BRAND NEW Air Venturi Avenger…New KING of budget PCPs

แชร์
ฝัง
  • เผยแพร่เมื่อ 23 ธ.ค. 2024

ความคิดเห็น • 330

  • @rogerw5547
    @rogerw5547 4 ปีที่แล้ว +4

    Take it apart and see if the poppet is made of better material than the Nova Liberty.There is a problem with the liberty's not holding up.

  • @heathhalfhill6867
    @heathhalfhill6867 4 ปีที่แล้ว +5

    Awesome video. Great information on a fabulous rifle. I have the .25 cal and the Nova Vista Liberty’s in .177&.22 and the Freedom/Aspen in .22 and all are super accurate. Back to the .25...it loves everything I shoot thru it so...I tried some NSA 26.8 grain slugs...shut the front door!...I have been taking pigeons out to 160 yards with them. Holy cow man. It’s pushing them at 920 FPS with the reg set at 2200 psi and the hammer spring at almost max. I knew it was going to be awesome but damn! It is out shooting my SK-19 @ 100 yards and it has a poly barrel! WT heck is that all about? 2200$ vs 317$ and getting it in! Wow. I remember when the Gauntlet came out and all the rave. If they can make a BULLPUP! OMG. I don’t think I need to say anything more. I will be first in line to buy 2. One in .22 and the other in .25. Thanks for the most excellent review brother. God bless. BTW I named my .25 Avenger “Thor”. Not because he is loud like thunder but he is the strongest Avenger 😂👍.Internal 3D printed baffles + a very quiet moderator👍 Church mouse quiet even at 50+ FPE😊

  • @FirstStateAirgun
    @FirstStateAirgun 4 ปีที่แล้ว +20

    You can't beat it!! The plastic sound and feel is what it is. Giving this one some serious consideration for my first entry level PCP. Great job and info.

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว +3

      Thank you! And I agree. The stock doesn't bother me one bit.
      -Donnie

  • @scable-eq7bp
    @scable-eq7bp 4 ปีที่แล้ว +4

    Awesome review, your are so on point about every detail. This well be new gun to hunt hogs with down in Texas. I have done a few hog hunts with Keith Warren down there using single shot break barrel .22 airguns, you have to hit them in the ear or in the eye and keep a 9 mm as a backup just in case they charge you....

  • @zubertish
    @zubertish 3 ปีที่แล้ว +2

    Great review. I think I got the last ever AV Avenger (.25 cal) at the $299 price point. They figured out how good of a rifle they had and jacked the price.
    That aside, it's everything that Donny states in his review. Still WELL worth it at the new price (as of this comment) of fifty bucks higher. Mine shoots like a dream especially after a reg tweak to 2,200psi and a tighter hammer setting. I also added the DonnyFL adapter and moderator in addition to an extra two port barrel band. Yup, she shoots slugs like a champ too. I like the NSA slugs due to their working and price point. Get one whether it's your first PCP or you want a great rifle/slug gun or whatever.

    • @BakerAirguns
      @BakerAirguns  3 ปีที่แล้ว +1

      Right on man! Glad you like it.
      -Donnie

  • @dont4143
    @dont4143 2 ปีที่แล้ว +2

    Good review, thanks.

  • @billreynolds2766
    @billreynolds2766 4 ปีที่แล้ว

    Thanks for your reply Donnie. Both mags were too thick but I got them to fit by filing down the area of the slot.

    • @billreynolds2766
      @billreynolds2766 4 ปีที่แล้ว

      I'm just wondering if anyone else is having this problem too?

  • @justinclarke4226
    @justinclarke4226 4 ปีที่แล้ว +2

    Keep up the good reviews! I’ve been lucky enough to go to your shop and you guys were great to meet. I might have to get one of these avengers.

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว +1

      Right on man! Thanks! I sincerely recommend trying one of these. No BS about it.
      -Donnie

  • @sartainja
    @sartainja 4 ปีที่แล้ว +4

    Superb honest review. Thank you for the sales pitch. You must have been a DJ in a former life. Excellent speech ability.

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว +1

      Thanks for watching! I was a musician, and front man for many bands...but never a proper DJ. That's very kind of you to say.
      -Donnie

  • @nolimitracing9752
    @nolimitracing9752 4 ปีที่แล้ว +8

    I’m patiently waiting for mine to come in. I already pre-ordered mine in .25, also ordered another UTG 4-16x44 and some FX hybrid slugs. The wait is killing me 😩

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว +1

      I feel you man! It won't be long.
      -Donnie

    • @nolimitracing9752
      @nolimitracing9752 4 ปีที่แล้ว

      Thanks for the good review bro. Subbed to your channel also

  • @phillipmendiola2100
    @phillipmendiola2100 4 ปีที่แล้ว +18

    Wow outstanding accuracy 🎯 those are some really tight groups , great presentation and review 🎯

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว +1

      Thank you sir! The gun made it easy.
      -Donnie

  • @drekceldude
    @drekceldude 4 ปีที่แล้ว +10

    On the strength of several reviews last week or so,I've preordered the Avenger in .25 and a adapter and moderator from Donnyfl.
    Happy days.

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว +2

      Right on! I'll bet you love it! Let me know when you get it.
      -Donnie

    • @drekceldude
      @drekceldude 4 ปีที่แล้ว +1

      @@BakerAirguns I already have a very accurate rifle in .22 a FX Streamline,the Avenger is easy way to get into tuning pcp rifles without having to sell a kidney.

    • @jamesjahoda1613
      @jamesjahoda1613 4 ปีที่แล้ว +1

      I saw Donny was sold out. I hope you get it soon. I'm thinking I'll pull the trigger soon.

    • @bugsy742
      @bugsy742 4 ปีที่แล้ว

      Same for the same reason 👍👍👍

    • @drekceldude
      @drekceldude 4 ปีที่แล้ว

      @@jamesjahoda1613 I already got adapter and moderator,I got the Donnyfl Sumo which is very good but it may get in the way when refilling,so mite have to remove mod everytime I refill.
      I should have got either the Tanto or Donnyfl FX mod.
      You live and learn.

  • @troyemmanuel3985
    @troyemmanuel3985 4 ปีที่แล้ว +2

    Based on your review I made up my mind to get one I need to purchase this rifle but I see you guys have none in stock, mostly everywhere I go no. 22 cal

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว +2

      The best way to get one is to pre-order.
      -Donnie

  • @richardcampbell5762
    @richardcampbell5762 4 ปีที่แล้ว +6

    You crack me up brother. Great review looking Forward to seeing more on this rifle. Going to buy one just to add to the collection. Probably hydro dip it in some kind of camo. And fill the stock with something. It's going to be 25cal. Like I said before it's amazing what you can get for your money now days. From New Mexico. Stay safe and blessed my friend.👍🇺🇲🇺🇲✌

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว

      LOL Right on man! Yeah, a camo stock version would be SWEET! Send me pics if you do it please.
      -Donnie

    • @richardcampbell5762
      @richardcampbell5762 4 ปีที่แล้ว

      @@BakerAirguns Will do.

  • @GiosSimCorner
    @GiosSimCorner 4 ปีที่แล้ว +4

    I will be getting this gun. I'm sure someone will make a wood stock or a bullpup conversation kit someday for the Avenger.

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว +1

      Good choice! And I'll bet you're right. I foresee a large aftermarket for this gun.
      -Donnie

  • @ns3938
    @ns3938 4 ปีที่แล้ว +1

    This is definitely gonna be my first PCP rifle. Great review.

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว +1

      Good choice! You'll love it!
      -Donnie

  • @1776adb
    @1776adb 4 ปีที่แล้ว +5

    I opted for the .22 over the .25. Cheaper to shoot and with more weighty ( much more expensive ) ammo will match the .25 in power and be more accurate in the process. Love a hair trigger and this one can be set there.

  • @aboutthemetal8783
    @aboutthemetal8783 4 ปีที่แล้ว +2

    Looks very similar to the fx independence from about ten years ago, Webley made a similar type of rifle called the pardime ,or something like that, but they never hit the market for some reason.

  • @paulynotshore7006
    @paulynotshore7006 4 ปีที่แล้ว +2

    ...all i wanted to hear 'bout this rifle! Excellent video and infos ....damn! Gonna get me one for sure! Thanks!

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว +2

      Right on man! I think you'll love it!
      -Donnie

  • @rodericknelson8371
    @rodericknelson8371 4 ปีที่แล้ว +1

    Nice video!
    What is your opinion between the Avenger and the Gauntlet .25 caliber? Those two are the best in that price range in my opinion.

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว

      Thank you! Avenger, no doubt.
      -Donnie

  • @MOana-zi4dm
    @MOana-zi4dm 4 ปีที่แล้ว +1

    Sorry
    I was not watching this cause i think ill just waste my time but when i watch it i learn a lot from you
    Thank you and sorry again

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว +1

      No need to apologize! It's quite good to be skeptical. I'm glad you found it useful.
      -Donnie

  • @ironhead320
    @ironhead320 ปีที่แล้ว

    Nice rifle I love it but what scope you have on that and those rings are they 1" high

  • @slowpokeairgunner4027
    @slowpokeairgunner4027 4 ปีที่แล้ว +5

    I may have to get one of these, I'll give it a few months, but man this is amazing for the price. Great video.

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว +2

      Right on! Thanks man!
      -Donnie

  • @mman9306
    @mman9306 2 ปีที่แล้ว

    Just got a .25 for Xmas. Nice gun , though was having issues with the scope and noticed the two piece weaver/picatinny rail is not machined properly thus causing cant in the scope once mounted. Can be resolved by getting the CNC machined pic rail from ST. Overall a great rifle.

  • @vonclod123
    @vonclod123 3 ปีที่แล้ว

    This a great rifle! my 1st PCP it shoots tight, and has gobs of power, just starting to play around with the hammer spring setting..

  • @65LB
    @65LB 4 ปีที่แล้ว +2

    Thanks for a great review.
    Also thanks for leaving the text on the screen long enough for the viewer to read itr!
    NOT a trait of the average youtube video producer.
    Good video length also!

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว +1

      Right on, LouB! Thanks for watching.
      -Donnie

  • @gutspraygore
    @gutspraygore 4 ปีที่แล้ว +1

    "I dunno if you know this about me, but I can see the future."
    lol!
    And yeah, the Michael Jackson reference too. Thanks for the video. Great review.

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว

      LOLOL Right on! Thanks for watching!
      -Donnie

  • @howardwinter3455
    @howardwinter3455 3 ปีที่แล้ว

    Excellent presentation. How come I have not seen a review on the .177 version of this gun. I have a question on the proper regulator setting in.177. I have watched every video I could find and nothing on the .177 version. Thank you.

  • @evronaldo.9220
    @evronaldo.9220 3 ปีที่แล้ว

    Test the air Venturi Avenger .177 also accurate shooting

  • @mr.octopus6972
    @mr.octopus6972 4 ปีที่แล้ว +2

    Thank you for this professional review. I just subscribed to your channel.
    Any Q on a canadian version being made ?

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว +1

      Hi! Thanks for watching! I'm not sure about a Canadian model, but perhaps if you contact Air Venturi and suggest it...they might make it happen for you!
      -Donnie

  • @devinpatterson2185
    @devinpatterson2185 3 ปีที่แล้ว

    So when are these things going to be available?

  • @MOana-zi4dm
    @MOana-zi4dm 4 ปีที่แล้ว +1

    Can you make a video about break barrel power source like
    Igt mach 1
    Nitro piston
    Gas ram
    Spring
    And btw should i get a
    Fine Break Barrel or Budget Pcp

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว +1

      The budget PCP will be easier to shoot. I'll see what I can do about the review videos.
      -Donnie

  • @philkennedy342
    @philkennedy342 4 ปีที่แล้ว +2

    That's the sort of review I want to see brilliant work and I especially like if you don't know try it and see it either work or it won't lol nice work and greetings from the uk...

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว +1

      Thanks Phil! There's really no replacement for trying something. You can think about it as long as you want...but you'll never know until you try.
      -Donnie

  • @ianprice2441
    @ianprice2441 4 ปีที่แล้ว +2

    Awesome. I didn't realize it had a second air cylinder!! 👍👍👍👌

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว +2

      Yessir! A true double tube.
      -Donnie

  • @menemenetekelperes4297
    @menemenetekelperes4297 4 ปีที่แล้ว +2

    Awesome review..I think I'm going to get one of these

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว +1

      Thank you very much! The gun is great!
      -Donnie

  • @james67693
    @james67693 4 ปีที่แล้ว

    great video but you didn't show the magazine; what does the magazine look like? ...

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว

      They're the same as the Marauder magazines.
      -Donnie

  • @barthutchison4207
    @barthutchison4207 3 ปีที่แล้ว

    You sound like John Davis from Motorweek. Awesome review too.

  • @heathhalfhill6867
    @heathhalfhill6867 4 ปีที่แล้ว +1

    If this barrel is the same as the Nova Vista Liberty then Air Velocity Sport slugs are going to be the chit. Stephen made them for his Lady Liberty and gets sub MOA. My Liberty’s are not very picky with ammo and I would imagine 6-30 when my .25 Avenger gets here I’m going to be very pleased I think. Thanks for the review. AVS slugs on eBay...American made and high quality. Stephen is a really solid guy and so are his slugs.

  • @hunter-jx4my
    @hunter-jx4my 4 ปีที่แล้ว +4

    Donnie sweet video ! Ive got my 25 cal on preorder ! BUT if I may its my understanding max reg pressure is 3000 psi ! You started stock at 2900 then dropped it to 2500 for your max tune ?? May I ask why you did not leave it at 2900 psi or pump it up to 3000 psi for your power tune ?? I'm a little confused why you'd drop it to 2500 for the power tune !!

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว +4

      Good question. There is more reg pressure than there is hammer spring on my 22 version. The extra reg pressure could not be utilized effieciently.
      -Donnie

    • @hunter-jx4my
      @hunter-jx4my 4 ปีที่แล้ว

      @@BakerAirguns thank you for letting me know that one ! I wish you would have got your hands on the 25 ! Lol I've seen only a few videos on it ! But everyone loves it and says its a hell of a gun and a power house !

    • @nicedward7544
      @nicedward7544 4 ปีที่แล้ว

      There will probably be people putting a heavier spring in the 22 or just swapping in the 25 spring. I will probably be one of those people lol. The bc on monsters and beasts has to be way better than most 22 pellets and i have a ton stock piled. I also like to tinker and will probably open up ports to breath better.

    • @drekceldude
      @drekceldude 4 ปีที่แล้ว

      @@hunter-jx4my Pyramidair dropped the reg to 2600psi on a .25 Avenger with no loss of power from factory 2900psi tune.
      Seems the hammer spring mite not be strong enough to get the most out of a high reg pressure setup,someone mite come up with a aftermarket stronger HS to enable higher power tunes.

    • @mackhomie6
      @mackhomie6 4 ปีที่แล้ว

      @@hunter-jx4my dude, hunter: don't end every sentence--whether question or statement--with an exclamation point (or several...). It's fucking annoying and looks like you're berating everyone from start to finish. you must know this already.

  • @AmericanDefender
    @AmericanDefender 3 ปีที่แล้ว

    Absolutely excited to get mine I ordered from you guys this morning! I'll be reviewing it on my channel.

    • @BakerAirguns
      @BakerAirguns  3 ปีที่แล้ว +1

      Awesome! You're gonna love it!
      -Donnie

  • @nicedward7544
    @nicedward7544 4 ปีที่แล้ว +5

    Expected delivery to PA was supposed to be tomorrow. Checked yesterday and it changed to the 30th. Just checked again today and it says 7/06. Changed twice in 2 days damnit. Argghh. Can i just change my pre order to baker and y'all can just send me that 22? Lol

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว +1

      I know, right? They're coming. Should be the first week of July as far as I know.
      -Donnie

    • @nicedward7544
      @nicedward7544 4 ปีที่แล้ว

      @@BakerAirguns good review though. I'm excited to get my hands on one. I can't wait to see after people get to experiment with them over time. I have high hopes of this being 50fpe capable in 22 with some tuning and possibly opening up ports. Hell I'm happy with your quick 39fpe tune. I have tons of super heavy 22 lead ( monsters and beasts) but gave my only 22 away to my friends son for his bday. Been looking for an inexpensive 22 that will push these thousands of heavy pellets i have stockpiled

    • @nolimitracing9752
      @nolimitracing9752 4 ปีที่แล้ว

      Same here. Mine said in-stock date of June 30. I see it changed to July 6th now. I hope it doesn’t get pushed back again

    • @nicedward7544
      @nicedward7544 4 ปีที่แล้ว

      @@nolimitracing9752 i know trying not to think about it lol. Was hoping it was going to be shipped by Monday

  • @jefft.7584
    @jefft.7584 3 ปีที่แล้ว

    Good job. I just got mine last week in .177. It's a tack driver.

    • @BakerAirguns
      @BakerAirguns  3 ปีที่แล้ว

      Right on! They sure are!
      -Donnie

  • @KT-en8pq
    @KT-en8pq 4 ปีที่แล้ว

    I used to use epoxy and bird shot on cheap hollow stocks. Can the stock be easily taken off and bedded or filled to add rigidity or bedding?

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว

      You could certainly do some mods, yes.
      -Donnie

  • @gino2033
    @gino2033 3 ปีที่แล้ว

    Thank you for the great video. In your opinion what is a:
    1. Price effective optic
    2. Price effective Compressor

    • @BakerAirguns
      @BakerAirguns  3 ปีที่แล้ว +1

      Thank you! The UTG scopes are good for the money, but naturally you get more scope for more money. The compressor...Air Venturi Nomad hands down.
      -Donnie

  • @1776adb
    @1776adb 4 ปีที่แล้ว

    Preordered one in .22 cal. Yet to be received but with all the hoopla can’t wait to take possession. Good video - Al Baker.

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว

      Thank you, Al! Let us know what you think after you get it.
      -Donnie

    • @1776adb
      @1776adb 4 ปีที่แล้ว

      Baker Airguns Will do- take care. Ps. At 76 still hand pumping to keep in shape.

  • @Monkeydad1969
    @Monkeydad1969 4 ปีที่แล้ว +1

    Nice info, nice comedy...great vid Donnie. I really like this one from you. 👍🏽👍🏽👍🏽

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว +1

      Thanks man! It's my pleasure!
      -Donnie

    • @Monkeydad1969
      @Monkeydad1969 4 ปีที่แล้ว

      @@BakerAirguns right on!

  • @dwaynecupp6708
    @dwaynecupp6708 4 ปีที่แล้ว +1

    Where do you think a good place to start for the "max" tune on the .25 model?

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว +2

      I'd max out the hammer spring, then shoot full strings from max pressure. Then make note of whether the velocity increases or decreases when you get "off the reg." If it increases...keep shooting until it starts going down. Whatever pressure right before that happens at is your ideal "max power" pressure.
      -Donnie

  • @markmtbrider
    @markmtbrider 4 ปีที่แล้ว +1

    Awsome. A silver lining to 2020. I hope you can tune one down to 20 fpe.....

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว

      You sure can! That's how this one is tuned now. It's just under 20fpe and rocking a DonnyFL Sumo and serving as my backyard critter-getter.
      -Donnie

    • @ElyFrankes
      @ElyFrankes 4 ปีที่แล้ว

      @@BakerAirguns
      What is that 20 fpe tune like?
      Min reg?
      Min hammer?

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว

      @@ElyFrankes Reg at about 2400psi, hammer spring on minimum.
      -Donnie

  • @vince-jn6mk
    @vince-jn6mk 4 ปีที่แล้ว

    Aloha Donnie. Just getting into pcp guns. Like this Avenger for my first air rifle. What is the scope and mounts and what moderator would you put on for backyard target shooting. Could you also recommend a filling tank and the accessories needed for filling. Thanks and look forward to ordering with your recommendations.

    • @gyhtbt8176
      @gyhtbt8176 4 ปีที่แล้ว

      Did you get an answer on the scope? UTG? Leapers? Optisan? Don’t want to overspend.

  • @bigearl8687
    @bigearl8687 4 ปีที่แล้ว +1

    I ordered 1in 25cal yesterday , hopefully it shoots well

  • @heathhalfhill6867
    @heathhalfhill6867 4 ปีที่แล้ว

    If the internals are close to the Liberty’s you can...with a little tinkering...get 50 FPE with slugs in .22 cal. Regulator was set at 2300 psi, ported, bigger plenum, PEEK valve, heavier hammer spring, and AVS slugs. It can be pushed a bit more if need be. Great gun for a tinkerers.

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว

      I agree. This is a great tuners gun.
      -Donnie

  • @eddievasquez2897
    @eddievasquez2897 3 ปีที่แล้ว

    I prefer a lighter rifle. Can foam fill plastic. I will buy the synthetic always if it's 6lbs.

  • @MOana-zi4dm
    @MOana-zi4dm 4 ปีที่แล้ว +1

    I have so many questions but should i buy a .22 or .25

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว +1

      One of each. LOLOL
      -Donnie

    • @MOana-zi4dm
      @MOana-zi4dm 4 ปีที่แล้ว

      @@BakerAirguns hahaha

  • @bltefft
    @bltefft 3 ปีที่แล้ว

    Hi Donnie, counting both air tubes, how much air can the Avenger hold?
    The Daystate Wolverine R you set my up with is doing great. I want this Avenger to be my first .25 caliber airgun. I'm interested in the adaptor you mentioned so I can run a silencer on front. I'll be calling.

    • @BakerAirguns
      @BakerAirguns  3 ปีที่แล้ว

      Right on! Glad you like it. The Avenger holds 180cc.
      -Donnie

    • @bltefft
      @bltefft 3 ปีที่แล้ว

      Today, I bought one from you. Looking forward to shooting it.

    • @BakerAirguns
      @BakerAirguns  3 ปีที่แล้ว

      @@bltefft Thank you very much! You're gonna love it.
      -Donnie

  • @dlbarb
    @dlbarb 4 ปีที่แล้ว

    When are they going to arrive from across the pond???????

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว

      Our latest shipment should arrive tomorrow. If you have a pre-order in place it should ship soon.
      -Donnie

  • @jaimebriones2792
    @jaimebriones2792 4 ปีที่แล้ว

    How to order and shipping to the phil

  • @rogerjames6797
    @rogerjames6797 4 ปีที่แล้ว

    Why is the 22 shooting the same or slower than the 25 ?

  • @jasonacevedo539
    @jasonacevedo539 3 ปีที่แล้ว

    Great review I’m curious to know if you have any experience with the umarex origin? I’m between that one and the Venturi any suggestions?

    • @BakerAirguns
      @BakerAirguns  3 ปีที่แล้ว

      Hello. I have not yet played with the Origin. I can vouch for the Avenger though. You can't go wrong.
      -Donnie

  • @wascalywabbit
    @wascalywabbit 4 ปีที่แล้ว +1

    I thought this was exclusive to AD/PA as their own in house brand...didnt know other retailers have this

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว +1

      Baker Airguns is a proud Air Venturi dealer, same as AD and PA. We're just a little better looking over here at BA. LOLOL
      -Donnie

  • @nunya6874
    @nunya6874 4 ปีที่แล้ว

    How do you think this gun compares with the Umarex gauntlet at the same price point. These are my 2 choices that I’ve narrowed down to....as a side note I will be using whichever I pick for small game squirrel/rabbit hunting

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว +1

      Go with the Avenger. No question.
      -Donnie

    • @nunya6874
      @nunya6874 4 ปีที่แล้ว

      Baker Airguns very much appreciate the response. Do ya have any specific reasons as to why that would be the way you would go?

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว +1

      @@nunya6874 It's just a better gun in every way.

    • @nunya6874
      @nunya6874 4 ปีที่แล้ว

      Baker Airguns ok fair enough lol. Like I said I very new to all this buttttt I can see an unbiased review from a mile away. I’m sure I speak for a lot of folks when I say I APPRECIATE IT. Pretty sure I watched way too many “sponsored” Gamo reviews before I purchased my first airgun and well....400$ worth of scopes later I have no choice but to go pcp. On a side note do you have any experience/opinion on the Diana recoil reduction mount. Believe it’s called a bullseye mount

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว

      @@nunya6874 Right on man. The Bullseye mount usually works pretty good on a springer.
      -Donnie

  • @silveradochevy2474
    @silveradochevy2474 4 ปีที่แล้ว

    Seneca Aspen or Nova without the pump so they eliminated the pump problem BRA fucn O.

  • @FloridaRaider
    @FloridaRaider 4 ปีที่แล้ว

    I'm new-ish to air guns. I've had a Gamo urban for a few months.. Love it. But now interested in this in 25 cal. I'm not used to tuning or multiple gauges. Is tuning easy for a novice or should I take it somewhere to be tuned. Maybe it is just right out of the box, I don't know.

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว +1

      I would shoot it right out of the box for a while. At the same time, research airgun tuning and slowly start to play with it. Make sure you know your initial settings, and write them down. That way you can return to stock if you need to.
      -Donnie

  • @varmintsniper2551
    @varmintsniper2551 4 ปีที่แล้ว

    When’s the metal wood version coming out? $600 sounds reasonable.

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว

      As far as I know, there are no plans for a wood stock version.
      -Donnie

    • @varmintsniper2551
      @varmintsniper2551 4 ปีที่แล้ว

      Baker Airguns that one has way too much plastic. I doubt it will hold up after all the hype wears off.

  • @MissionaryInMexico
    @MissionaryInMexico 4 ปีที่แล้ว +8

    40,000+ views in 3 weeks means 1 out of 100 will buy the gun because of you. Air Venturi owes you a 5% commission in 400 guns valued at $300 each, or 400 x $15, or, $6,000. Hope they pay you!

    • @aceliu5997
      @aceliu5997 4 ปีที่แล้ว +1

      1 out of 100 is low. I think 15% at least. People watching this dont just watch. They have had or owns an gun themselves. Im getting my first pcp and its this one.

    • @MissionaryInMexico
      @MissionaryInMexico 4 ปีที่แล้ว +3

      @@aceliu5997 I agree... The number is probably higher

  • @shainejackson5829
    @shainejackson5829 4 ปีที่แล้ว

    Hey Donni u want to sell your avenger. Since they are never going to be in stock. At least this year it looks like.

  • @js1cowboy1
    @js1cowboy1 4 ปีที่แล้ว

    What is the size of the adapter you need to buy to attach a DonnyFL Moderator?

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว +1

      I'm not sure of the size, but we'll have them listed on the Baker Airguns website shortly.
      -Donnie

  • @gmanneod8085
    @gmanneod8085 4 ปีที่แล้ว

    Thanks for the quick look rifle review Donnie. So with a tune at 2500 PSI and 2900 PSI what will be the best way a new PCP shooter will be able to fill this beast to 4300 PSI? Hand pump is a no go!! Bottles will have to be very large and expensive!! I guess a compressor will be the must have for what $$$? What do you suggest for a fill source?

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว

      While it CAN be filled to 300BAR, it doesn't HAVE to be filled to 300BAR. You can tune it to operate well with a lower fill pressure with ease.
      -Donnie

  • @davidbarnett3594
    @davidbarnett3594 4 ปีที่แล้ว

    can i buy it in the Philippians and for how much ??????

  • @KINGBREAKBARREL
    @KINGBREAKBARREL 4 ปีที่แล้ว +1

    WOW DUDE U ARE A HELL OF A SPOKES MEN. FOR WHO EVER U WORK FOR...
    ITS SOLD ILL BE PURCHASING ONE THIS FRIDAY DEFINITELY....

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว +1

      Thank you very much! I'm sure you'll love it!
      -Donnie

  • @oleolesen5648
    @oleolesen5648 4 ปีที่แล้ว

    Can I bye avenger in Europa

  • @MrPrimoPR
    @MrPrimoPR 4 ปีที่แล้ว

    Can it be used with a 3000 psi scuba tank , I don’t have access to 4500 psi , and I want to shoot 14.3g at 850 FPS ? If the previous can be done do you have an idea what shot string to expect having the regulator adjusted to. 1200 psi. Another thing, please tell me the side of the inboard tank in CC or inches.

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว

      The gun can very much be adjusted to run at a lower fill pressure.
      -Donnie

  • @heithwatkins
    @heithwatkins 4 ปีที่แล้ว +2

    Iam buying one of these. But what drives me crazy is this. Why do all of this and not give bottle feeding.
    I put a 360cc bottle on my 177 Umarex Gauntlet and now get 150 shots, using 10.34gr JSB at 860 fps.
    Make this bottle fed, with a adjustable cheek piece and it will be perfect.
    But I still love it as is and will buy it. 👍👍🍻🍻🍻

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว +2

      Who knows? Maybe you can be the guy that comes up with a bottle mod or aftermarket stocks? I predict there will be a vast aftermarket for this gun. Someone is going to capitalize.
      -Donnie

  • @eeassa
    @eeassa 4 ปีที่แล้ว

    How quiet is this compared to the Marauder?

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว

      A smidge louder without a can.
      -Donnie

  • @fernandocardoso9657
    @fernandocardoso9657 3 ปีที่แล้ว

    Como consigo trazer ela para o Brasil amigo ?

  • @nickhathaway4617
    @nickhathaway4617 4 ปีที่แล้ว

    Did you try the factory set reg pressure and maxed out hammer spring

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว

      Sure did. It did not gain any power over my "maxed out" tune.
      -Donnie

  • @addictionc7018
    @addictionc7018 3 ปีที่แล้ว

    Couldn't find one under 390 for the

  • @bigearl8687
    @bigearl8687 4 ปีที่แล้ว

    will the marauder mags fit the avenger? & have you had any issues with your scope rail screws not tighten up

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว +1

      It looks like they would, but I haven't tried. No issues at all with the scope rail.
      -Donnie

    • @bigearl8687
      @bigearl8687 4 ปีที่แล้ว

      @@BakerAirguns mine want tighten up with the rail on it, I took it off and they did, now the very back screw is doing the same thing, now only 1 screw is tight..I did get a chance to shoot it & at 25 yards, it was a 2 pellet hole jsb 25g 25cal

  • @CobosDoesItAll
    @CobosDoesItAll 4 ปีที่แล้ว

    Where is this "additional content" you spoke of donnie?

  • @brighter22
    @brighter22 4 ปีที่แล้ว

    what pellet size is best accuracy at 50 yds? .22 or .25?

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว

      You just have to try some and see. I've seen good results with several JSB pellets.
      -Donnie

  • @garywhelansr5602
    @garywhelansr5602 4 ปีที่แล้ว

    Are these in stock at your shop? It d be my first pcp have a Benjamin Prowler 22 rite now. This seem like a common man pcp it wont drain the bank

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว +1

      We actually do have the .177 in stock right now. The other calibers are pre-order only.
      -Donnie

    • @garywhelansr5602
      @garywhelansr5602 4 ปีที่แล้ว

      @@BakerAirguns ok im interested in 22cal for hunting

  • @Sinnernine
    @Sinnernine 4 ปีที่แล้ว

    Is this better than the umarex gauntlet?

    • @BakerAirguns
      @BakerAirguns  3 ปีที่แล้ว

      Very much so.
      -Donnie

    • @Sinnernine
      @Sinnernine 3 ปีที่แล้ว

      @@BakerAirguns thx for responding but as of 2021 are there any air rifle that can compete with this Venturi with a price point of 300$-400$ ?

  • @allanwind295
    @allanwind295 4 ปีที่แล้ว

    Great video. I liked how you shared that little tidbit that the groups you showed was average of 20 groups. You need to show sub 1" groups at 100 yards to support your "sub-moa accuracy" claim (IMHO). I have come to really appreciate short guns (i.e. bullpups) so while compelling this one is not for me. Hopefully they sell a boat load of these.

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว

      Thank you very much! Indeed, there will be some 100yard footage in the future.
      -Donnie

    • @stulio2
      @stulio2 4 ปีที่แล้ว

      Sub moa is sub moa whether at 20 yds. or 200 yds. Has nothing to do with inches. Minute of angle is an angular measure.

  • @dustind.5246
    @dustind.5246 4 ปีที่แล้ว

    Which do you think is better? Hatsan flash qe or the Avenger

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว +1

      Avenger. Hands down.
      -Donnie

    • @dustind.5246
      @dustind.5246 4 ปีที่แล้ว

      @@BakerAirguns thank you👍

  • @luckylarry5112
    @luckylarry5112 4 ปีที่แล้ว +1

    Waiting on the bullpup version next year...

  • @edwardtantoysapsal8166
    @edwardtantoysapsal8166 4 ปีที่แล้ว

    How much money shipping the Philippines sir

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว

      I'm sorry, but we do not ship outside the USA.
      -Donnie

  • @MWS67
    @MWS67 3 ปีที่แล้ว

    Nice looking gun but operating PSI is too high unless you have your own compressor.

  • @joeltacbad2321
    @joeltacbad2321 4 ปีที่แล้ว

    How can I have it in 300$ I am from the philippines how transaction to have that gun thank you

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว

      Hello. I'm sorry, but we do not ship outside the USA.
      -Donnie

  • @kannabuddharaju
    @kannabuddharaju 4 ปีที่แล้ว

    Isn't it little heavy to load 300 bar?. if Air Ventury brings it down to 200-225 bar, and with that accuracy it will rule the market.

  • @ElyFrankes
    @ElyFrankes 4 ปีที่แล้ว

    How big is the combined air capacity of the 2 air tubes?

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว +2

      180cc
      -Donnie

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว

      @The94GTC No. Two tubes. I show you in the video.
      -Donnie

  • @rickpanganiban4001
    @rickpanganiban4001 4 ปีที่แล้ว

    How to order sir?

  • @jacebigelow
    @jacebigelow 4 ปีที่แล้ว +2

    Great review Donnie !! Thank you ! If you ever have aftermarket stocks or an upgrade kit, be sure to feature them !! I wish it had a thumbhole stock design but as a previous commenter said, it is what it is. And it is light, so no complaints.

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว +1

      Thank you! Yeah, there will be more on this gun in the future for sure.
      -Donnie

  • @Abrar8574
    @Abrar8574 4 ปีที่แล้ว

    It will work on 200 yards?

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว +1

      The question is, can YOU get hits at 200 yards. It will certainly throw a projectile that far.
      -Donnie

  • @elvisdsr
    @elvisdsr 4 ปีที่แล้ว

    I hope we have this pcp In Brazil..great rewieu man...the best so far...

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว

      Thank you very much! I hope you guys get it there as well. You'd LOVE it!
      -Donnie

  • @briant6669
    @briant6669 4 ปีที่แล้ว

    Id love to see a walnut option for $499 but I think I will have to try this out. I wanna run it side by side with my streamline and dreamlines and see how it does.

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว +1

      I feel you! I'll bet the aftermarket provides some options fairly soon.
      -Donnie

    • @joshuagibson2520
      @joshuagibson2520 3 ปีที่แล้ว

      Curious if you have made that comparison in the 6 months since your comment? Would love to know what you hate and love about the avenger, as well as your FX guns. Is there anything the avenger does as good or better than the FX?

  • @therrienmichael08
    @therrienmichael08 2 ปีที่แล้ว

    I would definitely get the Avenger .25 cal. over the Gauntlet even tho I have an Umarex Origin .22 cal.

  • @extremehuntingandfishing9984
    @extremehuntingandfishing9984 4 ปีที่แล้ว

    Do the jsb knock outs fit in the magazine?

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว +1

      Yes they do! Far out, right?
      -Donnie

    • @extremehuntingandfishing9984
      @extremehuntingandfishing9984 4 ปีที่แล้ว +2

      Sweet! do you think I'll be able to fill it with a hand pump? I can pump my other gun from 0-3000psi with ease but 4350psi seems a little tuff.

    • @CobosDoesItAll
      @CobosDoesItAll 4 ปีที่แล้ว +1

      @@extremehuntingandfishing9984 i wanna know too.

    • @heithwatkins
      @heithwatkins 4 ปีที่แล้ว +2

      @@extremehuntingandfishing9984 Since it has a adjustable regulator. You can fill to lower pressure with the hand pump.

    • @extremehuntingandfishing9984
      @extremehuntingandfishing9984 4 ปีที่แล้ว +3

      @@heithwatkins Yes, but then I give up Some shots or I keep some shots and lose some power. Baker Airguns You should do a 'can you hand pump the avenger' video. Even If I cant pump it all the way I'm still going to buy it that accuracy is amazing!

  • @YourCreatorGod
    @YourCreatorGod 4 ปีที่แล้ว +1

    Thank you so much.🌹👈✌😁

  • @tonydavisbusiness
    @tonydavisbusiness 4 ปีที่แล้ว

    What's the strongest fpe?

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว +1

      Out of the .22....about 40fpe.
      -Donnie

    • @tonydavisbusiness
      @tonydavisbusiness 4 ปีที่แล้ว

      @@BakerAirguns Thanks, what about the .25?

  • @RandyMangumTannerMangum_611
    @RandyMangumTannerMangum_611 2 ปีที่แล้ว

    What scope do you recommend with this one?

    • @BakerAirguns
      @BakerAirguns  2 ปีที่แล้ว +1

      Depends on lots of factors. The cheapest I'd go is like a Hawke Vantage or UTG.
      -Donnie

    • @RandyMangumTannerMangum_611
      @RandyMangumTannerMangum_611 2 ปีที่แล้ว

      @@BakerAirguns thanks!

  • @benjiesarpamones7102
    @benjiesarpamones7102 4 ปีที่แล้ว

    Do you have store in the Philippines?

    • @BakerAirguns
      @BakerAirguns  4 ปีที่แล้ว +1

      I wish we did, but unfortunately....we do not.
      -Donnie

    • @benjiesarpamones7102
      @benjiesarpamones7102 4 ปีที่แล้ว

      @@BakerAirguns thnx, for the reply Sir,