This was a very wonderful demonstration. You may be the politest TH-camr I have ever watched. I smiled when and laughed when you said, "Please bare with me.".
Hi , thank you for watching the video and commenting , much appreciated . Hopefully my channel can help a few people out with their soldering / desoldering issues . Thanks again , take care 👍
Very nice job... I've done hundreds of these repairs, and none of mine have looked this nice... My proudest job I've done was on a home subwoofer amplifier where the board was broken in half. It was only a double-sided board, so just stitched it back together with short wires. And it worked!
Hi , thank you for your comment, much appreciated. I'm glad you enjoyed the video . Hopefully this and my other TH-cam soldering postings can help people to improve their skills , that would be great . Good luck with all of your soldering projects in the future and thanks again for your support, take care 👍
Hi , thank you for your kind words , very much appreciated. All I wanted to do was help a few people with their soldering / desoldering issues , if I can then I'm happy . I will always post more when I get some spare time . Thanks again , take care 👍
Hi , thank you for your kind words and your support of my channel , very much appreciated . If my videos can help a few people out with their soldering / desoldering issues then I'm happy . Thanks again , take care 👍
Amazing craftsmanship in this tutorial. It goes to show that the more skilled you get, the higher it raises the bar for when you consider a component "blown" beyond repair. This will be useful for some amps and audio gear from the 70s and 80s where those silver traces just lift so easily. Far from an easy fix, but some vintage stuff is worth restoring.
Hi , thank you for your comment, very much appreciated. I'm glad you enjoyed the video . Lots of old stuff is worth repairing , too many old electrical items are needlessly discarded , hopefully my videos on TH-cam can help a few people with their repairs . Thanks again for your support, take care 👍
Hi , thank you for watching the video and commenting , much appreciated . It's great that you fixed your problem , if we can all help each other out then everybody benefits . Thanks again , take care 👍
Many many thanks, i had a cmos battery holder detach from a motherboard, i never ever attempted a repair like this but thanks to this video i repaired it in 5 minutes
Hi , thank you for watching the video and commenting , much appreciated . I'm glad the video helped you out , that's great to hear . Thanks again , take care 👍
Hi , thank you for watching the video and commenting , very much appreciated . Hopefully the video can help a few people out with their trace repairs . Thanks again , take care 👍
Hi , thank you for watching the video and commenting , much appreciated. I'm glad you enjoyed the video, hopefully it can help a few people out with their trace repairs. Thanks again , take care 👍
Hi , thank you for your support of my channel , very much appreciated. I'm glad you enjoyed the videos. Hopefully they've got a little better since my first TH-cam postings . I hope you get on really well with all your soldering projects and thanks again for your time 👍
I learned a lot from you. The way you stripped the wire in several places. I always tried to strip the last end with the other soldered down. Great technique that I will now use. Thanks!
Hi , thank you , I'm glad you found the video useful . If I can help a few people out that's great. Any kind of short wire I always pre prepare my length first so never risking damage to the board which I have seen over the years by different methods people are using . Thanks again , good luck with your soldering projects 👍
Hi , thank you for watching the video and commenting , very kind of you . I'm glad you enjoyed the video , hopefully it can help a few people out . I have recently posted another video on my channel showing 5 ways to repair damaged / broken traces with lots more information in it than this one . Maybe this will be of interest to you . Thanks again for your time , take care 👍
My induction stove had a small broken path in the main circuit board. Thanks to your video I now can repair it. I'll update this comment when it's done thanks!
Hi , thank you for your comment. I have also posted another video showing another 4 ways to fix your traces , this one may be of use to you as well . I hope you get on ok with your project , please keep me updated . Thanks again and good luck 🤞
Hi , thank you for watching the video and commenting , your support is very much appreciated . I'm glad you enjoyed the video , hopefully it can help a few people out . Thanks again , take care 👍
Hi , thank you , much appreciated. I just wanted to show people that things can be fixed , even tiny traces. Hopefully this video will maybe get more people to try trace repairs and save some electronics that may otherwise be scrapped. Thank you for supporting my channel , good luck with any soldering projects you may undertake , all the best 👍
Hi , thank you for your comment, much appreciated. I'm glad you enjoyed the video , hopefully these methods and other trace repair methods I've shown in other TH-cam videos can help a few people out with their soldering issues. Thanks again , take care 👍
Hi , thank you for supporting my channel , it really is appreciated . I'm glad you have found the videos of use , that's great to hear . Thanks again , take care 👍
Superb razor work. I always end up removing a extra inch of PcB, lol :) I used this video to fix my hd 7950 and it worked for along time before just crapping out on me again. This time, the fan controller burned off of the board so Im'a say its done for!
Hi , thank you for watching the video and commenting , much appreciated . I'm sorry to hear your boards finally clapped out . If you ever replace it use the old one to experiment your soldering skills on . That's what I've always done , massive help . Thanks again , take care 👍
Hi , thank you for your comment, if I can help a few people out with their soldering issues then I'm happy. I like to share what I know , hopefully it can help others . Thanks again, take care 👍
Hi , thank you for your kind words , very much appreciated . Hopefully the videos on my channel can help a few people out , if they can then I'm happy. Thanks again , take care 👍
Hi , thank you for watching the video and commenting , really appreciated . Hopefully my channel can help a few people out with their soldering issues . Thanks again , take care 👍
Hi , thank you for your comment, much appreciated. I'm glad you enjoyed the video , and hopefully it can help you fix your problem . Good luck and thank you again for your time 👍
Hi , thank you for your kind words and support of my channel . Hopefully my videos can help a few people out with their soldering problems, if they can that's great. I will always keep posting new ones when I can so hopefully these can also be of use. Thank you again for your support it means a lot 👍
Hi . No problem. I always believe the more methods people can see the easier it is to choose one that's right for them. I quite enjoy posting and especially when people say the videos have helped them . It makes it all worthwhile. Take care and thanks for all of your support 👍
Hi , thank you for your comment, I used to love running wires everywhere then one day I decided to start doing it neatly , but I do miss those messy days 👍
nice straight forward video. i just got a relatively rare 80s car diagnostic scanner that im gonna try this on. it has a burned trace coming off from its db15 port. this vid could save so many old electronics by showing what some steady hands and a bit of skill can do!
Hi , thank you for your comment, much appreciated. If I can help anyone then I'm happy . Hopefully we can all help each other to fix old electronics , if I can play a tiny part in that then great. Thanks again , take care 👍
I got into electronics through hardware hacking. Your videos really inspired me and you're very good at what you do. I want to attach wires to traces, for example rx and tx lines, but it's annoying having bare wires. Any solutions for this without drilling a component into the board (not always possible when the back of the board is used). I've got a hakko rework station, and microscope. your videos inspired me to get those when I had a small amount of inheritance. I'm from UK too :) Just wanted you to know your videos have inspired a new career for me.
Get magnet wire, solder mask, and an ultraviolet light. Magnet wire is coated with enamel to insulate it, the solder mask is the green stuff on pcb's that insulates all the traces & the UV light is for curing the solder mask. When you use enamel wire it usually doesn't need solder mask but it'll give you piece of mind. Only use the tiniest bit of solder mask though because if you use too much the UV light won't penetrate to cure all of the solder mask.
Hi , thank you for watching the video and commenting , very kind of you . I'm glad you enjoyed the video , hopefully it can help a few people out with their trace / track repairs . Thanks again , take care 👍
Thank you sir, that's EXACTLY what my solid state guitar amplifier board looked like. Very Good Video....................... oh ... I "liked /subscribed " and hit the bell also. Thank You
Hi , thank you for subscribing to my channel , your support is very much appreciated . If my videos can help a few people out with their soldering / desoldering issues then that's great . Thanks again , take care 👍
When I worked at NCR back in the early 80s we had what they called track repair which was a tin metal strip similar to what they use to connect solar cells together but we had it in widths the same width as the traces on our circuit boards. I've never seen it available in any catalog that has soldering supplies.
Hi , thank you for your comment , much appreciated. I'm glad you enjoyed the video . You are right , if you can master the patience part of soldering you can achieve good things. Thanks again 👍
Hi , thank you. I'm glad you enjoyed the video over in Italy , nice to know people hopefully can learn a soldering tips to help them with their soldering. Thanks again 👍
Great tutorial. It's a bit of a different way than I'm used to seeing this done, however I think that's just fine - as long as the end results are the same, as well as that the "craftsmanship" continues to work over time (i.e., it doesn't break/stop working after only a week of use, due to poor quality of the work completed).. Anyways, thanks for the video, mate!! I greatly appreciate it! Good job 👍👍👌
Hi , thank you for watching the video and commenting , your support is very much appreciated . I've had all sorts of comments about my accent , some good , some not , but they do make me laugh . Someone thought I was Michael Caine once , wish i had his money though 🤣
Well done Sir though there could be some time sawing shortcuts I'd reccomend: 1. In your Method1 I use just an uninsulated strand of a multistrand cable matching the gauge of the broken track. I do solder one end in and follow the original track to bend at required angles until I reach the destination track. Before I solder the other end I use now the UV activated glue at each bend, then I do terminate and solder the other end. Finally, I use the conformal PCB laquer to finalise the job. 2. The alternative is to use the wire-wrap wire and just to connect between required points. This way it does not have to follow the original track because it is all insulated. This is kind of an equivalent of your Method2. The UV glue is still used to secure the job. The presented video does show the situation I have never encountered in my many years of servicing. Most of the PCB damges of this type did come from a client dropping a device to the ground and caused tracks break on the PCB because of inertia of a heavy element connected to it - like for example, a transformer. The third type of damage you have not covered in this video is the one I found to be most frustrating. It is a dry solder thermal runaway joint of a power component soldered to the PCB destroying the through hole of the at least two layer PCB. Ofcourse, there is more. It may be ancient to you Sir but still relevant; please have a look on this TH-cam link: th-cam.com/video/IBi40aq4-t0/w-d-xo.html Cir-Kit is the hardware to use in ambitious repair but I do not use it very often. Kind Regards
Hi , thank you for your comment , much appreciated . The more you practice the better you will find your soldering becomes . You get to learn the solder thicknesses and tools you need for each job and believe me you will get better . I am trying to show many different aspects of soldering on my channel , hopefully the videos are helping a few people out . Thanks again , take care 👍
Hi , thank you for your support , much appreciated. The solder method mentioned in your comment does generally work really well . It's a lot safer pre- making short wires off the board to the right length rather than trying to strip the wire while one ends attached . This method allows you to do that . Thanks again , and good luck with all your soldering projects 👍
Hi , thank you for watching the video and commenting , very kind of you . Hopefully the video can help a few people out with their trace repairs . Thanks again , take care 👍
@@mrsolderfix3996 You're welcome again mate, tbh I was tinkering about today and came across a question you can educate me on. I removed an eyelet on the topside of a pcb - other than now running a bridging wire from the bottom side of the ic pin (which still has its eyelet in tact) is there a handy way to repair the eyelet sitting on topside of the board. I can rework from the bottom as mentioned but curious what happens when an eyelet ring comes off from the topside of a PCB. Cheers Franky
Hi , I posted a video a while ago showing 4 ways to repair missing pads on through hole connectors . This video may be of use to you . Thanks again for your comments 👍
@@mrsolderfix3996 Had a look see mate not sure whether my skills with a resistor wire are on point! the damage on the board was round 7400 ttl pins so Ill have a crack with a resistor wire or maybe try some thin gauge wire wrapping method, cheers for the heads up - and again very welcome with regards to comments mate, im still real green with the art but gaining knowledge with you vids so thankyou Cheers Franky
Hi , thank you for watching the video and commenting , much appreciated . I'm glad you enjoyed the video , hopefully it can help a few people out . Thanks again , take care 👍
Hi , thank you for your comment. Hopefully the video can help a few people with their trace repairs and get their damaged boards working . Your support is much appreciated, thank you 👍
@@mrsolderfix3996 I am indeed trying to learn how to properly solder and your videos are very helpful. After researching I found that two old radios of mine need recaping and I decided to do it myself. So now, lets say, Im having my theory semester watching your videos. So, again, thank you! *Edit:* note that I thought soldering would be easy, but I was dead wrong. So, Im taking this seriously.
Hi , thank you for watching, hopefully the videos can help you . Biggest thing over the years that I've found helped me was different size solder thicknesses , definitely get some 0.25mm , flux which is essential when soldering and some kind of microscope . I've posted other videos on the tools I use etc , I'm trying eventually to do videos on everything I know. Thanks again , and good luck with everything 👍
Hi , thank you for watching the video and commenting , your support of my channel is very much appreciated . I'm glad you found the video useful , that's great news 👍
Question about the glue you used to stabilize the wire.. Do you have a link? I can't find anything called "Tac Pack" or "Tack Pack" which I think is what you said. Also, is it removable without hurting the traces/board? I have heard people say they use clear fingernail polish because it can be dissolved. Any comment/opinion on that? Also, what about hot glue stick?
Hi thank you for your comment. I think your problem has been that you are spelling it wrong . Try "Tak Pak". Tak Pak is a PCB recommended glue that comes in 2 parts. Activator and glue . Pretty expensive but I purchase each item from eBay seperately and you can get a lot cheaper. Spray activator on first then wait until it's evaporated then apply the glue , very simple . Do not glue first then spray like you are told to do .Can be removed pretty easily with no damage to traces etc . I definitely recommend it for PCB mod wires or trace rework. Hope that helps , thanks again 👍
Hi , thank you for your support , I'm glad you liked the video . I enjoyed making it + hopefully it can help a few people out with their trace / track repairs . Thanks again 👍
This fella is unreal with his work.my missis just looks at the screen and me when I'm watching it and says how do you find this interesting 😂 🤔 saying the person that watches coronation Street religiously 😂 if you know you know it's brilliant keep up the good work 🤷🏼
Hi , thank you for your comment and supporting my channel , very much appreciated . I totally agree about Coronation Street , my wife's the same , loves the soaps , not interested one bit in soldering though . Thanks again , take care 👍
ive done that a few times but i dont usally go as far as Bending perfectly into shape. I use what ever is on hand even some small stranded wire and just strip the ends. Ive even just scraped off the round parts where they end and use a little thicker solder wire and heat it unti it connects and leave the solder wire connected. then cut it a little long and do the same melt it and leave the solder wire on it to the other side. To use the solder wire as a jumper instead.
Hi , thank you for watching the video 👍 Good luck with your repair . Take your time and follow some of my suggestions and hopefully you will be ok . All the best 👍
Hi , thank you for your comment, much appreciated. I'm glad you enjoyed the video , hopefully it can help a few people out with their soldering issues. Thanks again, take care 👍
Hi , thank you for your comment, much appreciated. I'm glad you enjoyed the video , hopefully it can help a few people out with their soldering issues. Thanks again , take care 👍
Hi , thank you for watching the video and commenting, much appreciated. Hopefully these methods can help a few people out in the future . Thanks again , take care 👍
May I suggest a good trick I have discovered for removing trace coating? I do board mods where I cut PCB traces to add smd resistors and I remove the green trace coating with an engraver pen instead of scraping it with an exact knife. It works very fast and leaves clean shiny exposed copper traces. Also in my case with the traces I work on, the engraver is just the exact width of the trace so it works like an absolute charm.
Hi , thank you for your comment , very much appreciated . It's great when people like yourself come up with different methods . I'm definitely of the opinion that the more methods we can get out there the better as I've always said watch them all and choose the option that suits you best . Thanks again , take care 👍
@@mrsolderfix3996 Even when you are are a master, you can still learn something everyday, especially from your students. That's what I like about guys like you and BigClive for instance, you acknowledge that you do not know everything and you stay open to new ideas, thereby elevating your own knowledge and skill to an even higher level. It feels absolutely wonderful to see a pupil growing past you own skills. That's what I experienced when teaching a teen some origami. He was still a beginner then, but nowadays he shares pictures of models he made that I don't dare to try (yet) ;-).
Hi , thank you for your comment , very kind of you . The one thing I always say is no one knows everything and you should always be willing to accept new methods if they can help you . I've learnt lots from other people's methods and hopefully my methods can help a few other people . We can all learn together . Thank you again , take care 👍
Hi , thank you for your support , glad you enjoyed the video . Hopefully it can be of use to a few people and help them with their trace repairs , thanks again 👍
Hi , thank you for your comment, much appreciated. If you check my other postings on TH-cam I've done a through hole pad repair , 4 different ways , also I've done a couple where I've transposed surface mount pads from one board to another , you'll find them eventually, so yes I have done a few. Thanks again 👍
Hi , thank you for your comment , much appreciated . I thought I'd mentioned it in the video , I normally do when I show glueing methods . Anyway the one in this video was called Tak Pak . Comes in 2 parts , glue and activator . Spray activator first then apply glue once activator has evaporated . I get it from Farnell , RS Components etc but have purchased the glue and activator seperately on eBay and got them so much cheaper than from main industry stockists . The eBay ones have been fine . Tak Pak is a recommended PCB glue and is great for modifications on boards . Hope that helps , thanks again 👍
@@mrsolderfix3996 Thank you, sir. Now it's a hundred percent perfection. I've been following your videos and sending them to everyone I know for a while. I very much appreciate all your efforts in filling a skill gap. There is a friend of mine in california who makes great repair videos (mostly microsoldering with a microscope for cellphones and tiny component things and board repairs) and he uses the green stuff that is all over ebay/aliexpress that is the same material that PCB manufacturers use and it takes some UV light to heal/dry. His youtube channel is NortridgeFix. I'll compare the prices of the two methods. Thanks again for everything.
Hi , thank you for your comment. The main cleaning fluid I use is called Ultrasolve and if I can't get hold of that I use one called Flux Off . I've actually posted a video on TH-cam all about these fluids and how I use them , all the information is in that video . Thanks again 👍
I like pressing the ends of my copper wire to flatten them and then after I have soldered them I put on a fairly liberal amount of UV resin and cure it with a UV light and that seals them very well and protects them nicely and if you do a good job it looks very professional. Still good job.
Hi , thank you for your comment. I think with soldering the more methods we all see we get more options to choose the one we like . Your method sounds ok and if it's what you like definitely stick with it . We can all learn from each other . Thanks again for your time , take care 👍
Hi , thank you for your comment , much appreciated. . I'm glad you enjoyed the video , hopefully it can help a few people out . Thanks again , take care 👍
Hi , thank you for your support and comment , much appreciated. I'm glad you enjoyed the video and I'll try and get more repair type videos on my channel in the near future . Thanks again and take care 👍
would you go any thinner than 0.2mm copper wire? I bought some not looking properly and ended up with 0.1mm. It seems very fine. I want to use it to connect a smt32 to a 3.3v rail.
Looks very good. Have you tried the copper slug tape for making tracks it works well for wider tracks you can cut it down the middle with a sharp blade. Try the UV cure glue it’s quicker. Thanks regards Chris
Hi , thank you for your comment 👍 Personally I haven't tried the copper tape but I have seen it in other situations and also postings on TH-cam. It's always good that people like yourself suggest other options , this is of great help to everyone as the more choices the better as far as I'm concerned. I love Tak Pak as a glue so I always tend to use it when I want certain things bonded down to PCB's but again if other people like the one you suggest that's great. Thanks again for your support of my channel it's very much appreciated 👍
Hi , thank you for your question. Yes I do use a stereo long reach microscope for some repairs ( not all ) as these days components , traces etc are just getting smaller and smaller so some kind of magnification tool is essential . Thanks again , take care 👍
Is following the old traces with the new wire or even using the exact same length of wire as the old traces particularly important? I doubt it would in most cases, although I'd imagine it's much more important to make sure the new wiring is properly secured to help prevent tearing of any remaining trace.
Hi , if the tracks are just cut , should be no problem . If you have any loose ends trim them off then remove resist about 1mm or so back on each trace and tin these small areas Then simply attach a suitable wire ( similar width and length ) try and match the outline of the damaged trace that may have been removed. This can be really important. Strip and tin both ends of the new trace wire then simply offer it up to the newly tinned areas on the PCB , flux , then solder . Should get a sound joint if done quickly and correctly , defo use flux . Clean off new joints , cover with solder mask ( if available) and bond wires down about every 1 - 1.5cm. Hope that helps , I've also done other trace repair videos , maybe they will be of use . Thanks again for your question, take care 👍
Hi , thank you for watching the video and commenting , much appreciated . I always prepare and strip the ends before Soldering them . Some people just burn the enamel coating of the thinner wire that I showed but you get a much better result if you gently scrape it off first . Thanks again , take care 👍
@@mrsolderfix3996 I'm a novice with soldering and I buy and repair VCR's and it's best to replace the secondary caps and everytime I remove them some of the copper rings around the holes gets destroyed not sure whether I'm heating the soldering iron too high, or it's the sucker I use or the final bit when I pull the cap out of the hole with pliers. next time I'm going to clean the area first and try using wick for desoldering. For the latest fix there was no copper around the hole so I had to scrape back some of the green to reveal the copper then reach across with one of the caps terminals and solder on, it looks terrible but works, hopefully I won't get any shorts. cheers anyway, great video.
Hi , thank you for your comment, much appreciated. Whenever im replacing missing or damaged traces I always try and match the width of the trace with the new wire. If you put a tiny wire on a large damaged trace for instance the signals that go through it can damage it again . Hopefully that helps , thanks again 👍
Hi , thank you. If my videos can help a few people out with their soldering / desoldering issues then that's great . Thanks again for your support of my channel, it means a lot 👍
Hi , thank you for your comment , much appreciated . I always try and match the width of the trace with the wire I will repair the trace with . In this video the green wire was 30 gauge Kynar wire which is probably the most used wire on PCB's . It's perfect for small width trace repairs and also is used a lot for doing PCB wire modifications . It's great for being able to solder to fine pitch IC pins . So this is my favourite wire but otherwise just try and match the size . Hope that helps , thanks again 👍
This was a very wonderful demonstration. You may be the politest TH-camr I have ever watched. I smiled when and laughed when you said, "Please bare with me.".
Hi , thank you for watching the video and commenting , much appreciated . Hopefully my channel can help a few people out with their soldering / desoldering issues . Thanks again , take care 👍
@@mrsolderfix3996 You're welcome! You take care as well.
Thank you 👍
Very nice job... I've done hundreds of these repairs, and none of mine have looked this nice... My proudest job I've done was on a home subwoofer amplifier where the board was broken in half. It was only a double-sided board, so just stitched it back together with short wires. And it worked!
Hi , thank you for your comment, much appreciated. I'm glad you enjoyed the video . Hopefully this and my other TH-cam soldering postings can help people to improve their skills , that would be great . Good luck with all of your soldering projects in the future and thanks again for your support, take care 👍
You sir have best soldering tutorial on YT!
Hi , thank you for your kind words , very much appreciated. All I wanted to do was help a few people with their soldering / desoldering issues , if I can then I'm happy . I will always post more when I get some spare time . Thanks again , take care 👍
One of the best teaching channels on YT
Hi , thank you for your kind words and your support of my channel , very much appreciated . If my videos can help a few people out with their soldering / desoldering issues then I'm happy . Thanks again , take care 👍
Amazing craftsmanship in this tutorial. It goes to show that the more skilled you get, the higher it raises the bar for when you consider a component "blown" beyond repair. This will be useful for some amps and audio gear from the 70s and 80s where those silver traces just lift so easily. Far from an easy fix, but some vintage stuff is worth restoring.
Hi , thank you for your comment, very much appreciated. I'm glad you enjoyed the video . Lots of old stuff is worth repairing , too many old electrical items are needlessly discarded , hopefully my videos on TH-cam can help a few people with their repairs . Thanks again for your support, take care 👍
Just saved 230 bucks for a new control module on my john deere thanks to this video! Hats off to you sir!
Hi , thank you for watching the video and commenting , much appreciated . It's great that you fixed your problem , if we can all help each other out then everybody benefits . Thanks again , take care 👍
Many many thanks, i had a cmos battery holder detach from a motherboard, i never ever attempted a repair like this but thanks to this video i repaired it in 5 minutes
Hi , thank you for watching the video and commenting , much appreciated . I'm glad the video helped you out , that's great to hear . Thanks again , take care 👍
I did a Xbox Series X HDMI retrace a while back, 12 traces missing and i wish i had watched your video first, very good tips ! appreciate it man !
Hi , thank you for watching the video and commenting , very much appreciated . Hopefully the video can help a few people out with their trace repairs . Thanks again , take care 👍
Brilliantly done and demonstrated. Well worth a watch. 👍👏🏴👍👏🏴
Hi , thank you for watching the video and commenting , much appreciated. I'm glad you enjoyed the video, hopefully it can help a few people out with their trace repairs. Thanks again , take care 👍
it took me 12h to watch it and follow ;-) AMAZING is not enough to say
Hi , thank you for your support of my channel , very much appreciated. I'm glad you enjoyed the videos. Hopefully they've got a little better since my first TH-cam postings . I hope you get on really well with all your soldering projects and thanks again for your time 👍
I learned a lot from you. The way you stripped the wire in several places. I always tried to strip the last end with the other soldered down. Great technique that I will now use. Thanks!
Hi , thank you , I'm glad you found the video useful . If I can help a few people out that's great. Any kind of short wire I always pre prepare my length first so never risking damage to the board which I have seen over the years by different methods people are using . Thanks again , good luck with your soldering projects 👍
Amazing video. Those traces are incredibly small, yet he makes it look so easy! Very impressive craftmanship.
Hi , thank you for watching the video and commenting , very kind of you . I'm glad you enjoyed the video , hopefully it can help a few people out . I have recently posted another video on my channel showing 5 ways to repair damaged / broken traces with lots more information in it than this one . Maybe this will be of interest to you . Thanks again for your time , take care 👍
My induction stove had a small broken path in the main circuit board. Thanks to your video I now can repair it. I'll update this comment when it's done thanks!
Hi , thank you for your comment. I have also posted another video showing another 4 ways to fix your traces , this one may be of use to you as well . I hope you get on ok with your project , please keep me updated . Thanks again and good luck 🤞
@@mrsolderfix3996 it was not a project. It was just an item that has to be fixed in home.
Hi , no problem.
That's disturbingly professional!😩👍
Hi , thank you for your support , glad you enjoyed the video 👍
I’m so happy this video exists. Nicely done 👍
Hi , thank you for watching the video and commenting , your support is very much appreciated . I'm glad you enjoyed the video , hopefully it can help a few people out . Thanks again , take care 👍
Nice clean work, you make it look so easy with these tiny tracks. Thank you.
Hi , thank you , much appreciated. I just wanted to show people that things can be fixed , even tiny traces. Hopefully this video will maybe get more people to try trace repairs and save some electronics that may otherwise be scrapped. Thank you for supporting my channel , good luck with any soldering projects you may undertake , all the best 👍
This is a masterclass in this technique. Bravo!
Hi , thank you for your comment, much appreciated. I'm glad you enjoyed the video , hopefully these methods and other trace repair methods I've shown in other TH-cam videos can help a few people out with their soldering issues. Thanks again , take care 👍
I am just learning to solder and this channel is amazing. Thank you for creating so many great videos.
Hi , thank you for supporting my channel , it really is appreciated . I'm glad you have found the videos of use , that's great to hear . Thanks again , take care 👍
Superb razor work. I always end up removing a extra inch of PcB, lol :) I used this video to fix my hd 7950 and it worked for along time before just crapping out on me again. This time, the fan controller burned off of the board so Im'a say its done for!
Hi , thank you for watching the video and commenting , much appreciated . I'm sorry to hear your boards finally clapped out . If you ever replace it use the old one to experiment your soldering skills on . That's what I've always done , massive help . Thanks again , take care 👍
Your solder tricks are awesome. Made life a bit easier for us. 🖖🏻
Hi , thank you for your comment, if I can help a few people out with their soldering issues then I'm happy. I like to share what I know , hopefully it can help others . Thanks again, take care 👍
The editing on these videos is absolutely mad, and I love it. Thank you ❤
Hi , thank you for your kind words , very much appreciated . Hopefully the videos on my channel can help a few people out , if they can then I'm happy. Thanks again , take care 👍
@@mrsolderfix3996 you’ve helped me plenty, thank you for sharing your experience with us!
You're a master at fine soldering and electric repair, those trace repairs look amazing.
Hi , thank you for watching the video and commenting , really appreciated . Hopefully my channel can help a few people out with their soldering issues . Thanks again , take care 👍
excellent craftmanship!, i think i can now repair my ac to dc converter for my rv camper. thanks!
Hi , thank you for your comment, much appreciated. I'm glad you enjoyed the video , and hopefully it can help you fix your problem . Good luck and thank you again for your time 👍
Awesome vids all the time. Love watching them.
Thanks MSF for posting all your great tips, tricks and work. 👍
Hi , thank you for your kind words and support of my channel .
Hopefully my videos can help a few people out with their soldering problems, if they can that's great.
I will always keep posting new ones when I can so hopefully these can also be of use.
Thank you again for your support it means a lot 👍
@@mrsolderfix3996 YW my friend and TY for all the time and effort you take to produce these vids and to help and teach others. Much appreciated. 😊👍
Hi . No problem. I always believe the more methods people can see the easier it is to choose one that's right for them.
I quite enjoy posting and especially when people say the videos have helped them . It makes it all worthwhile.
Take care and thanks for all of your support 👍
Great Video.
Never forget hot melt glue for retaining wires.
Works a treat and also quick setting👍
Hi , thank you for your comment , much appreciated 👍
I personally love running wires everywhere lol love you content bro 👍
Hi , thank you for your comment, I used to love running wires everywhere then one day I decided to start doing it neatly , but I do miss those messy days 👍
nice straight forward video. i just got a relatively rare 80s car diagnostic scanner that im gonna try this on. it has a burned trace coming off from its db15 port. this vid could save so many old electronics by showing what some steady hands and a bit of skill can do!
Hi , thank you for your comment, much appreciated. If I can help anyone then I'm happy . Hopefully we can all help each other to fix old electronics , if I can play a tiny part in that then great. Thanks again , take care 👍
I got into electronics through hardware hacking. Your videos really inspired me and you're very good at what you do. I want to attach wires to traces, for example rx and tx lines, but it's annoying having bare wires. Any solutions for this without drilling a component into the board (not always possible when the back of the board is used). I've got a hakko rework station, and microscope. your videos inspired me to get those when I had a small amount of inheritance. I'm from UK too :) Just wanted you to know your videos have inspired a new career for me.
Get magnet wire, solder mask, and an ultraviolet light. Magnet wire is coated with enamel to insulate it, the solder mask is the green stuff on pcb's that insulates all the traces & the UV light is for curing the solder mask. When you use enamel wire it usually doesn't need solder mask but it'll give you piece of mind. Only use the tiniest bit of solder mask though because if you use too much the UV light won't penetrate to cure all of the solder mask.
this was awesome to watch!! thank you!!
Hi , thank you for watching the video and commenting , very kind of you . I'm glad you enjoyed the video , hopefully it can help a few people out with their trace / track repairs . Thanks again , take care 👍
Very nice brother 👍👍👍 I am from India Jammu and Kashmir.
Hi , thank you for your comment, much appreciated. I'm glad you enjoyed the video . If I can help anyone then I'm happy . Thanks again , take care 👍
Thank you sir, that's EXACTLY what my solid state guitar amplifier board looked like. Very Good Video....................... oh ... I "liked /subscribed " and hit the bell also. Thank You
Hi , thank you for subscribing to my channel , your support is very much appreciated . If my videos can help a few people out with their soldering / desoldering issues then that's great . Thanks again , take care 👍
You should have been a Surgeon 👍👍😎
Hi , thank you for watching the video and commenting , your support of my channel is very much appreciated 👍
When I worked at NCR back in the early 80s we had what they called track repair which was a tin metal strip similar to what they use to connect solar cells together but we had it in widths the same width as the traces on our circuit boards. I've never seen it available in any catalog that has soldering supplies.
Brings back childhood memories of my entry into electronics repair
Hi , thank you for watching the video and commenting , much appreciated 👍
It needs lots of patience, very good video 👍
Hi , thank you for your comment , much appreciated. I'm glad you enjoyed the video . You are right , if you can master the patience part of soldering you can achieve good things. Thanks again 👍
Great tutorial and good job 🙂thanks!
Hi , thank you for watching the video and commenting , your support is very much appreciated 👍
Good evening. Great job...and valuable suggestions from a true pro! Regards from Italy.
Hi , thank you. I'm glad you enjoyed the video over in Italy , nice to know people hopefully can learn a soldering tips to help them with their soldering. Thanks again 👍
Wao great work sir nicely and clean done very well amazing from india 💕👍
Hi , thank you for your support, very much appreciated. I'm glad you enjoyed the video and hopefully found it useful . Take care and thank you again 👍
Bravo! Thank you so so much :) accent is poetic i could listen as well
Hi , thank you for watching the video and commenting , your support is very much appreciated 👍
We’ll done! Both great methods, thanks
Hi , thank you for your comment, much appreciated. Glad you enjoyed the video 👍
Excellent video and instruction. Thanks for posting
Hi , thank you for watching the video and commenting , very much appreciated 👍
Good work..I use a pencil eraser to clean those bare copper pads. I see you applied flux and that also worked very well. Thanks again.
Hi , thank you. I'm glad you enjoyed the video , hopefully it can help a few people out , thanks again 👍
Great tutorial.
It's a bit of a different way than I'm used to seeing this done, however I think that's just fine - as long as the end results are the same, as well as that the "craftsmanship" continues to work over time (i.e., it doesn't break/stop working after only a week of use, due to poor quality of the work completed)..
Anyways, thanks for the video, mate!! I greatly appreciate it! Good job 👍👍👌
Proppa londoner, absolutely great matey. Love your accent
Hi , thank you for watching the video and commenting , your support is very much appreciated . I've had all sorts of comments about my accent , some good , some not , but they do make me laugh . Someone thought I was Michael Caine once , wish i had his money though 🤣
Well done Sir though there could be some time sawing shortcuts I'd reccomend:
1. In your Method1 I use just an uninsulated strand of a multistrand cable matching the gauge of the broken track. I do solder one end in and follow the original track to bend at required angles until I reach the destination track. Before I solder the other end I use now the UV activated glue at each bend, then I do terminate and solder the other end. Finally, I use the conformal PCB laquer to finalise the job.
2. The alternative is to use the wire-wrap wire and just to connect between required points. This way it does not have to follow the original track because it is all insulated. This is kind of an equivalent of your Method2. The UV glue is still used to secure the job.
The presented video does show the situation I have never encountered in my many years of servicing. Most of the PCB damges of this type did come from a client dropping a device to the ground and caused tracks break on the PCB because of inertia of a heavy element connected to it - like for example, a transformer.
The third type of damage you have not covered in this video is the one I found to be most frustrating. It is a dry solder thermal runaway joint of a power component soldered to the PCB destroying the through hole of the at least two layer PCB.
Ofcourse, there is more. It may be ancient to you Sir but still relevant;
please have a look on this TH-cam link:
th-cam.com/video/IBi40aq4-t0/w-d-xo.html
Cir-Kit is the hardware to use in ambitious repair but I do not use it very often.
Kind Regards
Thank you for uploading this information.
Hi , thank you for watching the video and commenting , very much appreciated 👍
Beautiful work, I'm an amateur and I've repaired a broken trace in a flat ribbon cable and it looked the extreme opposite of this!
Hi , thank you for your comment , much appreciated . The more you practice the better you will find your soldering becomes . You get to learn the solder thicknesses and tools you need for each job and believe me you will get better . I am trying to show many different aspects of soldering on my channel , hopefully the videos are helping a few people out . Thanks again , take care 👍
Great idea the use of solder to get the shape then straighten and cut wire to length.
Hi , thank you for your support , much appreciated. The solder method mentioned in your comment does generally work really well . It's a lot safer pre- making short wires off the board to the right length rather than trying to strip the wire while one ends attached . This method allows you to do that . Thanks again , and good luck with all your soldering projects 👍
thank You, I'll fix mine now, great video!
Hi , thank you for watching the video and commenting , very kind of you . Hopefully the video can help a few people out with their trace repairs . Thanks again , take care 👍
Great Tutorial Mate well explained and documented!
Hi , thank you for your comment , much appreciated. I'm glad you enjoyed the video , hopefully it can help a few people out. Thanks again 👍
@@mrsolderfix3996 You're welcome again mate, tbh I was tinkering about today and came across a question you can educate me on. I removed an eyelet on the topside of a pcb - other than now running a bridging wire from the bottom side of the ic pin (which still has its eyelet in tact) is there a handy way to repair the eyelet sitting on topside of the board. I can rework from the bottom as mentioned but curious what happens when an eyelet ring comes off from the topside of a PCB.
Cheers Franky
Hi , I posted a video a while ago showing 4 ways to repair missing pads on through hole connectors . This video may be of use to you . Thanks again for your comments 👍
@@mrsolderfix3996 Had a look see mate not sure whether my skills with a resistor wire are on point! the damage on the board was round 7400 ttl pins so Ill have a crack with a resistor wire or maybe try some thin gauge wire wrapping method, cheers for the heads up - and again very welcome with regards to comments mate, im still real green with the art but gaining knowledge with you vids so thankyou
Cheers
Franky
The part about using a piece of solder to shape the wire is pure genius.
Hi , thank you for watching the video and commenting , much appreciated . I'm glad you enjoyed the video , hopefully it can help a few people out . Thanks again , take care 👍
@@mrsolderfix3996Mało profesjonalne, robota . Tnx .
Awesome work, honestly so clean
Hi , thank you for your comment, very much appreciated. I'm glad you enjoyed the video 👍
Sir, you have impressive skills.
Hi , thank you for watching the video and commenting , much appreciated. Hopefully the video can help a few people out. Thanks again 👍
nice and very perfect work sir take love from bangladesh
Hi , thank you for watching the video and commenting , your support of my channel is very much appreciated 👍
Yes all the brocken AMIGAS that has been restored by TH-cam butches shade a tear now! Repair nice done!
Hi , thank you for your comment. Hopefully the video can help a few people with their trace repairs and get their damaged boards working .
Your support is much appreciated, thank you 👍
Thank you for making this video!
Hi , no problem , hopefully it can help a few people out. Thank you for your support , take care 👍
@@mrsolderfix3996 I am indeed trying to learn how to properly solder and your videos are very helpful. After researching I found that two old radios of mine need recaping and I decided to do it myself. So now, lets say, Im having my theory semester watching your videos. So, again, thank you! *Edit:* note that I thought soldering would be easy, but I was dead wrong. So, Im taking this seriously.
Hi , thank you for watching, hopefully the videos can help you . Biggest thing over the years that I've found helped me was different size solder thicknesses , definitely get some 0.25mm , flux which is essential when soldering and some kind of microscope . I've posted other videos on the tools I use etc , I'm trying eventually to do videos on everything I know. Thanks again , and good luck with everything 👍
@@mrsolderfix3996 Thank you mate!
👍
Thank you for the hint with tape!
Hi , thank you for watching the video and commenting , your support of my channel is very much appreciated . I'm glad you found the video useful , that's great news 👍
Thank you for the great video.
Hi , thank you for watching the video and commenting , your support is very much appreciated 👍
Question about the glue you used to stabilize the wire.. Do you have a link? I can't find anything called "Tac Pack" or "Tack Pack" which I think is what you said. Also, is it removable without hurting the traces/board? I have heard people say they use clear fingernail polish because it can be dissolved. Any comment/opinion on that? Also, what about hot glue stick?
Hi thank you for your comment. I think your problem has been that you are spelling it wrong . Try "Tak Pak".
Tak Pak is a PCB recommended glue that comes in 2 parts. Activator and glue . Pretty expensive but I purchase each item from eBay seperately and you can get a lot cheaper. Spray activator on first then wait until it's evaporated then apply the glue , very simple . Do not glue first then spray like you are told to do .Can be removed pretty easily with no damage to traces etc . I definitely recommend it for PCB mod wires or trace rework. Hope that helps , thanks again 👍
So beautiful, I leaned forward and kissed the screen. :)
Hi , thank you for your support of my channel , it's very much appreciated 👍
This have way few likes, awesome work!
Hi , thank you for your support , I'm glad you liked the video . I enjoyed making it + hopefully it can help a few people out with their trace / track repairs . Thanks again 👍
Yes, some clowns that just dismantle things have over a million subscribers and thousands of likes. This channel deserves better.
Hi , thank you. As long as a few people can benefit from the videos that's fine . I will post more when I get some time , thanks again , take care 👍
That's a clean repair if I have ever seen one. Subscribing!
Hi , thank you very much for watching the video and subscribing, very much appreciated 👍
Thank you Sir, helpful for me 🙏👍
Hi , thank you for supporting my channel , very kind of you . I'm glad you found the video useful , that's great news. Thanks again , take care 👍
This fella is unreal with his work.my missis just looks at the screen and me when I'm watching it and says how do you find this interesting 😂 🤔 saying the person that watches coronation Street religiously 😂 if you know you know it's brilliant keep up the good work 🤷🏼
Hi , thank you for your comment and supporting my channel , very much appreciated . I totally agree about Coronation Street , my wife's the same , loves the soaps , not interested one bit in soldering though . Thanks again , take care 👍
ive done that a few times but i dont usally go as far as Bending perfectly into shape. I use what ever is on hand even some small stranded wire and just strip the ends. Ive even just scraped off the round parts where they end and use a little thicker solder wire and heat it unti it connects and leave the solder wire connected. then cut it a little long and do the same melt it and leave the solder wire on it to the other side. To use the solder wire as a jumper instead.
Thanks, this video help me to try to repair a controller joystick fault
Hi , thank you for watching the video 👍 Good luck with your repair . Take your time and follow some of my suggestions and hopefully you will be ok . All the best 👍
Well presented. Thank you
Hi , thank you for your comment, much appreciated. I'm glad you enjoyed the video , hopefully it can help a few people out with their soldering issues. Thanks again, take care 👍
Great Video, Thank you!!!!!🙂
Hi , thank you for your support, very much appreciated. I'm glad you enjoyed the video . Take care 👍
thankyou sir, excellent video and explination, good day to you from wenatchee usa
Hi , thank you for your comment, much appreciated. I'm glad you enjoyed the video , hopefully it can help a few people out with their soldering issues. Thanks again , take care 👍
Best tutorial, I liked and subbed.
Hi , thank you for watching the video and commenting, much appreciated. Hopefully these methods can help a few people out in the future . Thanks again , take care 👍
May I suggest a good trick I have discovered for removing trace coating? I do board mods where I cut PCB traces to add smd resistors and I remove the green trace coating with an engraver pen instead of scraping it with an exact knife. It works very fast and leaves clean shiny exposed copper traces. Also in my case with the traces I work on, the engraver is just the exact width of the trace so it works like an absolute charm.
Hi , thank you for your comment , very much appreciated . It's great when people like yourself come up with different methods . I'm definitely of the opinion that the more methods we can get out there the better as I've always said watch them all and choose the option that suits you best . Thanks again , take care 👍
@@mrsolderfix3996 Even when you are are a master, you can still learn something everyday, especially from your students. That's what I like about guys like you and BigClive for instance, you acknowledge that you do not know everything and you stay open to new ideas, thereby elevating your own knowledge and skill to an even higher level.
It feels absolutely wonderful to see a pupil growing past you own skills. That's what I experienced when teaching a teen some origami. He was still a beginner then, but nowadays he shares pictures of models he made that I don't dare to try (yet) ;-).
Hi , thank you for your comment , very kind of you . The one thing I always say is no one knows everything and you should always be willing to accept new methods if they can help you . I've learnt lots from other people's methods and hopefully my methods can help a few other people . We can all learn together . Thank you again , take care 👍
Amazing job!! thank you a lot for sharing.i really love it
Hi , thank you for your support , glad you enjoyed the video . Hopefully it can be of use to a few people and help them with their trace repairs , thanks again 👍
Thanks for your tutorials ,very nice🇲🇨
Hi , thank you for your comment , and for your support of my channel , very much appreciated, take care 👍
What glue are you using to set and keep the wires down near the end of the video?
What kind of flux are you using?
And what was the two part glue you used? Or activator an glue.
This is great for traces, what about where the pad is damaged, do you have a tactic for that?
Hi , thank you for your comment, much appreciated. If you check my other postings on TH-cam I've done a through hole pad repair , 4 different ways , also I've done a couple where I've transposed surface mount pads from one board to another , you'll find them eventually, so yes I have done a few. Thanks again 👍
perfection! only thing missing is what specific brand/kind of glue do you use or recommend?
Hi , thank you for your comment , much appreciated . I thought I'd mentioned it in the video , I normally do when I show glueing methods . Anyway the one in this video was called Tak Pak . Comes in 2 parts , glue and activator . Spray activator first then apply glue once activator has evaporated . I get it from Farnell , RS Components etc but have purchased the glue and activator seperately on eBay and got them so much cheaper than from main industry stockists . The eBay ones have been fine . Tak Pak is a recommended PCB glue and is great for modifications on boards . Hope that helps , thanks again 👍
@@mrsolderfix3996 Thank you, sir. Now it's a hundred percent perfection. I've been following your videos and sending them to everyone I know for a while. I very much appreciate all your efforts in filling a skill gap. There is a friend of mine in california who makes great repair videos (mostly microsoldering with a microscope for cellphones and tiny component things and board repairs) and he uses the green stuff that is all over ebay/aliexpress that is the same material that PCB manufacturers use and it takes some UV light to heal/dry. His youtube channel is NortridgeFix. I'll compare the prices of the two methods. Thanks again for everything.
What cleaning fluid did you say you use? I couldn't make out the name. Thanks!
Hi , thank you for your comment. The main cleaning fluid I use is called Ultrasolve and if I can't get hold of that I use one called Flux Off . I've actually posted a video on TH-cam all about these fluids and how I use them , all the information is in that video . Thanks again 👍
@@mrsolderfix3996 wonderful, thanks!
Hi , no problem 👍
I like pressing the ends of my copper wire to flatten them and then after I have soldered them I put on a fairly liberal amount of UV resin and cure it with a UV light and that seals them very well and protects them nicely and if you do a good job it looks very professional. Still good job.
Hi , thank you for your comment. I think with soldering the more methods we all see we get more options to choose the one we like . Your method sounds ok and if it's what you like definitely stick with it . We can all learn from each other . Thanks again for your time , take care 👍
Thanks, gauge of the copper joining cable ?
Hi , thank you for your comment. The small Enamelled copper wire is 32 gauge. , which is 0.2mm . Hope that helps , thanks again 👍
Very good 👍 ,, is clean
awesome video❤
Hi , thank you for your comment , much appreciated. . I'm glad you enjoyed the video , hopefully it can help a few people out . Thanks again , take care 👍
what is the liquid called you used to hold the wires in place? thank you. helpful video
outstanding work my friend.
Hi , thank you for your support and comment , much appreciated. I'm glad you enjoyed the video and I'll try and get more repair type videos on my channel in the near future . Thanks again and take care 👍
Hi ... thank you for the video
One question: Is it important to cover the end of the wires by isolator material for safety?
would you go any thinner than 0.2mm copper wire? I bought some not looking properly and ended up with 0.1mm. It seems very fine. I want to use it to connect a smt32 to a 3.3v rail.
Looks very good. Have you tried the copper slug tape for making tracks it works well for wider tracks you can cut it down the middle with a sharp blade. Try the UV cure glue it’s quicker. Thanks regards Chris
Hi , thank you for your comment 👍 Personally I haven't tried the copper tape but I have seen it in other situations and also postings on TH-cam. It's always good that people like yourself suggest other options , this is of great help to everyone as the more choices the better as far as I'm concerned. I love Tak Pak as a glue so I always tend to use it when I want certain things bonded down to PCB's but again if other people like the one you suggest that's great. Thanks again for your support of my channel it's very much appreciated 👍
@@mrsolderfix3996 I haven’t Tried Tac Pac but I will now. As you say always something to learn
Awesome thank you for sharing
Hi , thank you for watching the video and commenting , your support is very much appreciated 👍
Very neat. Thanks.
Hi , thank you for your comment, much appreciated 👍
Great stuff man!
Thanks for the tips!
Do you use a magnifier to repair the traces? They seem really small.
Hi , thank you for your question. Yes I do use a stereo long reach microscope for some repairs ( not all ) as these days components , traces etc are just getting smaller and smaller so some kind of magnification tool is essential . Thanks again , take care 👍
Great tips!
Hi , thank you for your comment . I'm glad you enjoyed the video and you found the tips useful . Thanks again , take care 👍
What kind of microscope are you using?
Is following the old traces with the new wire or even using the exact same length of wire as the old traces particularly important?
I doubt it would in most cases, although I'd imagine it's much more important to make sure the new wiring is properly secured to help prevent tearing of any remaining trace.
for me, this happened on my laptop but its not peeled off just cut will this work?
Hi , if the tracks are just cut , should be no problem . If you have any loose ends trim them off then remove resist about 1mm or so back on each trace and tin these small areas Then simply attach a suitable wire ( similar width and length ) try and match the outline of the damaged trace that may have been removed. This can be really important. Strip and tin both ends of the new trace wire then simply offer it up to the newly tinned areas on the PCB , flux , then solder . Should get a sound joint if done quickly and correctly , defo use flux . Clean off new joints , cover with solder mask ( if available) and bond wires down about every 1 - 1.5cm. Hope that helps , I've also done other trace repair videos , maybe they will be of use . Thanks again for your question, take care 👍
@@mrsolderfix3996 can u make a video about it so i can show the repair area how to fix it? i dont really have the soldier tools
did you cut the wire cover off the ends or do you not have to?
Hi , thank you for watching the video and commenting , much appreciated . I always prepare and strip the ends before Soldering them . Some people just burn the enamel coating of the thinner wire that I showed but you get a much better result if you gently scrape it off first . Thanks again , take care 👍
@@mrsolderfix3996 I'm a novice with soldering and I buy and repair VCR's and it's best to replace the secondary caps and everytime I remove them some of the copper rings around the holes gets destroyed not sure whether I'm heating the soldering iron too high, or it's the sucker I use or the final bit when I pull the cap out of the hole with pliers. next time I'm going to clean the area first and try using wick for desoldering. For the latest fix there was no copper around the hole so I had to scrape back some of the green to reveal the copper then reach across with one of the caps terminals and solder on, it looks terrible but works, hopefully I won't get any shorts. cheers anyway, great video.
hello mate, im new to repairs, how thick schould the wires be ?
Hi , thank you for your comment, much appreciated. Whenever im replacing missing or damaged traces I always try and match the width of the trace with the new wire. If you put a tiny wire on a large damaged trace for instance the signals that go through it can damage it again . Hopefully that helps , thanks again 👍
@@mrsolderfix3996 Yes, thanks for that quick answer :).
Hi , no problem 👍
Amazing skills
Hi , thank you. If my videos can help a few people out with their soldering / desoldering issues then that's great . Thanks again for your support of my channel, it means a lot 👍
Great content Sir!
What type of wire do you use when doing a pcb trace repair. Appreciate the help❤️
Hi , thank you for your comment , much appreciated . I always try and match the width of the trace with the wire I will repair the trace with . In this video the green wire was 30 gauge Kynar wire which is probably the most used wire on PCB's . It's perfect for small width trace repairs and also is used a lot for doing PCB wire modifications . It's great for being able to solder to fine pitch IC pins . So this is my favourite wire but otherwise just try and match the size . Hope that helps , thanks again 👍
Great video!
Hi , thank you for your comment , much appreciated. I'm glad you enjoyed the video and hopefully found it useful , thanks again 👍