicle. No need for a dyno. The TH-cam trolls can tell you exactly how much hp it makes just by watching this video. Nice truck by the way!!
Beautiful truck man. Reminds me of mine, except mine's a little more beat up. What kind of paint does she have on her? It looks great. Also, what material did you use on the bedliner? Definitely one of the best looking C10s I've seen here on TH-cam!
450-475+ but not feelin 600hp.. maybe @ 7000rpms !! 600hp doesn't need a break stand to spin tires, I do it all day rolling @ 30mph.. nice truck bro Engine sounds very well built.. I would need to know the cam and comp specs to know what its pushing for sure, but its very healthy none the less..
Like others have said, that's not 600 h.p., not even close. With the mild cam and aluminum heads it's closer to 425-450, max! I had the same setup in my '85 GMC, with a 2,300 lockup converter and built 700R4. With the Extreme Energy cam I was running, floor it on the interstate at 70 m.p.h. and it'd keep you pushed back in your seat until you let off the loud pedal.
what is that the shifter is mounted on ? a boat seat pedestal ?... why didn't I think of that, I had to build a custom center console to get the shifter up close to me where I wanted it..
You need to put some rubber grommets around the battery cables so they don't short on the bed. That is a nice clean straight truck. You MIGHT be pushing 400HP, but not anywhere near 600.
I have an 85 C10 I am almost finished with a full resto. 383 Stroker. I am really looking for build info regarding rear end and suspension setup. Your rear tire size is exactely what I am wanting to do to mine. I would really appreciate feedback as to tire size, and width of axle and rear tub size you used. Please let me know and we can maybe talk later
very nice truck! alot of work right there. I think me and you would be a good race! my 82 k10 vs your c10. 80s? I think alot of people would like to see that :)
Some times I think I was born in the wrong time, I like every thing old school and love old farms like loud old trucks, no no nothing is old anymore won't be long till they take away gas motors and the world turns robotic......
i know this is around 5 years old I just seen this video that is one nice truck what size and parts did you have in the motor im building a 94 short step side and looking for that power again slickest 80s model ive seen on here
Title of this video should be "how not to record a video" or "how not to be an idiot"... There is a reason racing and drinking don't mix, but some of these guys don't have the balls to sit in and drive a "scary" "600HP" truck other wise. Lmfao
daniel roddenberry you're talking about an American v8. the only tuning you need to do is at the drag strip. if he wanted to maximize it for the track..then he would dyno tune it...but at 600hp, whats the point? i can see 800hp+ or fuel options tune...one for race gas and one pump
Dyno tuning is beneficial for any hp level, i do in a few hours what may take a year at the track, you would be surprised at how far off the tune can be. And for the record a 600hp naturally aspirated sbc takes some fairly serious hardware, it's doable for sure, I've found that most people that have 450hp think it's 600!
makes me wish i woulda took like vids of mine before i totatled it out. Not sure on power, but shop est. it at about 500 at the wheels, fun to hear and drive! AAlso, i'm really questioning that hp ya'll advertising, cus mine would ball a 18" pair of drags without even touching the brakes.
That exhaust note means business! These new mustangs/camaros/chargers/etc with the new aftermarket exhausts sound like crap (to me) with all that damn rasp burble and pop. But your truck sounds "nicety" combo of nice and nasty. lol
+RizoProduction Yup, and this truck is 5x because it's in video form :) Won't you go fuck with somebody that doesn't know. Cause you're comments aren't proving that this truck has anything more than 400 hp at the flywheel.
timmy tyler Atleast he poster a video of his vehicle, you're all blow and no go. You know what, You remind me of this kid from my town, he drives around a straight manifold 4 banger ford ranger, and tells everyone he has a "v8 with a stage 8 turbo making 800hp" You're just like him, full of shit.. Post a video of your little "600 horses", and then we can talk, till then, sit your baby ass down cause your SBC is probably stock as fuck.
Im starting to build mine, which radiator do you have? ( I'll be going big block ) .. I really like the tub'd look ..( and probably needs it ) . I put a 12 bolt with a posi ... Oh yea what digital gauges did you use ??? That looks sweet
1:17 That's why the truck didn't start & the owner should have his butt kicked for doing that, a "Ford Motorcraft Battery" in this beautiful Chevy Truck. Dude, whats wrong with you??? Just bustin your balls man, beautiful truck & looks like a clean job building it.
Not 600, Nice job of putting that engine together. I have 607 hp '84 S15 with a dynode 607 hp engine. Do no have to brake to smoke the tires. Few more beers and the camera guy will lite them up
Wow 😮 the garage mechanics are out lmao .. it’s a great looking truck and the people bitching about the horse power # ‘S are Killing me omg .!! Who really cares watch and in joy. I guess I’ll have to post a video of my truck just to see how many of you guys are really close on your Numbers then show you the Dyno sheet at the wheels .
![[LIVE] : ONE ลุมพินี 76 | คู่เอก "ผึ้งหลวง vs สมิงดำ"](http://i.ytimg.com/vi/9SBshmGQOIM/mqdefault.jpg)
Dasher almost got his ass ran the fuck over 😂
I have watched this video so many times! I love that truck ! Freaking beast
Very NICE . lOVE THE COLOR , The stance , Clean ride ..
Love that style tuck I have a 86. That’s when the built real stuff
Narrator sounds like Rodney Carrington.
Oh, yeah, nice truck.
😂😂😂😂
How or why is doing a burnout scary ? And there is nothing better than getting your tires all nice and sticky and turning around in the dirt. Absolutely brilliant.
the truck is awesome, but you might wanna fire that cameraman!
The small block is talkin! If that was not a cold start it must have HELLA static compression👍👍👍
you know you're a racing family when your dogs name is "Gasser"
Lol, that would be funny, but their dogs name is actually "Dasher".
Nice truck brother 450 horse maybe 475 hp
so good..love tha 80s trucks.pure fucken muscle. ..get some
69 Chevy C10 with a 60s 454 tuned would be better
Love that ol Chevy
Idle is on point very nice setup clean truck for sure
Damn! Looks like everyone on here owns there own 600hp vehicle. No need for a dyno.
The TH-cam trolls can tell you exactly how much hp it makes just by watching this video. Nice truck by the way!!
450 crank power! Shes so clean ac and all 😩😩
Beautiful truck man. Reminds me of mine, except mine's a little more beat up. What kind of paint does she have on her? It looks great. Also, what material did you use on the bedliner?
Definitely one of the best looking C10s I've seen here on TH-cam!
Sweet truck.. Im working on my 84 c10 going with a 468
Now that's what you call a fuckin truck right there lol
Nice monster
Lmfao 600 hp and you have to power brake it to get it to do a burn out no more beer for you guys lol
Lol he has slicks on it without the brake it will just launch
450-475+ but not feelin 600hp.. maybe @ 7000rpms !!
600hp doesn't need a break stand to spin tires, I do it all day rolling @ 30mph.. nice truck bro
Engine sounds very well built.. I would need to know the cam and comp specs to know what its pushing for sure, but its very healthy none the less..
I dont know about 600hp but it sounds damn good. Bout 240 degrees probly
cam sounds good !
That sir is one fine ride fer sure!!
boy I love DA smell of that shyt😂
Same paint as my 80 chevy I painted looks great
It sounds so good he can't even focus the camera
That's what a fuckin truck sound like! Lmao
That motor got good response
Need details on the setup man, that shits wicked
Killer lookin truck for sure
nice a++ truck
Like others have said, that's not 600 h.p., not even close. With the mild cam and aluminum heads it's closer to 425-450, max!
I had the same setup in my '85 GMC, with a 2,300 lockup converter and built 700R4. With the Extreme Energy cam I was running, floor it on the interstate at 70 m.p.h. and it'd keep you pushed back in your seat until you let off the loud pedal.
nice truck all around...
Beautiful burn out I like the video💪🏽😎 keep it up!
right there is one badass son of a b right there
what is that the shifter is mounted on ? a boat seat pedestal ?... why didn't I think of that, I had to build a custom center console to get the shifter up close to me where I wanted it..
You need to put some rubber grommets around the battery cables so they don't short on the bed. That is a nice clean straight truck.
You MIGHT be pushing 400HP, but not anywhere near 600.
I can't blame the camera man if in deed he was drunk because a truck like that deserve to drink in its name. 🍻
Bad ass!! I want a c10 just like that!👍🏻
always thought of building me a 496.. i have a 388 now that makes over 500hp 500tq now
I have an 85 C10 I am almost finished with a full resto. 383 Stroker. I am really looking for build info regarding rear end and suspension setup. Your rear tire size is exactely what I am wanting to do to mine. I would really appreciate feedback as to tire size, and width of axle and rear tub size you used. Please let me know and we can maybe talk later
7 years later with no reply...I'm wanting to do the same with my 94 OBS at the moment :(
That is one Sweet Ride Fellas....
beautiful truck love it
damn that's a nice truck
Throw out a hp. Number and everyone seems to know more about it than you. Your truck is awesome. What i would call a real nice prostreet
very nice truck! alot of work right there. I think me and you would be a good race! my 82 k10 vs your c10. 80s? I think alot of people would like to see that :)
Some times I think I was born in the wrong time, I like every thing old school and love old farms like loud old trucks, no no nothing is old anymore won't be long till they take away gas motors and the world turns robotic......
that’s power.
Clean truck 🔥🔥🔥
i know this is around 5 years old I just seen this video that is one nice truck what size and parts did you have in the motor im building a 94 short step side and looking for that power again slickest 80s model ive seen on here
Should have let the grand kids run the camera
Charlie Roach LMAO
kinda scary my ass that thing is a death machine but i love it
Awesome
why we love old cars ?
Burnouts are nice but get in your truck and video a launch from 0 to 100..as its aimed down the road. Those are the ones that show acceleration😀
This is my first vehicle this year for high school
Perfect
Title of this video should be "how not to record a video" or "how not to be an idiot"... There is a reason racing and drinking don't mix, but some of these guys don't have the balls to sit in and drive a "scary" "600HP" truck other wise. Lmfao
Is the sliding rear window stock? All the ones I see have a one piece rear window.
I just want to see someone dyno numbers.......and someone who can operate a camera.
Matts Madness 3 dyno pulls is like $90. less on dyno days...far from expensive
Matts Madness if that truck is 600 hp then they should have the money to tune the truck on a dyno
daniel roddenberry you're talking about an American v8. the only tuning you need to do is at the drag strip. if he wanted to maximize it for the track..then he would dyno tune it...but at 600hp, whats the point? i can see 800hp+ or fuel options tune...one for race gas and one pump
Dyno tuning is beneficial for any hp level, i do in a few hours what may take a year at the track, you would be surprised at how far off the tune can be.
And for the record a 600hp naturally aspirated sbc takes some fairly serious hardware, it's doable for sure, I've found that most people that have 450hp think it's 600!
Derek Stewart good point, but 600 na for a small block Chevy is hardly radical
makes me wish i woulda took like vids of mine before i totatled it out. Not sure on power, but shop est. it at about 500 at the wheels, fun to hear and drive! AAlso, i'm really questioning that hp ya'll advertising, cus mine would ball a 18" pair of drags without even touching the brakes.
Changed freeze plugs took trans and put back now on drive trans was working what did I do wrong ?
Couple more beers haha 50HP per
sounds good!!!
Remember kids...buzzzzd driving is drunk driving....:-)
I'm gonna Barf on the Camera Man... Sweet truck Though!... Some Engine Specs would be nice though!!!!
Healthy small block
That exhaust note means business! These new mustangs/camaros/chargers/etc with the new aftermarket exhausts sound like crap (to me) with all that damn rasp burble and pop. But your truck sounds "nicety" combo of nice and nasty. lol
damn bro i want that motor
Nice, he kept the AC. That's not 600 hp tho lol
Why do you say that? What do you drive? A honda?
+RizoProduction because I have a 600 hp small block. it takes a whole lot more than what's in this truck to make 600 hp on motor alone.
timmy tyler Sure you do, and my bone stock SBC makes 1200. Cause you know, internet hp is always 3x more than what you actually make.
+RizoProduction Yup, and this truck is 5x because it's in video form :) Won't you go fuck with somebody that doesn't know. Cause you're comments aren't proving that this truck has anything more than 400 hp at the flywheel.
timmy tyler Atleast he poster a video of his vehicle, you're all blow and no go. You know what, You remind me of this kid from my town, he drives around a straight manifold 4 banger ford ranger, and tells everyone he has a "v8 with a stage 8 turbo making 800hp" You're just like him, full of shit.. Post a video of your little "600 horses", and then we can talk, till then, sit your baby ass down cause your SBC is probably stock as fuck.
Im starting to build mine, which radiator do you have? ( I'll be going big block ) .. I really like the tub'd look ..( and probably needs it ) . I put a 12 bolt with a posi ... Oh yea what digital gauges did you use ??? That looks sweet
Beast
she sound good as hell my brother..what kind of cam in it and what mufflers do you have..
Where’d you find that one piece sliding back window for that one?
where did you get the outer chrome trim
What kind of suspension setup is on the rear? Back half? How far did you cut the axle too, I have a 12 volt I'm wanting to build and cut down some
Nice
Looks like a 350 small block
Tru Gaming ....a small block is totally UNDERRATED....seen some awesome CHEVYs running them ...
what kind of exhaust are you running?
I need tips on how I can make my 305 82 Silverado C10 faster
I really would like to know they look nice on the c10's
yeah, pretty tame for an all motor small block putting out 600.
1:17 That's why the truck didn't start & the owner should have his butt kicked for doing that, a "Ford Motorcraft Battery" in this beautiful Chevy Truck. Dude, whats wrong with you???
Just bustin your balls man, beautiful truck & looks like a clean job building it.
Not 600, Nice job of putting that engine together.
I have 607 hp '84 S15 with a dynode 607 hp engine. Do no have to brake to smoke the tires. Few more beers and the camera guy will lite them up
Nice👍
Poor doggo
y la cheyenne APA
What’s the size rim and tires? I like the way it sits
what is the wheel and tire size i want this set up on my 93 wide in back more narow in front
That's a sweet drop, is that a 3/5?
That's one badass truck! Check out my Chevy truck tell me what you think bud
well now his slicks are filled with rocks
Wouldn't really consider them slicks. lol, but he probably did fuck them up burning out on dry asphalt like that.
where did you get all the parts?
Wow 😮 the garage mechanics are out lmao .. it’s a great looking truck and the people bitching about the horse power # ‘S are Killing me omg .!! Who really cares watch and in joy. I guess I’ll have to post a video of my truck just to see how many of you guys are really close on your Numbers then show you the Dyno sheet at the wheels .
If you need to brake torque it you need to put a big block in it lmao
Where u get the LED taillights?
What mufflers you running ?
definitely not 600hp but nice truck for sure
takes a lot to make 600
probably closer to 450ish
Now we got human dyno 🤦♂️
It's 600 HP to Crank or flywheel but probably 490 to 520 HP to the Wheels it's takes a lot of horse to Turn Driveshaft axles rear end..Folk
Bad asss.........
hell yea