You’re so right. I forget Klipper has multiple MCU functionality so I guess you could just connect loads of board up? I know a single pi can control multiple printers. Wonder what the limit is.
Dang it Spencer! Stop ripping off my Ultimaker Music videos that I made like 10 years ago! 😂 Hahahaha, I love how loud that Anycubic is! Not a single F was given to making that printer quiet! It is like listening to R2D2 and C3PO waxing each other off on tattooine 😎
What printhead model is that? Looks interesting and lightweight, and has place for 2x 5015 fans. I recently got Orbiter 1.5 and have a hardtime choosing a lightweight mount, tried printing MarsOrbiter from PETG but feels heavy and bulky.
It’s called the HeroMe Gen7! I’ve got a video on it! It’s lightweight and highly customizable. I’d recommend using ASA rather than PETG as it’s got a lower density, higher rigidity, and even higher temperature resistance!
@@SpencersDesk Ah right, the HeroMe Gen7! I had its zip downloaded but there was hundreds of .stl in there, easy to get lost, I thought it only supported Orbiter 2.0 and not 1.5, I will have a look again, last time I could not find the part that allows 1.5 to be mounted.
@kylek3377 the video I have walks through the part one at a time which may help! If you need help, feel free to shoot me a message on the channel’s discord!
@@SpencersDesk I see the 'HMG7 Orbiter V1.5 Front Mount.stl' and 'HMG7 Orbiter V1.5 Rear Mount V2.stl' now, thanks for all the help! I found your channel when I initially looked up Input Shaping! (video was excellent), once I finish building a new printhead for my Ender 3 (Orbiter 1.5, Phaetus Dragon UHF, HeroMe G7), I will setup up Klipper (also got SKR Mini E3 v3.0 that will go in)
Grrr, if you’re running Klipper you may be able to switch out of the silent mode? Depends on your setup I guess. So cool that you tried it out though!!
That moment you wish you had an older Creality mainboard for less silent stepper drivers? 🤣 Great job!
Haha, they’re TMC2209s. They used to be silent but they’ve become very noisy recently. Trying to pretend they aren’t though😂
just turn off microstepping in the firmware, should turn them back to original noisy
Okay, a few more printers and essentially you can have your own Portal 2 turret opera 🥰
Fantastic work, super impressive!
Wow what a great idea. I’m curious how difficult it would be to sync them all up! Thanks for your kind comment!
One octopus running two printers would already give you a duet without a new process.
You’re so right. I forget Klipper has multiple MCU functionality so I guess you could just connect loads of board up? I know a single pi can control multiple printers. Wonder what the limit is.
this actually slaps
Finally a use for my Ender 3 that has been collecting dust!
What else are printers good for??
The moment you've lost every idea, what to print.😂
I’m pretty sure I do way more playing with my printer than printing with my printer, haha
very impressive!
i will play this when i'm sleeping
beautiful.
I want my Kobra neo to play this! ahaha so awesome!
It’s available ;)
@@SpencersDesk oh oh!
i caught my 3d printer playing the first part accidentally before resuming to make random noises and it kept repeating for a while, love the noise
Haha, I forget what I was printing, but I swear my printer was playing that Unholy song by Sam Smith
now i know why my projects never get finished lol
Wow Spencer! Excellent job hahaha
Thanks friend!
Dang it Spencer! Stop ripping off my Ultimaker Music videos that I made like 10 years ago! 😂 Hahahaha, I love how loud that Anycubic is! Not a single F was given to making that printer quiet! It is like listening to R2D2 and C3PO waxing each other off on tattooine 😎
Haha I just watched it. I love how the steppers give that NES era sound!
What printhead model is that? Looks interesting and lightweight, and has place for 2x 5015 fans. I recently got Orbiter 1.5 and have a hardtime choosing a lightweight mount, tried printing MarsOrbiter from PETG but feels heavy and bulky.
It’s called the HeroMe Gen7! I’ve got a video on it! It’s lightweight and highly customizable. I’d recommend using ASA rather than PETG as it’s got a lower density, higher rigidity, and even higher temperature resistance!
@@SpencersDesk Ah right, the HeroMe Gen7! I had its zip downloaded but there was hundreds of .stl in there, easy to get lost, I thought it only supported Orbiter 2.0 and not 1.5, I will have a look again, last time I could not find the part that allows 1.5 to be mounted.
@kylek3377 the video I have walks through the part one at a time which may help! If you need help, feel free to shoot me a message on the channel’s discord!
@@SpencersDesk I see the 'HMG7 Orbiter V1.5 Front Mount.stl' and 'HMG7 Orbiter V1.5 Rear Mount V2.stl' now, thanks for all the help! I found your channel when I initially looked up Input Shaping! (video was excellent), once I finish building a new printhead for my Ender 3 (Orbiter 1.5, Phaetus Dragon UHF, HeroMe G7), I will setup up Klipper (also got SKR Mini E3 v3.0 that will go in)
@kylek3377 Oo super exciting man! Hyped for you and thanks for the kind words!
Do you have an STL for the Z mount for the motor? It looks more secure than the ones creality gives
I don’t sorry. It comes stock with my machine (Anycubic Vyper). Nice profile pic btw
hey look we use the same logitech webcam!
I hate to say, that webcam is counting down its last days on my printer
@@SpencersDesk aww man
Turn off the silent in the driver to more noise = more sound.
I’m embarrassed to say that I don’t have stealth chop activated in these.
Did you do that manually or you've got some automated?)
I created a program that turns music to gcode! Video on my channel
is this a kobra neo v1?
Close! Anycubic Vyper
whats the build size of your 3d printer
It’s a modified AnyCubic Vyper. I believe it’s X-250 Y-255 Z-260 or something? This song exists between 5-240 for the X and Y axes though!
Works on a ender 220x220 unfortunately it has silent stepper drivers
Grrr, if you’re running Klipper you may be able to switch out of the silent mode? Depends on your setup I guess. So cool that you tried it out though!!
Very clever! But can you get it to _print_ a fleur-de-lis while also playing Für Elise *at the same time?*
Well, can ya? Huh? Can ya?! Eh?!
😜😆
A cocktail printer. Hmmm…..
G-code?
Gonna have to watch the video I made on this subject!
Midi to gcode?
Nope!
@@SpencersDesk Ohh may I ask how? lol
Ohhh you have a video right before this :)
Sorry, bit of a cheeky nope, I should have elaborated😅
The poor cable managment destracted alittle.
You have no idea how hard it is to ignore it. Promise I’m working on it