It's a cool idea, but the "IMI TRV Insert Removal Tool" can only be used on a TRV valve body that has an insert with a 19mm hexagonal nut/shoulder, such as IMI, Altecnic, and Honeywell Valencia. Would be good if they could make adapters so it works with other valves too. Probably more beneficial to commercial workers who know which type of valves are used in the buildings they manage.
I see that tool on a Honeywell training course back in 2008. I remember them being expensive at the time. I think it only did Honeywell valves and one other brand. Possibly Drayton. Other than that it’s a drain down or snatch job.
Здравейте,колеги тука в България сменяме термовентили от 2000 година и тази технология се използва отдавна.Но е само за определено марки.Реално тези вентили са много добри и не дават дефекти само пп някога ако не се ползват редовно блокира иглата.След издърпване нагоре отново тръгва.Поздрави.
It's a Herz trv head removal tool. I work in a hospital and was shown this a while ago. They specific to the make of trv. It's not a one tool does everything job.
Nice one , but i dont think it would fit cheaper domestic valves as it looks manufacturer specific for the expensive commercial valves..... Cheers mate.....
Not sure that special tool is so necessary as this guy took out a TRV core without draining a pressurised system and used no special tools th-cam.com/video/h8dDmn-bzFs/w-d-xo.html Not sure where to even buy TRV cores so this must be a specialist tool for specific TRV installations not run of the mill domestic installations.
Okay if you have the extractor, shut of tool. The angle of view would have been better, from the right, surely, because too much obscurity ... Especially from a first timer ...
to many different valve sizes out their, imperial and metric, plus more money in drain down when your on hourly rate. fine if valves are all honeywell which there not. If it doesnt work your stuffed
if you have a site with a hundred rads all with the same type of trv it's worth forking out for the tool for that size and leaving it on site with a few spare cores.
![[ไฮไลต์] "บิว" ภูริพล บุญสอน วิ่ง 100m ชาย รอบคัดเลือก | โอลิมปิก 2024](http://i.ytimg.com/vi/3kUSMfgtQ5s/mqdefault.jpg)
What kind of sorcery is this, He’s a witch I tell you a witch 🤣🤣
The dark side is strong in me...🤣
Seen that before but forgotten what's it's called. I now want one 😂
Thanks Allen - I'm onto my plumber now to ask if he has such a tool - love your videos :-)
It's a cool idea, but the "IMI TRV Insert Removal Tool" can only be used on a TRV valve body that has an insert with a 19mm hexagonal nut/shoulder, such as IMI, Altecnic, and Honeywell Valencia. Would be good if they could make adapters so it works with other valves too.
Probably more beneficial to commercial workers who know which type of valves are used in the buildings they manage.
Good one Allen
Yep, more info needed.
Hi Allen good to see you very nice
Very nice 👍🏼
Seen them before. Would be nice if adaptors were available for different makes of trv. Thanks again, for posting.
Thanks for watching!
Great tool 🔧 thanks for uploading Allen. What's the tools kit name .... 🤔
Is that a Rolex😂
I wish.... lol...🤣
I see that tool on a Honeywell training course back in 2008. I remember them being expensive at the time. I think it only did Honeywell valves and one other brand. Possibly Drayton. Other than that it’s a drain down or snatch job.
Здравейте,колеги тука в България сменяме термовентили от 2000 година и тази технология се използва отдавна.Но е само за определено марки.Реално тези вентили са много добри и не дават дефекти само пп някога ако не се ползват редовно блокира иглата.След издърпване нагоре отново тръгва.Поздрави.
Shame they dont do all valve types. If it did, it would be an absolute game changer. Cracking bit of kit though
Hi Allen good to see you o
Very good
it's well and good if you have the extractor tools to do the job ??
that's a good if you are a plumber so you can use it more often not for a diyer enjoyed the video.
Magic maybe you could do a video on how that gadget works.👍
What happened to the water in the unit when you removed it? Surly the cavity of the device is full of water?
Need to find out where you get one
It's a Herz trv head removal tool. I work in a hospital and was shown this a while ago. They specific to the make of trv. It's not a one tool does everything job.
Link to this please
Nice one , but i dont think it would fit cheaper domestic valves as it looks manufacturer specific for the expensive commercial valves.....
Cheers mate.....
Interesting. Surely not all makes and models are interchangeable, or are they?
What is that tool called?
Hmmmm (note to self - home DIY anorak) must fit shutoff valves to all radiator tails 🤔
Thanks very much for your comment, please consider subscribing to support the channel 🙂
@@AllenHart999 Already Subbed Allen, long time ago; fantastic channel - cheers 👍
👍🤓👍
Damn it..... now I’m spending more money on tools 😂😂😂
20 odd years doing this and I’ve never seen that
Good bit of kit but not for us more mortals 👍
Didn't learn anything from that tbh
Not sure that special tool is so necessary as this guy took out a TRV core without draining a pressurised system and used no special tools th-cam.com/video/h8dDmn-bzFs/w-d-xo.html
Not sure where to even buy TRV cores so this must be a specialist tool for specific TRV installations not run of the mill domestic installations.
In other video they show that you can only get the cartridge fro. Another trv: th-cam.com/video/_qfXIaDsKnk/w-d-xo.html
Definitely no good for the DIYr like me. Most of us don't have tools like that.
I think the products made by a company called Imi
theintergasshop.co.uk/imi-hydronic-engineering/1201-imi-hydronic-trv-insert-removal-tool-9721-00000-4024052298914.html?fbclid=IwAR0VRnpj2mUw2_jiLRs8cEiEna3Cw2I0_41NAMrDxKx7S2AbzVEihemKnkA
Didn’t understand anything
Okay if you have the extractor, shut of tool. The angle of view would have been better, from the right, surely, because too much obscurity ... Especially from a first timer ...
Imi and honeywell sell em
IMI Insert removal servicing tool 9721-00.000
I think this is it or similar...
imi insert removal tool about £100
to many different valve sizes out their, imperial and metric, plus more money in drain down when your on hourly rate. fine if valves are all honeywell which there not. If it doesnt work your stuffed
if you have a site with a hundred rads all with the same type of trv it's worth forking out for the tool for that size and leaving it on site with a few spare cores.
@@cliveramsbotty6077 agreed
but still plenty of money in drain down or bung,
Sorry to say ,poor camera angle, couldn't see very well what you were doing! obviously a special gadget and not for a DIY amateurs.