I didn't upgrade to Sonoma, just to Catalina. After updating Open Core patcher and "rooting", my progress bar would get stuck at around 15%-20%. Your procedure worked flawlessly. Thank you so much!
I have to say, between you and Mr. Mac, I give you guys a 10 out of 10 for knowledge and know-how. When a new ver of everything comes out I usually go ahead with the upgrade even if it trashes my system. I actually enjoy going through the repair procedure. My 2012 MBP is not my only MAC and I love keeping it "on the bleeding edge" 👍👍👍👍👍👍
Hi, after upgrading from 12.6.2 to 12.7.5, I do have the same problem as you with my 5,1. Which KDK Version did you choose? On github I can only find versions back until MacOS 13. Thank you very much in advance for your reply!
Thank you for this. I just upgraded to Sonoma on my 2102 MBP with no issues, from Ventura which was also unsupported. Nice to have this as a backup so I don't panic if it happens on subsequent upgraders. :)
Thanks for the video, to add, I need to use 1 additional command to fix the issue: ------launch recovery------- mount -uw "/Volumes/Macintosh HD" bless --mount "/Volumes/Macintosh HD" --bootefi --last-sealed-snapshot cd "/Volumes/Macintosh HD/Library/Extensions" && ls | grep -v "HighPoint*\|SoftRAID*" | xargs rm -rf reboot plug in a USB ethernet adapter, and run OCLP to install everything again. work like a charm.
Thank you. I was able to rescue my old 2013 MBP Retina (1st gen) after a failed OPLC update to 2.0. No more OPLC updates for me, the old 1.5.5 works just fine on this machine.
First of all, I want to thank you. I'm hardly a tech guy but your videos have helped me massively with updating my old macs including my 2010 Mac Pro 5,1 cheesgrater and all has been working well until last week with the Mac Pro. I saw this video months ago and then had this problem happen after a PRAM reset last week and it's been driving me nuts. Here's what happened: The problem started after I was prompted to install OCLP update 1.4.3 (from 1.4.1). It wouldn't start up so I reset the PRAM. Then I got the “no entry sign” on my OCLP Monterey 12.7.3 drive (NVMe) so I switched out my RX580 for the mac 5770 graphics card [so I could use the option key] and I removed all hard drives and connections. I did all the steps in this video and all seemed to be going well until it restarted. The progress bar appeared for a second and then said 'your computer restarted because of a problem. Press a key or wait a few seconds to continue starting up” and then it showed a progress bar but not moving. I shut it down after a few min, tried again and I got a gray screen with a flashing “?" (and shut itself off). Then I rebooted again holding option and selected EFI and I got the "your computer restarted because of a problem. Press a key or wait a few seconds to continue starting up." error again. Holding Shfit would not let it boot into Safe Mode either. Sounds like a Mac kernel panic issue like you said here, but I cannot find the KDK version for Monterey on GitHub to do the manual install. Maybe the EFI is corrupted? Maybe it’s an NVMe issue and I should try the repair on the backup SSD in a sled on bay 1 (although everything was working perfectly with the NVMe on a sonnet pci-e card)? I use this computer for music production and was able to go back and use Mojave (NVMe on sonnet card) for now to transfer old sessions to my laptop but I really love using Monterey on the Mac Pro because it has been very fast and stable and I can use the latest plugins and programs. Any advice on what I should do to fix this? I’ll keep searching through your video library for an answer. Thank you! 🙏🏼
Hi, NVMe might be the issue, I recommend having a small SSD with Monterey for backup reasons… but for the future there’s no need to update OCLP when still running Monterey - the new versions are meant for Sonoma updates
@@JessiesFlying Hi Jessie, thanks for the quick response. I took your advice and tried everything using the SSD this time, after doing the terminal I get the same results on restart, same "your computer restarted because of a problem. Press a key or wait a few seconds to continue starting up" error and then Apple logo with progress bar that does nothing, just freezes. As far as the 1.4.3 update, it keeps popping up which is why I went ahead to do that update. Is there a way to turn off those notifications if I can get this running again? I'm not sure if I can get this to work since I cannot seem to get neither nvme or ssd to start up. I've been searching for answers online for days and if you're not sure, sadly, it might be time to get a new computer. Thanks again for all your videos and advice! 🙏🏼
@@loslobosjr did you try NVRAM reset 3x in a row? There is a setting to switch off the check for new version or simply don’t allow the background process
@@JessiesFlying Hi Jessie, sorry for the late response, I was out of town and got back yesterday. Today I took out all the hard drives and peripherals on the pci-e slots. I installed the RX580 card and only the OCLP Monterey nvme on the sonnet pci-e card. I did a PRAM reset and let it go 3x this time (the other attempts I only did 2x) and it worked! Why does it work after 3x instead of 1x or 2x? I'll remember to do this again if I have the issue again. Thank you!
I’ve spent this last week trying to recover my 2014 iMac 27 “ after latest Sonoma update. Screen went white lost WiFi and second monitor. Have not tried this fix yet but this video gives me hope.
Wow, this works great on OCLP 1.4.3 that bricked my MacBook Pro and wouldn't log in afterward. Thank you for saving me a couple hours and reinstallation of osx :)
Firstly, thanks for the video. These kind of videos explaining things are invaluable. My issue, the latest OCLP 1.3.0, made my previously working MacBook Air on Venture (OPLC 1.2.1) hang on the progress bar, never finishing to boot. I could get into it Mac again with booting from Ventura install, and opening terminal. If I delete the kexts in /Volume//Library/Extensions (apart from Raid and HighPoint ones), I can get it to boot without root patches. I then re-downloaded the OCLP 1.2.1, and re-applied the patches. Still hangs on boot progress bar. So then tried your KDK download for 13.3.1 and re-applied root patch. Still hangs on boot progress bar. (I have internet access via wifi even without root patch btw). I cannot boot safe mode (holding shift), hangs in same place. So it seems that 1.3.0 OCLP breaks something, which I am sure will impact many others quickly. Still working on fixing it myself somehow, but looks like you may need to prep another video soon!! Any tips welcome.
@@JessiesFlying add me to this list. late 2012 Macbook Air stuck on progress bar and apple logo. was attempting to update to 14.2.1 from 14.1 and its stuck Anyone fix it?
FYI: rest in the comments: The OCLP 1.2.0 release a few days ago fixes this. this hack/trick is not needed any longer ;) The patcher now detects if you update your macOS via OTA update, and ask to download the correct KDK for your version
Hi, really good explanation, many thanks! Just one point to mention - when you were working in Terminal you called the quotation-mark “ a parenthesis, which is incorrect. A parenthesis is a curved bracket, like ( or ) .
Hi, you are really wonderful person indeed and you explained the all the procedure, installation procedure very in detail and I am very surprised. Its really wonderful and informative for me. Thank you very much. So nice of you.
8:13 I have multiple users on the iMac 5K 2017 and selectively boot from the Fusion drive for Sonoma 14.0 on EFI OCLP 1.0.1, or external T7 SSD for Sonoma 14.1. The Sonoma 14.1 on EFI OCLP 1.1.0 has not been stable after boot up, sometimes, it just stuck and t 8:13 he cursor didn’t move (with or without lightning cable), and/or the keyboard LED didn’t respond, a power button restart would be needed. A réinstallation of OCLP from the Installer or from the internal Fusion drive can solve the problem while burning my life for another half-an-hour. Eventually, it looks stabilised but every cold boot takes at least 15~20 minutes to successful logged-in to a user with admin rights. It’s so unstable and I’m not sure the imac will work after the next power off. So, I’ve decided to wait for OCLP 1.1.x or 1.2.x for Sonoma 14.1.x for other unsupported Macs.😅
Great video again that helps to understand the whole background better...thanks for your time and awesome support, Jessie. Is there a simple way to check what's the latest KDKs on a machine?
Great video, thanks. I acted accordingly and it works. One remark about those Mac which do not have an ethernet connector. I used a USB-Ethernet adapter for my MBA13 2015 and everything went smoothly.
To the guys that have problems installing the root patches with Open Legacy Core, you don't install the latest version of OpenLegacy Core if your model is not mentioned, because it causes stuck on boot. Follow the suggestion of Jessie when he talks about install KDK of your version. After that, install the previous version of OpenLegacy Core (the correct for me was 1.2.0), and root patch again. It will work again. We need to wait the next version of OpenLegacy Core when it will be compatible for our model. Then we can install the MacOs update. Hope it helps. Update: follow this Jessie's video th-cam.com/video/cLAX7zGAUig/w-d-xo.html that explain how to install Mac Os 14.2.1 using the correct KDK
yeps, same for me on an older macbook pro 15 inch: follow the instructions to revert back to the last snapshot, then reinstall the older legacy patcher (for me the 1.2.1), then patch the root and all is fine again.
You saved my day twice sir! Good details for the explanation and the logic flow is like the old days, no watering words and waste of time. Thank you and your work is much appreciated.
Hi, I recently upgraded to OpenCore Legacy Patcher 1.0.2 on Sonoma 14.0. However, after rebooting, I see the Macintosh HD logo, but then the screen stays black without any further actions. Do you have any solutions or suggestions? I would greatly appreciate your help.
Thanks again Jessie! It works too if you are stuck in login screen. AND After bless the mount in terminal and clica restart, press SHIFT to boot in safe mode and dont get stuck in bar progress to!
@@JessiesFlying It's actually still crashing on the login screen. After entering your username and password, it keeps loading forever and nothing happens. I'm on Sonoma 14.5 and Opencore Legacy 1.4.3 😔
@@JessiesFlying Hi Jessie, I was going to try but I saw that OCLP 1.5.0 is for the kernel debug kit version 14.6.1 and I'm on 14.5 and my OS didn't show up to update. I don't know how to proceed 😅
Hi Sir, i tried following your given steps for but after hitting space button and choosing Sonoma 14.4, the language selection not coming.. It going completely blank.. Please help.. Neighther wifi not usb is working.. There is no way i can update the KDK or open patcher.
Great video Thank You Jessie, I always wait on this updates due to this kind of things, thank you for being on top of the situation and helping everyone out.
Hi again! Quick update I got in to the OS after looking at the dortania page it has two dashes on the Terminal command at this place “-bootefi” not one dash as on here, but it worked for your demo I have no idea why it made a difference for me!! So now I’m back in and just have the rest of your instructions to follow to hopefully get WiFi back👍 (Opencore version 1.4.2)
I would like thank you for this solutions and pointing the problem. I have 2013 iMac 27”, and two times updated with IOS Sonoma 14.3 after restart got the black screen with apple support text even wouldn’t go to recovery mode.lib was very disappointed because spent so much time to bring the iMac to iOS Ventura. Thank you so Much now I can try again and follow your instructions. Second comment: Finally after watching your videos I was able to install Sonoma 14.3 to my 2013 iMac 27” and learned why the installation was unsuccessful. Thanks to you, Mr. Macintosh and the OCL developers to keep our unsupported Mac a live and running.
NOW I updated my iMac 27' end 2015 and MBP mid 2015 with the yesterday evening published OCLP 1.2.0 to Sonoma 14.1. After installation I was not able to login because the system was very, very slow. On both machines..I can't type in my password. This was possible after a switch off/on restart and installation of the OCLP root patches from OCLP 1.2.0. Now all is fine. Many thanks to all developers.
Now the update to Sonoma 14.1.1 just one day later. Using OCLP 1.2.0 with the same outcome as before. After restart and root patch installation my MBP mid 2015 all works fine as aspected. Not installed on my IMac end 2015 because this is my production system. Will wait for next instructions and not take the potential risk. Obviously OCLP 1.2.0 did not install root patches automatically. Maybe it’s a doddle but I’m not sure what else comes out… meanwhile got the iMac end 2015 his update as well. The only issue was that Norton 360 has to be re installed. Rest is flawless.
@JessiesFlying YOU ARE GREAT!!!! I followed mr macintosh tutorial 1..2..3..40 times but always failed. maybe it bothered him to do things DONE RIGHT like you did. thanks man!
Damn near a superman of apple software related issues, this is the second time watch this it saved my work computer when I updated with I wasn't on WiFi so root patches weren't installed Now saving my brother's Mac he updated without installing the latest opencore... I can approve both macs have been saved 2014 & 2011
Hello, I’m experiencing some issues with my MacBook Pro (Early 2015, 13-inch) running Sonoma 14.3.1. Here’s what’s happening: I need to press Option + R to access the screen where I can view the EFI and SSD. To access the Sonoma Recovery, I have to press CTRL + Space. I follow the provided steps until I need to restart the system. Upon restarting, I press the Option key to view the icon. However, my MacBook only starts up to one-third of the way on the progress bar and then hangs. Unfortunately, these steps aren’t working for me. Any assistance would be greatly appreciated.
Got the invite for upgrade to OCLP 1.2.0 this morning and went for it. Roulette style as no videos out yet about that new version of OLCP. Black screen after patching. Was running Sonoma 14.1 on midyear 2011 i mac before. Plugged in the ethernet cable, restarted and boom, no problem booting. All functions came back and could unplug the ethernet.
The problem now is, upon installing root patches and restarting, it got stuck again and I had to repeat the whole procedure. 3 times now… Do I have to install the KDK for my system (Ventura 13.6.6)? The problem there is that the latest Ventura version is 13.6.5. Will that work for 13.6.6? Thank you!!!
Hi Jessie: just found your channel! Great vids! So, if you maybe looking for video topics… I have a MacPro 3,1 running DosDude1 Catalina. I’m thinking to move to OpenCore and a newer OS. So one video of interest would be exploring just how old one can go with OpenCore. But another question and idea relates to getting many multi monitors working on an old MacPro. One of the reasons I bought this MacPro back in the day was the advertisement that it could host up to 8 monitors with the then decent ATI Radion cards that came with it. 4 cards, 2 DVI ports each 4 PCI slots, 8 monitors. My question is how to do that today with a new OS in these old MacPros. I have a GTX680 that has 2 DVI, 1 HDMI, 1 Display Port. In my DosDude1 Catalina 3,1 MacPro I have not been able to more than 1 DVI and 1 HDMI working. Nothing I do seems to bring either the 2nd DVI or the Display Port to life (even if I don’t connect the first DVI or HDMI). Maybe those two latter 2 ports are broken? I have no way to tell. Are the PCI slots limited to 2 monitors? Reason I ask is that one of the Apple approved Metal cards is a single width board with 4 ports (don’t recall which kind they are, maybe Display Port), but if the PCI slot only allows 2 monitors, that would not help. So bottom line, the idea for the video would be how to connect 8 monitors up to an old Mac Pro with a new OS using OpenCore. ;-). Thanks!
Hi, that’s a quite special topic and depends heavy on the graphic cards and the reimplementation of the old drivers into the macOS. Maybe ask on Discord if anyone has tested something like that already?
My experience with an iMac 12.1 is that only a clean install (of Big Sur in my case ) works well with Open Core Patcher Post Install Root patches! But it won't Boot normally. Always starts with the Big Sur install....
Awesome as always JEssie. right now i am battling my mac pro 3.1 and sonoma 14 beta. and i have at least two problem children; I have both Asus GTX 1060 AND ATI Radeon HD 5770 installed in this mac. and its boots. but the GPU acceleration is bad as hell atm… I suspect the nvidia web drivers root patched ASWELL as Terascale drivers in the same operation (oclp 1.1.0. having anoither crack at it tomorrow
Mac 2015 with Sonoma 14.2 Installing KDK 14.2 and 14.4 manually didn't work, even resetting NVRAM. I did my research and I noticed that while doing the root patch, is not fetching any KDK thats already installed. Actually, when you install a KDK it should be placed on Library/Developer/KDKs, but that folder is not even created on my Mac. It's worth to mention that have to boot on Safe mode. Any idea?
I've gone through the entire procedure repeatedly for Sonoma 14.1.1, using various versions of OpenCore, yet nothing appears to succeed. I always end up getting stuck at the boot bar. Also I am on MacBook Pro 2016.
Check out my latest video, there is Sonoma 14.4 on MBP 2016 updated from Monterey macOS 14.4 tested on ALL UNSUPPORTED MACs with OpenCore Legacy Patcher 1.4.1! th-cam.com/video/KwMCiZ3iQH8/w-d-xo.html
Crazy thing is that the very same thing happened to my fully supported MBP 16 M1 Pro…updated from 13.6.0 to 13.6.1 and boom!….bricked. You need another Mac (that I didn’t have) to revive the SMC and have the Recovery partition re-installed from another Mac with Apple Configurator open (Genius Bar stuff)….basically…wiping the old partition schema and re-initialising my Mac. Hence, you have more options on a Hackintosh and unsupported Macs rather than a fully supported Mac! That’s been too much even for an Apple fanboy like me: I’ve traded-in my Mac, got some good cash for future iPhone upgrades and now I’m finally out of this madness. Linux forever.
I gave up. A recent update had my main work laptop stuck for the weekend. I then tried recovering everything thru time machine. That didn't work. So I erased everything and stated fresh with ventura which is the latest OS my laptop supports. I did love Sonoma but I dont want to walk on eggshells on my work stations. I'll just use the last compatible Ones from now on and avoid the hellish three days of frustration I just went thru installing everything again that I need for work. If I was as knowledgeable as some of these dudes here on TH-cam and was absolutely sure I could get myself out of every hiccup with every update I would definitely continue running unsupported. But this past weekend has just proved to me the importance of ONLY running unsupported Ones on machines that are NOT mission critical!!
Sadly didn’t work for me. Did everything like you said did the steps in the terminal - MacBook Air still gets stuck at around 40% in the progress bar during booting.
Thanks a lot @Jessie! I was struggling with my iMac not working for about a month because of this problem! Althought I got my iMac 2011 "27 running now, I decided to install Monterey because it was working great before I updated it to Sonoma which works temporarily good. The problem I'm facing is that once OCLP 1.5 & Latest Monterey are installed, I am not being able to boot into the iMac after I root patch using an Ethernet. When I try downloading KDK manually even thought I am connected to an ethernet, I noticed there is no 12.7.6 KDK. DO you have any suggestions? Thanks a lot for the great content on your channel!
hello jess, thanks in advance for all your videos ... it helps a lot!!!! I am stuck in 1/3 apple logo, I currently using a imac 14.1 (late 2013) everything was fine until I hit update to Sonoma .... after that I got stuck always.... then I was able to boot on safe mode and installed again Sonoma Version 14.5 23F79 and installed Kernel Debug Kit 14.5 build 23F79, always in safe mode and using OCLP version 1.1 ... I reboot and still 1/3...Apple Logo.... dont know what else to do !!!!! any hgelp will be appreciatted
4:22 A black screen appears because the Recovery 14.1.1 (with a golden system settings icon) doesn’t work from an external SSD on MacbookPro13,2 (Late 2016,13”). The internal SSD is running OCLP 1.2.1 & Sonoma 14.0. KDK 14.0, 14.1 and 14.1.1 were downloaded to the Download folder in both internal and external SSD, and KDK 14.1.1 was run before OCLP 1.2.1 was Build and Install OpenCore to install on a USB Sonoma Installer 14.1.1. The Sonoma 14.1.1 was downloaded from from OCLP 1.2.1. Internet connected via a Ethernet-USB-C adapter and Wi-Fi connected before choosing EFI (tried all 3: EFI Sonoma Installer 14.1.1, external SSD 14.1.1 and internal SSD 14.0). Tried Reset NVRAM. The same procedure works well on a Mac Mini 6,2. What’s the problem and how to overcome?
@@JessiesFlying Finally MBP13,2 can startup from internal SSD on macOS Sonoma 14.2 with OCLP 1.3.0. To make it happen, I needed to use Internet Recovery to reformat the Internal SSD choosing mac OS Extended (Journaled) because of no APFS, (but failed to reinstall macOS Sierra!), then install macOS Ventura from an Installer USB thumb drive with OCLP 1.3.0. (Now the SSD is formatted into APFS. After macOS Venture started up, install OCLP 1.3.0 to the internal SSD, then go to System Settings > General > Software Update to install macOS Sonoma 14.2, and then use Migration Assistant to transfer the user accounts from the external Startup SSD to the Internal SSD. No KDK was involved during the process. Touch Bar works perfect. Next step on plan: to rescue the external SSD, which fails to startup after failed to update macOS Sonoma to 14.2 from 14.1.2.
Hi Jessie, around 3:40 in your video, when you say keep the CTRL pressed on EFI boot and then what? you go to another screen but don't say what did you do after keeping the CTRL key pressed. When I press the ctrl key the icon changes to circle but when I lift my finger it changes back to an arrow. Can you please specify what exactly do I do while keep pressing the CTRL key. Thanks.
I’ve tried EVERYTHING (followed all your videos) but I still cannot access WiFi 😫 Root patching fails to install Graphics, Networking, and FaceTime camera…..“ unable to build new kernel cache. Reason for patch failure (71) no variant specified falling back to release…..etc” I guess at least I can still utilize my 2013 MacBook Air with updated Sonoma tethered to an Ethernet cable 😒
I just tried to solve my problem using the instructions from this video. It worked until the commands on terminal, but after that I'm still getting stuck on the Apple logo screen with the progress bar almost in the half
@@JessiesFlying, it doesn't work either. I tried to follow your instructions from one of your other videos talking about safe mode, but it didn't work either. I decided to install Catalina on my old Macbook Pro 2011 instead
I'm getting stuck at the mounting point. My drive is called Macintosh HD and I do the bless part but I still get nothing. I'm on a Macbook Pro 2011 17 inch. It booted once but now for some reason it's won't boot. I'm not sure I even ran the root patches in the first place. I'm using the 1.5.0 OpenCore Patcher.
I have Sonoma in my Mac book air 2017 and my Mac Pro 2010 no issue for now, everything working good thanks for OCPL Pro. next is my Mac mini 2010. saludes ciao,
Everything on my 2013 macbook is working fine. I’m on sonoma 14.5. All root patching is done. My laptop doesn’t have audio. Please assist in solving this please
@@JessiesFlying Hi Jessie, I clicked on the Discord link above trying to accept the invitation but got the message "Safari cannot open the page because the address is invalid.".
Hi, Unfortunately this didn't work for me. Mac mini 2012 i7, OCLP 1.2.1 Still stuck progress bar 40% May just have to create new partition, install Sonoma and get in that way, or wipe and start over
Hi@@JessiesFlying , Thanks, yes I had seen that video also, but sadly nothing worked. I've had this experience with both the Mac mini 2012 and also on my 2012 MacBook Air. In the end I wiped both and reinstalled Catalina and will stay with that. Neither are my main devices so they were relatively safe to play around with. Thanks for the videos and all your help.
Thanks for the video. Machine updated itself to Sonoma and was working OK but had no drivers. I dloaded the latest open patcher and loaded the drivers. It asked to update the local open patcher if I remember correctly and from here I reach your stuck screen. I followed your steps and after clicking recovery, screen just remains blank.
@@JessiesFlying i did it it logged in by the safe mode once then i patched it and clicked on reboot and it’s again stuck ,now while pressing the shift the safe mode dosent come up
macOS Sonoma, in my case was stuck at the very tip of the bar and after following this steps until you boot the last sealed macos version is stuck know but at the middle of the bar! What I do now?
hi, will there be a new OCLP 1.1.x or 1.x.x to have all these issues resolved? so there is no need to go through all these copying and update... cheers,
Mines is stuck at the last progress bar. It boots for the last time then it gets stuck at the progress bar and it doesn’t even make it halfway through the bar
hey there, when i get to the stage where i input the text into the terminal to bless the mount, i get the message “volume could not be mounted: No such file or directory /sbin/mount_apfs returned non-0 exit status Couldn’t bless the APFS pre boot volume for volume mounted at /Volumes/Mac HD: No such process”. I have checked that the commands i entered are the ones in your video with my own directory and they definitely are. What can I do?
Hello Jessie, unfortunately i saw you video too late 😢. When i'm in de apple boot menu and press de control key. the icon changes, but after clicking on the efi logo the imac restarts and i do not get in the next menu as seen in your video. Any tips?
thank you for the video! Question: for every update, it seems that a manual udpate and download of the corresponding KDK is a must. However which should be done first, download to one's computer the KDK or the apple software update? THANKS!
When you download the update the legacy player should download appropriate KDK automatically if needed. After every update another root patch is necessary and then the (maybe) needed KDK is already installed
I'm on 1.2.0 and I left the installer running after the KDK downloader started, but I think there must have been an error downloading the KDK, the install of 14.1.1 went fine, but then I stupidly ran the post install with 14.0 KDK. I'm on a 16,1 iMac, and recovery isnt even booting. I've tried creating a boot disk on another Mac and I can get to terminal in order to try the blessing of the hard drive but I'm just greeted with a blank screen again. Safe mode doesn't seem to work. I've even tried re-installing but I get an error -69716 Storage system verify or repair failed. Very stuck.
I didn't upgrade to Sonoma, just to Catalina. After updating Open Core patcher and "rooting", my progress bar would get stuck at around 15%-20%. Your procedure worked flawlessly. Thank you so much!
I have to say, between you and Mr. Mac, I give you guys a 10 out of 10 for knowledge and know-how. When a new ver of everything comes out I usually go ahead with the upgrade even if it trashes my system. I actually enjoy going through the repair procedure. My 2012 MBP is not my only MAC and I love keeping it "on the bleeding edge" 👍👍👍👍👍👍
🤣
Exactly; that’s part of the game, isn’t it?😜As long as the trashed system is not your daily driver…
@@JessiesFlying why can’t you just take kda from a supported Mac if you know we’re it is in the actual supported Mac
@@NicVandEmZ I don't understand that question...
We are the 5.1 kamekazes!
JESSIE FOR THE WINNNNNNNNNN. had this issue on my 5,1.. its fixed now thanks to this video😃
How did you get it fixed? I have update d a iMac 2013 to Ventura, and never boots up just stuck on the boot loader?
@@TheLondonguy so none of my tips of the last 2 videos help?
Hi, after upgrading from 12.6.2 to 12.7.5, I do have the same problem as you with my 5,1. Which KDK Version did you choose? On github I can only find versions back until MacOS 13. Thank you very much in advance for your reply!
Thank you for this. I just upgraded to Sonoma on my 2102 MBP with no issues, from Ventura which was also unsupported. Nice to have this as a backup so I don't panic if it happens on subsequent upgraders. :)
@@dougww1ectebow 👍🚀
Thanks for the video, to add, I need to use 1 additional command to fix the issue:
------launch recovery-------
mount -uw "/Volumes/Macintosh HD"
bless --mount "/Volumes/Macintosh HD" --bootefi --last-sealed-snapshot
cd "/Volumes/Macintosh HD/Library/Extensions" && ls | grep -v "HighPoint*\|SoftRAID*" | xargs rm -rf
reboot
plug in a USB ethernet adapter, and run OCLP to install everything again.
work like a charm.
👍
charm for real👌
Thank you. I was able to rescue my old 2013 MBP Retina (1st gen) after a failed OPLC update to 2.0. No more OPLC updates for me, the old 1.5.5 works just fine on this machine.
First of all, I want to thank you. I'm hardly a tech guy but your videos have helped me massively with updating my old macs including my 2010 Mac Pro 5,1 cheesgrater and all has been working well until last week with the Mac Pro. I saw this video months ago and then had this problem happen after a PRAM reset last week and it's been driving me nuts. Here's what happened:
The problem started after I was prompted to install OCLP update 1.4.3 (from 1.4.1). It wouldn't start up so I reset the PRAM. Then I got the “no entry sign” on my OCLP Monterey 12.7.3 drive (NVMe) so I switched out my RX580 for the mac 5770 graphics card [so I could use the option key] and I removed all hard drives and connections. I did all the steps in this video and all seemed to be going well until it restarted. The progress bar appeared for a second and then said 'your computer restarted because of a problem. Press a key or wait a few seconds to continue starting up” and then it showed a progress bar but not moving. I shut it down after a few min, tried again and I got a gray screen with a flashing “?" (and shut itself off). Then I rebooted again holding option and selected EFI and I got the "your computer restarted because of a problem. Press a key or wait a few seconds to continue starting up." error again. Holding Shfit would not let it boot into Safe Mode either. Sounds like a Mac kernel panic issue like you said here, but I cannot find the KDK version for Monterey on GitHub to do the manual install.
Maybe the EFI is corrupted? Maybe it’s an NVMe issue and I should try the repair on the backup SSD in a sled on bay 1 (although everything was working perfectly with the NVMe on a sonnet pci-e card)? I use this computer for music production and was able to go back and use Mojave (NVMe on sonnet card) for now to transfer old sessions to my laptop but I really love using Monterey on the Mac Pro because it has been very fast and stable and I can use the latest plugins and programs.
Any advice on what I should do to fix this? I’ll keep searching through your video library for an answer. Thank you! 🙏🏼
Hi, NVMe might be the issue, I recommend having a small SSD with Monterey for backup reasons… but for the future there’s no need to update OCLP when still running Monterey - the new versions are meant for Sonoma updates
@@JessiesFlying Hi Jessie, thanks for the quick response. I took your advice and tried everything using the SSD this time, after doing the terminal I get the same results on restart, same "your computer restarted because of a problem. Press a key or wait a few seconds to continue starting up" error and then Apple logo with progress bar that does nothing, just freezes. As far as the 1.4.3 update, it keeps popping up which is why I went ahead to do that update. Is there a way to turn off those notifications if I can get this running again? I'm not sure if I can get this to work since I cannot seem to get neither nvme or ssd to start up. I've been searching for answers online for days and if you're not sure, sadly, it might be time to get a new computer. Thanks again for all your videos and advice! 🙏🏼
@@loslobosjr did you try NVRAM reset 3x in a row? There is a setting to switch off the check for new version or simply don’t allow the background process
@@JessiesFlying Hi Jessie, sorry for the late response, I was out of town and got back yesterday. Today I took out all the hard drives and peripherals on the pci-e slots. I installed the RX580 card and only the OCLP Monterey nvme on the sonnet pci-e card. I did a PRAM reset and let it go 3x this time (the other attempts I only did 2x) and it worked! Why does it work after 3x instead of 1x or 2x? I'll remember to do this again if I have the issue again. Thank you!
@@loslobosjr might remain a secret to everyone…. 😬
a guy who does not just upload anything for viewes, a true helpful video, thanks
@@alirezanasibi9695 ☺️ sharing nevertheless appreciated
Commands used in this video totally saved my rest of the year. Thank you!
Great! 🚀
Thank you! I was completely lost until I watched your video. You gave every detail and talked me right through it.
Great to hear! 😊
Thank you so much this video just saved me, ran into the issue updating to Sonoma 14.4.
👍
I’ve spent this last week trying to recover my 2014 iMac 27 “ after latest Sonoma update. Screen went white lost WiFi and second monitor. Have not tried this fix yet but this video gives me hope.
keep me posted if it worked
Thanks a lot for the detailed step by step explanation… really great! 👍
Wow, this works great on OCLP 1.4.3 that bricked my MacBook Pro and wouldn't log in afterward. Thank you for saving me a couple hours and reinstallation of osx :)
Firstly, thanks for the video. These kind of videos explaining things are invaluable.
My issue, the latest OCLP 1.3.0, made my previously working MacBook Air on Venture (OPLC 1.2.1) hang on the progress bar, never finishing to boot.
I could get into it Mac again with booting from Ventura install, and opening terminal.
If I delete the kexts in /Volume//Library/Extensions (apart from Raid and HighPoint ones), I can get it to boot without root patches.
I then re-downloaded the OCLP 1.2.1, and re-applied the patches. Still hangs on boot progress bar.
So then tried your KDK download for 13.3.1 and re-applied root patch. Still hangs on boot progress bar. (I have internet access via wifi even without root patch btw).
I cannot boot safe mode (holding shift), hangs in same place.
So it seems that 1.3.0 OCLP breaks something, which I am sure will impact many others quickly.
Still working on fixing it myself somehow, but looks like you may need to prep another video soon!!
Any tips welcome.
I'm struggling with the exact same issue on a 2013 iMac (14,1) running Ventura 13.6.1. Please reply with an update if you find a fix. Thanks!
I have the same problem on a MacBook Pro late 2012 Ventura 13.6.1. I can not get into recovery or use safe mode.
That’s weird, I didn’t experience any problems yet during testing. Did you just install OpenCore or also the root patch? Did you boot in between?
@@JessiesFlying add me to this list. late 2012 Macbook Air stuck on progress bar and apple logo. was attempting to update to 14.2.1 from 14.1 and its stuck Anyone fix it?
@@beeradfpv try safe mode as shown here: th-cam.com/video/VdbqINJDHLM/w-d-xo.html
This is an example of parentheses ( ).
This is an example of quotation marks ".
Good show thank you for the information.
you're absolutely right.... I'm still German ;-)
Simply the best. Full of knowledge. Thanks for sharing.
FYI: rest in the comments: The OCLP 1.2.0 release a few days ago fixes this. this hack/trick is not needed any longer ;) The patcher now detects if you update your macOS via OTA update, and ask to download the correct KDK for your version
I know but I just had an issue where it still caused exactly this issue…
Thank you so much!!! I was stuck on apple logo 14.3.1 iMac 27" mid 2011. You are the one! Awesome work.
☺️
Hi, really good explanation, many thanks!
Just one point to mention - when you were working in Terminal you called the quotation-mark “ a parenthesis, which is incorrect. A parenthesis is a curved bracket, like ( or ) .
you're absolutely right... I'm still German ;-)
Hi, you are really wonderful person indeed and you explained the all the procedure, installation procedure very in detail and I am very surprised. Its really wonderful and informative for me. Thank you very much. So nice of you.
😊
8:13 I have multiple users on the iMac 5K 2017 and selectively boot from the Fusion drive for Sonoma 14.0 on EFI OCLP 1.0.1, or external T7 SSD for Sonoma 14.1. The Sonoma 14.1 on EFI OCLP 1.1.0 has not been stable after boot up, sometimes, it just stuck and t 8:13 he cursor didn’t move (with or without lightning cable), and/or the keyboard LED didn’t respond, a power button restart would be needed. A réinstallation of OCLP from the Installer or from the internal Fusion drive can solve the problem while burning my life for another half-an-hour. Eventually, it looks stabilised but every cold boot takes at least 15~20 minutes to successful logged-in to a user with admin rights. It’s so unstable and I’m not sure the imac will work after the next power off. So, I’ve decided to wait for OCLP 1.1.x or 1.2.x for Sonoma 14.1.x for other unsupported Macs.😅
I only have greetings for this highly usefull video. Many many many thanks, you've saved my Old Friend form 2012.
😊👍
Great video again that helps to understand the whole background better...thanks for your time and awesome support, Jessie. Is there a simple way to check what's the latest KDKs on a machine?
go to /Library/developer/KDK and check folder name
@@JessiesFlying Ah ha! Thank you! I was unsure which specific KDK 13.3 build to download as there are multiple.
Your channel deserves a million subscribers. Thank you for all you do.
That’s right - share the word! 😬🚀
1:57 Also, no bluetooth. Thus, the keyboard and the magic touch pad need lighting cable attached.
yes, as the drivers are not being loaded
Thank you so much! Managed to get my MB Pro 2012 working again with the help of your video!
🚀
Great video, thanks. I acted accordingly and it works. One remark about those Mac which do not have an ethernet connector. I used a USB-Ethernet adapter for my MBA13 2015 and everything went smoothly.
thx for the info!
You are great at this! Thank you for sharing your knowledge and help in such an understandable and easy-to-follow manner. Kudos to you!
😊
To the guys that have problems installing the root patches with Open Legacy Core, you don't install the latest version of OpenLegacy Core if your model is not mentioned, because it causes stuck on boot. Follow the suggestion of Jessie when he talks about install KDK of your version. After that, install the previous version of OpenLegacy Core (the correct for me was 1.2.0), and root patch again. It will work again.
We need to wait the next version of OpenLegacy Core when it will be compatible for our model. Then we can install the MacOs update. Hope it helps.
Update: follow this Jessie's video th-cam.com/video/cLAX7zGAUig/w-d-xo.html that explain how to install Mac Os 14.2.1 using the correct KDK
Thx for explaining!
yeps, same for me on an older macbook pro 15 inch: follow the instructions to revert back to the last snapshot, then reinstall the older legacy patcher (for me the 1.2.1), then patch the root and all is fine again.
Damn, that's my case, I will try this solution!!
Thank you sooo much this helped a lot
You saved my day twice sir! Good details for the explanation and the logic flow is like the old days, no watering words and waste of time. Thank you and your work is much appreciated.
Sharing appreciated 😬
Hi, I recently upgraded to OpenCore Legacy Patcher 1.0.2 on Sonoma 14.0. However, after rebooting, I see the Macintosh HD logo, but then the screen stays black without any further actions. Do you have any solutions or suggestions? I would greatly appreciate your help.
Please no double posts
Thanks again Jessie! It works too if you are stuck in login screen. AND After bless the mount in terminal and clica restart, press SHIFT to boot in safe mode and dont get stuck in bar progress to!
@@guillermemathaeus 👍🚀
@@JessiesFlying It's actually still crashing on the login screen. After entering your username and password, it keeps loading forever and nothing happens. I'm on Sonoma 14.5 and Opencore Legacy 1.4.3 😔
@@guillermemathaeus maybe try OCLP 1.5.0…?
@@JessiesFlying Hi Jessie, I was going to try but I saw that OCLP 1.5.0 is for the kernel debug kit version 14.6.1 and I'm on 14.5 and my OS didn't show up to update. I don't know how to proceed 😅
@@guillermemathaeus you can use latest OCLP for all macOS versions from Big Sur on… 👍
Hi Sir, i tried following your given steps for but after hitting space button and choosing Sonoma 14.4, the language selection not coming.. It going completely blank.. Please help.. Neighther wifi not usb is working.. There is no way i can update the KDK or open patcher.
Did you try booting in safe mode already?
@@JessiesFlying it is opening in the safe mode. Showing sonoma 14.4.1..
But wifi or network related hardware not responding.
@@avisurana1 did you try NVRAM reset?
@@JessiesFlying hi Sir, can you please guide me how to do the NVRAM reset. I am a finance guy and doesn’t know much about it.
Great video Thank You Jessie, I always wait on this updates due to this kind of things, thank you for being on top of the situation and helping everyone out.
you're welcome!
Hi again! Quick update I got in to the OS after looking at the dortania page it has two dashes on the Terminal command at this place “-bootefi” not one dash as on here, but it worked for your demo I have no idea why it made a difference for me!! So now I’m back in and just have the rest of your instructions to follow to hopefully get WiFi back👍 (Opencore version 1.4.2)
Join my Discord for Questions & Answers: discord.gg/rAhpJNqaKS
Safari can’t open the page: “the address is not correct”.
@@CeesTax here with Chrome it works... anyone else the same problem?
@@JessiesFlying I downloaded the app Discord and now it works. Thanks.
I would like thank you for this solutions and pointing the problem.
I have 2013 iMac 27”, and two times updated with IOS Sonoma 14.3 after restart got the black screen with apple support text even wouldn’t go to recovery mode.lib was very disappointed because spent so much time to bring the iMac to iOS Ventura.
Thank you so Much now I can try again and follow your instructions.
Second comment: Finally after watching your videos I was able to install Sonoma 14.3 to my 2013 iMac 27” and learned why the installation was unsuccessful. Thanks to you, Mr. Macintosh and the OCL developers to keep our unsupported Mac a live and running.
Could you explain how you did it? I cant get past the recovery, after choosing recovery, i get stuck on the apple logo
NOW I updated my iMac 27' end 2015 and MBP mid 2015 with the yesterday evening published OCLP 1.2.0 to Sonoma 14.1. After installation I was not able to login because the system was very, very slow. On both machines..I can't type in my password. This was possible after a switch off/on restart and installation of the OCLP root patches from OCLP 1.2.0. Now all is fine. Many thanks to all developers.
👍
Now the update to Sonoma 14.1.1 just one day later. Using OCLP 1.2.0 with the same outcome as before. After restart and root patch installation my MBP mid 2015 all works fine as aspected. Not installed on my IMac end 2015 because this is my production system. Will wait for next instructions and not take the potential risk. Obviously OCLP 1.2.0 did not install root patches automatically. Maybe it’s a doddle but I’m not sure what else comes out…
meanwhile got the iMac end 2015 his update as well. The only issue was that Norton 360 has to be re installed. Rest is flawless.
Thank you. You are a GREAT teacher and I RESPECT your intelligence! Wow!
😊
@JessiesFlying YOU ARE GREAT!!!! I followed mr macintosh tutorial 1..2..3..40 times but always failed. maybe it bothered him to do things DONE RIGHT like you did. thanks man!
thanks, you're welcome! I don't think Mr. Macintosh was aware of the differences in the Volume naming - maybe give him a hint to my video? ;-)
@@JessiesFlying i already did it 😉
Help me a lot! Thank you from Brazil
Damn near a superman of apple software related issues, this is the second time watch this it saved my work computer when I updated with I wasn't on WiFi so root patches weren't installed
Now saving my brother's Mac he updated without installing the latest opencore...
I can approve both macs have been saved 2014 & 2011
great to hear!
Hello, I’m experiencing some issues with my MacBook Pro (Early 2015, 13-inch) running Sonoma 14.3.1. Here’s what’s happening:
I need to press Option + R to access the screen where I can view the EFI and SSD.
To access the Sonoma Recovery, I have to press CTRL + Space.
I follow the provided steps until I need to restart the system.
Upon restarting, I press the Option key to view the icon.
However, my MacBook only starts up to one-third of the way on the progress bar and then hangs.
Unfortunately, these steps aren’t working for me. Any assistance would be greatly appreciated.
Try safe mode (keep shift pressed when selecting macOS) if the progress bar hangs at around 1/3….
Got the invite for upgrade to OCLP 1.2.0 this morning and went for it. Roulette style as no videos out yet about that new version of OLCP. Black screen after patching. Was running Sonoma 14.1 on midyear 2011 i mac before. Plugged in the ethernet cable, restarted and boom, no problem booting. All functions came back and could unplug the ethernet.
👍 thx for the update
Thank you for making my macbook alive again!!!
🚀
A million thanks! I thought I was screwed lol
This video just rescued me and my stuck Mac... Thanks!!!!!
The problem now is, upon installing root patches and restarting, it got stuck again and I had to repeat the whole procedure. 3 times now… Do I have to install the KDK for my system (Ventura 13.6.6)? The problem there is that the latest Ventura version is 13.6.5. Will that work for 13.6.6? Thank you!!!
I think I found a fix. This time I ran First Aid from Disk Utility before reinstalling the Root Patches. It now boots everytime…
@@chrismuzik6959 sounds like you fixed it 👍🚀
Hi Jessie: just found your channel! Great vids! So, if you maybe looking for video topics… I have a MacPro 3,1 running DosDude1 Catalina. I’m thinking to move to OpenCore and a newer OS. So one video of interest would be exploring just how old one can go with OpenCore. But another question and idea relates to getting many multi monitors working on an old MacPro. One of the reasons I bought this MacPro back in the day was the advertisement that it could host up to 8 monitors with the then decent ATI Radion cards that came with it. 4 cards, 2 DVI ports each 4 PCI slots, 8 monitors. My question is how to do that today with a new OS in these old MacPros. I have a GTX680 that has 2 DVI, 1 HDMI, 1 Display Port. In my DosDude1 Catalina 3,1 MacPro I have not been able to more than 1 DVI and 1 HDMI working. Nothing I do seems to bring either the 2nd DVI or the Display Port to life (even if I don’t connect the first DVI or HDMI). Maybe those two latter 2 ports are broken? I have no way to tell. Are the PCI slots limited to 2 monitors? Reason I ask is that one of the Apple approved Metal cards is a single width board with 4 ports (don’t recall which kind they are, maybe Display Port), but if the PCI slot only allows 2 monitors, that would not help. So bottom line, the idea for the video would be how to connect 8 monitors up to an old Mac Pro with a new OS using OpenCore. ;-). Thanks!
Hi, that’s a quite special topic and depends heavy on the graphic cards and the reimplementation of the old drivers into the macOS. Maybe ask on Discord if anyone has tested something like that already?
Thanks for the help... much more comfortable with the system... 5 thumbs up👍👍👍👍👍
My experience with an iMac 12.1 is that only a clean install (of Big Sur in my case ) works well with Open Core Patcher Post Install Root patches! But it won't Boot normally. Always starts with the Big Sur install....
USB method (update or clean) installs root patches automatically...
Awesome as always JEssie. right now i am battling my mac pro 3.1 and sonoma 14 beta. and i have at least two problem children; I have both Asus GTX 1060 AND ATI Radeon HD 5770 installed in this mac. and its boots. but the GPU acceleration is bad as hell atm… I suspect the nvidia web drivers root patched ASWELL as Terascale drivers in the same operation (oclp 1.1.0. having anoither crack at it tomorrow
yeah, that might mess it up
my brain start blame me when my MacBook stuck after update but this man save my MacBook Air thank u r guides
🚀
Mac 2015 with Sonoma 14.2
Installing KDK 14.2 and 14.4 manually didn't work, even resetting NVRAM. I did my research and I noticed that while doing the root patch, is not fetching any KDK thats already installed. Actually, when you install a KDK it should be placed on Library/Developer/KDKs, but that folder is not even created on my Mac. It's worth to mention that have to boot on Safe mode. Any idea?
Only a few Macs require KDK, so maybe your Mac doesn’t?
thanks a bunch :) you solved my headache
Thank you very much. Your video will help me to solve my problem, hopefully. Best regards
Thank you very much, after Update issues to 14.4.1 my mac stuck on the loading Progress bar. With your Help i'm back on my mac
👍🚀
I've gone through the entire procedure repeatedly for Sonoma 14.1.1, using various versions of OpenCore, yet nothing appears to succeed. I always end up getting stuck at the boot bar. Also I am on MacBook Pro 2016.
Check out my latest video, there is Sonoma 14.4 on MBP 2016 updated from Monterey
macOS 14.4 tested on ALL UNSUPPORTED MACs with OpenCore Legacy Patcher 1.4.1!
th-cam.com/video/KwMCiZ3iQH8/w-d-xo.html
@@JessiesFlying Do I just follow exactly what do did on that MacBook? Like a fresh installation?
@@JessiesFlying also when I put my MacBook to update to Sonoma 14.4 it stops when it says about 30 minutes remaining
@@Spikzzz did you use latest OCLP? Root patches installed again before update?
Crazy thing is that the very same thing happened to my fully supported MBP 16 M1 Pro…updated from 13.6.0 to 13.6.1 and boom!….bricked. You need another Mac (that I didn’t have) to revive the SMC and have the Recovery partition re-installed from another Mac with Apple Configurator open (Genius Bar stuff)….basically…wiping the old partition schema and re-initialising my Mac. Hence, you have more options on a Hackintosh and unsupported Macs rather than a fully supported Mac! That’s been too much even for an Apple fanboy like me: I’ve traded-in my Mac, got some good cash for future iPhone upgrades and now I’m finally out of this madness. Linux forever.
I gave up. A recent update had my main work laptop stuck for the weekend. I then tried recovering everything thru time machine. That didn't work. So I erased everything and stated fresh with ventura which is the latest OS my laptop supports. I did love Sonoma but I dont want to walk on eggshells on my work stations. I'll just use the last compatible Ones from now on and avoid the hellish three days of frustration I just went thru installing everything again that I need for work. If I was as knowledgeable as some of these dudes here on TH-cam and was absolutely sure I could get myself out of every hiccup with every update I would definitely continue running unsupported. But this past weekend has just proved to me the importance of ONLY running unsupported Ones on machines that are NOT mission critical!!
That’s sad… 😔
That was very helpful, thank you!
Sadly didn’t work for me. Did everything like you said did the steps in the terminal - MacBook Air still gets stuck at around 40% in the progress bar during booting.
Did you try safe mode already?
Thanks a lot @Jessie! I was struggling with my iMac not working for about a month because of this problem! Althought I got my iMac 2011 "27 running now, I decided to install Monterey because it was working great before I updated it to Sonoma which works temporarily good. The problem I'm facing is that once OCLP 1.5 & Latest Monterey are installed, I am not being able to boot into the iMac after I root patch using an Ethernet. When I try downloading KDK manually even thought I am connected to an ethernet, I noticed there is no 12.7.6 KDK. DO you have any suggestions? Thanks a lot for the great content on your channel!
my iMac 2011 is not working reliable on macOS higher than Big Sur also....
hello jess, thanks in advance for all your videos ... it helps a lot!!!! I am stuck in 1/3 apple logo, I currently using a imac 14.1 (late 2013) everything was fine until I hit update to Sonoma .... after that I got stuck always.... then I was able to boot on safe mode and installed again Sonoma Version 14.5 23F79 and installed Kernel Debug Kit 14.5 build 23F79, always in safe mode and using OCLP version 1.1 ... I reboot and still 1/3...Apple Logo.... dont know what else to do !!!!! any hgelp will be appreciatted
@@zappiros OCLP 1.1 is way too old for Sonoma 14.5…. Try OCLP 1.4.3
Whenever I try going into the 14.1 recovery from the boot screen, I get a black screen and nothing loads. Any fixes for this?
Seems your recovery partition is broken… 😞 fresh install
4:22 A black screen appears because the Recovery 14.1.1 (with a golden system settings icon) doesn’t work from an external SSD on MacbookPro13,2 (Late 2016,13”). The internal SSD is running OCLP 1.2.1 & Sonoma 14.0. KDK 14.0, 14.1 and 14.1.1 were downloaded to the Download folder in both internal and external SSD, and KDK 14.1.1 was run before OCLP 1.2.1 was Build and Install OpenCore to install on a USB Sonoma Installer 14.1.1. The Sonoma 14.1.1 was downloaded from from OCLP 1.2.1. Internet connected via a Ethernet-USB-C adapter and Wi-Fi connected before choosing EFI (tried all 3: EFI Sonoma Installer 14.1.1, external SSD 14.1.1 and internal SSD 14.0). Tried Reset NVRAM. The same procedure works well on a Mac Mini 6,2. What’s the problem and how to overcome?
The error codes:
NpplekeySture:0004:154: unnxpected session: 100000 uld: -1 requested by: bluetootld (154)
OppleKeyStore: 12113:151: operotion fatled (sol: 7 rett 0000222, -1. 100000)
ApplekoyStoro: 12143:151: operation failed (sol: 7 rot: 083002hc.
100000)
IConsolelisers: tin(H) B-2
IConsolelisers: g10ScreenLockState 3, hs 0. bs 8, now B. sa 0x
Couldh't alloc class TuplakeyStoreTest"
fppleuserUSDHostHIDDevico:0x100000513 open by
tOHIDLIbUserCLient:0x100000977 (060)
Couldn't alloc class "ApplekoyStorolest"
AppleftctuatorDeviceliser
Cllent::start Entered
maybe try updating from a USB drive and not from an SSD as there might be some USB/TB drivers not being loaded during setup
@@JessiesFlying Finally MBP13,2 can startup from internal SSD on macOS Sonoma 14.2 with OCLP 1.3.0. To make it happen, I needed to use Internet Recovery to reformat the Internal SSD choosing mac OS Extended (Journaled) because of no APFS, (but failed to reinstall macOS Sierra!), then install macOS Ventura from an Installer USB thumb drive with OCLP 1.3.0. (Now the SSD is formatted into APFS. After macOS Venture started up, install OCLP 1.3.0 to the internal SSD, then go to System Settings > General > Software Update to install macOS Sonoma 14.2, and then use Migration Assistant to transfer the user accounts from the external Startup SSD to the Internal SSD. No KDK was involved during the process. Touch Bar works perfect. Next step on plan: to rescue the external SSD, which fails to startup after failed to update macOS Sonoma to 14.2 from 14.1.2.
@@ivanmytube thx for the info!
Hi Jessie, around 3:40 in your video, when you say keep the CTRL pressed on EFI boot and then what? you go to another screen but don't say what did you do after keeping the CTRL key pressed. When I press the ctrl key the icon changes to circle but when I lift my finger it changes back to an arrow. Can you please specify what exactly do I do while keep pressing the CTRL key. Thanks.
@@tarunkataria6075 keep CTRL pressed and hit return to set it as standard boot option
Thank you so much👑very helpful information🎉
I’ve tried EVERYTHING (followed all your videos) but I still cannot access WiFi 😫 Root patching fails to install Graphics, Networking, and FaceTime camera…..“ unable to build new kernel cache. Reason for patch failure (71) no variant specified falling back to release…..etc”
I guess at least I can still utilize my 2013 MacBook Air with updated Sonoma tethered to an Ethernet cable 😒
But that sounds like a corrupt macOS - did you try installing it from scratch via USB?
I just tried to solve my problem using the instructions from this video. It worked until the commands on terminal, but after that I'm still getting stuck on the Apple logo screen with the progress bar almost in the half
@@thiago.campos does safe mode work?
@@JessiesFlying, it doesn't work either. I tried to follow your instructions from one of your other videos talking about safe mode, but it didn't work either. I decided to install Catalina on my old Macbook Pro 2011 instead
Thank you so much for this tutorial!!
I'm getting stuck at the mounting point. My drive is called Macintosh HD and I do the bless part but I still get nothing. I'm on a Macbook Pro 2011 17 inch. It booted once but now for some reason it's won't boot. I'm not sure I even ran the root patches in the first place. I'm using the 1.5.0 OpenCore Patcher.
@@Axelby1 did you try safe mode? if you have another Mac try to create a USB drive to boot from with another OCLP version…
I have Sonoma in my Mac book air 2017 and my Mac Pro 2010 no issue for now, everything working good thanks
for OCPL Pro. next is my Mac mini 2010. saludes ciao,
👍🚀
Desperately looking for help. I really am in over my head and I cannot get my computer to work following the OpenCore update
See other comment
This channel is incredible. I have an iMac mid 2011. I am stuck on high sierra. Will open core work for my iMac?
Check out here:
Does an UNSUPPORTED macOS make any sense? - Part 1: Vintage MACs
th-cam.com/video/vr3ub4Qq2Ds/w-d-xo.html
In my case I simply had to "switch it off and back on again" .. Single core Mac Pro early 2009
Everything on my 2013 macbook is working fine. I’m on sonoma 14.5. All root patching is done. My laptop doesn’t have audio. Please assist in solving this please
Did all root patches go through (check the log)?
13:50 I tried to use discord but failed to understand it. Jessie, can you give a video lecture so i can follow you there? Thank you 🙏 😅😅😅
you can join my server via the link.... there are a lot of explanation videos for Discord here on TH-cam
@@JessiesFlying Hi Jessie, I clicked on the Discord link above trying to accept the invitation but got the message "Safari cannot open the page because the address is invalid.".
@@ivanmytube this should work: discord.com/invite/rAhpJNqaKS
I have no volume issue in macbook air and nothing shows in output/input audio driver. Unmute is disabled.
? I need more info about that
Well Done! Thanks for sharing.
Thank you so much for this great tutorial
Hi,
Unfortunately this didn't work for me.
Mac mini 2012 i7, OCLP 1.2.1
Still stuck progress bar 40%
May just have to create new partition, install Sonoma and get in that way, or wipe and start over
Did you try this?
Update to macOS 14.1 is stuck? Here is a solution!
th-cam.com/video/fhQ7SWhRakU/w-d-xo.html
Hi@@JessiesFlying ,
Thanks, yes I had seen that video also, but sadly nothing worked.
I've had this experience with both the Mac mini 2012 and also on my 2012 MacBook Air.
In the end I wiped both and reinstalled Catalina and will stay with that.
Neither are my main devices so they were relatively safe to play around with.
Thanks for the videos and all your help.
Thanks for the video. Machine updated itself to Sonoma and was working OK but had no drivers. I dloaded the latest open patcher and loaded the drivers. It asked to update the local open patcher if I remember correctly and from here I reach your stuck screen. I followed your steps and after clicking recovery, screen just remains blank.
Did you try booting safe mode (keep shift pressed)?
Heyy i am stuck with the same issue tooo can you please help me
@@idontshowspeed0 did you try this method already?
@@JessiesFlying i did it it logged in by the safe mode once then i patched it and clicked on reboot and it’s again stuck
,now while pressing the shift the safe mode dosent come up
@@idontshowspeed0 weird… 😐
macOS Sonoma, in my case was stuck at the very tip of the bar and after following this steps until you boot the last sealed macos version is stuck know but at the middle of the bar! What I do now?
Did you try NVRAM reset?
Update to macOS 14.1 is stuck? Here is a solution!
th-cam.com/video/fhQ7SWhRakU/w-d-xo.html
hi, will there be a new OCLP 1.1.x or 1.x.x to have all these issues resolved? so there is no need to go through all these copying and update... cheers,
When you don’t have internet connection you need the appropriate KDK installed before installing root patch ☝️
Thanks! You saved me!
Great job!
open core patcher 1.2.0 is out. Works just fine on macbook pro 2013 from 14.0 to 14.1 just an hour ago.
Thx!
Like always you are the best !, thank you 🙏
Mines is stuck at the last progress bar. It boots for the last time then it gets stuck at the progress bar and it doesn’t even make it halfway through the bar
Try safe mode
I don't understand why after restarting and the commands now it keeps loading when the PC starts up
It’s loading the last version without root patches
Great Tech Support Help!!! 👍👍👍👍👍 & Subscribed!
🚀
Thank you so much works well for me
👍
hey there, when i get to the stage where i input the text into the terminal to bless the mount, i get the message “volume could not be mounted: No such file or directory /sbin/mount_apfs returned non-0 exit status Couldn’t bless the APFS pre boot volume for volume mounted at /Volumes/Mac HD: No such process”. I have checked that the commands i entered are the ones in your video with my own directory and they definitely are. What can I do?
Did you check for the correct name of the drive or are there different names?
Hey Jessie. Can I remove my SSD from my 5,1 Mac Pro, mount it as an external USB to my MacBook and bless the 5,1 SSD from there?
@@adamhutton4165 that should be possible, but I never tried that before
Another great video, Tks a lot Jessie, and what do u think about go to sonoma in mac pro 5.1 (now I use Monterey), regards from Brazil.....
My MacPro 2012 runs great with 14.0 - I'm still testing 14.1.... but Sonoma is way better than Ventura in my opinion
@@JessiesFlying good to know, tks a lot, ur videos always help, :)
Hello Jessie, unfortunately i saw you video too late 😢. When i'm in de apple boot menu and press de control key. the icon changes, but after clicking on the efi logo the imac restarts and i do not get in the next menu as seen in your video. Any tips?
Are you sure OpenCore was configured correctly for your Mac model?
thank you for the video! Question: for every update, it seems that a manual udpate and download of the corresponding KDK is a must. However which should be done first, download to one's computer the KDK or the apple software update? THANKS!
When you download the update the legacy player should download appropriate KDK automatically if needed. After every update another root patch is necessary and then the (maybe) needed KDK is already installed
Mines says I can’t use snapshot options with out bootefi and it couldn’t be blessed I’m a just restart my whole computer
Seems like the snapshot is corrupt… maybe need a fresh install
I'm on 1.2.0 and I left the installer running after the KDK downloader started, but I think there must have been an error downloading the KDK, the install of 14.1.1 went fine, but then I stupidly ran the post install with 14.0 KDK. I'm on a 16,1 iMac, and recovery isnt even booting. I've tried creating a boot disk on another Mac and I can get to terminal in order to try the blessing of the hard drive but I'm just greeted with a blank screen again. Safe mode doesn't seem to work. I've even tried re-installing but I get an error -69716 Storage system verify or repair failed. Very stuck.
That looks like a corrupted file system… try to format disk to macOS extended journaled and install from scratch
Still stuck on logo when restarting after terminal instructions but safe mode works (no internet). Pls help!
@@kimselection try installing root patches again in safe mode