Sorry for the sound of some clips. Have some problems with my microphone apparently. I tried to improve it in my edit program where it sounded good but on youtube it sounds too loud. If you want my Biax Clone drawings, watch this video for a discount code >>> th-cam.com/video/mda_uz0fkqE/w-d-xo.html
I'm just guessing, but the mystery metal might be babbit or tin. But then again it could be something entirely different. I do the same thing with my machines if they aren't working exactly right I have to know shy and then get it fixed. I wish you luck. I'll be looking forward to the next video. KOKO!
My Southbend 7 inch has a grub screw in the bottom of the rocker arm and a flat spot on the shaft for the grub screw to tighten up against. I just took mine apart yesterday and put it back together today.
Sorry for the sound of some clips. Have some problems with my microphone apparently. I tried to improve it in my edit program where it sounded good but on youtube it sounds too loud.
If you want my Biax Clone drawings, watch this video for a discount code >>> th-cam.com/video/mda_uz0fkqE/w-d-xo.html
I'm just guessing, but the mystery metal might be babbit or tin. But then again it could be something entirely different. I do the same thing with my machines if they aren't working exactly right I have to know shy and then get it fixed. I wish you luck. I'll be looking forward to the next video. KOKO!
@@jamesreed6121 I looked that babbit up, I didn't know that. but that could well be it. I just don't know yet how I can test it👍🏻
My Southbend 7 inch has a grub screw in the bottom of the rocker arm and a flat spot on the shaft for the grub screw to tighten up against. I just took mine apart yesterday and put it back together today.
@@terrycannon570 and that is why you must first look carefully at what there is to see/find. before swinging the hammer. thanks for your information👍🏻
That's very valuable information. Thank you very much. This will be very helpful.
@@Rustinox
no problem Michel, I enjoyed doing the research👍🏻
Check out my comment above about my Southbend 7 inch. You could damage yours if it has a grub screw.
Boy a lot going on there. Those chips had to work pretty hard to get way in there to the bearing.
@@hilltopmachineworks2131
I hope this metal got in through the previous one. who opened it. but I won't find out until I take those bearings out