I appreciate this walk through, I've just picked up a SWORKS 2020 frame to build up, it has the same flaked carbon look which is absolutely incredible, super stealth. Can't wait to get the bike built over the next month. Cheers.
I recently built up a 22 S-Works EVO and coming from a regular Stumpjumper, I am super happy with it. The SJ was a livelier ride, but there just wasn’t enough travel. I built mine full XT w/ a Factory 36 and although I only have like 80 miles on mine, but I feel like I’ll be keeping this one for quite a few years.
hey man great video - love that bike and thats a sweet ass build! just a quick one, where did you get the fox 36 decals from? i like how they are stealth but still visible?
Sounds like a sweet bike! I'm 6' tall and it's an S4. I run a 50mm stem, but I've played around with a 40mm as well. Maybe 45mm is the magic number though?
The bike looks amazing you did a great job. I've got a 2021 evo also and was thinking about going to 170mm of travel in the front to avoid so many pedal strikes, do you think this would ruin the bike?
I don't think it would be the worst thing, but you may want to check with Specialized first. If you went that route, just avoid the extremes, such as the low bb setting in combination with the -1º headset cup. Maybe just try the high/neutral setting with a 170mm travel?
I'm going with 150mm front and rear, coiled suspension, Push to be exact. Do you think 150mm up front will effect performance? I'm coming off a 170enduro rig and want to get away from long travel sleds and think the factory 160/150 spec is splitting hairs.
That'd likely be a great all rounder. I hear the Push is incredible on this bike - really the only way to go coil on it in my opinion. 150 up front sounds cool...However, you could always just run 160mm and keep it on the firm side to preserve your geo.
@@mtb-mag I built it up 160/150 full carbon and adjusted the suspension to Push recommendations. Man that bike is a blast to ride, good peddling,flickable and DH worthy as well. It's like having two bikes in one. I'll never buy a long travel enduro sled again, the EVO does it all IMO.
Wow, amazing build! I'm between swapping my frame for either a Bronson or a stumpy Evo (w/ mullet link). How do you think the two bikes compare for someone who wants only one bike to do it all?
Man...That really is a tough one. I think the suspension on the Bronson is slightly better than the SJEVO. But! The downtube storage and the massive range in adjustments on the SJEVO is very very huge if you only have one bike.
Yo! Thanks. I don't think the Zeb would be overkill. For me personally, I did try a 38 on this bike and went back to a 36 after a few rides. It was fine, but I wanted to try to keep the bike lighter and more tilted toward an all rounder. I would probably go Zeb over Lyrik but 36 over 38 with my reasoning being that the 36 is slightly beefier than a Lyrik. I'm not sure if that makes any sense, but it's my rationale. Ha!
Cant wait to get the S-Works Stumpjumper EVO frame!!!! This things beeeeeautiful
I appreciate this walk through, I've just picked up a SWORKS 2020 frame to build up, it has the same flaked carbon look which is absolutely incredible, super stealth. Can't wait to get the bike built over the next month. Cheers.
I recently built up a 22 S-Works EVO and coming from a regular Stumpjumper, I am super happy with it. The SJ was a livelier ride, but there just wasn’t enough travel.
I built mine full XT w/ a Factory 36 and although I only have like 80 miles on mine, but I feel like I’ll be keeping this one for quite a few years.
Excellent bike built!
Thanks!
Love it man! Great showing.. can we see ya shred it soon!?! 🤓
Thanks! Hopefully. I've been hanging some interesting test parts on it lately, so eventually we'll get some clips.
Looks the nuts ! 👌👍🔥
🤙
hey man great video - love that bike and thats a sweet ass build! just a quick one, where did you get the fox 36 decals from? i like how they are stealth but still visible?
Thanks - Look up Stikrd for the decals!
I have similar build with specialized evo limited with axs. What size your bike and stem length?
Sounds like a sweet bike! I'm 6' tall and it's an S4. I run a 50mm stem, but I've played around with a 40mm as well. Maybe 45mm is the magic number though?
Piecing together all the parts. Did you go 170 or 165mm crankarms?
170mm - although, 165 sounds kind of fun!
@@mtb-mag I figure with the low bb it might help?
The bike looks amazing you did a great job. I've got a 2021 evo also and was thinking about going to 170mm of travel in the front to avoid so many pedal strikes, do you think this would ruin the bike?
I don't think it would be the worst thing, but you may want to check with Specialized first. If you went that route, just avoid the extremes, such as the low bb setting in combination with the -1º headset cup. Maybe just try the high/neutral setting with a 170mm travel?
I'm going with 150mm front and rear, coiled suspension, Push to be exact. Do you think 150mm up front will effect performance? I'm coming off a 170enduro rig and want to get away from long travel sleds and think the factory 160/150 spec is splitting hairs.
That'd likely be a great all rounder. I hear the Push is incredible on this bike - really the only way to go coil on it in my opinion. 150 up front sounds cool...However, you could always just run 160mm and keep it on the firm side to preserve your geo.
@@mtb-mag I built it up 160/150 full carbon and adjusted the suspension to Push recommendations. Man that bike is a blast to ride, good peddling,flickable and DH worthy as well. It's like having two bikes in one. I'll never buy a long travel enduro sled again, the EVO does it all IMO.
@@TheDirthound How did you adjust according to Push recommendations, do you have to send them the shock and fork?
Wow, amazing build!
I'm between swapping my frame for either a Bronson or a stumpy Evo (w/ mullet link). How do you think the two bikes compare for someone who wants only one bike to do it all?
Man...That really is a tough one. I think the suspension on the Bronson is slightly better than the SJEVO. But! The downtube storage and the massive range in adjustments on the SJEVO is very very huge if you only have one bike.
What is the headset that you used in your build? Love the bike!
Thanks! It's just the stock headset - which is brilliant and adjustable...
I would like to build a house myself, how much would it cost in materials?
Have you upgraded the headset......chris king, wolf tooth, cane creek? I'm trying to figure out what would work well for this bike.
As far as I know, because the headset has the adjustable option, I don't think you can swap it for something else.
@@mtb-mag Wolf Tooth now do a Spesh version.
How tall are you and what size is the bike?
Nice build! Do you think Zeb would be overkill for Evo? I'll be swaping frames soon (enduro to new evo s-works).
bought a 38 for my evo i see now reason why it would be bad, i also did a link swap so it’s now 160mm rear travel to match that 38 well
@@tannerstines4783 Nice! What link did you get?
Yo! Thanks. I don't think the Zeb would be overkill. For me personally, I did try a 38 on this bike and went back to a 36 after a few rides. It was fine, but I wanted to try to keep the bike lighter and more tilted toward an all rounder. I would probably go Zeb over Lyrik but 36 over 38 with my reasoning being that the 36 is slightly beefier than a Lyrik. I'm not sure if that makes any sense, but it's my rationale. Ha!
Anyone know if you can buy the black air cap and black knobs on the fork??
Those caps were off of a special colorway 36 with the rootbeer lowers. Not sure if it's available aftermarket...
@@mtb-mag Thanks! Yeah, wasn’t able to find anything. Bike looks sick.
Frame size?
S6 / Large!