AE2 Inscriber Automation
ฝัง
- เผยแพร่เมื่อ 18 พ.ย. 2018
- Automating the Inscriber from Applied Energistics is one of the very first things you'll want to do once you get some electronic storage going and it can be a little confusing at first. In this video, we'll show you exactly how to set this up starting with a very basic design, and work our way up to an advanced design that's super fast.
[AE2 VIDEO SERIES]
AE2 Part 1: Your First Network
• AE2 Tutorial - Part 1:...
AE2 Part 2: Intermediate Networking: Controllers, Channels, & Multi-parts
• AE2 Tutorial - Part 2:...
AE2 Part 3: Auto-Crafting
• AE2 Tutorial - Part 3:...
AE2 Part 4: P2P Tunnels and Advanced Networking
• AE2 Tutorial - Part 4:...
AE2 Part 5: Spatial Storage
• AE2 Tutorial - Part 5:...
AE2 Certus Quartz Growth Automation (1.19)
***COMING SOON***
Our Site - theMindCrafters.com
Live Chat - theMindCrafters.com/#chat
Twitch - / themindcrafters - เกม
One thing that I picked up from this video and the one about automated crystal growth is that the "Processing" patterns actually work in a pretty funny way. "Throw those resources inside of *this* block and then just wait for the desired outcome to appear in the system." This allows for much more complex autocrafting structures, than I initially thought was the limit of AE2.
You guys have the best tutorial videos, simple and easy to follow while still being understood and getting straight to the point! Would love to see more
After trying for two days, I gave up and searched for a video. This worked perfectly ..... still haven't figured out my mistake(s) but this saved my butt from endless hours of frustration!! Thanks :3
I went insane trying to find a good tutorial like yours thank you, it helped me a lot!
It's always good to see this kind of tutorial. But I would love to see one of these about Matter Overdrive mod. Would be cool. The Mindcrafters content is really well done.
Yeah I still want to see a really good one
It’s a really well made tutorial and it gave me some ideas for autocrafting. The level emitter setup is nice, but if you want a more compact alternative you can have a storage bus connected to an interface with a storage card and you can config the items and the amount of them in the “Config” part of the interface.
I needed ages to understand but yup ! Thx!
Nice and Simple, many thanks.
amazing guide 😎
A cool way i found to automate this process is to follow the same path on automating the printed processors with AE2 itself, but to actually assemble the processors i simply put a ME interface with the three processor crafting patterns in it and connect it to a chest, this chest then has 3 logistical sorters from Mekanism, each connected to a Quantum Entangloporter, the way it works is that the ingredients get sent to their respective entangloporters by being sorted by the logistical sorters, the entangloporters then are connected to three entangloporters that are connected to an inscriber, loading each ingredient from bottom, top and sides. After it completes the crafting it simply sends the processor back to the system, completing the crafting process.
I really enjoy your tutorial videos. Make me enjoy playing modded minecraft thanks :)
Thanks man it worked
in 1.16 at least, you can rotate the inscriber with the certus quartz wrench and pipe the resources in with hoppers on the top and sides, while another hopper pulls out the product from the bottom. Very useful video, and I really liked the compact setup you had here!
Love the applied energistics tutorials. It's my favorite modpack.
Alexander Lamberti AE2 itself is a mod, but usually run with lots of other side addons. The tutorials are great though. 👍
You can put the final press in a sub net and hook up storage busses to the three sides of it for its inputs. Then you place the crafting recepie for the processors in the interface leading to the sub net. Works and no chest, or another mod besides ae2.
Very helpful! Would've loved to see the detailed build for the 3x3 6:30
4:45 how is it using AE2 only if you are also using ender IO? That mod is not available for 1.16
Good vid keep it up
Would you be able to submit this world for download? I am a relatively new player to AE2 and I'd benefit greatly looking at a few things on your builds.
at 10min mark. Great set up but ! would be good to see it built to see what is connected to the inscribers and what configuartion they have!
Thank you so much
this video is so fucking good im in awe
At the end you have calculation with diamond and engineer with quartz,
The trouble with this concept is that it entirely depends on Ender IO filtering, which is dead for any version past 1.12.x. Think I'll learn the AE2 way instead.
good video! helped me figure out how to automate this without using a secondary mod (enderio for you). you can fully automate the inscribers with just AE2 (at least now in R6)
How did you manage to automate it with only AE2?
I would really like to now, do you have any kind of pictures from your setup?
@@Lazerbert-eu5yx 4 inscribers, 4 me terminals with crafting cards, 4 import busses and 6 export busses.
@@els236 I already found a other way with 5 inscribers, 5 ME interface, 5 import bus, 2 export bus and 1 crafting card.
@@Lazerbert-eu5yx interfaces is what I meant :p
@@Lazerbert-eu5yx 1 inscriber for silicon with an export bus for the redstone, then an interface with a pattern for 1 silicon equals one printed silicon. This same setup for the logic, calculation and engineering. Then the 5th inscriber (yes there are 5, my bad) with an export for redstone and printed silicon and then an interface with 4 patterns for the circuits.
Very good video but there is an issue in the "endgame" auto inscriber : if you put too many orders at once, the chest will be full, and the output wont reach the system, so be sure to place another chest for the output if you want to make those 16M cells
The last one is the one I always use its just way faster. I also use the level emitters but a little smarter. Also you can just stack 3 towers next to eachother I just cant remember how I did it.
Now its a bit late, but thanks a ton.
Can you make a tutorial that includes the AE2 Stuff mod?
nowadays AE2Stuff Mod is available on packs with AE2 as well which makes it alot easier.
True but it is the same basic setup only no side limmitation and it holds more
im always hesitate to use beta version mods tho i like to use there's once its stable
awesome tutorials... ever considered world downloads...? ;)
I can't craft multiple units with the 3rd design!
you can using filter
At the back inscriber which is making the processors it's taking a very long time to both insert and extract the items and I don't know why. Extracting takes a long time for all inscribers, but the back one also struggles with the insert. Any tips? I tried speed upgrades for the extracting conduits but doesn't seem to work.
Great tutorial but is there a way to do it without ender io pipes and just the ae2 cables system?
How am i suppose to give those inscriber power, specifically in that automation build using applied synergistic?
Edit: Your instruction is kinda confusing for some new people, you should show what you put in those ME interface as well.
your smart cables/fluix cables provide power and networking. one cable does it all!
you put the encoded patterns into the interfaces
They did an AE2 tutorial a while ago which is still pretty up to date. If you're confused check that one out. Sorry for 7mo late response.
Which version of MC are you working with here?
Ancient video but does anyone know how to make the little item labels he has on the inscribers?
How did you get the redstone in the middle of the inscribed on the final setup? I got everything else working except that.
I really don't understand how auto processing works in ae2, I tried making it but everytime the end result just remains stuck in the chest where I slap the interface on. Am I supposed to attach something else to it? maybe an importer or a storage bus too?
Great video, though silicone and silicon are quite different.
THANK you! Everyone gets that wrong! Silicon is processed sand and is used for computer chips, and silicone is caulking!
@@calebhouston5799 That's nice and all but when you're in construction and you go pronouncing things correctly they will all make fun of you.
@@WalkerRileyMC Not if I make fun of them first!
For some reason it's not making any presses. Is there a mod you used to set the circuits and redstone on the left side?
There’s a mod that adds better inscribers and a block that grows crystals
I set it up exactly as you have at 6 minutes and it kinda works. It'll start crafting stuff and pulls the first few items into the system but then stops and i have to manually move the products to the chest so it'll continue. Then the finished products stay in the chest and i have to move them back into the system manually. not sure what's going on.
Did you every figure this out? I just set this up and am having the same issue. If I craft the circuits one at a time it's fine but if I try to do them in bulk it will just stop for no reason.
@@Ramsus32 So I had the same issue - its putting a item filter for just the finished processors on the top ME interface - as I realised it was just sucking back uip all the resources into the system. So only whitelist the final ones going back IN to the system if that makes sense?
i tired the me setup but my crafing consol says its still grating the processors even after its delivered to the system?
Btw for people wanting to be a little smarter ;) use an interface and put in how manny of the item you want to stock and then put a storage bus on it so it pulls from the interface. A crafting card in the interface and you are done
i sadly do not have any of these item cables which is a very big pain
any way of doing the automation with ONLY AE2, instead of using other mods in the designs?
how do i configurate the terminals?
What mod allowed you to put the items up like a item frame without an item frame? I really like how you could put all three chips in one block space.
I'm guessing they are placed (default for me is P) on a block (dirt or what ever), that is then removed. Try it :)
Draconic evolutions
When i go back to the crafting terminal to craft something, no craftable items show up?? Also what do i put in the top interface??
Bit late but there is an option on the left to switch between showing craftable and just showing stored items (it may cycle thru some other options too)
everything works except i doesnt get any power
im trying to build it right now but for some reason no matter what i try it wont let me pull out the finished product out of any of them
To put the finished product back in the me system so the component can move on to the next step you need an import bus i believe. that's what worked for me at least.
i spend hours on getting this to work. and it just wont... It will make the prints but not send it off to the inscriber making the final product. silicon and redstone works fine tho...
at minute 6:27 the me interface above the inscribers, what is it for?
7:58 "This interface acts as an input for both the printed circuits and the finished processors".
Can any of these be done without using the Ender IO mod? Every setup shown requires Ender IO conduits
I use this setup
It sends instructions to print the silicon, but I never get the silicon to return to the ME Drive storage. What gives?
I never inspected the conduit in/outting to the interface!! The extract and input were flipped! Nevermind!
@@AceStarstream What do you mean exactly? I'm having the same problem.
@@darkphoenix7225 When I had placed the filters in the I/O Conduits, I set diamonds for output and the inscribed piece on the input. A simple mistake.
mine is not working, which way are each of the conduits facing on the automated processor build, the tall one
Have you figured it out? I'm working with enderio conduits for the first time lol trying to figure them out for these inscribers
@@griffinreddell9915 i have 4 regular presses set up standard and im just using an advanced press to do the processors, it was just easier that way, but i believe all the conduits are extracting since the interface panel is always inputting
advanced inscriber and standard inscribers rather*
Jesus
Fucking
Christ
Thank you dude
How did you do it that your items are stuck to the chest or other blocks so that you know which container contains which item?
What is this? A new intro? Liked the old one better ;)
the one and only thing that i find stupid in ae2 is that you cannot automate the crafting of anything that is made with the inscriber with the auto crafting OF AE2
Is it not easier to use advanced inscribers?
yes but thats not main ae2 thats an extra mod
@@kerzox oh didn't know sorry
This doesn't work for 1.7.10.
So how do u craft a mind???
its not putting the components in the chest 5:51
When you initiate the craft, what does your crafting monitor say? Is it waiting for parts? There's a chance that you also accidentally linked up the item pipes to a different inventory so the items actually are going into the chest but being pulled out and into the wrong machine.
@@TheMindCrafters the components are being made but they just stay in the inscribers, they dont move to the chest in the back
Or you could just put the AE2stuff mod into your pack and throw the building part of his tutorial out the window cause they are not fuzzy about which side to input, or output, or how many items can go in at once or in which slot... Or go with refined storage cause thats for people who want it easy. Me personally, i want Steve's factory manager back from 1.7 so i can do it that way.
Yuuu
I don't even know where I should plug this level emitter system it does make no sense at all can you explain a little better??? O.o
doesnt work
When ever i need help, i search for a Tutorial... Watch for like 2 Hours Videos... Come here and get my Answers + more "Good to know Stuff" in just 10 min...
will i ever learn just straight to look here ? :-/
Great visuals but you didn’t do a very good job at explaining some of the setups. The uncondensed AE one had me confused on some parts
Same here. I wish he went into greater detail as to how each individual piece should be setup and configured so we can learn. As it stands, my uncondensed AE one produces multiples of the printed pieces, but can only make a single finished processor per order or it breaks and hangs up indefinitely. Not sure why...but as someone new to AE, I bet I would understand better if the instructions in this tutorial were more thorough and less rushed, imho.
You guys should check out Undiscovered by super_fluke, its a very fun, semi-hard pack that doesn't get the love it deserves
It's pretty useless; you don't use export bus.
this was horrible i couldnt understand how to make any of the builds
Love how you skipped the part of how to make the silicon chip and so on =u=
inscriber + silicon press + anySilicon = silicon chip
WAYY too fast with the ME Network walkthrough.
great... crafting ae2 things using ender io... i dont have ender io on Regrowth pack. thanks for nothing!
Thanks for the tutorial (I guess) but you couldn't have done a worse job at explaining...
You litteraly don't explain shit of what goes to where