TWO BROTHERS RACING 2-1 SHORTY Install for Harley Davidson M8
ฝัง
- เผยแพร่เมื่อ 5 ก.พ. 2025
- Amazing set of Pipes from TBR Part Number 005-4870199-B. For the short time I rode this bike after the install, I'd have to say this exhaust system is right there at the Top with some of my Favorite exhaust systems. I will let the video say the Rest!
Subscribe here for Future Installs, Travel, and Reviews
www.youtube.co...
Share this video with a friend - • TWO BROTHERS RACING 2-...
Also, Let’s Connect :
Shop - www.raiderworl...
Facebook - / raiderworld72
Instagram - / raiderworldinc
Email - raiderworld1942@gmail.com
Music by - Epidemic Sound www.epidemicso...
As a disclaimer, I am not a Harley Davidson or Motorcycle Mechanic. I’m just someone, like most of you watching these videos, who likes to wrench in their own garage or shop. As an Amazon Associate, I earn from qualifying purchases at no extra cost to you. Any Amazon Links you click below and complete a purchase, I receive a small commission. This helps me to buy more parts or tools needed to install and review on this channel.
"As an Amazon Associate, I earn from qualifying purchases"
TOOLS:
TEKTON 91804 Quick-Release Swivel Head Ratchet Set
amzn.to/2OHff3X
ARES 40003-20-Piece Socket Adapters and Extensions set
amzn.to/35ac4df
Pass-Thru Socket and Ratchet Set
amzn.to/3FSfDBZ
TEKTON Deep Socket Set
amzn.to/3oUKach
DEWALT Impact Socket Set
amzn.to/41uiFXE
Allen Wrench Set, Premium Hex & Torx
amzn.to/3oWkq23
LEXIVON Master Hex Bit Socket Set
amzn.to/3t2fCW0
LEXIVON Torx bit Socket Set
amzn.to/31XL7Vc
TEKTON ¼ Drive Torque Wrench (20 - 200 in-lb)
amzn.to/3t3y9kF
TEKTON ½ Drive Torque Wrench (10 - 150 ft-lb)
amzn.to/3wFgG4h
GEARWRENCH 3/8" Drive Micrometer Torque Wrench 30-250 in/lbs
amzn.to/3AHwhUt
Adjustable Digital Torque Wrench 2.21 to 44.24 ft-lbs
amzn.to/3Lodxy7
Wheeler Manual Firearms Accurizing Torque (F.A.T) Wrench with Inch/Pounds
amzn.to/3EzThXa
Thread Restorer Kit
amzn.to/3JQlYCZ
GEARWRENCH Stubby Flex Head Ratcheting Combination Wrench Set
amzn.to/3bFNrWP
Stubby Impact Socket Set
amzn.to/3IqTyOz
Stubby Bit Set
amzn.to/3Mf42Sb
T Handle Torx Wrench Set
amzn.to/3Hs9Ypo
T Handle Allen Wrench Set
amzn.to/40W2GB4
TEKTON 3/8 Inch Drive Long Hex Bit Socket Set
amzn.to/3liUr3y
Milwaukee M4 Screwdriver Kit (Also makes life a little easier)
amzn.to/2OHg1xT
Precision Pick and Hook Set
amzn.to/3cYy0Zr
Long Nose Plier Set
amzn.to/42s0CT2
Rhino Motorcycle Straps
amzn.to/3gRI8Fi
Loctite Heavy Duty Threadlocker- Blue (This is a no brainer)
amzn.to/3ctM902
Powerbuilt Vinyl Protector Pad Mat (Protect your Parts)
amzn.to/3t6R3qy
Parts Blanket Protects Against Scratches
amzn.to/3GAumEi
OEMTOOLS Tool Cart
amzn.to/3crvevi
Husky Magnetic Bowl (Don’t lose your bolts)
amzn.to/3bDiXom
GOPRO SET UP:
Drone DJI Air 2-S Fly More Combo
amzn.to/3i80LXd
Simpson Helmet Mod Bandit
amzn.to/3VvYmaL
GoPro Chin Mount
chinmounts.com/
GoPro Hero 10 Black
amzn.to/3S404h5
GoPro Hero 8 Black
amzn.to/3vsSXnA
GoPro Hero 7 Black
amzn.to/3IBAydH
Gobe NDX 52mm Variable ND Lens Filter
amzn.to/3KYBY3q
ULANZI G9-5 Housing Case for Gopro Hero 10 9, Aluminum Video Cage (NEWER VERSION)
amzn.to/3JqFK5e
Rode SC3 3.5mm TRRS to TRS Cable Adaptor for smartLav Microphone amzn.to/3wkX9bY
Rode SmartLav+ Omnidirectional Lavalier Microphone
amzn.to/36sxR0r
GoPro Pro 3.5mm Mic Adapter (Official GoPro Accessory)
amzn.to/3ijchOz
Sandisk 128GB Ultra Micro SDXC Memory Card
amzn.to/3tefuTe
GoPro Suction Cup (Official GoPro Accessory)
amzn.to/30zXnun
Neewer Camera Lens Filter Kit for GoPro
amzn.to/38yZIdE
SHOP LIGHTS, STANDS, HANDHELD, and AUDIO:
Barrina LED Shop Lights (Makes any garage look like a showroom)
amzn.to/2PCRSJl
Neewer 2 Piece LED Video Light and Stand (Great for that extra needed light)
amzn.to/2PAuFaJ
Neewer Camera Tripod Monopod with Rotatable Center
amzn.to/2O5CFjB
Neewer Tripod Pro
amzn.to/41BgSjX
KOBRA-TECH Phone Holder
amzn.to/41ydRks
Aputure Amaran AL-MX LED Video Light (Great light for on-the-go)
amzn.to/3riWke1
Tascam DR-10L Digital Recorder Kit (Easy to operate and clear sound)
amzn.to/2Pw81A9
Apple Lightning to 3.5mm Headphone Jack Adapter (Must have for iphone)
amzn.to/3qmDDEZ
DJI OSMO 3 Combo Pack
amzn.to/3uXzDOQ
DJI OSMO Travel Case (The case that comes supplied with the DJI OSMO 3 does not fit all accessories)
amzn.to/3bjMmUt
#twobrothers #exhaust #milwaukeeeight
Dang that sounds soooo wicked. Def going to put one on mine. Finally someone who gives good detail on their videos.
Absolutely! I’m a big fan of this exhaust now. You already know haha
I gotta hear this pipe in person. So far, i haven't been a fan of 2-1 pipes because they are so raspy. But on your video, it actually seems like the TBR has a deeper tone.
These sound way better in person. I didn’t think I would be a fan of these on a bagger, but my mind has been changed.
Man, I seriously love watching your videos and how detail oriented you are. You should be getting paid to make how to guides thank you.
That’s awesome! Thank you. I definitely appreciate that.
I've had mine on for over 3 years. Love the pipe, and sound. Great video
These are very nice, and sound amazing. Thank You
I’ve had mine for 3-1/2 years… love the pipe but the FP3 I had would not work with that pipe… switched to thundermax and all the headaches went away! Runs and sounds great! And no more lean conditions like the FP3 was doing no matter what tuning was done!
Yeah, unfortunately the FP3 is VH specific. Glad that thundermax is working out 🤘🏽
I have the exact pipe on my 2019 RG I paired it with a Arlen Ness big sucker intake system that fits under the stock cover and bought a dynojet power vision tuner. It's a stock 107 M8 I couldn't believe the difference in HP and Torque!
That’s awesome! It’s the little things that make such a big difference.
Excellent video! Beautiful bike, I have the same : ) I went with the S & S shorty , I like it because you have the option of installing the decibel reducer if you are on a long trip. TBR is also a nice pipe!
Thank You! Great sounding exhaust, and anything is better than stock lol
Great video as always!!those pipes are sick 👌
Thank You! I definitely appreciate it
I think they are the best sounding exhaust , I have a set of black ones on my 17 LowRider S & a set of Stainless Steel ones on my 22 Street Glide ST
These sound amazing! Definitely at the top of my list
The video great and all the instruction are perfect. I"m having problems making the front exhaust flange flush. Do you have any suggestions.
Thank You! I would say with any exhaust system, you want to make sure you tighten everything down evenly. Leave the support brackets for last.
I would say line up everything up before you tighten it down. Also, tighten down everything evenly, and leave the support brackets for last
How’s the ground clearance with the turn down tip? Seems a little low and like it will be the first thing to hit in a turn.
There’s plenty of clearance. Now, I didn’t get a chance to take it down any twisties, but from the looks/angle it should clear hard turns
I had a turnout on my FXLRS. Loved the pipe, it did hit lightly of you took a corner too hard but your pegs would definitely scrape first lol. If you're not regularly scraping your pegs you shouldn't have to worry about it. I'm pretty sure you can just buy a replacement end cap through TBR if you were to damage it and wanted to replace it.
Do you use exhaust sealant that keep the pipes from seizing. When it's time to take the exhaust apart you can easily. Great video. Closeups helps me learn. Thank you!
I do not, I just replace the gaskets. Thank You 🙏🏽 I’m glad this video was helpful.
@RAIDERWORLD I'm prepping to do a stage 2 so the Sharkroad full exhaust that I just installed, I'm going to take off again. You have one of the better videos because of your closeups and step by step information. The stage 1 changed my bike and how it feels. It went from quiet and smooth to very aggressive with more power and volume. It encouraged my to do the stage 2.
@@WDStock_manIt’s always good to hear when these videos are helpful 👊🏽 it’s definitely going to sound amazing
Did your friend want tbr or did you suggest it? It does sound good and looks pretty rad also.
He already had this TBR exhaust, so I helped him out getting them on. I didn’t think I would like them on a bagger, but they definitely look sick and sound great
Hi from El Paso Texas. I'm liking this 2 brother exhaust. Can you let me know about the heat issues from fumes towards the passanger right leg, I'm worried for the ladie ankle.
So this was a costumers bike, but he did mention that the heat was a little unbearable at times.
I put the same pipe on my lowrider st I love it but be very cautious on the install scratches very easy ! I just remove my I’m going to repaint with high heat paint or wrap
Great sound!
Absolutely! I Didn’t think I would be a fan, but I like the way it looks and sounds on the bagger
Can you use the stock O2 sensors with this exhaust?
Absolutely!
did you lose ground clearance when leaning into tight turns?
I took it on a few turns, and everything was good on clearance. It also depends wether you have lowered suspension as well.
Was there no tune specifically for two brothers in the fp4? I have an fp3 that has TBR 2-1 comp , what made you choose the v&h map?
There was no tune specific for TBR. It was all specific to V&H
Do you really have to tune it? Im going to install mine but dont have a tuner yet and curious if its necessary
Not always. Just allows you to have a better air to fuel ratio.
I’ve been seeing a ton of bad reviews for that tuner. I was thinking of going with the creaming eagle one. What do you recommend?
I don’t run this tuner myself, but nothing beats an actual dyno tune.
How is the bike with the fp4 propipe map working for the pipes on your friends bike?
We ended up changing it to (Vance and Hines 2-1 HI Output exhaust) right before I did the sound check.
Was there an issue with propipe map? I got a 2018 street glide with the same pipe.
No issues, the HI-Output just has a lot more similarities to the TBR
Hey thanks for the info. I like the pipe and great video. I'll run it the propipe map to see how it does.
How does this pipe compare with the Bassani Road Rage?
I haven’t compared them side by side, so I couldn’t really say.
How much power and torque loss compared to a full length 2 into 1 Like a Thunderheader or V@H Propipe..?
Unfortunately I did not run a Dyno on this bike, but most often than not, a stock exhaust has a dummy pipe. So in theory, it’s still a 2-1 exhaust. I don’t believe you have a loss in power, or a big enough gain that you will notice
@@RAIDERWORLDI know with my V@H long length 2 into 1 Propipe gives me Max Torque...And thats why people run them is for performance not the look or sound...The best look and sound is a set of true duals and no baffles...But it robs you of performance...
Dude where did you get that apparatus for the bags?
I honestly couldn’t say lol. This was a customers bike
@@RAIDERWORLD Can you find out?
Do they have a removable baffle?
I don’t believe so
Ahh the ol HOA haters 😂 great vid as always
Haha Right! Let’em hate
Is manufacturer warranty voided
Not if your just adding the pipes. If you add a tuner, it will void some of the warranty
Great 👍..Sir 🤗
Thank You!
Replacing my exhaust, just a few questions. Original owner of the bike swapped out the exhaust, it doesn't have the exhaust retaining ring. Do I need to buy that because my new exhaust (D&D Billet) doesn't have them either but did come with flanges. Also, my O2 sensors are black, do those need to be replaced as well?
The retaining rings just keep the flanges from sliding off. Technically you do not need them. I would check your service manual on when to replace your o2 sensors, but usually you can just clean them
Great video, Thx
Thank You! I definitely appreciate it
Stock M8 114?
Yes, stock 114
Next, a Cam
If he wants one lol.
Who's bike???
Friend of Mine
How many bikes do you own?!?!? 😂✌🏾😎🇺🇸
Haha! Three now. I do work on bikes, so occasionally I will film someone else’s bike.
Have a bit of British in ya? Orientate vs orient. LOL
My English is not so good haha
Those pipes are way too loud that's why nobody uses them.😂😂😂😂😂😂
Haha! 😂
You don't know what you're talking about. Best bang for your buck
Too loud my ass, they sound like mouse farts. 2 into 1 is such garbage
Your intro look like a girly fashion show. Just show whether it works or not, how it sounds. Not how pretty it looks in a pink skirt
Cool! Take the time to make a video and show me how it’s done 👍🏽
Are they the same pipes for the lowrider S
They are similar, but the headers are shaped differently