Last night I updated my F15 , all modules , exactly step by step with your suggestions and instructions. All perfect . The only difference was that I used VCX se (the chinese icom) instead of e-net cable and it was very fast. HU NBT module less than one hour and 30 min . All the rest only a few min. So I can't thank you enough for the tutorial you made for all of us enthusiasts who love theyr BMWs, and like to work on them. Ones again THANKS A LOT !!!!!!
@@roningumi I had stage 1 remap before , and after the update the softwre was chaged , and I remaped it again . I dont feel the difference ,but is better for sure.
I am new to this. I have a 2011 bmw F10 535i, I believe all my modules are old and needs to be updated. Can I use E-sys to update it like my DME and DSC ? or I need to use ISTA + ? Does the e-sys program comes with the newest CAFD files and i-step?
Thanks for the great video, slightly confused on whether this process is to update an existing module or replace a used module for the car to accept. I've got an F33 (430i) and just wanted to swap out a bad seat module for a used one I bought on EBAY. Same process?
Excellent video. Could you make another video with tips and tricks on ECUflashing? Like Only flash ZGW vía gateway, no others and so. Problems related and how to solve them? I have a F11 from 2012 with CIC instead of NTB. Do you thing it will take so long time? Thanks for all.
Thank you very much for your video. However, I would need some help since I couldn't find the answer anywhere. I changed my AM/FM card to an FM/DAB card. I coded the nbt (FDL), I see DAB in the menu, I wired, changed the ''diversity'', but I have no signal. I think I need to change the settings that tell the motherboard which tuner card it has, could you tell me how to do that please? thanks in advence. Thanks a lot for your video.
Good video. I think you should have cut out the part about "Read VIN" and just shown the correct process, in case someone was following your video live.
Hi my friend! Thank you so much for the videos, makes very easy to enter in this flash/coding world! Im about to flash my HU to get CarPlay fullscreen in my X1 2020 and you make my life easier with your content! Question: do the readings , savings and calculations (FA, SVT, TAL...) generates any changes whatsoever or not? I was wondering if I can poke around before do the flashing. PS: ill use another car running to charge the battery during the flashing.
hi, does anyone know which option needs to be selected (5:09)? Overwrite existing InstalledECUList or Merge with existing InstalledECUList? I am noticing some people using "Overwrite" and others using "Merge". Which one is correct and are there any risks of using one over the other? Thank you!
Hello Francesco, can you help me. I've replaced the ECU for the rear shocks with a used one, which is - of course - programmed for another car. Following your tutorial, I get stuck, because I receive an error saying that the ECU is not coded for this vehicle. So can you tell me how I do the initial coding? Or am I doing something totally wrong here? Thanks!
Very good video I also had trouble with the read vin. The main issue I am having is when I flash something I can't see it next time in the available ECUs to flash. Yesterday I did kombi and fem modules now they aren't showing. Today I did nbt_hu which said 1 hour 25 but it took about 25 minutes with enet. I can't use gateway connection maybe because I use a usb Lan adapter. But anyways. More importantly where are the ECUs once I update them? If you know please help. Thanks
Benim f30 330e kazadan sonra darbe sensörlerini devre dışı bıraktı. Şimdi aracı kullanamıyorum. Araç kendi darbe sensörlerini taktığımda tanımıyor, nasıl tanımlayabilirim? ista+ e-sys'im var. yardımcı olabilirseniz çok sevinirim. teşekkürler
Question: I recently replaced my rear active shock absorbers of my F07 and ISTA-P was capable of programming everything related to those shocks and all the surrounding modules. I am fairly sure i can use ISTA-P to basically upgrade the firmware of my entire car. Can you explain the preference for E-SYS vs ISTA-P? Can it do more? Thanks for an awesome video!
ISTA is fine in the official network, if you update at home you should manually update every single ecu with the procedure I showed in my video on Esys;)
well done, I played with e-Sys back in 2015 when I bought my F10 520D and I managed to make some changes to some settings but I have always been puzzled by the crazy complexity of e-sys and the total lack of documentation. As a software developer myself I am really shocked by how a company like BMW couldn't put together anything better than this :) For example here how do you know which ECUs to update? Will these changes potentially affect the engine maps? I assume people use different applications to tune cars, not e-sys.
You made a fantastic video Mate! Thank you for the effort! I'm thinking about flashing my F20 1er and I'm going to follow your diy. I want to make sure that I flash it via UDS protocol instead of HTTP. How do I make sure that I'm flashing via UDS? Btw: what's the diference between UDS and HTTP? Sorry for the dumby questions! ;)
Ciao Francesco, ho bisogno di fare il tuo stesso procedimento per aggiornare HU entrinav2 ma non ho una BMW ma una mini countryman jcw, possiamo sentirci in pm? grazie mille a te e ai tuoi video
Launcher is only needed for FDL coding. Don't take my word for it but I believe they recommend starting without the launcher since the launcher injects code into E-Sys. You want E-Sys to be as 'pure' as possible as to not cause any unforeseen issues (crashing).
Why i'm not getting any info in KIS/SVT Target? I dont have any I-Step(shipm) or (target). I can't select anything. not available. Anyone has any ideea? 😢😢
Man! It was thrilling just to watch that! I did flashed many different HW devices and i also bricked many of them in the past. What would you do, if an ECU got bricked?
![[LIVE] : ONE ลุมพินี 69 | คู่เอก "กุหลาบดำ vs นาบิล"](http://i.ytimg.com/vi/PNM6U8e_HMo/mqdefault.jpg)
Attach the seat belt so that the ignition never switches off by itself is a tipp for ecu flashing.
Thank you, one of the more detailed , simple to follow videos !
No è la coppia prescritta dalla Casa
Last night I updated my F15 , all modules , exactly step by step with your suggestions and instructions. All perfect . The only difference was that I used VCX se (the chinese icom) instead of e-net cable and it was very fast. HU NBT module less than one hour and 30 min . All the rest only a few min. So I can't thank you enough for the tutorial you made for all of us enthusiasts who love theyr BMWs, and like to work on them. Ones again THANKS A LOT !!!!!!
Have you notice any improvements with car specially the DME??
@@roningumi I had stage 1 remap before , and after the update the softwre was chaged , and I remaped it again . I dont feel the difference ,but is better for sure.
Hi, for some reason on BMW f15 it give error when clicking read SVT. I have searched on forums and some models it's fine to read as ECU instead.
I am new to this. I have a 2011 bmw F10 535i, I believe all my modules are old and needs to be updated. Can I use E-sys to update it like my DME and DSC ?
or I need to use ISTA + ? Does the e-sys program comes with the newest CAFD files and i-step?
@@ceddy1031 you can use esys and enet cable. You also need power supply for battery. You have to download latest psdzdata.
Thanks for tutorial,you saved my life today...
Excellent tutorial. Can't wait for the next one. Thanks
Thanks Man! :-)
Great video just on time. I have replaced my tms module and now i have to program it. I will try to do it today. 👍👍👍
Thanks Man! Good Job! :-)
Thanks for the great video, slightly confused on whether this process is to update an existing module or replace a used module for the car to accept. I've got an F33 (430i) and just wanted to swap out a bad seat module for a used one I bought on EBAY. Same process?
Excellent! Well done. Thank you
thank you very much for you effort you made to share knowledge to every one .
Thank You For Watching! :-)
thanks for this video is very very good and we need more
Thanks Man! :-)
Excellent video. Could you make another video with tips and tricks on ECUflashing? Like Only flash ZGW vía gateway, no others and so. Problems related and how to solve them? I have a F11 from 2012 with CIC instead of NTB. Do you thing it will take so long time? Thanks for all.
Thank you very much for your video.
However, I would need some help since I couldn't find the answer anywhere.
I changed my AM/FM card to an FM/DAB card.
I coded the nbt (FDL), I see DAB in the menu, I wired, changed the ''diversity'', but I have no signal.
I think I need to change the settings that tell the motherboard which tuner card it has, could you tell me how to do that please?
thanks in advence.
Thanks a lot for your video.
Is the flash procedure in two parts? I see it completes one flash, you clear fault codes and then start a second flash?
Good video. I think you should have cut out the part about "Read VIN" and just shown the correct process, in case someone was following your video live.
Can i do the same steps like you showed in a G-series?
Hi my friend! Thank you so much for the videos, makes very easy to enter in this flash/coding world!
Im about to flash my HU to get CarPlay fullscreen in my X1 2020 and you make my life easier with your content!
Question: do the readings , savings and calculations (FA, SVT, TAL...) generates any changes whatsoever or not? I was wondering if I can poke around before do the flashing.
PS: ill use another car running to charge the battery during the flashing.
Very comprehensive tutorial, well done! Do you have a document (pdf) of this video?
For flash only, do I still need a launcher or something like that?
Is this the same step for coding a new headunit? Don’t do I need to reset it?
its enough the power supply 90A? thanks alot for the tuto
I don't have a charger and I only need to update the PMA module which only would take 5 minutes, would be safe to flash?
Great video.👍
How about flashing in HTTP via icom?
Same risky?
Thanks
if i purchase a KAFAS4 with all FSC applied can i use it on a different vin?
Hello, is correct to update all the modules? if you want to update only one/two, where can you see their dependencies?
Thanks,
tenx for the nice lesson
I don’t have transmitter in External applications. How to get that?
hi, does anyone know which option needs to be selected (5:09)? Overwrite existing InstalledECUList or Merge with existing InstalledECUList? I am noticing some people using "Overwrite" and others using "Merge". Which one is correct and are there any risks of using one over the other? Thank you!
Hello Francesco,
can you help me. I've replaced the ECU for the rear shocks with a used one, which is - of course - programmed for another car. Following your tutorial, I get stuck, because I receive an error saying that the ECU is not coded for this vehicle. So can you tell me how I do the initial coding? Or am I doing something totally wrong here?
Thanks!
HI whats your name brand this battery charged??
sir wht is different between ecu flash and ecu software update .....any different
Whats trasmitter program?
It only shows line 4 ECU’s when I upload the SVT_tal and SVT_soll in the TAL processing 😢
Very good video I also had trouble with the read vin. The main issue I am having is when I flash something I can't see it next time in the available ECUs to flash. Yesterday I did kombi and fem modules now they aren't showing. Today I did nbt_hu which said 1 hour 25 but it took about 25 minutes with enet. I can't use gateway connection maybe because I use a usb Lan adapter. But anyways. More importantly where are the ECUs once I update them? If you know please help. Thanks
if the ecu has already been updated to the latest software, it is normal that you no longer see them in the list of those that can be updated
Benim f30 330e kazadan sonra darbe sensörlerini devre dışı bıraktı. Şimdi aracı kullanamıyorum. Araç kendi darbe sensörlerini taktığımda tanımıyor, nasıl tanımlayabilirim? ista+ e-sys'im var. yardımcı olabilirseniz çok sevinirim. teşekkürler
Thank you Sir
How do you get led lighting under the driver steering wheel trim
th-cam.com/video/2-lx0VZiHE0/w-d-xo.html&ab_channel=FrancescoGalante
Nice Video, can you also make a video for retrofitted ECU? I have NBT EVO in a Pre LCI Car, is the flashing proceed the same?
Yes!
Ottima guida ma una domanda: "se l'auto è OK perché molti si spendono per aggiornare l' i-step? Che vantaggi se ne trae?". Grazie
Hey I’m running a custom tune and want to go stock does anyone know if I can just update my dme this way and it will return to factory software?
Just did that and resets everything you flash.
Question: I recently replaced my rear active shock absorbers of my F07 and ISTA-P was capable of programming everything related to those shocks and all the surrounding modules. I am fairly sure i can use ISTA-P to basically upgrade the firmware of my entire car. Can you explain the preference for E-SYS vs ISTA-P? Can it do more? Thanks for an awesome video!
ISTA is fine in the official network, if you update at home you should manually update every single ecu with the procedure I showed in my video on Esys;)
Do you have process on how to code new shocks in either ESYS or ISTA-P?? Would be very thankful for that. Car is 2015 F11
Bravo 👌
Grazie! :-)
we have bmw f10 need update DME software can tell about
Same Procedure for All Ecu's :)
Flashing the NBT drive, does it take about 6 or 7 hours?
The video only takes a few minutes.
Can you clarify that for me, thanks.
45 min
If your stuck I can do it remotely
How do I flash and change tunes like what MHD does without needing to buy their license?
Sorry Man I Don't Know!
Can you DM me where to get the E-sys & Launcher you used?
Mhhauto Forum ;)
Hi, great vid, will this allow split screen carplay to become fullscreen carplay? And if so, will i have to activate carplay again using the fsc code?
well done, I played with e-Sys back in 2015 when I bought my F10 520D and I managed to make some changes to some settings but I have always been puzzled by the crazy complexity of e-sys and the total lack of documentation. As a software developer myself I am really shocked by how a company like BMW couldn't put together anything better than this :)
For example here how do you know which ECUs to update?
Will these changes potentially affect the engine maps? I assume people use different applications to tune cars, not e-sys.
esys wasn't meant for end users or dealerships, it was used in the factory to program cars after they're built.
You made a fantastic video Mate! Thank you for the effort!
I'm thinking about flashing my F20 1er and I'm going to follow your diy. I want to make sure that I flash it via UDS protocol instead of HTTP. How do I make sure that I'm flashing via UDS?
Btw: what's the diference between UDS and HTTP?
Sorry for the dumby questions! ;)
I am also trying to figure out how to select protocol, but can't any info in that area. Did you find the way?
@@AndreyChugay Hi! I didn't. I just followed the procedure from the tutorial when I updated my DME and everything went well!
Hi
I have f10 530d 2013 model
Where can I get latest data files for esys
Thank you
MhhAuto
Ciao per il flasching dell’nbt serve per forza l’icom? O riesco con l’enet?
Va benissimo l'ENET, infatti l'ho fatto con quello
Ciao Francesco, ho bisogno di fare il tuo stesso procedimento per aggiornare HU entrinav2 ma non ho una BMW ma una mini countryman jcw, possiamo sentirci in pm? grazie mille a te e ai tuoi video
Is there a reason why you're using E-SYS and not ISTA-D to update your ECUs ? is ISTA-D going to brick up my NBT if I try to update it with it ?
Yes 😊
The progress bar after the flashing is yellow instead of green. What does that indicate? Where can I see if there are any fails?
Check with diagnostics
@@cmarriagecmarriagewhat do you mean???
@@cmarriagecmarriage
Hello! Could you help me flash just my instrument panel remotely?
Minute 1:01 , 'Start E-Sys without Launcher and connect the car via VIN' Is it really necessary to start E-Sys without Launcher Pro ?
Thought the same. Could it be that the launcher is only needed for coding? By the way.. which launcher do you use?
Launcher is only needed for FDL coding. Don't take my word for it but I believe they recommend starting without the launcher since the launcher injects code into E-Sys. You want E-Sys to be as 'pure' as possible as to not cause any unforeseen issues (crashing).
Why i'm not getting any info in KIS/SVT Target? I dont have any I-Step(shipm) or (target). I can't select anything. not available.
Anyone has any ideea? 😢😢
I can help you remotely :-)
Don't think my psdzdata is up to date. I'm downloading something now.
@@FrancescoGalante91 can you give me a hand? I still have no I-Step. Realy apreciated. Thanks
Can you include the torrent where you downloaded esys with the full psdz?
Search on Google :-)
th-cam.com/video/S9IxVydWU5A/w-d-xo.html here it is
i know it’s been six months and you have probably already found it but i figured why not link it to you just in case
Man! It was thrilling just to watch that! I did flashed many different HW devices and i also bricked many of them in the past. What would you do, if an ECU got bricked?
First I would try to resurrect it, otherwise I would buy a used one ;)
Ciao, sai per caso come eliminare il sistema ADblue(solo informaticamente) ? grazie :D
Si fa dal ecu non con esys
@@abelszollosi6066 che tool serve ?
@@iuliang6113 Bisogna rimappare la centralina motore ;)
100 procent
Bro you went to fast ! Slow down can't read all that
Another crooked guy got into programming a BMW with a crap power supply...