Shop Work: Adding a Miter Saw Shadow Line
ฝัง
- เผยแพร่เมื่อ 25 ก.ค. 2024
- Website: www.FishersShopOnline.com
Plans: www.FishersShopOnline.com/plans
Instagram: / fishersshop
Store: www.Amazon.com/shop/fishersshop
T-Shirts: www.FishersShopOnline.com/store
Podcast: webuiltathing.libsyn.com/
Join Fisher's Shop!
/ @fishersshop
Lasers are cool, but they definitely have some setbacks when it comes to miter saws. In this video, I add a cheap and easy-to-install modification to my miter saw that enables me to make my cuts faster as well as improves my accuracy. Check out this video to see just how easy it is to add a shadow line to your miter saw and to see first-hand how it can be quite an upgrade for your shop!
LED Sewing Light: amzn.to/3cEyHLc
Cable Clips: amzn.to/3AKVLzS
00:00 - Intro
01:00 - Cutting Methods
01:40 - Miter Saw Laser
02:59 - Cutting on the Right
04:33 - The Plan
05:14 - Unboxing
05:30 - Modifying & Install
09:24 - Testing
11:17 - Review
13:05 - Outtakes
Affiliates:
SurfPrepSanding.com - "FISHER10" to save 10%
Starbond.com - "FISHER10" to save 10%
Mag-Tools.com - "FISHER10" to save 10%
BitsBits.com - "FISHER10" to save 10%
RZmask.com - "FISHER10" to save 10%
Bumblechutes.com - "FISHER10" to save 10%
The most impressive part of this video is that you actually remembered where you put the washer after you originally removed and replaced it with the laser.
Haha, I stuffed it into the laser packaging and had it in the cabinet below. I figured one day I might need it again.
Placing it in a spot you won't lose it is usually the best way to never find it again... 😂
That's exactly what I was about to comment! 😂
You took the words out of my mouth.
This is exactly what would happen to me and would be delayed finishing until I was able to order a new washer😂😂😂😂
Your neighbor is so generous for giving you a lot of their stuff without complaints
Should move closer to him...
The miter saw I bought, (Bauer 10") came with a shadow line feature built in. It makes accurate cuts very easy.
Is this the Bauer saw from Harbor Freight? How is it overall in terms of accuracy and build quality? TIA
I have a Ryobi miter saw with a shadow line. It makes very accurate cuts.
@@darrenfetty6880 same here, it definitely helps setting but I find it just abit better than a laser line
Shadow line should have been standard on every saw many years ago. I fully support this act of rebellion against Bosch’s incorrect choices. Well done!
Hehe, thanks!
GREAT project Drew, your neighbor got off easy on this one! !! !!!
Outstanding idea. Very clever. Thanks for sharing.
Thank you for this video. I figured it would take a much brighter light for this. This is just what the Bosch miter saw needs.
Glad it was helpful!
After two months of waiting for parts to arrive and a bit of procrastination, I finally got around to installing my own light to my mitre saw. Thanks Drew for your inspiration 🙂
Awesome! Hope you like it
I love how fate seems to work. The laser on my miter saw died yesterday and I was looking for a way to fix/replace it when your video came into my feed!
Perfect! :)
Another genius idea from the Fisher Shop Think-tank. Outstanding effort with perfect execution. You never disappoint.
Thanks, Clyde
As usual, an excellent video. Thanks for your all your time and generosity in posting this.
My pleasure!
Great video! The part of the video that taught about accounting for your blade with cut accuracy is a lesson that needs to be taught to new wood workers more often. My mind blew when I first learned it.
Absolutely!
love the candid reels, also keep up the great work!!
Amazing! Great idea!
This is the first of your videos I've seen and when you started attaching the light to the saw you had me in stitches. Definitely entertaining but also a great suggestion!
Thanks! :)
I have those lights on every machine in the shop. Really helps old eyes.
Sure does
Great mod, Drew! I love the same type blade light on my Dewalt DW780 (added an aftermarket light kit to my 779 and made it a 780). Saved some $$ buying the DW779 and adding the light kit to make it identical to the 780.
Thanks for sharing those tips and the make!
You bet!
That's awesome......it would really be a helpful addition to the miter saw! Of course, I always enjoy your sense of humor too!!!
Thanks 👍
That's cool way of lining things up
Nice video and love the mod. I did something like this on my saw (same saw as yours), but put a tiny 12V power supply inside the handle (there is lots of space in there, and access to the mains AC) and used a momentary switch to power the LED when the saw's safety slide is engaged to the right. It seems like it might be a hassle, but you only get a good shadow line when you bring the blade down anyway, so it really doesn't add any burden and then you never accidentally leave it on and you don't have to plug in 2 different things.
Did you make a video or plans?
As an Alabamamian through and through……I commend you sir for choosing the highest quality chrome for your daily needs!
Hahaha!
Hey Drew, I have the exact saw that you have and will be adding this light. Thanks for all the great ideas you continue to share with us. Love your videos!
Awesome! Thank you!
same
Great idea. And I love how it creates mood lighting in the shop.
Now you can re-use the laser for your pet sharks.
Frickin' laser beams!
Such a cool addition! What an awesome idea Drew!
Thanks man!
Nice mod. The laser on the Festool Kapex works much like your shadow line. It's a dashed line on each side of the blade that is interrupted by the teeth of the blade, making it look dashed when the blade is not spinning. It also works independently from the blade rotation.
I have some of those little lights on my band saw and drill press. They are super useful. They come in black and gray as well.
This is amazing!
Some great information but the best part of the video is your dry humor. I love it. Thanks.
Thanks 👍
I have the exact same saw and I find it very accurate & square at all times. Love it. I too am going to try your shadow line hack, I think it's brilliant. Thanks for taking the time to share it. Your dusk extraction really interests me too, that is the only complain I have with that saw, a real dust maker.
Have fun with the mod!
Great upgrade and explanation of why you wanted this feature over the laser. As always, well done man!
Thanks!
Some miter saws come with that light shadow feature alread installed like my DeWalt miter saw and its perfect for cutting accuracy I love it
Thanks for the video. I'll definitely being doing this.
Right on. I recommend securing it in there with screws. Something more than hot glue just to be safe.
I was thinking of adding the strip lights just as you had mentioned you tried. Your solution is perfect, and these lights are bright, as I already have them on the bandsaw and drill press. Thanks again for your helpful videos.
Glad it was helpful
Great idea Drew.
Great video. I just finished installing it on my saw. Thanks
Enjoy it
I used your idea on my 12 Bosch glide and it works fantastic
Glad it helped
I really need this setup for the shadow...thanks!
That’s brilliant!
Thanks so much for this!! I just bought this saw and was so unhappy that it had only the laser. This is one of the only two drawbacks of this saw that I expect to experience (the other being dust collection), but I am glad that you've solved this one! Thanks so much for sharing!!
Glad I could help!
I did this a while back to my Delta saw before they came out with the 2nd gen that had it built in. I scavenged one of those free Harbor Freight LED lights and put a switch on it. The whole thing ran on batteries so no electrical cord needed though my next step was to wire it into the power from the saw itself so I still didn't need a separate outlet. Shadow line is great!
Genius. I have the same saw and will be adding this mod. Thank you 😊
Glad to help
This is on Festool saw as well. Well done! 👍🏻👌🏻
This is Awesome. I was just getting ready to add the laser, but I think I may have to rethink that now.
Thanks man!
Thanks for posting! That's a cool mod. Quoting Uriah Heep from 1971..."Don't be afraid, just look at yourself."
You make great videos! I love the addition of your humor! This was a great idea! I followed your video to the T. Except for cutting the too close to the switch body which required some soldering to connect, everything went smooth as silk. It's impressive just how accurate that shadow line is! Thanks!
Glad it was helpful!
I added this to my Bosch saw. Worked great thank you.
Glad it helped
Thanks for you knowledge
Perfect timing, I had just installed one of those laser washers on my saw and wasn't impressed. I also have the 12" Bosch saw so your idea should work great for me as well - I just ordered the lights. Thanks for the Video!
You bet! Have fun
As much as I wanted the Bosch, I opted for the Delta Cruizer 12" axial glide saw for this very reason. I love the shadow line! I am happy to see it can be retrofitted to such a good saw as well.
You and me both!
Nicely done!
Thanks!
Awesome video! I’m ordering the LEDs right now for my Bosch miter saw. Thanks for the excellent video!
Glad I could help!
Did this on my Makita ls1019 using a board mounted cree super bright LED. was SUCH a game changer.
runs of an LI-ION pack. SO MUCH BETTER than a laser
Great video as always! Thanks!
Thanks for watching
Great idea Drew, thanks for the humor also!
You bet!
Great idea, Drew. Back before LED lights like that were available, I bought a device called a Laserkerf. It mounts under the motor and shines a beam the exact width of the blade and right where the blade will cut. It still works great.
Bill
That sounds like a good solution too
I use an identical light on my drill press. It’s a lot brighter than the one that came on it when it was new 35 years ago.
I was thinking to myself, Drew never really gets behind his projects, then you go and show you actually do.
Lol love your outtakes. Great idea im going to do that to my saw.
Sharing is Caring
Thankz 👍🏾
That is a super idea.
That's awesome Drew! I really appreciate sharing this idea.
You bet! Thanks for watching
Brilliant and entertaining video. I hope your neighbor figured out what was wrong with his car radio.
killer video, thank you Fisher!
You bet!
Great Video!
Great video! Thanks. I’m planning on installing this on my miter saw this weekend. Keep up the great work… God Bless
Thanks, you too!
I have a cheap mitre saw for rough cutting which has a lazer, I had to dig all of the sawdust out 3 times within the first 30 minutes of using it so I gave up on the lazer and went back to just looking at the blade lol
Drew… I like it!!!
Cold starts vary with each blade. Every time I change one, I have to make a bunch of cuts to find out how much kerf the wobble/vibration will consume.
Sneaky cuts are good as long as you don’t need to use the off cut. They require a trim cut to clean up the start end.
I like the idea of using a shadow instead of a light to demarcate the cutting area… Clever thinking bud!
Glad it was helpful! Thanks for watching
i did enjoy it!
Great hack!! Love the videos btw!
Glad you like them!
OMG, BRILLIANT! The set up process seems tedious and difficult, but it's not really.
BTW, you crack me up. "Alabama chrome" ... never heard that one, but from now on ...
I'm doing this with my saw.
Glad you liked it!
I highly recommend these lights! While my Hercules comes with the shadow line light, I use these sewing lights on my band saw and on my drill press. They are awesome!
That's where I have my other two. I love'em
You're humor is great!
Thanks! :)
Great modification .
I also dig the humor.
Thanks 👍
Thanks for sharing. This has been a growing frustration and as you pointed out lazers have their drawbacks. Definitely goi g to try this out.
Glad it was helpful!
Best idea yet!
Thanks!
Wow. This is so cool. I just bought a miter that I use for things like cutting firewood, 2x4s for my fire pit and fingers. This will work great. Thanks Drew!
Haha! Thanks for watching, neighbor!
Great idea!
Thanks, Keith
Interesting to see how Bosch changed the blade guard with that cast in place piece. I did the same mod to my Bosch a few years back with the same sewing light for a video. Glad someone figured out a way to get It into the next version of the saw!
Right on! I new I wasn't the first to do this but nevertheless, I was thrilled with how well it worked out.
@@FishersShop once you have that shadow line you can’t go back!
@@MakeEverything Yeah for sure! I'm loving it. I reinforced it a bit more with screws though. I started to get paranoid that it would come loose.
Incredible
Genius, thanks for the tip.
You bet!
love your sense of humor
😉
Great tip. I have these same lights on my bandsaw and lathe. 👍
Right on
Genius. Thanks mate.
Glad it helped
Great video and great humor 😂 Thanks!
Glad you enjoyed it!
I appreciate this video. I ordered a similar light (I think the same one, different brand) and installed it. It works pretty good in the garage, but my garage is pretty bright so it's faint. The only thing I did differently was drill a hole so I could run the wires out the back to keep it a little cleaner. And that I used hot glue to pin the wires across the saw, so we will see if that holds up. Thanks again for the idea and video.
Glad it helped
“Alabama chrome!” Awesome 😂
My new Delta came with the led that makes a blade shadow and it works well.
Great idea, I have the 10” Bosch so I’ll give it a go, thanks
That light does not fit in the 10", it is too wide.
@@jamesthomas4080 bummer
Awesome, Love it man!
You aint even finished watchin yet
@@memyselfandtau4712 But I love every minute of it!
Glad to hear it!
Is there any reason you could not reverse the light? Drill a small hole at the top of the pocket that the light fits in and run the wire out the top. That way your wire has less exposure and doesn’t have to be sticking out of the bottom of the saw. The only downside is it would minimize you “Chrome” accent strips.
I could, but I just don't care how ugly my saw looks. haha
I thought that immediately after I saw the wires going from front to back. Good catch!
@@FishersShop I'd make sure the power cord is protected. If those wire jackets ever tear, the guard or other metal parts could become energized. I would recommend, at a minimum, adding a few layers of heat shrink to help protect those wires. You could also use crimp on connectors instead of wire nuts so you can heat sink the whole thing as one cable.
Also buy your self a pair of wire strippers, a cheap pair is $5, and a good one is about $20.
@@notme232 if you are talking about the wires coming out of the LED head and to the switch, those wires are running low voltage DC. Which is not particularly dangerous.
On the other hand, if the blade catches a wire somehow, who knows what that wire could physically do at high speed?
@@jimweisgram9185 I had considered that it was DC, but with out knowing for sure if the dc converter is happening in the switch (witch is more likely) or in the led head, I figured leave it be. Either way protecting the cables is a good idea for longevity.
Very well done and I love your dry sense of humor. A new subscriber here because of that.
Awesome, thank you!
Great idea adding the lights to the miter saw, I need to try that! I've been using the same light on my bandsaw for a couple months, it makes a huge difference in visibility. I hard wired the light's power cable to the switch of the bandsaw, so it always has power and doesn't need the second plug/extension.
Dewalt has a very accurate and bright shadow light and is very accurate with all the pre set angles. I would recommend!!
Yeah? I bet it don't come with Alabama chrome!
Just requires an aircraft carrier for a bench. Good for trim carpenters though (as long as their back doesn’t go out).
new sub here. brilliant simplicity. love it.
as a tool and die maker of several years that dabbles in wood working i some times drive my self crazy trying to apply to tight of tolerance with wood working tools. eye's going bad don't help. will be giving this a try on my miter saw and maybe other applications.
thanks👍👍
Thanks! And welcome to the channel
I got a DeWalt 10" That I got for construction work. It came with a shadowline, and I never knew that wasn't standard. So that's something I learned today, thanks for that! This will make it another thing to look for when I want to upgrade my little 10" to a proper 12"
Yeah, not all come with one, sadly.
My old miter saw just died and I got a newer one and it actually came with the shadow line light. I was shocked at first and it took some getting used to as I was used to the laser of my old saw. This is great that you can let people diy their own addon to their existing saws.
Yeah, but once you get used to it, you won't ever wanna go back.
What saw did you purchase? I would like to check it out and more than likely buy.
@@lincolndotson3613 A Ryobi 10" Sliding Compound Miter Saw, I've had good luck with Ryobi's. Used my last one hard the past five years to do all sorts of projects. Built my loft with it. It was an older model and had the laser. The new one has the blade shadow.
Perfect timing, Drew. I have the exact same saw, and my one disappointment is the lack of a shadow line. Adding one has been on my to-do list since I bought it, and now you've shown me exactly how to do it. No excuses! Thanks, man.
Right on
Suggestion: drill a hole and feed the wires out the back. Then wire the light into the saw switch.
@@paulvolkmann2979 I didn't want to drill into my saw incase I ever want to resell it. Plus, I didn't want it hooked up to the saw switch because I did all my "cold setting" before I pull the trigger to turn on the saw.
Great video Drew. My Ridgid sliding saw has that shadow light built in. Dead on too!
After watching this video like 3 times I went to see about how I can add a shadow light and you are right ridgid sliding saw has it. I have been missing out all these years. And 💯 dead on! What else have I been missing
Brilliance. Gotta say.
Everyone loved your idea! Now this product is 'currently not available' on both the US & Canadian amazon websites! 6 Sept 2022
Haha, oops!