How To: Installing Yonaka Steel Motor Mounts B/D Series
ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2024
- Instagram - Lutz.skunkworks
How to video of installing Yonaka steel solid motor mounts in my B16 swapped Ek civic, They made a pretty big difference and so far I love em!
Pick them up here from Street Imports: Part Number (YMMM005)
www.ebay.ca/it...
![ตีสิบเดย์ [FULL] | อาจารย์โอเล่ ญาณสัมผัส ผ่าดวงคนดัง ประเทศไทยจะเป็นยังไงหลังจากนี้!](http://i.ytimg.com/vi/gszT2O76fL4/mqdefault.jpg)
Silicone spray/lube! No WD40 it’ll rust later... collect dirt in the mean time. Trust me .
Thanx for this, been in the Honda scene for a couple years and I’ve learned alot of TH-cam, lol I’m a loser with no homies n the ones I have can’t do shiiiiiiiiiiii 😂
The best way to learn now is youtube and getting your hands dirty!
Wish you did a drive with them so we can hear whether it vibrates inside while driven.
That is an excellent idea actually.. Hopefully I can pickup another set for my new civic and I will Definitely do that. There was absolutely a noticeable vibration but it wasn't unbearable. if you had anything metal in your glove box it would definitely let you know.
Nice video, just ordered these. Hope it'll make my little D16 feel a bit more "racecar" haha
Oh you're going to love them that's exactly what they'll do. Let me know what you think of them once you have them in!
D16 is very reliable. Thanks for keeping the SOHC 👌🏼
I’m just concerned the interior will vibrate constantly. I think the oem feel is much nicer than when using solid mounts but idk it they have options for upgrades mounts that won’t be too stiff
My dear Mount has this long bolt through it with a nut on the end there is slack between the bolt and the bracket it's going through like the bolt isn't wide enough . Got the car like this and letting off the gas it clunks pretty bad trying to figure out what bolt or mount that will fix that the mount looks fine but the bolt has slack it can slide left to right but again has bolt that holds in from sliding but so far it's confusing for me
Very helpful thanks
Glad it could help!
Would this work on a B20 Swapped integra?
My ek has a d-series in it, so that upper driver mount is self explanatory? Just ordered a set from plm.
Does anyone know the dimension sizes for the driver side mount and passenger side? I’m missing a few bolts. I got a 2000 civic ex manual transmission
Hello how are you doing am putting a 94 engine gear box Honda Civic in a 91 Honda Civic body. I was wondering which kit I could purchases to get the job done.
Did this come with hardware? In case it didn’t, do you know where I could get the hardware for the mounts?
Use the factory ones or buy brandnew factory bolts
How does it drive? Does it give a harsh vibration in the cabin?
Honestly at first it was pretty noticeable especially going from worn out rubber mounts but I don't even notice them anymore!
Do they raise the engine a little bit ?
Hey, sorry for the late response! I had pretty worn out mounts but it didn't raise it any noticeable amount, maybe a 1/4" if anything.
Ran into a problem with tranny mount and upper driver side. 2 bolts on tranny don’t screw in tight anymore. They’ll screw in tight then get loose again. Same with one bolt on upper driver side. Any suggestions?
Are these the bolts that thread into the transmission itself or the frame? And on the driver side is it the stud off off front of the engine you're talking about?
@@RaineLutz they’re the bottom 17mm bolts that thread to the frame on the tranny mount. And for drivers side it is the the bolt that threads to driver side upper mount on the frame, I believe it’s 14mm. So far looks like ima have to drill into the frame to get a hold of the nut that’s inside. May have detached itself from what I researched. 😪
@@r0ssisdad unfortunately the only help i can give would be try some longer bolts for the transmission, and as far as the driver side i hope thats not the case cause that could be a bit of work to remedy that.. Let me know what you find and if you get it fixed up, best of luck though!
Yo bro having the same issue did u ever find a solution?
Are these good with hydraulic trans
Oh yeah I had a hydro Trans as well and they fit perfectly !
@@RaineLutz do you have a link for the motor mounts you have?
@@antisocialcarl5443 did you want the steel or aluminum ones. The ones in this video are the steel ones and are cheaper but they serve the same function
@@RaineLutz aluminum
@@antisocialcarl5443 www.ebay.ca/itm/Yonaka-Honda-Civic-96-00-Motor-Mounts-ALUMINUM-EK-D-B-Series-B16-B18-D16/313425238866?epid=13035021719&hash=item48f9999b52:g:IUkAAOSwhWZgL90K
Plain and simple other videos are frustrating to watch honestly
Hey thank you I appreciate it!
This engine mount are scrap
I love them and for the price you can't go wrong!