How to test your starter motor & solenoid - Starter troubleshooting
ฝัง
- เผยแพร่เมื่อ 16 เม.ย. 2014
- How to test / troubleshoot / check a starter for correct operation: starter test / starter solenoid test / starter motor test
Troubleshooting, diagnosis, repair auto, automobile, car, vehicle maintenance tools parts accessories engine mechanics do-it-yourself diy tutorial tuto
This video does not constitute or replace a real specialized technical manual, and was only made for convenience and educational purposes. "TutoBuild Eng" makes no warranties of any kind and accepts no liability. "TutoBuild Eng" cannot be held responsible for any damage caused to devices or persons using information contained in this video. The use of the information contained in this video is at your own risk. - ยานยนต์และพาหนะ
Some people are naturally born with teaching skills. Mind blasting tutorial! Outstanding👌 God bless you!
Thank you, This was an excellent video, that got straight to the point of exactly all the ways to test my starter/solenoid and know if it's bad or not without a bunch of unnecessary time wasting extra content. I salute you sir! Keep up the great content!
Thank you so much for this tutorial. It's exactly what I need to know without 10 minutes of waffle.
Great Video! Straight forward, scripted so we could pause and follow. Really helped me diagnose my 81 Delco Remy . Cheers
Excellent! Still helping folks after all these years!
Best video on youtube for Starter and solenoid troubleshooting. Thank you!
Excellent video! Straight to the point and checks all components. 👍
Thanks your video saved my butt getting my Kubota running after a snow storm and I tried several things over a couple hours. Watched this and with a screw driver jumped positive to ignition paddle on solenoid- starter kicked in. Used key for glow plugs and did it again - tractor started right up. This tells me ignition not sending enough volts to starter. BUT I can simply install a momentary push switch to solve the issue. Thanks again
Excellent and thorough. Exactly what I needed to learn. Thank you!!
Ten times better than going to school. Learn heaps in 3 minutes. Thanks dude
Thank you for this! Really helped me ensure I wasn't spending money on a starter for nothing. Appreciate you taking the time to make and post this.
Short and to the point, thanks!!!
this is what I was looking for to understand how motorcycle starter system works, thanks a lot!
Gu. .
The guys disliking this tutorial are these who throw their working starters without testing it. Perfect video.
VERY helpful. thank you. worked just like you explained it. I was able to determine it was my starter.
Great video, very helpful and to the point. wording needs to stay up for twice as long.
Best starter motor video on U tube hands down. Cheers bloke
Nice and simple. Excellent work, brutha!
Thanks for this video. It helped me a lot
Good info, nice layout too. Thank you.
Very good explanation
Excellent demo. George C.
Brilliant, many thanks for posting!!
Thank you very much ! Now I am not confused, and I can check the starter motor 👌👌👌👋
loud and clear sir!
this is a great video. No bullcrap
I agree with all the commenters who commend you for not including a bunch of fluff and getting right to the point. I hate the videos of people who love to hear themselves talk and and who use stupid exaggerated gestures and corny intros. My time is valuable. Your video was very informative. It made perfect sense. Going to test my tractor starter tomorrow.
just tested mine the motor is f,,, and so is the solenoid ,, new all round thank s bud good vid
Great video! If I want to run these tests myself, does anyone know the name for the leads I'd need? I have a multimeter
Superb video. Other videos are not as comprehensive on what to check out, such as the solenoid failure mode and checking for voltage.
Excellent fairplay.
That was awesome demonstration. Even an idiot like me could understand. Thank you.
Excellent video. Thank you.
Great informative video sir 👍 👍 👍 great work sir 👍 👍 👍 best regards for the future videos 👍 👍 👍 👍
Very well done, clear and precise this.. cheers great help 👌👌👌💯
straight to the point very helpful
Informative video... Thanks for the upload
thanks very simple and helpful
Good video, very good, just instructional
Thanks for this it helped me test my motor :-)
Mоdеrn day ѕtаrtеr motors are dirесt сurrеnt еlесtriс mоtоrѕ with a
starter ѕоlеnоid that drаw сurrеnt frоm a bаttеrу. A vital соmроnеnt
within automotive еnginеѕ whеrе thеу induсе rоtаtiоn in the еnginе ѕо
thаt the аutоmоbilе can mоvе. dont forget to consult with manyautosltd.com
Brilliant exhibition.
Excellent video. Thank you!
Great video, thanks a lot
No bla bla bla, just to the point.
Great video.
Thx!
Great tutorial thanks alot
Thanks man great tutorials
Great video thanks for you demo 👌
Great video!!
Thanks for this!
Thank you brother 😍
Very nice, thanks.
Connected the positive cable to the positive battery terminal and then to the ignition part of the starter, then I connected the negative to the body of the starter; when I connected to the negative terminal of the battery it kinda sparked and left a mark on the terminal...and the pinion moved forward and did a slow rotate thing...I'm confused ayy
Brilliant..... thank you :-)
how much current does the solenoid draw?
how much current does it takes to run
Thank you ,sir.
can i use this to make ebike?
Hi I have a chev diesel motor when i put a charged battery in and go to turn it over it sounds like the battery is flat does it sound like the starter
Very thanks !!!
Thank you, I checked using video, both solenoid and motor works but I couldn't work out how to wire to test the voltage using the multimeter, the video doesn't show what wire goes where, can you explain please?
am student of NIT but i like to understand more about automotive.
U can talk me appeox rpm of indica diesel starter??
Which value peak amp. Gain on load?
The starter sticks on my boat and when it does kick in it barely turns the motor over with the plugs out even. I hate myself because its on the bottom and im going to get really drunk now. Thanks for the video when i get up with a shitty hangover i will be able to test it but i know already its bad.
When the motor pinion often stuck, what do I need to fix? It usually works but sometimes stuck. Do I need to replace the magnetic part or motor part?
Hur länge tar det att byta startmotor på en citrengc5 3.0
Thank you
Hi, i want to test the solenoid of the starter motor without to dismounting it from the car, can i do this whitout making damage? obviously i disconnect battery from the car before. Thanks. When you are writing that the internal contact of solenoid is bad in the video instead i think it's only the tester probe that doesn't make contact with metal of the bolt, it is covered of dirt.
I got a used one OEM starter in ebay and now I know how to test it before installation. Thanks for the excellent video.
By the way, anyone how how long starter will last for a Toyota Corolla (it has 190,000 miles), about time go bad ? Thanks
iwant to know which why is easy to fix and to test the engine and the names of equipment that needed when fix it
Fantastic
Hello I have a question important .is me can to use of Motor starter the car this in the game scooter baby weight 25 kilo please respond and thank you ???
Simply nice and helpful to all Dr.K.Prakasam
dose it need to move freely also by moving with fingers ? or it needs to be very hard ?
very nice
2:33 Test 4: Electrical motor testing - Would it be safer to use the thicker red cable instead of this think tester cable and probe?
I had a 1 click when I started my 2002 tahoe keep clicking and eventually it would start. Oreillys tested it 5 time checked ot good. Replaced it anyway and now it works perfect.
The video helped me Alot
Btw what is the spade ?
Late reply but in case future viewers have this question, the "spade" mentioned is just a small tab of metal that a cable (from the ignition) connects to.
Hlw sir, can you plz help me to know, how I can calculate what size of AH battery do I need to start a 10 KW self-starter. Plz explain with formula
Thanks a lot, the best explanation. I know repeating myself. How many times can I press the subscribe and lake buttons.
Thanks your sir
i did all these tests and the starter was still defective, it would push out and spin but with NO load, once you put the engine load on it, it would not crank the motor.
very good
Hi, where could be a problem, if starter rotates, but pinion doesn't push out? Starter is new. I changed it, because of this problem. It hapenned on my last ride before winter time. When I was running on highway, engine stall suddenly. So I glided to the highway exit and put cas aside and tried to start engine, but it didn't. Only starter was moving. We towed to my garage and there I noticed, that starter didn't move with crankshaft. I tried to change starter relay, but it didn't help.
thx a lot!!!
Where can I buy the lead you used to bridge the connection?
thanks!!!
Which starter is this
Why the pinion should spin without moving forwads ? Its problem the selenoid starter ?
So these sound much like a power drill when freed from the engine. Never heard the whine except on some buses when the engine went idle and the pinion was released. Thanks for the video.
thanks for this video, now i know my problem: this is solenoid internal contact, because connecting motor directly, it work. if i open solenoid and clean this contact, maybe can i repair it?
Yes!
That thing really goes
Cum se demontează electromotor la Audi a 4
wat happens wen u connect it to a 3phase
how can i fix the problem when the pinion moves forwards but does not rotate and i cant fix it with the hammer?
helpfull for the most part! but i know your not suppose to bang on the starter because then it fucks up the brushes or permanent magnets inside then your screwed and need to replace the starter. Why dont you just open the starter up and fix the the problem directly?
my starter motor is fine but sometimes it fails to turn when hot, what should i do? its a corolla 2003
Dhaka Music i have the same problem with my corolla . did you find the solution?
Perfect
Great!
Connected it backwards before watching video , put negative on ignition tab , possitive on the terminal . Will this have burnt it out ?
no. Tab is just turn run current through the electromagnet coil of the relay. Relays works same way no meter the polarity.
can the issue also be that it spins but does not move forward ?
Hi Farerse ... not really possible unless you have the heavy wire from your battery or alternator connected to the wrong terminal on your starter ... it acts as a relay switch ... when the solenoid is energised via the ignition it pulls a piston inwards (pivoting the gear forward) and a circuit is made within the solenoid housing allowing the current to flow from the heavy wire on the solenoid case across to the other heavy wire that feeds the starter motor ... when you release the ignition the solenoid is de-energised and a spring pushes the piston forward breaking the feed to the starter motor and pivots the gear back in.