⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: th-cam.com/users/AutoRepairGuys ⛐ Our Donation Link: gf.me/u/y59hvn
I just did this repair today based off of this video, when you have the tools this job is a 4/10. When you’re pulling off the hoses don’t be afraid to just break the old clips since you’re new part has new clips. And you do not need to remove intake tube or throttle body. Took about an hour. I am the warranty
I want to thank you for the very helpful DIY's you are making. Is it possible for you to record how to replace the torque sensor in the steering rack and how to calibrate the new part?
@@miguelpina6890 if i remember correctly u just need to get it out its support brace theres enough room to wiggle it out ' dont forget to reset adaptations after new install
you need to remove all these parts just to get to the purge valve ? I wanted to do a smoke test from purge valve to troubleshoot EVAP issue on F30 so all of this has to be removed?
Im stuck man I hope you can help. I have a 2011 535i I have permanent code P149D with no CEL but code is there so I replaced the whole shutoff valve and have done several drive cycles and still no luck. Any suggestions?
To say that this engine is absolute garbage is an understatement. Most of the “common” failures like the timing chain guide for instance are simply unacceptable, especially coming from BMW. 🤮
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: th-cam.com/users/AutoRepairGuys
⛐ Our Donation Link: gf.me/u/y59hvn
I just did this repair today based off of this video, when you have the tools this job is a 4/10. When you’re pulling off the hoses don’t be afraid to just break the old clips since you’re new part has new clips. And you do not need to remove intake tube or throttle body. Took about an hour. I am the warranty
i love this guy and the videos, thank you for all the help.
I want to thank you for the very helpful DIY's you are making. Is it possible for you to record how to replace the torque sensor in the steering rack and how to calibrate the new part?
u dont need to take out brace or chargepipe just did it today
How exactly did you do it man was it easy? I’m aware this was over a year ago lol
@@miguelpina6890 if i remember correctly u just need to get it out its support brace theres enough room to wiggle it out '
dont forget to reset adaptations after new install
@@vpilegaciii7584how do you reset it?
How do you reset the adaptation
you need to remove all these parts just to get to the purge valve ? I wanted to do a smoke test from purge valve to troubleshoot EVAP issue on F30 so all of this has to be removed?
My purge valve doesn't have that extra hose going to the front.. 320i 2013.. I'm lost..
You dont need to take out a single thing lol. There is plenty of room to get it out. I changed it in like 20 minutes
Im stuck man I hope you can help. I have a 2011 535i I have permanent code P149D with no CEL but code is there so I replaced the whole shutoff valve and have done several drive cycles and still no luck. Any suggestions?
Bro my engine is not taken alert like that
Whera are you from ?
To say that this engine is absolute garbage is an understatement. Most of the “common” failures like the timing chain guide for instance are simply unacceptable, especially coming from BMW. 🤮
Damn, can't even understand what his saying.