I consider myself a competent diy'er. My uncle who was a plumber taught me much and so has my mate in the trade. I used Marks ideas here and changed a TRV and lockshield valve no problems AND removed the old olive as suggested. These things are doable with the right tools, confidence and aptitude, I don't like the insinuation by many 'plumbers' that it shouldn't be touched or attempted by anyone other than them. It's just their money they are thinking of. As long as you are not a hamfisted halfwit and take your time and have the correct tools, you can do it. I've seen many tradespeople do piss poor jobs at £100 per hour, I personally don't trust them,the good ones are too few. Thanks Mark for taking the time to explain it thoroughly
You are absolutely correct. I had experienced both sides of this with a boiler valve. It seemed daunting even to me as an experienced diy'er. One maintenance plumber said "don't do it yourself", I immediately hated him. The next guy I asked about the issue and he told me exactly how to fix it myself and source the correct part. I was astounded by his openness and kindness and most of all his unguarded manner. These are rare people. My people. I fixed the job perfectly fine. Peoples before money/company does more good than you can imagine.
Thank you so much for sharing this! It gave me the confidence to give it a go myself. A few hours of prep and a few more of work and I've changed 8 valves fixing the mistake of a tradesperson who put one-way valves on the wrong side of 4 radiators (they also put jointing compound on the threads). No leaks first time and I couldn't be happier!
Really well made and trustworthy professional information video. I'd already done plumbing work like this (and more) as a homeowner. Use this guys experience, it's invaluable. The nod to squash professional rebuttals about losing work is also spot on. I always champion this style and type of content.
Thanks for the video. I had to change two valves after replacing an old downstairs radiator which is on a system with a combi boiler and my plumbing has never gone right before. This worked like a charm. Even to the extent that after allowing water to flow out of the existing valves, when i took the valve off no water came out at all. I had turned the boiler off (as the video advises) and all the other downstairs radiators off as well. The lack of water flowing from the pipes gave me the opportunity to remove the old olives and replace the nut Marvellous!
This is an absolutely brilliant video! Super informative, clear and helpful. Thanks for taking the time to create and post (both) of these videos. I'm an avid DIY'er and love to have a go at things myself first, so this sort of video is exactly what TH-cam was created for IMO. Thanks!
Thanks Mark, This is the second video on this topic I've watched and yours is very clear on the steps and far more helpful as you are not confusing the story by trying to address Combi and gravity in the same video. I have found that the TRV is on the wrong end of the radiator and it has started making a right old racket! I will be trying it out on Saturday as my wife is away for the weekend giving me the chance to clear up if it goes bad!
Thankyou for this video, I’ve always struggled with TRV’s and fitting radiators. I just followed your guide and managed to add two TRV’s to my CH in 2 hours, I did it without draining the system too which I didn’t think was possible.
Re tapered joint. I bought a shank of hemp 40 years ago which I’m still using. Never had a a leak at that joint. ( plenty elsewhere) PTFE should be regarded as a lubricant. It has no bulking out property. Thanks for the video.
Mark, you are brilliant. So generous with your tips and advice. I am about to embark upon changing a couple of TRVs and thought I was going to have to drain the entire system. This is brilliant advice. I've subscribed to your channel, so looking forward to more from you. Thank you
Thanks! Your video gave me the confidence to replace a faulty TRV that wouldn’t shut off - the added bonus of knowing what problems might arise helped me be prepared but luckily it was a straight swap
Thanks very much for this video. I wouldn't have called a plumber for something simple like this as I'm comfortable with DIY, but I just needed tips for the details which I could have searched and pieced together for ages but this video had everything in one place. Will be buying you a pint via the toolbox fund. Cheers.
Excellent video. Thank you for sharing your experience and explaining so clearly. Lots of valuable practical tips that will make a huge difference to any keen DIYer.
Ive been a plumbing and heating engineer for thirty years and I've earned a lot of money putting right and getting out of trouble people that have attempted DIY, things do seem easy until things go wrong, that's when i get a call, keep your videos coming sir, plenty more work for me!🤣👌🏻👍🏻
Damn you, algorithm! Why didn’t you show me this video *yesterday*? Excellent details about locking upstairs radiators and supporting valves. Thank you.
Great video Mark. Your approach worked perfectly for me - thank you. One thing some people might need to consider is where an adapter is used in a TRV (instead of a normal olive) to step down from 15mm to 10mm.
Thank you for a very interesting and informative video Mark. During the course of my life I've changed many radiator valves. I have always drained the system. This video has shown me something I would never have thought of. The use of PTFE tape on the threads was also a surprise. I knew the olive sealed the valve but I have always taped the thread when reconnecting the valve. I am 71 years old and still learning. Thank you.
I successfully changed out 3 radiator valves for thermostatic valves based on your earlier video. Excellent videos! Thank you for producing them with brilliant detail and confidence inspiring tone!
Huge thank you, really gave my the ability and confidence to change the valve on my radiator. Saved me alot of money on a call out and a plumber. Thanks again, really great video :)
Really excellent videos, changed my first TRV today having run around town finding some rubber bungs (Toolstation) to isolate my loft tank and depressurise the system. Following the process Mark described, a piece of cake, done in under an hour. Now have 5 more to do, total cost inc valves to complete everything just over £100, absolute bargain compared with a plumber (if you can find one). Thanks Mark, really helpful.
@@frenchfrench4514 The main reason I've learned to do quite a lot of these basic jobs myself is that all the good tradesmen are very busy and I'd have to wait months. Even if it's a job that will take me a whole day (find out how to do it, visit the shops to find the bits I need and then spend hours methodically working through it, it's probably a one hour job for a professional and I find they're often not interested - they'd much rather take on bigger jobs so that they spend less time doing quotes, driving around from job to job and billing 5 different people. No complaints, they've got to make a living, but I'm not necessarily taking work away from anyone.
@@frenchfrench4514 The truth is - if you costed the homeowners time on a similar basis to a plumber. The time spent trying to find a plumber or getting one to respond and turn up, the homeowner taking time off work to be at the property then it is no wonder that for small jobs it is expedient to DIY (if you have the house). To be blunt - plumbers do not want this sort of work anyway - there are bigger fish to fry.
When you use an adjustable wrench, you should push into the sliding jaw. That way you are supporting/compressing the jaws rather than trying to pull them apart. You were tightening/loosening by pulling away from the slider etc. One of the first things i was taught in my early plumbing days.... Still a good video!
Great video a bit long winded but I would rather that than rush a job especially anything to do with central heating. Keep up the good work that you’re doing I am a DIY and cannot afford to keep calling out engineers to do jobs like this as I am also an OAP and have lots of time on my hands, so I would always have a go at anything first myself after watching a video just like thiis. Keep up the good work and thank you.
9:08 - I can't remember where/why I was told to use PTFE on the threads, and have often wondered what's the point for exactly the reasons you gave. I just kept doing it anyway because that's what I've always done - glad you've put my mind at ease and I can now stop doing it! I guess it's the people you learn from knowing it's essential in some cases (e.g, outside taps) and getting in to the habit of doing it on everything without thinking about why.
PTFE on threads is not for sealing, teflon is the most lubricating substance there is. You put it on threads so you can tighten the nut up more past the point friction would allow you too, therfore being able to tighten the joint further and easier which in turn compresses the olive more and creates a better seal. No jointing compound needed then. This guy may have been in the trade a long time but this is the reason plumbers and mechanical engineers use ptfe on threads, plus i've never used ptfe tape to seal anything
Wow, what a comprehensive demonstration! I have done DIY for years and changed rads etc. But never used this method. Didn't know it was ok to use the same olive on the pipe and I have always used PTFE tape on the nut threads! So definitely learned something today. Thanks for this, top job Mark.
Watching this video exactly because we can't afford to get a man out for 1 radiator. Not worth the time of anyone involved. Ours is actually a towel rail radiator so things are a bit different, but there's a lot to carry over from this vid. Top info, thanks!
Thanks for the video Mark.. I've fitted plenty of valves but felt I better have a refresher and good job I did,, there was a couple of things lets say slipped my mind,ha ,,So thanks again and great video
Brilliant clip much clear & detailed video so other on here are trash with no detail thank you for this is what I’ve been looking for just need some jointing compound 😊
Fantastic demonstration, simplified for any level DIYer, I have a 10mm pipe that is partially blocked with solder inside I cannot change it easily as it is cemented in the floor, any hints on how I can remove the solder please???
Great video, thanks. I had two valves to replace, one upstairs and one downstairs. I managed to do both following your advice, and I'm an absolute beginner.
I would add: to minimise draining, I would go round the whole house & shut off all rads at both ends first. Most of the water (and pressure) will stay in the rads, and its a good opportunity to check / lubricate all valves), plug off the top tank (or depressurise a sealed combi system); Also, I made my own tapered bungs to the size I want using a thin cardboard cone & filling it with silicone mastic - leave for a week till fully cured, then soak in water before rubbing off the cardboard. Always add 1L of corrosion inhibitor if you can, it acts as a lubricant apart from anything else. Nice vid, thanks.
I have done a radiator as a DIY. I shut off all radiators in the house at both ends. Then for the radiator I wanted to remove, I drained it at the radiator after scooping out as much loft tank water with a jug and shut off the mains fill with a towel to stop it filling the loft thank. Then I painted the radiator and put a TRV on. I did that to the loft tank to clean with a cloth and remove the scum water. There is a loft tank in my home. I then put inhibitor back in via the cleaning magnetic filter and refilled the system from the mains water in the loft tank. I also shut off the stop cock for peace of mind. Clean loft tank AND a new painted radiator and inhibitor.
Mark, great video, just done my valves without a hitch and very long title bleeding afterwards...just a thought, found an unused mastic spigot a perfect bung for the rad when the valve is pulled away, cut it with a 10mm tail once it was in and snug.....couldn't have done any of the rest of it without your help tho. Many thanks
Great video. Exactly how I change my valves…👍 (keen DIY’er.) saves money on replacing inhibiter and in my case underfloor heating biocide which seems to be really expensive….
Thanks for great videos. I've now replaced 2 rads, including changing the 4 valves/tails, all new nuts and olives. Did buy an olive puller as too scared to try hacksaw method! Do any of your videos cover new bsp valve into heated towel rail - unsure about whether/where to use ptfe tape/jointing compound.
Great tutorial! Couple of suggestions, releasing the system pressure from the air release is time consuming and depending on the type of air release can be very difficult to catch the water. Much quicker & cleaner to drain the pressure from the boiler drain point. While you are there, if the boiler is above the rad you are working on, it's helpful to either close the boiler isolation valves or just close the boilers auto air vent. This prevents air ingress and better holds the water inside the system while your working. Very nice to see your use of jointing compound on the olive faces, many 'professional' plumbers use no jointing medium at all! 👍👍👍
The last thing you want to be touching are boiler isolation valves because they are never exercised the minute you shut them then open them the rubber o-ring inside splits and they start weeping from the spindles
Thank you. I found this video really useful. As a keen DIYer, I have always drained down the whole system when changing valves. Your method is so much simpler, saves time, the risk of unwanted air locks (which I've had) and of course water. Q- Is it better to put the TRV on the flow side of the radiator?
Good to watch Mark, thank you. A- I have just replaced the 10 TRVs on my o-l-d system with Evohome wireless controlled valves and this showed me the difference in feeding from Flow and Return sides of the radiator. Feeding from the Return side causes the room temp to vary more than if the radiator is fed from the Flow side. I have not worked out why, possibly compensation devices on the new valve head. I have noticed that a few of the old valve heads have started to leak, they do operate more than a normal TRV. Guess what I will be doing when the weather warms up, if I don't follow your video first!
Thanks for a very informative video. Can you please clarify the purpose of the jointing compound / ptfe tape. I always believed that it's sole purpose was to help the mating threads slip, enabling a tighter joint with less effort and preventing galling. In the video you state that you only use it on the ends of the olive to help sealing and not on the threads.
Great vid and will help a lot of people. Just one thing i have to say only coz i found it funny. You said you rolled the carpet back. I dont think there was any carpet in the room coz there are no grippers on the edges. Also in one clip there is a unit on the floor with no carpet under it or any grippers there. 🥴
Always useful to put full bore valves on the main supplies so that creating air locks thus no drain down of system is easier. Good also once or twice a year to test such valves as they can corrode and fail over time. Great video.
@@JohnnyFontane528 YES! On each floor I have a couple of valves on the flow and return of the heating circuit which enables me to isolate that floor (or zone) whilst I carry out the work. In much the same way, I also always install a 40mm waste pipe which is connected to the waste water system when I install a header tank or hot water/heat sore, it is all about making future maintenance easier, planning in advance and enabling drain downs or value replacements so much easier.
Another helpful video, I used a freeze pack to change a valve, which turned into a right mess as I needed to change the olive at the same time,hence the ice suddenly popped out and I had a nice waterfall. But watching this I can see the mistake I made with the pressure.
I assume the old type one-direction thermostatic valves can be fitted to EITHER side of A radiator, and I also assume the TRV can lie horizontally or vertically, so long as the embossed arrow is in the direction of water flow through the radiator.
Hi. So helpfull Thank You. I guess the pipes I have that go into radiators are very thin, they are around 5mm diamter. I am worried I will kink the pipe accidentally. Do you think it is still safe to attempt to drain the system on lockshield valve (as I do not have drain valve in a system)? My goal is to drain the system and refill it with cleanser to get rid of cold at the bottom of radiators.
Brilliant stuff. Was just writing, how do you pull the pipe out so far to get the tap off, as ours are held by the floorboards. Then you answered it like you're psychic. Lol.
I like Your video a lot, but have one key observation. The thermostat itself should NEVER be above heating pipe. In this case it should be mounted horizontally not vertically. Vertically mounted themostat is heated with warm pipe below and "thinks" there is warmer in the room than it really is. This disrupts its regulatory capacity.
@@danimayb Principles of Physics.Chapter on heat convection, elementary school. Warm air heated by a pipe rises upward. It tricks the thermostat into thinking the room is already warm and closes the heater too early. The radiator will somehow work, but incorrectly.
Liked and watched till the end! Helped a lot and gave some great tips, all changed and functioning again. Only issue I had was water coming back up the exit pipe. Didn't know how to stop this so used your kitchen roll trick👍
I am grateful for this information. I'm a DIYer who will probably attempt this repair myself, although I would rather not. I called several professionals first but here in the US, I am facing a 16 week wait. I've got a towel wrapped around the leaking valve and I have a barrier of chicken wire wrapped around that to keep the kitten and the puppy from trying to lap up the dripping water, which is green with anti-freeze...not healthy for the little animals!
great vid! can you confirm please - I have a rad with the TRV on the return pipe. Is the pipe that heats up first the flow and should the TRV be connected to the flow as best practice? (combi system)
i tend to find so many times that the new fitting wont fit the position of the old olive and its so much fun when it doesnt,don t panic Mr Mannering ,then its a quick freeze and off with the old olive on with the new ptfe and refit .
if i wanted to replace the radiator and valves at the same time, can i follow the same steps of bleeding the pressure closing the valves and then remove the radiator with valves attached keeping the water inside the rad?
The pipe on which my TRV is fitted is fixed in concrete so it looks like I’m going to have to lift the radiator as you demonstrated in your video, I know you said if the radiator was short it might move the valve /pipe work at the other end as you lift, my rad is about 2m in length, won’t that be the same? Pipe work on the valve at the other end of the rad is also into the concrete floor.
@MarkBallardLTD hi mark, firstly thank you so much for your content which has really helped a lot. Id be ever so grateful for your advice?, A year ago i removed 2 radiators downstairs before plastering and decorating. It took me a while to get around to it but shortly after reinstaling they had leaks at the bottom. Im getting new ones soon, and wondering about inhibitor. At some point in next 6 months ill be getting around to replacing all the other old rads. Am i better waiting until ive replaced all of them, then put inhibitor in, or would you advice to add it straight away when installing the 2 downstairs. Reason i ask is until having new boiler a few years ago i never touched the back boiler system and all are old radiators. Water was black when removing first time, but clear second time. If ive sludge in upstairs rads will adding inhibitor break it down and move it to the rest of system (and new rads) if so could i be best leaving it until all rads are replaced? Or should i do belts and braces and add inhibitor, let it break sludge down, then drain system and reapply inhibitor in a few weeks? In regards so inhibitor is x100 fine for any boiler or does it need to be certain types for different systems and or same as what initially when into the sytem. Keep up the good work mark, im already thankful for your channel and massive gratitude for any support you can offer. Kind regards Suzi x
Sharing your years of knowledge to help people out who can't afford an engineer is very generous. Thank You.
I consider myself a competent diy'er. My uncle who was a plumber taught me much and so has my mate in the trade.
I used Marks ideas here and changed a TRV and lockshield valve no problems AND removed the old olive as suggested.
These things are doable with the right tools, confidence and aptitude, I don't like the insinuation by many 'plumbers' that it shouldn't be touched or attempted by anyone other than them. It's just their money they are thinking of. As long as you are not a hamfisted halfwit and take your time and have the correct tools, you can do it.
I've seen many tradespeople do piss poor jobs at £100 per hour, I personally don't trust them,the good ones are too few.
Thanks Mark for taking the time to explain it thoroughly
You are absolutely correct.
I had experienced both sides of this with a boiler valve. It seemed daunting even to me as an experienced diy'er. One maintenance plumber said "don't do it yourself", I immediately hated him. The next guy I asked about the issue and he told me exactly how to fix it myself and source the correct part. I was astounded by his openness and kindness and most of all his unguarded manner. These are rare people. My people. I fixed the job perfectly fine.
Peoples before money/company does more good than you can imagine.
Thank you so much for sharing this! It gave me the confidence to give it a go myself. A few hours of prep and a few more of work and I've changed 8 valves fixing the mistake of a tradesperson who put one-way valves on the wrong side of 4 radiators (they also put jointing compound on the threads). No leaks first time and I couldn't be happier!
Really well made and trustworthy professional information video. I'd already done plumbing work like this (and more) as a homeowner. Use this guys experience, it's invaluable.
The nod to squash professional rebuttals about losing work is also spot on.
I always champion this style and type of content.
Just fitted a radiator following your video. Saved us £200 plus and everything works. Cheers
Thanks for the video. I had to change two valves after replacing an old downstairs radiator which is on a system with a combi boiler and my plumbing has never gone right before. This worked like a charm. Even to the extent that after allowing water to flow out of the existing valves, when i took the valve off no water came out at all. I had turned the boiler off (as the video advises) and all the other downstairs radiators off as well. The lack of water flowing from the pipes gave me the opportunity to remove the old olives and replace the nut Marvellous!
This is an absolutely brilliant video! Super informative, clear and helpful. Thanks for taking the time to create and post (both) of these videos. I'm an avid DIY'er and love to have a go at things myself first, so this sort of video is exactly what TH-cam was created for IMO. Thanks!
Thanks for this video , just changed a faulty radiator valve after watching this and it worked out a treat !
Mr Ballard thank you so much for sharing your expert advice. Just can't thank you enough
Thanks Mark, This is the second video on this topic I've watched and yours is very clear on the steps and far more helpful as you are not confusing the story by trying to address Combi and gravity in the same video. I have found that the TRV is on the wrong end of the radiator and it has started making a right old racket! I will be trying it out on Saturday as my wife is away for the weekend giving me the chance to clear up if it goes bad!
Thankyou for this video, I’ve always struggled with TRV’s and fitting radiators. I just followed your guide and managed to add two TRV’s to my CH in 2 hours, I did it without draining the system too which I didn’t think was possible.
Re tapered joint. I bought a shank of hemp 40 years ago which I’m still using. Never had a a leak at that joint. ( plenty elsewhere) PTFE should be regarded as a lubricant. It has no bulking out property. Thanks for the video.
Whilst looking at the thumbnail I thought the guy from the Hangover made a career change! Thanks for the tips on changing valves 👍🏻
Must be his twin
Mark, you are brilliant. So generous with your tips and advice. I am about to embark upon changing a couple of TRVs and thought I was going to have to drain the entire system. This is brilliant advice. I've subscribed to your channel, so looking forward to more from you. Thank you
Thanks! Your video gave me the confidence to replace a faulty TRV that wouldn’t shut off - the added bonus of knowing what problems might arise helped me be prepared but luckily it was a straight swap
Anxiety levels for a call back coming back down to manageable. Thank you very much. I'll contribute once I'm not running at a loss!
Thanks very much for this video. I wouldn't have called a plumber for something simple like this as I'm comfortable with DIY, but I just needed tips for the details which I could have searched and pieced together for ages but this video had everything in one place. Will be buying you a pint via the toolbox fund. Cheers.
Excellent video. Thank you for sharing your experience and explaining so clearly. Lots of valuable practical tips that will make a huge difference to any keen DIYer.
Ive been a plumbing and heating engineer for thirty years and I've earned a lot of money putting right and getting out of trouble people that have attempted DIY, things do seem easy until things go wrong, that's when i get a call, keep your videos coming sir, plenty more work for me!🤣👌🏻👍🏻
Damn you, algorithm! Why didn’t you show me this video *yesterday*?
Excellent details about locking upstairs radiators and supporting valves. Thank you.
Great video Mark. Your approach worked perfectly for me - thank you. One thing some people might need to consider is where an adapter is used in a TRV (instead of a normal olive) to step down from 15mm to 10mm.
Thank you for a very interesting and informative video Mark. During the course of my life I've changed many radiator valves. I have always drained the system. This video has shown me something I would never have thought of. The use of PTFE tape on the threads was also a surprise. I knew the olive sealed the valve but I have always taped the thread when reconnecting the valve. I am 71 years old and still learning. Thank you.
I successfully changed out 3 radiator valves for thermostatic valves based on your earlier video. Excellent videos! Thank you for producing them with brilliant detail and confidence inspiring tone!
Huge thank you, really gave my the ability and confidence to change the valve on my radiator. Saved me alot of money on a call out and a plumber. Thanks again, really great video :)
Excellent comprehensive tutorial, thanks very much, gave my confidence to change a radiator valve.
This is the best Video I've seen on this subject!
Best video covering this repair! Thanks for all the information
Really excellent videos, changed my first TRV today having run around town finding some rubber bungs (Toolstation) to isolate my loft tank and depressurise the system. Following the process Mark described, a piece of cake, done in under an hour. Now have 5 more to do, total cost inc valves to complete everything just over £100, absolute bargain compared with a plumber (if you can find one). Thanks Mark, really helpful.
Yep, Marks literally robbing himself. These Internet "plumbers" and other tradesmen giving away experience for free never fails to amaze me.
@@frenchfrench4514 The main reason I've learned to do quite a lot of these basic jobs myself is that all the good tradesmen are very busy and I'd have to wait months. Even if it's a job that will take me a whole day (find out how to do it, visit the shops to find the bits I need and then spend hours methodically working through it, it's probably a one hour job for a professional and I find they're often not interested - they'd much rather take on bigger jobs so that they spend less time doing quotes, driving around from job to job and billing 5 different people. No complaints, they've got to make a living, but I'm not necessarily taking work away from anyone.
@@frenchfrench4514 The truth is - if you costed the homeowners time on a similar basis to a plumber. The time spent trying to find a plumber or getting one to respond and turn up, the homeowner taking time off work to be at the property then it is no wonder that for small jobs it is expedient to DIY (if you have the house). To be blunt - plumbers do not want this sort of work anyway - there are bigger fish to fry.
When you use an adjustable wrench, you should push into the sliding jaw. That way you are supporting/compressing the jaws rather than trying to pull them apart. You were tightening/loosening by pulling away from the slider etc. One of the first things i was taught in my early plumbing days.... Still a good video!
I've used this approach for all my smart valves. 👍
Worked like a dream. Worked well on a lower floor radiator. Thanks for all your helpful advice.
very big help for pepol who can not afford a plumber these days.
Great video a bit long winded but I would rather that than rush a job especially anything to do with central heating. Keep up the good work that you’re doing I am a DIY and cannot afford to keep calling out engineers to do jobs like this as I am also an OAP and have lots of time on my hands, so I would always have a go at anything first myself after watching a video just like thiis. Keep up the good work and thank you.
Many thanks, great video which covers everything I think I need to know and without boring music in the background.👍
I wish that all plumbers are as good as you .... very well done
9:08 - I can't remember where/why I was told to use PTFE on the threads, and have often wondered what's the point for exactly the reasons you gave. I just kept doing it anyway because that's what I've always done - glad you've put my mind at ease and I can now stop doing it! I guess it's the people you learn from knowing it's essential in some cases (e.g, outside taps) and getting in to the habit of doing it on everything without thinking about why.
PTFE on threads is not for sealing, teflon is the most lubricating substance there is. You put it on threads so you can tighten the nut up more past the point friction would allow you too, therfore being able to tighten the joint further and easier which in turn compresses the olive more and creates a better seal. No jointing compound needed then. This guy may have been in the trade a long time but this is the reason plumbers and mechanical engineers use ptfe on threads, plus i've never used ptfe tape to seal anything
@@Dtp2296 never used Teflon tape to seal? Not a gas fitter, then.
@@JasperJanssen and neither will you be if this governmnent carries on much more. None of you will be.
Wow, what a comprehensive demonstration! I have done DIY for years and changed rads etc. But never used this method. Didn't know it was ok to use the same olive on the pipe and I have always used PTFE tape on the nut threads! So definitely learned something today. Thanks for this, top job Mark.
Watching this video exactly because we can't afford to get a man out for 1 radiator. Not worth the time of anyone involved. Ours is actually a towel rail radiator so things are a bit different, but there's a lot to carry over from this vid. Top info, thanks!
Great video, told me exactly what I needed to know, job completed with no issues
Great video first time changing a valve saved me money and I got the job done easy enough. Well done 👍
And this is the SHORT video???😯
Thanks for the video Mark.. I've fitted plenty of valves but felt I better have a refresher and good job I did,, there was a couple of things lets say slipped my mind,ha ,,So thanks again and great video
Brilliant clip much clear & detailed video so other on here are trash with no detail thank you for this is what I’ve been looking for just need some jointing compound 😊
Cheers mate! I thought the hangover was a great film
An impressive head of hair, sir! Respect!
Fantastic demonstration, simplified for any level DIYer, I have a 10mm pipe that is partially blocked with solder inside I cannot change it easily as it is cemented in the floor, any hints on how I can remove the solder please???
When did stu from the hangover start doing TH-cam tutorials 😂
So Clear and Concise. Thanks a bunch Bud
Well done sir got me out of a tricky jam this vid did. thanks again
Great video I'm someone who dose the basics in my own home and would have drained the system, but your way is far better, thanks for sharing
I always drain the system
Great video, thanks. I had two valves to replace, one upstairs and one downstairs. I managed to do both following your advice, and I'm an absolute beginner.
marvelous , you are a educator thankyou
I would add: to minimise draining, I would go round the whole house & shut off all rads at both ends first. Most of the water (and pressure) will stay in the rads, and its a good opportunity to check / lubricate all valves), plug off the top tank (or depressurise a sealed combi system); Also, I made my own tapered bungs to the size I want using a thin cardboard cone & filling it with silicone mastic - leave for a week till fully cured, then soak in water before rubbing off the cardboard. Always add 1L of corrosion inhibitor if you can, it acts as a lubricant apart from anything else. Nice vid, thanks.
I have done a radiator as a DIY. I shut off all radiators in the house at both ends. Then for the radiator I wanted to remove, I drained it at the radiator after scooping out as much loft tank water with a jug and shut off the mains fill with a towel to stop it filling the loft thank. Then I painted the radiator and put a TRV on. I did that to the loft tank to clean with a cloth and remove the scum water. There is a loft tank in my home. I then put inhibitor back in via the cleaning magnetic filter and refilled the system from the mains water in the loft tank. I also shut off the stop cock for peace of mind. Clean loft tank AND a new painted radiator and inhibitor.
@@rtyrtyrtyus Good job. 👍👍
This is just fantastic! Thank you so much, it saved me a pretty penny.
Great video, showing all the details.
Mark, great video, just done my valves without a hitch and very long title bleeding afterwards...just a thought, found an unused mastic spigot a perfect bung for the rad when the valve is pulled away, cut it with a 10mm tail once it was in and snug.....couldn't have done any of the rest of it without your help tho. Many thanks
Great video. Exactly how I change my valves…👍 (keen DIY’er.) saves money on replacing inhibiter and in my case underfloor heating biocide which seems to be really expensive….
What a lovely fellow. Great video, thanks for all the information
your explanations are brilliant thanks
I sometime use a 15mm compression cap on the tails to stop the water
Thanks for great videos. I've now replaced 2 rads, including changing the 4 valves/tails, all new nuts and olives. Did buy an olive puller as too scared to try hacksaw method! Do any of your videos cover new bsp valve into heated towel rail - unsure about whether/where to use ptfe tape/jointing compound.
Great vid, not replacing the olive is slightly risky though.
followed your directions everything went great , a fine tutorial thankyou
Very clear and thorough video. Thankyou.
Thanks for your very helpful tutorial.
Great tutorial! Couple of suggestions, releasing the system pressure from the air release is time consuming and depending on the type of air release can be very difficult to catch the water. Much quicker & cleaner to drain the pressure from the boiler drain point. While you are there, if the boiler is above the rad you are working on, it's helpful to either close the boiler isolation valves or just close the boilers auto air vent. This prevents air ingress and better holds the water inside the system while your working. Very nice to see your use of jointing compound on the olive faces, many 'professional' plumbers use no jointing medium at all!
👍👍👍
Agree with all you said. I would do it that way. Don't want people turning wrong valve as ever boiler is different. Thanks my friend 👍👍👍
The last thing you want to be touching are boiler isolation valves because they are never exercised the minute you shut them then open them the rubber o-ring inside splits and they start weeping from the spindles
@@adierob1 well said mate! stay the f away from boiler isolation
Thank you. I found this video really useful. As a keen DIYer, I have always drained down the whole system when changing valves. Your method is so much simpler, saves time, the risk of unwanted air locks (which I've had) and of course water.
Q- Is it better to put the TRV on the flow side of the radiator?
Good to watch Mark, thank you.
A- I have just replaced the 10 TRVs on my o-l-d system with Evohome wireless controlled valves and this showed me the difference in feeding from Flow and Return sides of the radiator. Feeding from the Return side causes the room temp to vary more than if the radiator is fed from the Flow side. I have not worked out why, possibly compensation devices on the new valve head.
I have noticed that a few of the old valve heads have started to leak, they do operate more than a normal TRV. Guess what I will be doing when the weather warms up, if I don't follow your video first!
Thanks for a very informative video. Can you please clarify the purpose of the jointing compound / ptfe tape. I always believed that it's sole purpose was to help the mating threads slip, enabling a tighter joint with less effort and preventing galling. In the video you state that you only use it on the ends of the olive to help sealing and not on the threads.
Quite so, but I appreciate the effort to dissuade people from thinking that the threaded part is the sealing face of the fitting.
Plumbers insurance jointing compound is
@@Derek_Garnham How do you lubricate the threads to prevent galling? do you assemble them dry?
Absolutly fantastic explanation, thank you so much for taking the time to make these videos you an absolute top heating engineer.
Great vid and will help a lot of people. Just one thing i have to say only coz i found it funny. You said you rolled the carpet back. I dont think there was any carpet in the room coz there are no grippers on the edges. Also in one clip there is a unit on the floor with no carpet under it or any grippers there. 🥴
I do love the bungs saved me many a time from an air lock
Great Video Mark, I have to replace a Bathroom towel radio, and this has given me the confidence to do this, as I have to change the valves as well.
Excellent tutorial 👌🏿 👍🏿
Always useful to put full bore valves on the main supplies so that creating air locks thus no drain down of system is easier. Good also once or twice a year to test such valves as they can corrode and fail over time. Great video.
Glyn, glyn, glyn. Did you really just suggest full bore valves? On the main supplies??
@@JohnnyFontane528 YES! On each floor I have a couple of valves on the flow and return of the heating circuit which enables me to isolate that floor (or zone) whilst I carry out the work. In much the same way, I also always install a 40mm waste pipe which is connected to the waste water system when I install a header tank or hot water/heat sore, it is all about making future maintenance easier, planning in advance and enabling drain downs or value replacements so much easier.
Another helpful video, I used a freeze pack to change a valve, which turned into a right mess as I needed to change the olive at the same time,hence the ice suddenly popped out and I had a nice waterfall. But watching this I can see the mistake I made with the pressure.
Hahaha, been there done that, felt like I was standing Under a waterfall, f only for 5 seconds before. Managed to stem the flow.
Thank you, this was a great tutorial and explained everything that I needed to know, all the little tips really helped. Thank you very much!
Excellent video..Thank you very much for sharing with us,,
Thanks for that Mark, excellent informative video 👍
Thank you so much for this experience and understanding the process
Helpful, relevant and clear. Exactly what I needed, thank you 🙂
I assume the old type one-direction thermostatic valves can be fitted to EITHER side of A radiator, and I also assume the TRV can lie horizontally or vertically, so long as the embossed arrow is in the direction of water flow through the radiator.
Hi Friend . It was a proper explanation and good for the beginner: Thanks
Excellent video. Thank you.
Hi. So helpfull Thank You. I guess the pipes I have that go into radiators are very thin, they are around 5mm diamter. I am worried I will kink the pipe accidentally. Do you think it is still safe to attempt to drain the system on lockshield valve (as I do not have drain valve in a system)? My goal is to drain the system and refill it with cleanser to get rid of cold at the bottom of radiators.
Brilliant stuff. Was just writing, how do you pull the pipe out so far to get the tap off, as ours are held by the floorboards. Then you answered it like you're psychic. Lol.
I like Your video a lot, but have one key observation. The thermostat itself should NEVER be above heating pipe. In this case it should be mounted horizontally not vertically. Vertically mounted themostat is heated with warm pipe below and "thinks" there is warmer in the room than it really is. This disrupts its regulatory capacity.
@@danimayb Principles of Physics.Chapter on heat convection, elementary school. Warm air heated by a pipe rises upward. It tricks the thermostat into thinking the room is already warm and closes the heater too early. The radiator will somehow work, but incorrectly.
that makes sense.
WELL DONE MATE...KEEP UP THE GOOD WORK
Thank you so much! Really helped me out 👍
If you use Oventrop TRV's you can use a tool - and change while heating fully on/operating (type in OV Demobloc) for demo
thanks easy and clear instruction
Liked and watched till the end! Helped a lot and gave some great tips, all changed and functioning again. Only issue I had was water coming back up the exit pipe. Didn't know how to stop this so used your kitchen roll trick👍
I am grateful for this information. I'm a DIYer who will probably attempt this repair myself, although I would rather not. I called several professionals first but here in the US, I am facing a 16 week wait. I've got a towel wrapped around the leaking valve and I have a barrier of chicken wire wrapped around that to keep the kitten and the puppy from trying to lap up the dripping water, which is green with anti-freeze...not healthy for the little animals!
great vid! can you confirm please - I have a rad with the TRV on the return pipe. Is the pipe that heats up first the flow and should the TRV be connected to the flow as best practice? (combi system)
i tend to find so many times that the new fitting wont fit the position of the old olive and its so much fun when it doesnt,don t panic Mr Mannering ,then its a quick freeze and off with the old olive on with the new ptfe and refit .
if i wanted to replace the radiator and valves at the same time, can i follow the same steps of bleeding the pressure closing the valves and then remove the radiator with valves attached keeping the water inside the rad?
The pipe on which my TRV is fitted is fixed in concrete so it looks like I’m going to have to lift the radiator as you demonstrated in your video, I know you said if the radiator was short it might move the valve /pipe work at the other end as you lift, my rad is about 2m in length, won’t that be the same? Pipe work on the valve at the other end of the rad is also into the concrete floor.
@MarkBallardLTD hi mark, firstly thank you so much for your content which has really helped a lot.
Id be ever so grateful for your advice?, A year ago i removed 2 radiators downstairs before plastering and decorating. It took me a while to get around to it but shortly after reinstaling they had leaks at the bottom.
Im getting new ones soon, and wondering about inhibitor.
At some point in next 6 months ill be getting around to replacing all the other old rads.
Am i better waiting until ive replaced all of them, then put inhibitor in, or would you advice to add it straight away when installing the 2 downstairs.
Reason i ask is until having new boiler a few years ago i never touched the back boiler system and all are old radiators. Water was black when removing first time, but clear second time. If ive sludge in upstairs rads will adding inhibitor break it down and move it to the rest of system (and new rads) if so could i be best leaving it until all rads are replaced?
Or should i do belts and braces and add inhibitor, let it break sludge down, then drain system and reapply inhibitor in a few weeks?
In regards so inhibitor is x100 fine for any boiler or does it need to be certain types for different systems and or same as what initially when into the sytem.
Keep up the good work mark, im already thankful for your channel and massive gratitude for any support you can offer. Kind regards Suzi x
Great well explained video
Excellent video
Clever guy so thoughtful & innovative!