What was the hp & torque from the factory? Also watching the RPM Guage, I seen the needle bounce hard a couple times, = Is the engine begging for more fuel & air? Or valve springs or ????
Dan Lutze they don’t for that bike. Any 2020 low rider s you see with a road warrior fairing has a custom light bracket made. Memphis Shades is absolutely dragging ass on this. Really frustrating
I don’t know how you got that shade to fit. Unless it’s bungling brackets as Memphis shades don’t yet make the brackets to fit the thicker forks. They are making parts inc headlight extender for likely availability end of jan 2020.
Got the fairing and the headlight block. Can't get headlight flush, can you link the parts you used. I have the Memphis shades road warrior 11 inch shield. Just this damn headlight holding me back? Any help is much appreciated.
interesting. Thought the hp would be higher. Got a 18 low rider with harley power cam, fab 28 and dyno jet tune. 109hp 114tq. Maybe its just the dyno..that or the cam makes that much of a difference. Wish i had the low rider s thought, with the inverted forks and dual disc
Not bad numbers for just an exhaust and screaming eagle tune. If it had a dynojet power vision it would probably make a little more power. If I had that bike I would use the screaming eagle stuff to keep my warranty.
yeah, the sporty made 92hp and I cant remember the torque number at the moment. Hopefully when I get her back up we'll go again. she's torn apart at the moment :(
@@Eidrian111 the cam itself is like $180 but the cam kit with the chest plate and oil pump is 1200-1400$ then add labor if you have a shop install it probably cost in total $2500-$3000
Jacob James it’s 100% true, any M8 not in compliance with EPA gets its power train warranty flagged. Might be able to sneak it by since it’s stilled tubed with the SE tuner but an FP3 or PV voids your warranty as soon as they plug the digital tech in to your bike.
Tell him to take that fairing off it. Looks like shit with it on there tbh. I mean it doesn't make it look better one bit, why would anyone put that shit on their bike? Not blocking the wind or anything id understand that if it were.
I think I like that Barracuda better than the black this time around. What a great bike!
Love the sound of that pipe!
What was the hp & torque from the factory? Also watching the RPM Guage, I seen the needle bounce hard a couple times, = Is the engine begging for more fuel & air? Or valve springs or ????
Where can I get this windshield? I have been looking for it for a long time. Thank you
I thought stock the bike put out 100.5 hp. What were your final numbers?
Where you at bro? Hope all is well. Haven't seen a vid from you in a while and I like your channel. Any updates?
Who made that bracket and headlight extension for the Road Warrior fairing ?
Memphis shades do bro lol
Dan Lutze they don’t for that bike. Any 2020 low rider s you see with a road warrior fairing has a custom light bracket made. Memphis Shades is absolutely dragging ass on this. Really frustrating
Which bars and windshield is that.. also which seat?
Havoc D saddleman seat, stock bars just on some risers, and the windshield is Memphis shades, not sure what height looks like 11 inch
Hey man what Memphis shades faring did you find to fit or what bracket? I emailed them and they had no answers for me.
@@unwanted_4runner they are actually Wild 1 Streetfighter 14'' bars, but yes its a memphis shades 11"
100hp 114tw on mine. SE POWER CAM
I don’t know how you got that shade to fit. Unless it’s bungling brackets as Memphis shades don’t yet make the brackets to fit the thicker forks. They are making parts inc headlight extender for likely availability end of jan 2020.
Does anyone know if they had to get the fairing color matched? Or if anyone makes a Barracuda Silver fairing?
I’m confused... stock the bike has 119 torque so it lost 4 foot pounds of torque?
that would be because Harley Doesn't measure horsepower or torque at the wheels
Got the fairing and the headlight block. Can't get headlight flush, can you link the parts you used. I have the Memphis shades road warrior 11 inch shield. Just this damn headlight holding me back? Any help is much appreciated.
What fairing is that?
interesting. Thought the hp would be higher. Got a 18 low rider with harley power cam, fab 28 and dyno jet tune. 109hp 114tq. Maybe its just the dyno..that or the cam makes that much of a difference. Wish i had the low rider s thought, with the inverted forks and dual disc
Is that a 7” headlight ?
Is that 91bhp at the wheel or crank?
wheel
Fast-Action Jax, is that the same LowRider S you test drove 2 months ago? So do you like this set up? I hope the owner helps you get your dream bike.
What fairing mount kit is he running? I have a Memphis Shades Road Warrior fairing kit for my 2020 LRS and MS said they don't make a kit for it yet.
The fairing looks like the quarter fairing that Harley offers aftermarket. I know Harley has a mounting kit for that.
Not bad numbers for just an exhaust and screaming eagle tune. If it had a dynojet power vision it would probably make a little more power. If I had that bike I would use the screaming eagle stuff to keep my warranty.
Didn't your sporty get similar numbers in the HP after the engine work?
yeah, the sporty made 92hp and I cant remember the torque number at the moment. Hopefully when I get her back up we'll go again. she's torn apart at the moment :(
Hey Jax. What faring did you end up finding to fit? I emailed Memphis shades and they told me they had nothing.
If u don't post the numbers what are we watching, just u beating on a customers bike?
Try the S&S 475 Cam - You can get a 100+ HP / TQ with it.
How much does that cam go for?
@@Eidrian111 the cam itself is like $180 but the cam kit with the chest plate and oil pump is 1200-1400$ then add labor if you have a shop install it probably cost in total $2500-$3000
@@Eidrian111 124/128 with comp 246a cam only.
What height does a guy need to be to see over that windshield?
Adrian Rubi I’m 5’6” and I can see over the windshield but not right in front of my tire.
Did you buy a new bike? I can see you on this!
Please do this bike with a power cam...no one on the internet has dont it
I have .
@@MlMlMIEURO and?
Edward mac SEpower cam 100hp - 114 tq . Pushroads n lifters. No dyno tune just se flash tune
I think my iron is on borrowed time 😂 I need this bike
Stormtrooper 2439 I just traded my Iron for this beauty a few days ago
About to trade my iron 1200 in for this as well 😂
the numbers reported by harley are probably at the crank...calm down everyone
B4 video plays my guess 78hp
Dude that is so sad 450cc single cylinder makes 75 hp that thing barley broke 90hp once hehe tinkle tinkle
Get rid of that garbage tuner and it would make more power. Warranty is already voided with that pipe anyway.
That's not true
Jacob James it’s 100% true, any M8 not in compliance with EPA gets its power train warranty flagged. Might be able to sneak it by since it’s stilled tubed with the SE tuner but an FP3 or PV voids your warranty as soon as they plug the digital tech in to your bike.
As long as you use se tuner put whatever pipe you want on the 18 and later M8s early 17 M8s are able to run any tune
My bike came with TBR...warranty definitely intact. Stop the spread of misinformation.
Tell him to take that fairing off it. Looks like shit with it on there tbh. I mean it doesn't make it look better one bit, why would anyone put that shit on their bike? Not blocking the wind or anything id understand that if it were.
You are the 1% my friend......There is literally an entire culture behind cafe/tsport fairings.......you should get out more