Man your videos are soo good, you can't imagine how much you are helping people with them and also encouraging many to come to Blender and do some Archiviz. Well done!
TIP: At 4:11, the menu you click, inside "UNITS", you can select Unit Scale = 1m, so if the room is 10x10m, you can simply make it 10x10 squares on the grid, since the size is notated on the blueprint., so you wont have to guess or compare or use another reference.
@@heisenberg3206 Pause the video in the 4:11 timestamp I mentioned. Look at the bar to the right below: Scene, UNITS, gravity, etc. You just expand the units menu and its there.
One could scale the image to match the estimated door opening, but if dimensions are available they'd have to be preferable. If it's a problem, imperial measurements can be readily converted to SI units. Take the longest one, (21.5 feet), convert to mm, then scale to that. Your method is very impressive and efficient. I like it better than manually tracing an image. Thanks.
Hi, thank you for sharing. I am beginner and trying to follow through. At time 5:05 where you pull the wall up, i got lost from there. Can share more.specific steps i should be doing?
Hi mate and glad you liked it! After 5:05 nothing much left we already hit E to extrude the walls on the Z axis, and we repeated the same thing with the letters, though they're not that important.
Can a added counter in my drawing be removed from the full height model and then put back in or can I just adjust the height of that counter later please?
I think the result will depend on the mode you choose to export the SVG, though I'm as I said a noob in Inkscape so you might need to look more on this, for me I rather fix it with blender so getting the SVG with all components is good for me.
If you increase the Black Levels, say in Gimp, you go to Colors/Levels, and move the arrow on the Output levels to the left, and make it as black as possible, this helps a lot. Then export as a .png. This needs to be done before making it an .svg file in Inkscape. It doesn't completely eliminate the vertex mess, but helps a ton!
If you mean in blender you can do whatever you want with it. Separate any part you want or assign any area with different materials. All options are available. With Inkscape I would think you either do it based on color or line thickness or any other method it has to recognize the image.
Glad you liked it. Watch this Video Interior Floor Planning : th-cam.com/video/4TCTAuv15Gs/w-d-xo.html You can also see This it might help : th-cam.com/video/ovsZp_wtOYg/w-d-xo.html You can Visit the channel to see multiple videos around this topic @architecturetopics
Do you mean after importing it to blender? Select it from the layers and hit Num-bad . to zoom at selection, then hit S to scale. If not just give us the time where you have a problem.
cleaning is a mess comparing to sketchup with of blender...it surprises me if blender is going to generate a 3d mode from 2d views (top & side) of svg of the same object but here its not the case despite its free.
Man your videos are soo good, you can't imagine how much you are helping people with them and also encouraging many to come to Blender and do some Archiviz. Well done!
Really appreciate it mate! Thanks
TIP: At 4:11, the menu you click, inside "UNITS", you can select Unit Scale = 1m, so if the room is 10x10m, you can simply make it 10x10 squares on the grid, since the size is notated on the blueprint., so you wont have to guess or compare or use another reference.
Thx for the info mate! really appreciate it
@@architecturetopics ty for the video, it was a nice idea well explained =)
i can't find units all i see is transform, scale, location, rotation and dimensions
@@heisenberg3206 Pause the video in the 4:11 timestamp I mentioned. Look at the bar to the right below: Scene, UNITS, gravity, etc. You just expand the units menu and its there.
AWESOME!!!! .svg files until right now were part of the problem. Now they are part of the solution! Thank you VERY much Architecture Topics!!!!!
Your channel is criminally underrated
Thanks buddy!!
Genius trick! It sure beats importing, scaling then tracing a JPEG.
This is phenomenal! first time hearing about this InkScape Thanks for sharing.
Thanks mate! glad you like it.
One could scale the image to match the estimated door opening, but if dimensions are available they'd have to be preferable. If it's a problem, imperial measurements can be readily converted to SI units. Take the longest one, (21.5 feet), convert to mm, then scale to that.
Your method is very impressive and efficient. I like it better than manually tracing an image.
Thanks.
This is really nice!! Such a quick option 😍😍
Converting to SVG was a genius idea! Thanks so much !!
Thanks, Glad it Help.
Thanks!
Thanks mate! Really appreciate the Support🖤
You are truly such a helpful person that he explains a lot in every video. Thank you very much indeed! 🥰
Happy to help!
Damnnnn!!! You are outstanding, amazing, unbelievable and what not 😳take a bow man!!!! I’m glad I found your channel.
Thanks! Glad it help
Great tips on tracing in Inkscape! The setup can be also used for decals.
Uncle roger Lol good choice good choice Nice Video by the way.
Lol YES
Good tutorial but would have been great if you would have explained what you were doing during the re-scaling section.
Can you make a video about how you setup the scale of the svg file?
Excellent. Thanks for sharing.
done and shown beautifully. but in between when you shifted the mouse too fast, I kind of got confused, but pretty good overall.
Awesome video man, this can be great time saver
this is pretty good..I have to practice getting the scale more accurate...it is a faster way to do it..just another technique
Hi, thank you for sharing. I am beginner and trying to follow through. At time 5:05 where you pull the wall up, i got lost from there. Can share more.specific steps i should be doing?
Hi mate and glad you liked it! After 5:05 nothing much left we already hit E to extrude the walls on the Z axis, and we repeated the same thing with the letters, though they're not that important.
@architecturetopics thank you very much. Tomorrow I go try again. Many Thanks. 😉
Awesome trick, you just sped up my workflow
Thank You! What about doors and windows?
With blender Archimesh shouldn't take time to set doors and windows.
watch this th-cam.com/video/Q4rbqUbhYXY/w-d-xo.htmlsi=Jov5_-y8iilSvORY
what if i told you u can do this entirely in blender using Trace Images to Grease Pencil
How?
Thanks for the video!!! This will save me, hours of work 🙂
Thanks for this video! This is a great technique.
Glad it help thanks.
Very helpful. Thanks
Glad it was helpful!
Interesting. And I'm impressed with its ease too.
Awesome brother your work is simply mummah 😘😘😘loved it
Thanks mate!
I liked the work very much and it is what I am looking for
It shortens the construction and requires effort from you to modify
Thxxx.,,🤩
Can a added counter in my drawing be removed from the full height model and then put back in or can I just adjust the height of that counter later please?
Clever way! Thx!
Glad it help mate!
I wonder if you can fix svg file in inkscape, so not much of vertex mess in blender
I think the result will depend on the mode you choose to export the SVG, though I'm as I said a noob in Inkscape so you might need to look more on this, for me I rather fix it with blender so getting the SVG with all components is good for me.
@@architecturetopics Thanks for the thoughtful reply.
If you increase the Black Levels, say in Gimp, you go to Colors/Levels, and move the arrow on the Output levels to the left, and make it as black as possible, this helps a lot. Then export as a .png. This needs to be done before making it an .svg file in Inkscape. It doesn't completely eliminate the vertex mess, but helps a ton!
Is that wall tickness correct? How if needed to change tickness after things done?
mate, done by 2 free software, god bless developer
I am going to try this technique a few more times and then I will try tracing images to grease pencil
this video is excellent. thank you.
Love your work 😍😍
Wow, very useful! Thank you
💙
Very cool!
amazing😍😍😍😍😍😍😍😍
how to add more details : doors n windows n texture... great vid
Is it all one wall or can we select it individually for materials?
If you mean in blender you can do whatever you want with it. Separate any part you want or assign any area with different materials. All options are available. With Inkscape I would think you either do it based on color or line thickness or any other method it has to recognize the image.
very creative!
wonderful. thank you.
Good one, thanks
thanks for sharing !
😂😂😂 another good one 👍🏆
Love your video. Is it possible for you to model an entire house please
Glad you liked it. Watch this Video Interior Floor Planning :
th-cam.com/video/4TCTAuv15Gs/w-d-xo.html
You can also see This it might help :
th-cam.com/video/ovsZp_wtOYg/w-d-xo.html
You can Visit the channel to see multiple videos around this topic @architecturetopics
Wawww What is the name of the screen capture app?
Camtasia Rec
I try to do the trace bitmap but the lines get bluur for some reason
super cool
Good One
Incrível!!
Awesome
great video
5:03 hit Ctrl P is that right ?
CTRL P in edit mode will separate selection from main mesh, the time stamp you have here is on extrude E.
Super
may the good Lord bless you beyond your expectation i am grateful
thank you
💙
HOW DID YOU MADE THE MAP BIGGER, I'M STUCK AT THAT POINT. CAN ANYBODY ELSE HELP???????????????
Do you mean after importing it to blender?
Select it from the layers and hit Num-bad . to zoom at selection, then hit S to scale.
If not just give us the time where you have a problem.
@@architecturetopics Ok let me try this
Hi, what if it is already a PDF?
Great
keren
That’s smart
I use this method to turn Logos into 3d models
can somebody help me separate the walls from everything else
Hit Tab for Edit mode, Select the walls, press P, choose Separate.
Suppppppppppper !!!!!!
cleaning is a mess comparing to sketchup with of blender...it surprises me if blender is going to generate a 3d mode from 2d views (top & side) of svg of the same object but here its not the case despite its free.
tanks tanks tanks
Glad you like it mate!
fix the AI voice for next videos please
Genius! Feels like cheating! haha
👍👍👍🤝🤝🤝
Thanks 💙
But no architect will use this
I hate to say it but I stopped watching after hearing the voice.
Awesome video man, this can be great time saver