The video is great but I'm less than 10 minutes in and I've found 3 mistakes or differences between the video instructions and the supplied instructions. 1: you say to use a 150mm m12 when it should actually be the 140mm m12 as per the instruction book. 2. You dont mention the installation of crush tubes on these aforementioned bolts, the instructions say to put a crush tube. 3. You say to use 3x m12's and 1x m8, this last bolt is actually an m10. These mistakes or differences are all during the installation of the chassis brackets
Are you sure about that? My understanding is that after a certain size and torque, the nuts shouldnt ever be able to come loose through vibration anyway, Toyota dont use nylock nuts for their m10 + sized towbars or bullbar bolts either
Great vid, one question, the rear camera is that affected by the carriers or rear wheel location. It does seem to have the camera field of vision compromised. Again great content.
The Camera relocation to the centre of the bar isn't affected but the location of the carriers at all and you will have clear vision with it, but it is different to the original camera location.
Hi Chris The rear bar kit comes with a plug and play wiring loom that plugs into the vehicles wiring loom and then connects to the rear bar combination lights. It also provides connections for your trailer plug and the relocated number plate light.
Really love the kaymar rear bumper, but really hate the rims and tyres combo. It's not really about the size though I'll prefer the 3 inch lift with 35s. Stock rims are as ugly as the vehicle and i would definitely put on aftermarket rims. Steel rims would definitely looks better than the ones in this very car
Yes!!!! Best rear bar company period. Can't wait to order mine for the 300. Thanks for posting this.
What an awesome vid........very thorough. Well done.
Thanks Jack, Glad you liked it!
とても分かりやすくカッコ良い!!
ランドクルーザー300が同じ色です！
LANDCRUISER ❤️👍🏻
great video
The video is great but I'm less than 10 minutes in and I've found 3 mistakes or differences between the video instructions and the supplied instructions.
1: you say to use a 150mm m12 when it should actually be the 140mm m12 as per the instruction book.
2. You dont mention the installation of crush tubes on these aforementioned bolts, the instructions say to put a crush tube.
3. You say to use 3x m12's and 1x m8, this last bolt is actually an m10.
These mistakes or differences are all during the installation of the chassis brackets
Those nuts would surely come loose after a few hundred kilometers...Why weren't nylocks used?
Are you sure about that? My understanding is that after a certain size and torque, the nuts shouldnt ever be able to come loose through vibration anyway, Toyota dont use nylock nuts for their m10 + sized towbars or bullbar bolts either
Great vid, one question, the rear camera is that affected by the carriers or rear wheel location. It does seem to have the camera field of vision compromised. Again great content.
The Camera relocation to the centre of the bar isn't affected but the location of the carriers at all and you will have clear vision with it, but it is different to the original camera location.
Awesome video but how does the rear tail lights work? You didn’t show where they plug into
Hi Chris
The rear bar kit comes with a plug and play wiring loom that plugs into the vehicles wiring loom and then connects to the rear bar combination lights. It also provides connections for your trailer plug and the relocated number plate light.
Really love the kaymar rear bumper, but really hate the rims and tyres combo. It's not really about the size though I'll prefer the 3 inch lift with 35s. Stock rims are as ugly as the vehicle and i would definitely put on aftermarket rims. Steel rims would definitely looks better than the ones in this very car
No wonder a roo has no problem pulling the back bumpers off .
I’d like to see thread lock seal or nilock nuts fitted .
Can the spare wheel go on the right hand side? Brian
Hi Brian, yes the wheel carrier can be located on either side.
Where does the number plate get mounted please?
My kaymar
How much can effective the towing capacity after installing this kit ?
Hi There, the towing capacity of the 300 series is unchanged and the towing capacity is the existing capacity of the LC300
Na You blocked the rare camera and the land cruser parking sensors i hope you figur better installation way
Im disappointed with the mount of shims that have to be used if is truly made properly it some all line up
What about oil catch can😊
Will it fit on a LX600? In the USA, we only get LX600.
where is the reverse camera relocated to?
The reverse camera is relocated to the centre point of the bar.
كم هو سعر هاذ المصد الخلفي الراع ومن اين يتم الطلب وشكرن
This is Australia, you can go to their website
Went to order one today via ARB and told 6 months lead time for my LC300. Pathetic…
👍
Nightmare to align