I'm having a headache of a time trying to get spark on my 79 cb250t , new CDI, coils , spark plugs and battery .....my restoration had come to a halt , I'll replay this video tomorrow and test my pickup and stator at the same time lol
Hello friend, I've a Honda CB250N Superdream from 1980, my stator is in bad condition, can you help me to find where i can buy a new one? Or what is the replacement, because I already searched on Ebay and other online stores but I can't find it.
dear sir thanks for the valuable video actually.. But just i need to know whats are the required reading for those tests. My one is cb 250 and rewind it.. Can you tell about that? What are the specified readings for the good stator? Thanks
Hi just bought a w reg 400n it had polished casing put on but the shop owner had it checked and tested which stated the high speed coil was dead how much would it cost to get the stator fixed thanks Les
Hi Leslie, the 400N, T and 450DX stators are very different to the 250 and 400 automatics and it is difficult to give an accurate price to repair these as one or more circuits can fail even if it only the High speed problem you are having, best to drop me an email to info@bbbikeshop.co.uk with a picture of your stator, I can generally work out a cost just by looking at its condition.
Hello, i watch your video to learn a litle bit about coils, and ignitions, im new on motorcycles, i buy a old cb250n in very bad shape, but... the engine was running. Now after about 6 months repair te bike, this week i was trying to start the bike again and nothing happens, no spark! I dont understand how an engine resting on the ground for about 4 months damage the stator, because i do your test that you show and my white and ground are open, there is no value, all others values are ok, just the white wire to green or ground that are open! Therefore no spark rigth? Im from Portugal, can you repair my part? Thanks
Hi, this is a very common problem with this stator and it does happen when the engine has not been run for a while, all of a sudden, no spark after being stored. It is no problem for me to repair for you, I repair loads of these.
Hello! Do you know what is the difference between a flywheel with p/n 032000-0623 and a 032000-0620? Are they interchangeable? Bike is a swedish Honda CB 250N.
Not sure what the differences are? However I know that flywheel 0620 has 2 "pips" on the outside of the flywheel and a flywheel 0622 has only 1"pip" on the outside, but I am not sure what 0623 is like, interchangeability, not sure on that either? Sorry.
@@MrLillen81 If your stator external pickup has just one steel insert then I guess the 0623 should be fine to use, it might just be a weight difference, I know the 400s had different weighted flywheels depending on the models.
@@bbbikeshop8359 I have to give you a big thank you. Really helpful. I got a 1980 250N for free with only 16600km on it and i am about to restore it now. Many thanks.
I never get tired of the video,valuable thankyou!!
Hi I got CB 400 395 TWO CYLINDER WHAT KING OF STATOR GENERATOR I can instal if the original can't find?
I'm having a headache of a time trying to get spark on my 79 cb250t , new CDI, coils , spark plugs and battery .....my restoration had come to a halt , I'll replay this video tomorrow and test my pickup and stator at the same time lol
Most likely it will be the stator, it is a very common for these to fail.
I'm told it's always the stator pick up which bolts to the engine outside the flywheel
Hello friend, I've a Honda CB250N Superdream from 1980, my stator is in bad condition, can you help me to find where i can buy a new one? Or what is the replacement, because I already searched on Ebay and other online stores but I can't find it.
Very helpful, thank you
dear sir thanks for the valuable video actually.. But just i need to know whats are the required reading for those tests. My one is cb 250 and rewind it.. Can you tell about that? What are the specified readings for the good stator? Thanks
Hi just bought a w reg 400n it had polished casing put on but the shop owner had it checked and tested which stated the high speed coil was dead how much would it cost to get the stator fixed thanks Les
Hi Leslie, the 400N, T and 450DX stators are very different to the 250 and 400 automatics and it is difficult to give an accurate price to repair these as one or more circuits can fail even if it only the High speed problem you are having, best to drop me an email to info@bbbikeshop.co.uk with a picture of your stator, I can generally work out a cost just by looking at its condition.
Hi when I grab my stator it moves in and out any ideas on cb250n? Plus noise coming from engine when riding bike
What do you mean "the stator moves in and out"? Or do you mean the Rotor?
@@bbbikeshop8359 if you grab the fly with hand it goes in and out
@@bbbikeshop8359 I think I know what the noise is now I think it's rev counter drive
How to find blue and white wires from stator..my stator coil rewind and wires ara in same colour
It's the ones that come from the two plastic coils on the main stator assy..
I've got a 78 400a, could you do a video on the denzo cdi on the 400a
Sorry, but I am able to do a video on the CDI, I only repair stators.
Yes I need to get my stator fixed as well.is there a way for me to send it to you so you could work your magic on it.?
Hello, i watch your video to learn a litle bit about coils, and ignitions, im new on motorcycles, i buy a old cb250n in very bad shape, but... the engine was running. Now after about 6 months repair te bike, this week i was trying to start the bike again and nothing happens, no spark! I dont understand how an engine resting on the ground for about 4 months damage the stator, because i do your test that you show and my white and ground are open, there is no value, all others values are ok, just the white wire to green or ground that are open! Therefore no spark rigth? Im from Portugal, can you repair my part? Thanks
Hi, this is a very common problem with this stator and it does happen when the engine has not been run for a while, all of a sudden, no spark after being stored. It is no problem for me to repair for you, I repair loads of these.
Hello again, i found your site, i send you an email. Thanks
Hello! Do you know what is the difference between a flywheel with p/n 032000-0623 and a 032000-0620? Are they interchangeable? Bike is a swedish Honda CB 250N.
Not sure what the differences are? However I know that flywheel 0620 has 2 "pips" on the outside of the flywheel and a flywheel 0622 has only 1"pip" on the outside, but I am not sure what 0623 is like, interchangeability, not sure on that either? Sorry.
@@bbbikeshop8359 My 0623 also has one tip. I can't find anywhere information about this. There are alot of them 0624 i also found om Ebay.
@@MrLillen81 If your stator external pickup has just one steel insert then I guess the 0623 should be fine to use, it might just be a weight difference, I know the 400s had different weighted flywheels depending on the models.
@@bbbikeshop8359 I have to give you a big thank you. Really helpful. I got a 1980 250N for free with only 16600km on it and i am about to restore it now. Many thanks.